Impact of inter-judge agreement on perceptual judgment of nasality

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Medições de áreas por fotografias aéreas, em escala nominal, comparadas com a área obtida em fotografias com escalas corrigidas por meio de um SIG

Land use management has becoming a very important activity. Aerial photo interpretation is a basic resource and constitutes in a technique which enables infinite refining. Agricultural development and land use require a careful initial planning in order not only to protect them against superficial changing provoked by natural phenomenon but also to gradually develop its productive capacity. For the efficiency of land management, it is necessary to access correct and detailed information which can be available through aerial images of remote sensing. The use of vertical aerial photography through Remote Sensing has become more common in boundary survey projects, management and exploration, mainly because it substitutes, with lots of advantage, for cartographic bases, besides offering detailed characteristics, eliminating access difficulties in inaccessible areas, as well as facilitating a tridimensional view once it increases map efficiency and accuracy by combining field and laboratory work with photography interpretation. This work, using panchromatic aerial photography in nominal scale 1:25000 (1962), 1:45000 (1977) , and approximate nominal scale of 1:30.000, originating from aerial survey obtained in 2005, aimed at showing through the Geographic Information System (GIS) the possibility of developing a more complete and accurate analysis of the area values, obtained directly from photos without scale correction, and after comparing it with area values obtained from aerial photography with correct scale referred in IGC (Brazilian Cartography and Geography Institute) guidelines, resulting in an error coefficient which shows area differences through two proposed study. Considering the aerial photography in three different years: 1962, 1977 and 2005 it is possible to affirm that the 2005’s images presented lower values of area difference (43, 48 square meters) than determined area values in reference chart and the 2005’s colored images has facilitated the photo interpretation of the landscape, becoming accurate the confronting traces and among land owners and consequently offering precision during land marking.

Interferências linguísticas e interlíngua: a aprendizagem de Português Língua Estrangeira por peruanos hispanofalantes

Pós-graduação em Linguística e Língua Portuguesa - FCLAR

From the terrible loneliness to the wonderful agreement of human beings

What would be the ""terrible loneliness"" and what would be the ""wonderful agreement"" in the present paper? The ""terrible loneliness"" is the only reality that a person perceives and/or thinks during the now going on. For the person, an enormous quantity of occurrences is in the present moment absent. A very small quantity of occurrences is present. The person is the only being in having this. And, this is only during a little moment. The person never thinks about his loneliness in this moment. On the contrary, he thinks he is plenty of people and full of occurrences. But, if he were thinking about reality, he would live in a terrible loneliness. How does he escape himself from this loneliness? He thinks that the probable occurrences are real occurrences. He may be right in a plenty of times. Going through what I call opening hypotheses-basic hypotheses and non-basic but important hypotheses-and going through what I call simply hypotheses he is able to sanction a wonderful agreement of human beings about the known parts of the Universe. However, they are hypotheses, not absolute realities.

Delineation of vertebral area on the coronal plane using three-dimensional ultrasonography advanced volume contrast imaging (VCI) Omni view: intrarater reliability and agreement using standard mouse, high definition mouse, and pen-tablet

Objective: To assess the fetal lumbosacral spine by three-dimensional (3D) ultrasonography using volume contrast imaging (VCI) omni view method and compare reproducibility and agreement between three different measurement techniques: standard mouse, high definition mouse and pen-tablet. Methods: A comparative and prospective study with 40 pregnant women between 20 and 34+6 weeks was realized. 3D volume datasets of the fetal spine were acquired using a convex transabdominal transducer. Starting scan plane was the coronal section of fetal lumbosacral spine by VCI-C function. Omni view manual trace was selected and a parallel plane of fetal spine was drawn including interest region. Intraclass correlation coefficient (ICC) was used for reproducibility analysis. The relative difference between three used techniques was compared by chi-square test and Fischer test. Results: Pen-tablet showed better reliability (ICC = 0.987). In the relative proportion of differences, this was significantly higher for the pen-tablet (82.14%; p < 0.01). In paired comparison, the relative difference was significantly greater for the pen-tablet (p < 0.01). Conclusion: The pen-tablet showed to be the most reproductive and concordant method in the measurement of body vertebral area of fetal lumbosacral spine by 3D ultrasonography using the VCI.

Evaluation of the agreement by examiners according to classifications of third molars

Objectives. This study recorded and evaluated the intra-and inter-group agreement degree by different examiners for the classification of lower third molars according to both the Winter's and Pell & Gregory's systems. Study Design. An observational and cross-sectional study was realized with forty lower third molars analyzed from twenty digital panoramic radiographs. Four examiner groups (undergraduates, maxillofacial surgeons, oral radiologists and clinical dentists) from Aracaju, Sergipe, Brazil, classified them in relation to angulation, class and position. The variance test (ANOVA) was applied in the examiner findings with significance level of p<0.05 and confidence intervals of 95%. Results. Intra- and inter-group agreement was observed in Winter's classification system among all examiners. Pell & Gregory's classification system showed an average intra-group agreement and a statistical significant difference to position variable in inter-group analysis with greater disagreement to the clinical dentists group (p<0.05). Conclusions. High reproducibility was associated to Winter's classification, whereas the system proposed by Pell & Gregory did not demonstrate appropriate levels of reliability.

Incomplete fissures in severe emphysematous patients evaluated with MDCT: Incidence and interobserver agreement among radiologists and pneumologists

Objective: Pulmonary fissures completeness predicts efficacy in endobronchial valves (EBV) implantation, a new lobar volume reduction therapy for severe emphysematous patients. We assessed the incidence of incomplete fissures and the interobserver agreement in its evaluation with MDCT, in severe emphysematous patients prior to EBV implantation. Materials and Methods: Volumetric thin-section CT scans of 35 patients (CODP GOLD 3/4, heterogeneous emphysema) were retrospectively reviewed by 2 pneumologists, 1 general and 2 experienced chest radiologists, independently and blinded for treatment outcome, and the pulmonary fissures were classified as either complete or incomplete. Interobserver agreement was assessed with Kappa index (KI). Results: Agreement between all readers for the left oblique, right oblique and horizontal fissure was, respectively, moderate (KI = 0.53), fair (KI = 0.37) and moderate (KI = 0.42). Highest agreement (99/105 fissures) was observed among experienced radiologists, being for left oblique, right oblique and horizontal, respectively, almost perfect (KI = 0.79), perfect (KI = 1.0) and moderate (KI = 0.52). These 2 reviewers found that all of 35 patients had at least one incomplete fissure, with a proportion of incomplete fissures assigned as 74/65%, 85/85% and 91/88%, respectively for the left oblique, right oblique and horizontal fissures. Conclusions: Pneumologists and radiologists agreed fairly to moderately in fissures analysis, while the experienced chest radiologists reached the highest clinically adequate agreement of 94%. We believe that clinical routine visual analysis of the fissures integrity can be done with a good degree of confidence in MDCT images, and experienced readers might be required. Also, a higher than expected incidence of incomplete fissures was described in our studied population. (C) 2012 Elsevier Ireland Ltd. All rights reserved.

Biometry and fetal weight estimation by two-dimensional and three-dimensional ultrasonography: an intraobserver and interobserver reliability and agreement study

Objective To evaluate and compare the intraobserver and interobserver reliability and agreement for the biparietal diameter (BPD), abdominal circumference (AC), femur length (FL) and estimated fetal weight (EFW) obtained by two-dimensional ultrasound (2D-US) and three-dimensional ultrasound (3D-US). Methods Singleton pregnant women between 24 and 40 weeks were invited to participate in this study. They were examined using 2D-US in a blinded manner, twice by one observer, intercalated by a scan by a second observer, to determine BPD, AC and FL. In each of the three examinations, three 3D-US datasets (head, abdomen and thigh) were acquired for measurements of the same parameters. We determined EFW using Hadlock's formula. Systematic errors between 3D-US and 2D-US were examined using the paired t-test. Reliability and agreement were assessed by intraclass correlation coefficients (ICCs), limits of agreement (LoA), SD of differences and proportion of differences below arbitrary points. Results We evaluated 102 singleton pregnancies. No significant systematic error between 2D-US and 3D-US was observed. The ICC values were higher for 3D-US in both intra- and interobserver evaluations; however, only for FL was there no overlap in the 95% CI. The LoA values were wider for 2D-US, suggesting that random errors were smaller when using 3D-US. Additionally, we observed that the SD values determined from 3D-US differences were smaller than those obtained for 2D-US. Higher proportions of differences were below the arbitrarily defined cut-off points when using 3D-US. Conclusion 3D-US improved the reliability and agreement of fetal measurements and EFW compared with 2D-US.

Monte Carlo Semi-Empirical Model for Si(Li) X-Ray Detector: Differences between Nominal and Fitted Parameters.

A detailed characterization of a X-ray Si(Li) detector was performed to obtain the energy dependence of efficiency in the photon energy range of 6.4 - 59.5 keV. which was measured and reproduced by Monte Carlo (MC) simulations. Significant discrepancies between MC and experimental values were found when lhe manufacturer parameters of lhe detector were used in lhe simulation. A complete Computerized Tomagraphy (CT) detector scan allowed to find the correct crystal dimensions and position inside the capsule. The computed efficiencies with the resulting detector model differed with the measured values no more than 10% in most of the energy range.

Essays on Wage and Price Formation in Sweden

Study IReal Wage Determination in the Swedish Engineering Industry This study uses the monopoly union model to examine the determination of real wages and in particular the effects of active labour market programmes (ALMPs) on real wages in the engineering industry. Quarterly data for the period 1970:1 to 1996:4 are used in a cointegration framework, utilising the Johansen's maximum likelihood procedure. On a basis of the Johansen (trace) test results, vector error correction (VEC) models are created in order to model the determination of real wages in the engineering industry. The estimation results support the presence of a long-run wage-raising effect to rises in the labour productivity, in the tax wedge, in the alternative real consumer wage and in real UI benefits. The estimation results also support the presence of a long-run wage-raising effect due to positive changes in the participation rates regarding ALMPs, relief jobs and labour market training. This could be interpreted as meaning that the possibility of being a participant in an ALMP increases the utility for workers of not being employed in the industry, which in turn could increase real wages in the industry in the long run. Finally, the estimation results show evidence of a long-run wage-reducing effect due to positive changes in the unemployment rate. Study IIIntersectoral Wage Linkages in Sweden The purpose of this study is to investigate whether the wage-setting in certain sectors of the Swedish economy affects the wage-setting in other sectors. The theoretical background is the Scandinavian model of inflation, which states that the wage-setting in the sectors exposed to international competition affects the wage-setting in the sheltered sectors of the economy. The Johansen maximum likelihood cointegration approach is applied to quarterly data on Swedish sector wages for the period 1980:1–2002:2. Different vector error correction (VEC) models are created, based on assumptions as to which sectors are exposed to international competition and which are not. The adaptability of wages between sectors is then tested by imposing restrictions on the estimated VEC models. Finally, Granger causality tests are performed in the different restricted/unrestricted VEC models to test for sector wage leadership. The empirical results indicate considerable adaptability in wages as between manufacturing, construction, the wholesale and retail trade, the central government sector and the municipalities and county councils sector. This is consistent with the assumptions of the Scandinavian model. Further, the empirical results indicate a low level of adaptability in wages as between the financial sector and manufacturing, and between the financial sector and the two public sectors. The Granger causality tests provide strong evidence for the presence of intersectoral wage causality, but no evidence of a wage-leading role in line with the assumptions of the Scandinavian model for any of the sectors. Study IIIWage and Price Determination in the Private Sector in Sweden The purpose of this study is to analyse wage and price determination in the private sector in Sweden during the period 1980–2003. The theoretical background is a variant of the “Imperfect competition model of inflation”, which assumes imperfect competition in the labour and product markets. According to the model wages and prices are determined as a result of a “battle of mark-ups” between trade unions and firms. The Johansen maximum likelihood cointegration approach is applied to quarterly Swedish data on consumer prices, import prices, private-sector nominal wages, private-sector labour productivity and the total unemployment rate for the period 1980:1–2003:3. The chosen cointegration rank of the estimated vector error correction (VEC) model is two. Thus, two cointegration relations are assumed: one for private-sector nominal wage determination and one for consumer price determination. The estimation results indicate that an increase of consumer prices by one per cent lifts private-sector nominal wages by 0.8 per cent. Furthermore, an increase of private-sector nominal wages by one per cent increases consumer prices by one per cent. An increase of one percentage point in the total unemployment rate reduces private-sector nominal wages by about 4.5 per cent. The long-run effects of private-sector labour productivity and import prices on consumer prices are about –1.2 and 0.3 per cent, respectively. The Rehnberg agreement during 1991–92 and the monetary policy shift in 1993 affected the determination of private-sector nominal wages, private-sector labour productivity, import prices and the total unemployment rate. The “offensive” devaluation of the Swedish krona by 16 per cent in 1982:4, and the start of a floating Swedish krona and the substantial depreciation of the krona at this time affected the determination of import prices.

La composición nominal en español

Programa de Filología Española. Doctorado en Filología Española.

Excellent agreement between genetic and hydrogen breath tests for lactase deficiency and the role of extended symptom assessment

Clinical manifestations of lactase (LCT) deficiency include intestinal and extra-intestinal symptoms. Lactose hydrogen breath test (H2-BT) is considered the gold standard to evaluate LCT deficiency (LD). Recently, the single-nucleotide polymorphism C/T(-13910) has been associated with LD. The objectives of the present study were to evaluate the agreement between genetic testing of LCT C/T(-13910) and lactose H2-BT, and the diagnostic value of extended symptom assessment. Of the 201 patients included in the study, 194 (139 females; mean age 38, range 17-79 years, and 55 males, mean age 38, range 18-68 years) patients with clinical suspicion of LD underwent a 3-4 h H2-BT and genetic testing for LCT C/T(-13910). Patients rated five intestinal and four extra-intestinal symptoms during the H2-BT and then at home for the following 48 h. Declaring H2-BT as the gold standard, the CC(-13910) genotype had a sensitivity of 97% and a specificity of 95% with a of 0.9 in diagnosing LCT deficiency. Patients with LD had more intense intestinal symptoms 4 h following the lactose challenge included in the H2-BT. We found no difference in the intensity of extra-intestinal symptoms between patients with and without LD. Symptom assessment yielded differences for intestinal symptoms abdominal pain, bloating, borborygmi and diarrhoea between 120 min and 4 h after oral lactose challenge. Extra-intestinal symptoms (dizziness, headache and myalgia) and extension of symptom assessment up to 48 h did not consistently show different results. In conclusion, genetic testing has an excellent agreement with the standard lactose H2-BT, and it may replace breath testing for the diagnosis of LD. Extended symptom scores and assessment of extra-intestinal symptoms have limited diagnostic value in the evaluation of LD.