Cognitive Development of Very Low Birth Weight Children from Infancy to Pre-school Age

The survival of preterm born infants has increased but the prevalence of long-term morbidities has still remained high. Preterm born children are at an increased risk for various developmental impairments including both severe neurological deficits as well as deficits in cognitive development. According to the literature the developmental outcome perspective differs between countries, centers, and eras. Definitions of preterm infant vary between studies, and the follow-up has been carried out with diverse methods making the comparison less reliable. It is essential to offer parents upto-date information about the outcome of preterm infants born in the same area. A centralized follow-up of children at risk makes it possible to monitor the consequences of changes in the treatment practices of hospitals on developmental outcome. This thesis is part of a larger regional, prospective multidisciplinary follow-up project entitled “Development and Functioning of Very Low Birth Weight Infants from Infancy to School Age” (PIeniPAinoisten RIskilasten käyttäytyminen ja toimintakyky imeväisiästä kouluikään, PIPARI). The thesis consists of four original studies that present data of very low birth weight (VLBW) infants born between 2001 and 2006, who are followed up from the neonatal period until the age of five years. The main outcome measure was cognitive development and secondary outcomes were significant neurological deficits (cerebral palsy, CP, deafness, and blindness). In Study I, the early crying and fussing behavior of preterm infants was studied using parental diaries, and the relation of crying behavior and cognitive and motor development at the age of two years was assessed. In Study II, the developmental outcome (cognitive, CP, deafness, and blindness) at the age of two years was studied in relation to demographic, antenatal, neonatal, and brain imaging data. Development was studied in relationship to a full-term born control group born in the same hospital. In Study III, the stability of cognitive development was studied in VLBW and full-term groups by comparing the outcomes at the ages of two and five years. Finally, in Study IV the precursors of reading skills (phonological processing, rapid automatized naming, and letter knowledge) were assessed for VLBW and full-term children at the age of five years. Pre-reading skills were studied in relation to demographic, antenatal, neonatal, and brain imaging data. The main findings of the thesis were that VLBW infants who fussed or cried more in the infancy were not at greater risk for problems in their cognitive development. However, crying was associated with poorer motor development. The developmental outcome of the present population was better that has been reported earlier and this improvement covered also cognitive development. However, the difference to fullterm born peers was still significant. Major brain pathology and intestinal perforation were independent significant risk factors for adverse outcome, also when several individual risk factors were controlled for. Cognitive development at the age of two years was strongly related with development at the age of five years, stressing the importance of the early assessment, and the possibility for early interventions. Finally, VLBW children had poorer pre-reading skills compared with their full-term born peers, but the IQ was an important mediator even when children with mental retardation were excluded from the analysis. The findings suggest that counseling parents about the developmental perspectives of their preterm infant should be based on data covering the same birth hospital. Neonatal brain imaging data and neonatal morbidity are important predictors for developmental outcome. The findings of the present study stress the importance of both short-term (two years) and long-term (five years) follow-ups for the individual, and for improving the quality of care.

Enhancing absorptive capacity in a non-research and development. An action research approach to converting individual observations into organisational awareness

The ability to recognize potential knowledge and convert it into business opportunities is one of the key factors of renewal in uncertain environments. This thesis examines absorptive capacity in the context of non-research and development innovation, with a primary focus on the social interaction that facilitates the absorption of knowledge. It proposes that everyone is and should be entitled to take part in the social interaction that shapes individual observations into innovations. Both innovation and absorptive capacity have been traditionally related to research and development departments and institutions. These innovations need to be adopted and adapted by others. This so-called waterfall model of innovations is only one aspect of new knowledge generation and innovation. In addition to this Science–Technology–Innovation perspective, more attention has been recently paid to the Doing–Using–Interacting mode of generating new knowledge and innovations. The amount of literature on absorptive capacity is vast, yet the concept is reified. The greater part of the literature links absorptive capacity to research and development departments. Some publications have focused on the nature of absorptive capacity in practice and the role of social interaction in enhancing it. Recent literature on absorptive capacity calls for studies that shed light on the relationship between individual absorptive capacity and organisational absorptive capacity. There has also been a call to examine absorptive capacity in non-research and development environments. Drawing on the literature on employee-driven innovation and social capital, this thesis looks at how individual observations and ideas are converted into something that an organisation can use. The critical phases of absorptive capacity, during which the ideas of individuals are incorporated into a group context, are assimilation and transformation. These two phases are seen as complementary: whereas assimilation is the application of easy-to-accept knowledge, transformation challenges the current way of thinking. The two require distinct kinds of social interaction and practices. The results of this study can been crystallised thus: “Enhancing absorptive capacity in practicebased non-research and development context is to organise the optimal circumstances for social interaction. Every individual is a potential source of signals leading to innovations. The individual, thus, recognises opportunities and acquires signals. Through the social interaction processes of assimilation and transformation, these signals are processed into the organisation’s reality and language. The conditions of creative social capital facilitate the interplay between assimilation and transformation. An organisation that strives for employee-driven innovation gains the benefits of a broader surface for opportunity recognition and faster absorption.” If organisations and managers become more aware of the benefits of enhancing absorptive capacity in practice, they have reason to assign resources to those practices that facilitate the creation of absorptive capacity. By recognising the underlying social mechanisms and structural features that lead either to assimilation or transformation, it is easier to balance between renewal and effective operations.

Climate driven changes in temperature, pH and food quality : effects on copepod reproduction

Increased emissions of greenhouse gases into the atmosphere are causing an anthropogenic climate change. The resulting global warming challenges the ability of organisms to adapt to the new temperature conditions. However, warming is not the only major threat. In marine environments, dissolution of carbon dioxide from the atmosphere causes a decrease in surface water pH, the so called ocean acidification. The temperature and acidification effects can interact, and create even larger problems for the marine flora and fauna than either of the effects would cause alone. I have used Baltic calanoid copepods (crustacean zooplankton) as my research object and studied their growth and stress responses using climate predictions projected for the next century. I have studied both direct temperature and pH effects on copepods, and indirect effects via their food: the changing phytoplankton spring bloom composition and toxic cyanobacterium. The main aims of my thesis were: 1) to find out how warming and acidification combined with a toxic cyanobacterium affect copepod reproductive success (egg production, egg viability, egg hatching success, offspring development) and oxidative balance (antioxidant capacity, oxidative damage), and 2) to reveal the possible food quality effects of spring phytoplankton bloom composition dominated by diatoms or dinoflagellates on reproducing copepods (egg production, egg hatching, RNA:DNA ratio). The two copepod genera used, Acartia sp. and Eurytemora affinis are the dominating mesozooplankton taxa (0.2 – 2 mm) in my study area the Gulf of Finland. The 20°C temperature seems to be within the tolerance limits of Acartia spp., because copepods can adapt to the temperature phenotypically by adjusting their body size. Copepods are also able to tolerate a pH decrease of 0.4 from present values, but the combination of warm water and decreased pH causes problems for them. In my studies, the copepod oxidative balance was negatively influenced by the interaction of these two environmental factors, and egg and nauplii production were lower at 20°C and lower pH, than at 20°C and ambient pH. However, presence of toxic cyanobacterium Nodularia spumigena improved the copepod oxidative balance and helped to resist the environmental stress, in question. In addition, adaptive maternal effects seem to be an important adaptation mechanism in a changing environment, but it depends on the condition of the female copepod and her diet how much she can invest in her offspring. I did not find systematic food quality difference between diatoms and dinoflagellates. There are both good and bad diatom and dinoflagellate species. Instead, the dominating species in the phytoplankton bloom composition has a central role in determining the food quality, although copepods aim at obtaining as a balanced diet as possible by foraging on several species. If the dominating species is of poor quality it can cause stress when ingested, or lead to non-optimal foraging if rejected. My thesis demonstrates that climate change induced water temperature and pH changes can cause problems to Baltic Sea copepod communities. However, their resilience depends substantially on their diet, and therefore the response of phytoplankton to the environmental changes. As copepods are an important link in pelagic food webs, their future success can have far reaching consequences, for example on fish stocks.

Professional development among educators pursuing a B.Ed. program in special education in Tanzania : a study of motives and perceived outcomes

Implementation of different policies and plans aiming at providing education for all is a challenge in Tanzania. The need for educators and professionals with relevant knowledge and qualifications in special education is substantial. Teacher education does not equip educators with sufficient knowledge and skills in special education and professional development programs in special education are few in number. Up to 2005 no degree programs in special education at university level were available in Tanzania. The B.Ed. Special Education program offered by the Open University of Tanzania in collaboration with Åbo Akademi University in Finland was one of the efforts aimed at addressing the big national need for teachers and other professionals with degree qualifications in special education. This pilot program offered unique possibilities to study professional development in Tanzania. The research group in this study consisted of the group of students who participated in the degree program 2005-2007. The study is guided by three theoretical perspectives: individual, social and societal. The individual perspective emphasizes psychological factors as motives, motivation, achievement, self-directed behavior and personal growth. Within social perspective, professional development is viewed as situated within the social and cultural context. The third perspective, the societal, focuses on change, reforms, innovations and transformation of school systems and societies. Accordingly, professional development is viewed as an individual, social and societal phenomenon. The overall aim of the study is to explore the participants’ motives for participating in a B.Ed. Special Education program and the perceived outcomes of the program in terms of professional development. In order to achieve the objectives of the study, a case study approach was adopted. Questionnaires and semi-structured interviews were administered in three waves between January 2007 and February 2009 to the 35 educators participating in the B.Ed. Special Education program. The findings of the study reveal that the participants expressed motives which were related to job performance, knowledge, skills, academic degree and career. Also altruistic motives were expressed by the participants in terms of helping and supporting students with special needs and their communities. The perceived outcomes of the program were in line with the expressed motives. However, the results indicate that the participants also learned new skills, as interaction skills and guidance and counseling skills. Increased self-confidence was also mentioned as an outcome. The participants also got deepened understanding of disability issues. In addition, they learned strategies for creating awareness of persons with disability in the communities. Thus the findings of the study indicate positive outcomes of the program in terms of professional development. The conclusion of the study is that individual, social and societal factors interact when it comes to explaining why Tanzanian educators in special education choose to pursue a degree program in special education. The individual motives, as increased knowledge and better prospects of career development interact with the social and societal motives to help and support vulnerable student groups. The study contributes to increased understanding of the complexity of professional development and of the realities educators meet when educational reforms are implemented in a developing country.

Technological development of 40mg furosemide tablets: equivalence and bioavaibility study in dogs

Furosemide (40mg) was administered to 20 street dogs, 10 males and 10 females, in two different pharmaceutical forms: (1) compressed furosemide 40mg formulated at the Federal University of Pernambuco (UFPE-tablet), and (2) a commercial formulation with equal bioequivalence produced by the Laboratory for Pharmaceutical Technology of Pernambuco State (LAFEPE), the LAFEPE-furosemide. The study aimed to evaluate the kinetics of dissolution of the UFPE-tablet in order to analyze the behavior of bioavailability of the best formulation for veterinary use. The plasmatic concentrations of furosemide for the determination of parameters of pharmacological kinetics were analyzed by high-performance liquid chromatographic method (HPLC). The in vitro study accomplished through physiochemical analyses demonstrated that the formulas of the furosemide tablets attained the pharmaceutical requirements in agreement with USP 23 and the Brazilian Pharmacopoeia. The evaluation accomplished in dogs with UFPE-tablets given in only dose demonstrated uniformity in blood levels indicating stability in maintenance of the pharmaceutical formulation and efficiency in absorption of the active compound. These values are not significantly different in relation to the 5% confidence limit. Regarding maximum concentration (Tmax) time and global bioavaibility assessed by AUC means, there were no considerable differences as well. UFPE-furosemide displayed 743.492µg/mL.h as AUC average value whereas LAFEPE-furosemide had an average of 537.284µg/mL.h.

Development of a three-dimensional nonlinear viscoelastic constitutive model of solid propellant

A three dimensional nonlinear viscoelastic constitutive model for the solid propellant is developed. In their earlier work, the authors have developed an isotropic constitutive model and verified it for one dimensional case. In the present work, the validity of the model is extended to three-dimensional cases. Large deformation, dewetting and cyclic loading effects are treated as the main sources of nonlinear behavior of the solid propellant. Viscoelastic dewetting criteria is used and the softening of the solid propellant due to dewetting is treated by the modulus decrease. The nonlinearities during cyclic loading are accounted for by the functions of the octahedral shear strain measure. The constitutive equation is implemented into a finite element code for the analysis of propellant grains. A commercial finite element package ‘ABAQUS’ is used for the analysis and the model is introduced into the code through a user subroutine. The model is evaluated with different loading conditions and the predicted values are in good agreement with the measured ones. The resulting model applied to analyze a solid propellant grain for the thermal cycling load.

Design and validation of stateful composite RESTful web services

A web service is a software system that provides a machine-processable interface to the other machines over the network using different Internet protocols. They are being increasingly used in the industry in order to automate different tasks and offer services to a wider audience. The REST architectural style aims at producing scalable and extensible web services using technologies that play well with the existing tools and infrastructure of the web. It provides a uniform set of operation that can be used to invoke a CRUD interface (create, retrieve, update and delete) of a web service. The stateless behavior of the service interface requires that every request to a resource is independent of the previous ones facilitating scalability. Automated systems, e.g., hotel reservation systems, provide advanced scenarios for stateful services that require a certain sequence of requests that must be followed in order to fulfill the service goals. Designing and developing such services for advanced scenarios with REST constraints require rigorous approaches that are capable of creating web services that can be trusted for their behavior. Systems that can be trusted for their behavior can be termed as dependable systems. This thesis presents an integrated design, analysis and validation approach that facilitates the service developer to create dependable and stateful REST web services. The main contribution of this thesis is that we provide a novel model-driven methodology to design behavioral REST web service interfaces and their compositions. The behavioral interfaces provide information on what methods can be invoked on a service and the pre- and post-conditions of these methods. The methodology uses Unified Modeling Language (UML), as the modeling language, which has a wide user base and has mature tools that are continuously evolving. We have used UML class diagram and UML state machine diagram with additional design constraints to provide resource and behavioral models, respectively, for designing REST web service interfaces. These service design models serve as a specification document and the information presented in them have manifold applications. The service design models also contain information about the time and domain requirements of the service that can help in requirement traceability which is an important part of our approach. Requirement traceability helps in capturing faults in the design models and other elements of software development environment by tracing back and forth the unfulfilled requirements of the service. The information about service actors is also included in the design models which is required for authenticating the service requests by authorized actors since not all types of users have access to all the resources. In addition, following our design approach, the service developer can ensure that the designed web service interfaces will be REST compliant. The second contribution of this thesis is consistency analysis of the behavioral REST interfaces. To overcome the inconsistency problem and design errors in our service models, we have used semantic technologies. The REST interfaces are represented in web ontology language, OWL2, that can be part of the semantic web. These interfaces are used with OWL 2 reasoners to check unsatisfiable concepts which result in implementations that fail. This work is fully automated thanks to the implemented translation tool and the existing OWL 2 reasoners. The third contribution of this thesis is the verification and validation of REST web services. We have used model checking techniques with UPPAAL model checker for this purpose. The timed automata of UML based service design models are generated with our transformation tool that are verified for their basic characteristics like deadlock freedom, liveness, reachability and safety. The implementation of a web service is tested using a black-box testing approach. Test cases are generated from the UPPAAL timed automata and using the online testing tool, UPPAAL TRON, the service implementation is validated at runtime against its specifications. Requirement traceability is also addressed in our validation approach with which we can see what service goals are met and trace back the unfulfilled service goals to detect the faults in the design models. A final contribution of the thesis is an implementation of behavioral REST interfaces and service monitors from the service design models. The partial code generation tool creates code skeletons of REST web services with method pre and post-conditions. The preconditions of methods constrain the user to invoke the stateful REST service under the right conditions and the post condition constraint the service developer to implement the right functionality. The details of the methods can be manually inserted by the developer as required. We do not target complete automation because we focus only on the interface aspects of the web service. The applicability of the approach is demonstrated with a pedagogical example of a hotel room booking service and a relatively complex worked example of holiday booking service taken from the industrial context. The former example presents a simple explanation of the approach and the later worked example shows how stateful and timed web services offering complex scenarios and involving other web services can be constructed using our approach.

Flexible multibody dynamics and intelligent control of a hydraulically driven hybrid redundant robot machine

The assembly and maintenance of the International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV) is highly challenging since the tasks performed by the robot involve welding, material handling, and machine cutting from inside the VV. The VV is made of stainless steel, which has poor machinability and tends to work harden very rapidly, and all the machining operations need to be carried out from inside of the ITER VV. A general industrial robot cannot be used due to its poor stiffness in the heavy duty machining process, and this will cause many problems, such as poor surface quality, tool damage, low accuracy. Therefore, one of the most suitable options should be a light weight mobile robot which is able to move around inside of the VV and perform different machining tasks by replacing different cutting tools. Reducing the mass of the robot manipulators offers many advantages: reduced material costs, reduced power consumption, the possibility of using smaller actuators, and a higher payload-to-robot weight ratio. Offsetting these advantages, the lighter weight robot is more flexible, which makes it more difficult to control. To achieve good machining surface quality, the tracking of the end effector must be accurate, and an accurate model for a more flexible robot must be constructed. This thesis studies the dynamics and control of a 10 degree-of-freedom (DOF) redundant hybrid robot (4-DOF serial mechanism and 6-DOF 6-UPS hexapod parallel mechanisms) hydraulically driven with flexible rods under the influence of machining forces. Firstly, the flexibility of the bodies is described using the floating frame of reference method (FFRF). A finite element model (FEM) provided the Craig-Bampton (CB) modes needed for the FFRF. A dynamic model of the system of six closed loop mechanisms was assembled using the constrained Lagrange equations and the Lagrange multiplier method. Subsequently, the reaction forces between the parallel and serial parts were used to study the dynamics of the serial robot. A PID control based on position predictions was implemented independently to control the hydraulic cylinders of the robot. Secondly, in machining, to achieve greater end effector trajectory tracking accuracy for surface quality, a robust control of the actuators for the flexible link has to be deduced. This thesis investigates the intelligent control of a hydraulically driven parallel robot part based on the dynamic model and two schemes of intelligent control for a hydraulically driven parallel mechanism based on the dynamic model: (1) a fuzzy-PID self-tuning controller composed of the conventional PID control and with fuzzy logic, and (2) adaptive neuro-fuzzy inference system-PID (ANFIS-PID) self-tuning of the gains of the PID controller, which are implemented independently to control each hydraulic cylinder of the parallel mechanism based on rod length predictions. The serial component of the hybrid robot can be analyzed using the equilibrium of reaction forces at the universal joint connections of the hexa-element. To achieve precise positional control of the end effector for maximum precision machining, the hydraulic cylinder should be controlled to hold the hexa-element. Thirdly, a finite element approach of multibody systems using the Special Euclidean group SE(3) framework is presented for a parallel mechanism with flexible piston rods under the influence of machining forces. The flexibility of the bodies is described using the nonlinear interpolation method with an exponential map. The equations of motion take the form of a differential algebraic equation on a Lie group, which is solved using a Lie group time integration scheme. The method relies on the local description of motions, so that it provides a singularity-free formulation, and no parameterization of the nodal variables needs to be introduced. The flexible slider constraint is formulated using a Lie group and used for modeling a flexible rod sliding inside a cylinder. The dynamic model of the system of six closed loop mechanisms was assembled using Hamilton’s principle and the Lagrange multiplier method. A linearized hydraulic control system based on rod length predictions was implemented independently to control the hydraulic cylinders. Consequently, the results of the simulations demonstrating the behavior of the robot machine are presented for each case study. In conclusion, this thesis studies the dynamic analysis of a special hybrid (serialparallel) robot for the above-mentioned special task involving the ITER and investigates different control algorithms that can significantly improve machining performance. These analyses and results provide valuable insight into the design and control of the parallel robot with flexible rods.

Challenges in managing large-scale agile software development transformation

Adapting and scaling up agile concepts, which are characterized by iterative, self-directed, customer value focused methods, may not be a simple endeavor. This thesis concentrates on studying challenges in a large-scale agile software development transformation in order to enhance understanding and bring insight into the underlying factors for such emerging challenges. This topic is approached through understanding the concepts of agility and different methods compared to traditional plan-driven processes, complex adaptive theory and the impact of organizational culture on agile transformational efforts. The empirical part was conducted by a qualitative case study approach. The internationally operating software development case organization had a year of experience of an agile transformation effort during it had also undergone organizational realignment efforts. The primary data collection was conducted through semi-structured interviews supported by participatory observation. As a result the identified challenges were categorized under four broad themes: organizational, management, team dynamics and process related. The identified challenges indicate that agility is a multifaceted concept. Agile practices may bring visibility in issues of which many are embedded in the organizational culture or in the management style. Viewing software development as a complex adaptive system could facilitate understanding of the underpinning philosophy and eventually solving the issues: interactions are more important than processes and solving a complex problem, such a novel software development, requires constant feedback and adaptation to changing requirements. Furthermore, an agile implementation seems to be unique in nature, and agents engaged in the interaction are the pivotal part of the success of achieving agility. In case agility is not a strategic choice for whole organization, it seems additional issues may arise due to different ways of working in different parts of an organization. Lastly, detailed suggestions to mitigate the challenges of the case organization are provided.

Effects of prenatal exposure to a mild chronic variable stress on body weight, preweaning mortality and rat behavior

Early stimulation has been shown to produce long-lasting effects in many species. Prenatal exposure to some strong stressors may affect development of the nervous system leading to behavioral impairment in adult life. The purpose of the present work was to study the postnatal harmful effects of exposure to variable mild stresses in rats during pregnancy. Female Holtzman rats were submitted daily to one session of a chronic variable stress (CVS) during pregnancy (prenatal stress; PS group). Control pregnant rats (C group) were undisturbed. The pups of PS and C dams were weighed and separated into two groups 48 h after delivery. One group was maintained with their own dams (PS group, N = 70; C group, N = 36) while the other PS pups were cross-fostered with C dams (PSF group, N = 47) and the other C pups were cross-fostered with PS dams (CF group, N = 58). Pups were undisturbed until weaning (postnatal day 28). The male offspring underwent motor activity tests (day 28), enriched environment tests (day 37) and social interaction tests (day 42) in an animal activity monitor. Body weight was recorded on days 2, 28 and 60. The PS pups showed lower birth weight than C pups (Duncan's test, P<0.05). The PS pups suckling with their stressed mothers displayed greater preweaning mortality (C: 23%, PS: 60%; c2 test, P<0.05) and lower body weight than controls at days 28 and 60 (Duncan's test, P<0.05 and P<0.01, respectively). The PS, PSF and CF groups showed lower motor activity scores than controls when tested at day 28 (Duncan's test, P<0.01 for PS group and P<0.05 for CF and PSF groups). In the enriched environment test performed on day 37, between-group differences in total motor activity were not detected; however, the PS, CF and PSF groups displayed less exploration time than controls (Duncan's test, P<0.05). Only the PS group showed impaired motor activity and impaired social behavior at day 42 (Duncan's test, P<0.05). In fact, CVS treatment during gestation plus suckling with a previously stressed mother caused long-lasting physical and behavioral changes in rats. Cross-fostering PS-exposed pups to a dam which was not submitted to stress counteracted most of the harmful effects of the treatment. It is probable that prenatal stress plus suckling from a previously stressed mother can induce long-lasting changes in the neurotransmitter systems involved in emotional regulation. Further experiments using neurochemical and pharmacological approaches would be interesting in this model.

Informaatiopalveluiden muutosvoimat, muutokset ja liikkuvuusesteet

Tutkimuksessa kartoitettiin informaatiopalveluiden liiketoiminta-alueella Suomessa toimivien yritysten maantieteellisiä ja palvelukohtaisia strategisia valintoja ja näissä tapahtuneita muutoksia. Tutkimuksen tavoitteena oli selvittää informaatiopalveluiden määritelmää ja strategisten ryhmien teoriaa apuna käyttäen mahdollisia muutoksia informaatiopalveluja Suomessa kuluttajille tarjoavien yritysten perinteisissä toimialoissa tutkimuksen kattamina vuosina 2007–2012. Edelleen tavoitteena oli kuvata yleisten muutosvoimien ja alaan vaikuttavien megatrendien sekä alalla havaittujen liikkuvuusesteiden avulla liiketoimintaympäristössä tapahtuneita muutoksia ja pyrkiä löytämään näihin muutoksiin vaikuttavia syitä. Yrityksiä analysoitiin vuosikertomusten perusteella ja tutkimusotteena käytettiin grounded theoryä. Informaatiopalveluilla tarkoitetaan tietotekniikka-, tietoliikenne-, kustannus- ja audiovisuaalisen toiminnan palveluja. Suoritettujen ryhmittelyjen perusteella pystyttiin havaitsemaan, että osa tutkittavista yrityksistä oli laajentanut toimintaansa perinteisten toimialarajojensa ulkopuolelle johonkin toiseen informaatiopalveluiden liiketoiminta-alueella olevaan toimialaan. Aineistosta ei muodostunut perinteisten toimialajaottelujen mukaisia yritysryhmiä. Suurimmat muutokset näyttivät tapahtuneen perinteisen tietoliikennepalveluiden toimialalla. Vuosikertomuksista tunnistettuja yritysten liiketoimintaympäristössä tapahtuneita muutoksia ja niihin vaikuttavia liikkuvuusesteitä ja muita palveluiden laajuuteen ja alueelliseen ulottuvuuteen vaikuttavia seikkoja ryhmiteltiin yhteiskuntasuhteiden kehikkoon kategorioihin: poliittiset ja lainsäädännölliset, teknologiset, sosiaaliset ja kulttuuriset, fyysiset, taloudelliset ja ekologiset tekijät. Muutosvoimista globalisaatio ja teknologinen kehitys vaikuttavat voimakkaasti ja muovaavat informaatiopalveluiden liiketoiminta-alueen yrityksiä. Internetin nopea kasvu, tiedon digitalisoituminen ja rajattoman, aina läsnä olevan viestinnän lisääntyminen ovat vaikuttaneet kuluttajien käyttäytymiseen luomalla ajasta ja paikasta riippumattoman viestimien ja palveluiden hyödyntämisen. Näiden mega-trendien vaikutus välittyy vuosikertomuksista. Juridiset ja poliittiset tekijät vaikuttavat voimakkaasti informaatiopalveluiden alueella eikä lainsäädäntö näytä vielä riittävästi tukevan innovatiivisia digitaalisia globaaleita palveluja vaan muodostaa liik-kuvuusesteitä. Kuluttajakäyttäytyminen muovaa markkinoita ja edistää teknologista kehitystä. Ala on ollut hyvin teknologiavetoinen, mutta vuosikertomusten perusteella olisi pääteltävissä, että asiakasnäkökulma on tutkimusvuosien aikana vahvistunut. Asiakaskäyttäytyminen ja siihen liittyvät tiedot tuovat tulevaisuudessa kilpailuetua.

Pup age and aggressive behavior in lactating rats

High levels of aggressive behaviors against intruders in the nest area are displayed by female rats during the first 10 days after delivery, declining thereafter to very low levels, even though lactation continues. Cross-fostering experiments were undertaken to test the hypothesis that pup age may affect aggression in lactating rats. The behavior of females on the 8th day after delivery when raising fostered 8-day-old pups was compared to that of females on the 8th postpartum day raising older pups (18 days old) for the last 5 days, and females on the 18th day after delivery raising fostered 18-day-old pups were compared to females in the same postpartum period nursing younger pups (8 days of age at the time of the maternal aggression test) for 5 days. Pup retrieval activity and plasma prolactin level were also analyzed. Females on the 8th postpartum day nursing 18-day-old pups were less aggressive than females in the same postpartum period, but with 8-day-old pups. Likewise, females on the 18th postpartum day nursing younger pups were more aggressive and presented higher levels of prolactin than females nursing older pups. Thus, pup development can alter the natural decline of maternal aggressive behavior.

Dopaminergic modulation of grooming behavior in virgin and pregnant rats

Dopamine receptors are involved in the expression of grooming behavior. The pregnancy-induced increase in self-licking observed in rats is important for mammary gland development and lactation. This study focuses on the role of dopamine receptor subtypes in grooming behavior of virgin and pregnant female rats. General and mammary gland grooming were measured in virgin rats treated with 0.25 mg/kg of the D1-like agonist SKF-81297 and antagonist SKF-83566 and the D2-like agonist lisuride and antagonist sulpiride. The effects of 0.01 and 0.25 mg/kg doses of the same agonists and antagonists were evaluated in pregnant rats as well. In virgin animals both SKF-83566 and sulpiride treatments significantly reduced the time spent in general grooming, while none of the dopamine agonists was able to significantly change any parameter of general grooming. Time spent in grooming directed at the mammary glands was not affected significantly by any of the drug treatments in virgin rats. All drugs tested significantly decreased the frequency of and the time spent with general grooming, while SKF-81297 treatment alone did not significantly reduce the duration of mammary gland grooming in pregnant rats. These data show that in female rats the behavioral effects of D1-like and D2-like dopamine receptor stimulation and blockade differ according to physiological state. The results suggest that dopamine receptors may play specific roles modulating grooming behavior in pregnant rats. Since grooming of the mammary gland during pregnancy may influence lactation, this aspect is relevant for studies regarding the perinatal use of dopamine-related drugs.

Reproductive experience influences grooming behavior during pregnancy in rats

The pregnancy-induced increase in self-licking observed in rats is important for mammary gland development and lactation. Reproductive experience has epidemiologial implications such as a decrease in the incidence of mammary gland cancer in women and it also influences various behavioral, neurochemical and endocrine parameters. The aim of the present study was to investigate the influence of reproductive experience on grooming behavior patterns during pregnancy in rats. Self-grooming behavior was measured in age-matched virgin, primi- and multigravid (days 7, 8, 9, 19, and 20 of pregnancy) rats. General grooming (head, forelimbs and shoulders) was not significantly different among virgin, primi- and multigravid rats during pregnancy. Confirming previous work, pregnant rats spent significantly more time in specific grooming (mammary glands, nipple lines, genital and pelvic regions) than did virgin animals. In addition, self- licking of mammary glands was significantly increased in multi- as compared to primigravid rats on days 8, 9, 19 and 20 of pregnancy. The increase in mammary gland grooming observed in multigravid rats appears to be a consequence of previous reproductive experience. These data show that reproductive experience modulates mammary gland grooming during pregnancy, possibly contributing to successful reproduction.

Supplier segmentation and development in project business

The purpose of this study was to expand the applicability of supplier segmentation and development approaches to the project-driven construction industry. These practices are less exploited and not well documented in this operational environment compared to the process-centric manufacturing industry. At first, portfolio models to supply base segmentation and various supplier development efforts were investigated in literature review. A step-wise framework was structured for the empirical research. The empirical study employed multiple research methods in three case studies in a large Finnish construction company. The first study categorized the construction item classes into the purchasing portfolio and positioned suppliers to the power matrix by investigating buyer-supplier relations. Using statistical tests, the study also identified factors that affect suppliers’ performance. The final case study identified improvement areas of the interface between a main contractor and one if its largest suppliers. The final results indicate that only by assessing the supply base in a holistic manner and the power circumstances in it, buyers comprehend how to best establish appropriate supplier development strategies in the project environment.