453 resultados para ATG-CY


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Abstract : Wastepaper sludge ash (WSA) is generated by a cogeneration station by burning wastepaper sludge. It mainly consists of amorphous aluminosilicate phase, anhydrite, gehlenite, calcite, lime, C2S, C3A, quartz, anorthite, traces of mayenite. Because of its free lime content (~10%), WSA suspension has a high pH (13). Previous researchers have found that the WSA composition has poor robustness and the variations lead to some unsoundness for Portland cement (PC) blended WSA concrete. This thesis focused on the use of WSA in different types of concrete mixes to avoid the deleterious effect of the expansion due to the WSA hydration. As a result, WSA were used in making alkali-activated materials (AAMs) as a precursor source and as a potential activator in consideration of its amorphous content and the high alkaline nature. Moreover, the autogenous shrinkage behavior of PC concrete at low w/b ratio was used in order to compensate the expansion effect due to WSA. The concrete properties as well as the volume change were investigated for the modified WSA blended concrete. The reaction mechanism and microstructure of newly formed binder were evaluated by X-ray diffraction (XRD), calorimetry, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). When WSA was used as precursor, the results showed incompatible reaction between WSA and alkaline solution. The mixtures were not workable and provided very low compressive strength no matter what kinds of chemical activators were used. This was due to the metallic aluminum in WSA, which releases abundant hydrogen gas when WSA reacts with strong alkaline solution. Besides, the results of this thesis showed that WSA can activate the glassy phase contained in slag, glass powder (GP) and class F fly ash (FFA) with an optimum blended ratio of 50:50. The WSA/slag (mass ratio of 50:50) mortar (w/b of 0.47) attained 46 MPa at 28 days without heat curing assistance. A significant fast setting was noticed for the WSA-activated binder due to the C3A phase, free lime and metallic aluminum contained in the WSA. Adding 5% of gypsum can delay the fast setting, but this greatly increased the potential risk of intern sulfate attack. The XRD, TGA and calorimetry analyses demonstrated the formation of ettringite, C-S-H, portlandite, hydrogarnet and calcium carboaluminate in the hydrated binder. The mechanical performance of different binder was closely related to the microstructure of corresponding binder which was proved by the SEM observation. The hydrated WSA/slag and WSA/FFA binder formed a C-A-S-H type of gel with lower Ca/Si ratio (0.47~1.6). A hybrid gel (i.e. C-N-A-S-H) was observed for the WSA/GP binder with a very low Ca/Si ratio (0.26) and Na/Si ratio (0.03). The SEM/EDX analyses displayed the formation of expansive gel (ettringite and thaumasite) in the gypsum added WSA/slag concrete. The gradual emission of hydrogen gas due to the reaction of WSA with alkaline environment significantly increased the porosity and degraded the microstructure of hydrated matrix after the setting. In the last phase of this research WSA-PC blended binder was tailored to form a high autogenous shrinkage concrete in order to compensate the initial expansion. Different binders were proportioned with PC, WSA, silica fume or slag. The microstructure and mechanical properties of concrete can be improved by decreasing w/b ratios and by incorporating silica fume or slag. The 28-day compressive strength of WSA-blended concrete was above 22 MPa and reached 45 MPa when silica fume was added. The PC concrete incorporating silica fume or slag tended to develop higher autogenous shrinkage at low w/b ratios, and thus the ternary binder with the addition of WSA inhibited the long term shrinkage due to the initial expansion property to WSA. In the restrained shrinkage test, the concrete ring incorporating the ternary binder (PC/WSA/slag) revealed negligible potential to cracking up to 96 days as a result of the offset effect by WSA expansion. The WSA blended regular concrete could be produced for potential applications with reduced expansion, good mechanical property and lower permeability.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Brazil has a great diversity of native fruits, which are not always widely consumed, being sold only in certain regions, due to their difficulty of post-harvest conservation. One such fruit is yellow guava, interesting source of nutrients. To promote the consumption and use of this fruit to the consumer public in different regions of the country, this study evaluated the incorporation of yellow Ya-cy araçá in formulating a cereal bar. Therefore, fruits were evaluated for their chemical, physical and chemical characteristics and bioactive compounds in different stages of maturation yellow guava (green, mature and dried forms). The behavior of guava yellow front of to UV-C radiation was also evaluated. After these reviews, there was obtained yellow ripe guava flour after previous tests, was added to the base formulation cereal bar. For the experimental planning and development of the formulations was used factorial design 22 with a central point. The developed formulations were subjected to sensory evaluation using for treatment of multivariate data analysis (Principal Component Analysis- ACP). The preferred formulation in sensory evaluation was evaluated in their physical characteristics (texture), physical-chemical (moisture, ash, lipids, proteins, carbohydrates, dietary fiber and calorie), mineral content and fatty acid profile. The results indicated that the added yellow guava cereal bar developed in this study is one way to application and use of guava, increasing the consumption of fruit to different regions of the country, and can be considered a functional product, not only to contain the fruit in its composition, but also to present many beneficial nutrients that contribute to the health of consumers.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Abstract : Natural materials have received a full attention in many applications because they are degradable and derived directly from earth. In addition to these benefits, natural materials can be obtained from renewable resources such as plants (i.e. cellulosic fibers like flax, hemp, jute, and etc). Being cheap and light in weight, the cellulosic natural fiber is a good candidate for reinforcing bio-based polymer composites. However, the hydrophilic nature -resulted from the presence of hydroxyl groups in the structure of these fibers- restricts the application of these fibers in the polymeric matrices. This is because of weak interfacial adhesion, and difficulties in mixing due to poor wettability of the fibers within the matrices. Many attempts have been done to modify surface properties of natural fibers including physical, chemical, and physico-chemical treatments but on the one hand, these treatments are unable to cure the intrinsic defects of the surface of the fibers and on the other hand they cannot improve moisture, and alkali resistance of the fibers. However, the creation of a thin film on the fibers would achieve the mentioned objectives. This study aims firstly to functionalize the flax fibers by using selective oxidation of hydroxyl groups existed in cellulose structure to pave the way for better adhesion of subsequent amphiphilic TiO[subscript 2] thin films created by Sol-Gel technique. This method is capable of creating a very thin layer of metallic oxide on a substrate. In the next step, the effect of oxidation on the interfacial adhesion between the TiO[subscript 2] film and the fiber and thus on the physical and mechanical properties of the fiber was characterized. Eventually, the TiO[subscript 2] grafted fibers with and without oxidation were used to reinforce poly lactic acid (PLA). Tensile, impact, and short beam shear tests were performed to characterize the mechanical properties while Thermogravimetric analysis (TGA), Differential Scanning Calorimetry (DSC), Dynamic mechanical analysis (DMA), and moisture absorption were used to show the physical properties of the composites. Results showed a significant increase in physical and mechanical properties of flax fibers when the fibers were oxidized prior to TiO[subscript 2] grafting. Moreover, the TiO[subscript 2] grafted oxidized fiber caused significant changes when they were used as reinforcements in PLA. A higher interfacial strength and less amount of water absorption were obtained in comparison with the reference samples.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Filologii Polskiej i Klasycznej

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Prawa i Administracji: Katedra Prawa Konstytucyjnego

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Biologii: Instytut Biologii Molekularnej i Biotechnologii

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Lata 2003–2004 to okres zamykający etap przygotowawczy do przystąpienia Polski do Unii Europejskiej, w szczególności w zakresie dostosowywania polskich rozwiązań prawnych i instytucjonalnych do standardów unijnych. Dwa wydarzenia z tego czasu: referendum akcesyjne i pierwsze w Polsce wybory do Parlamentu Europejskiego stanowiły przy tym swoiste podsumowanie wieloletniej debaty publicznej nad kierunkami polskiej polityki zagranicznej oraz miejscem i rolą naszego kraju w ukształtowanych na początku lat 90. nowych warunkach geopolitycznych.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Fizyki: Zakład Teorii Ciała Stałego

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study brings closer the problems of a selected group with a handicap – deaf people for whom the main mode of communication is the Polish Sign Language. The subject of studies is leisure time, how it is spent by them both everyday and during vacation. The book presents a survey of literature, good practice and also results of the author’s own studies conducted in the years 2004-2010, concerning problems of tourism and recreation of the deaf. In the years 2008-2010 studies were conducted within the research project financed by Ministerstwo Nauki i Szkolnictwa Wyższego (the Ministry of Science and Higher Education). One of the results of work on this project are multimedia programmes – tourist guides: SITur and SITex containing a translator of the Polish Sign Language.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Główna problematyka zawarta w tekście dotyczy: (1) znaczenia i zakresu kryzysu w gospodarce i polityce, (2) przyjęcia przez państwo i społeczeństwo logiki racjonalności ekonomicznej jako paradygmatu postępowania, (3) przewartościowania pojęcia polityki, co wiąże się m.in. z przyjęciem przez rządzących roli zarządców wybranych sfer państwa oraz z posługiwaniem się przez nich logiką „mieszanej racjonalności” („logiką władzy” i „logiką racjonalności ekonomicznej”), (4) wyzwań związanych z dystrybucją dóbr, (5) reprezentacji i legitymizacji w demokracji liberalnej. Gospodarka kapitalistyczna wpływa na wszystkie sfery życia społecznego, co zmusza do przedstawienia jej „modus operandi”. Charakterystyczne cechy oddziaływania to: (1) racjonalność formalna, (2) dogmat efektywności i ilościowej mierzalności, (3) reprodukcja ideologii mówiącej o wolnej woli jednostki, niezależnie od kontekstu społecznego, (4) wymuszanie odpowiedniej dla siebie reprodukcji siły roboczej, (5) kolonizacja kolejnych sfer aktywności społecznej (np. edukacji i szkolnictwa wyższego), (6) wpływ na wykluczenie grup społecznych ze względu na poziom zabezpieczenia materialnego. Wszystko to sprowadzić można do pojęcia logiki racjonalności ekonomicznej. Rządzący posługują się „mieszaną strategią”, która oparta jest na dwóch logikach postępowania – (1) logice władzy, (2) logice racjonalności ekonomicznej. Logika władzy to nic innego jak dążenie do zdobycia i utrzymania władzy, gdzie władza sama w sobie staje się celem, natomiast struktury państwa stanowią przestrzeń, którą należy przejąć lub opanować. Rządzący aby ukryć swoją bezideowość i konflikty w walce o przejęcie struktur państwa uprawiają politykę „na zewnątrz”, która przyjmuje formę „festiwalu” agonicznego dyskursu. Taka polityka możliwa jest dzięki rozdawnictwu podczas redystrybucji dóbr (niezgodnie z racjonalnością ekonomiczną) lub/i dzięki instrumentalnemu traktowaniu dystrybucji uznania. W związku z niemożnością utrzymania wysokiego poziomu rozdawnictwa, szczególnie w sytuacji kryzysu gospodarczego, rządzący chętnie posługują się logiką racjonalności ekonomicznej. Rozwiązania oparte na racjonalności ekonomicznej, mimo ich negatywnego odbioru przez społeczeństwo, wprowadzane są przy zastosowaniu argumentacji zagrożenia bezpieczeństwa (gospodarczego, socjalnego, narodowego itd.). Tym samym państwo wycofuje się z rządzenia na rzecz zarządzania niektórymi sferami państwa. Nie można tego nazwać inaczej jak „ucieczką” od odpowiedzialności, co jest szczególnie zauważalne w sytuacjach destabilizacji gospodarczej. W takich sytuacjach mamy do czynienia z „outsourcingiem zadań” państwa, co przyjmować może różne formy – (1) przenoszenie funkcji na inne instytucje przy zachowaniu kompetencji kontrolnych lub (2) przenoszenie obowiązków na inne własne instytucje, które wcześniej pełniły inną rolę. Wszystko to można nazwać rekonfiguracją funkcji państwa w związku z dominacją gospodarki kapitalistycznej i oddziaływaniem logiki racjonalności ekonomicznej. W tekście podjęto również problem dystrybucji dóbr i uznania, jednakże jedynie w aspekcie jej instrumentalizacji przez rządzących. Można wysunąć tezę, że liberalne koncepcje wolności jednostki oraz priorytet dla własności prowadzą do łatwiejszego ideologicznego uzasadnienia stosowania mieszanych strategii i racjonalności. W tekście przedstawiono też tezę o instrumentalizacji dystrybucji dóbr, tzn. instrumentalnego wykorzystywania dowartościowania różnych mniejszości w ramach systemu politycznego. Należy też stwierdzić, że dominacja logiki wolnego rynku prowadzi do deprecjacji redystrybucji dóbr w stosunku do gloryfikacji problematyki uznania. Tekst jest jedynie zarysowaniem problematyki wyczerpywania się formuły demokracji liberalnej, co przedstawiono na wybranych zagadnieniach. Podjęty problem demokracji liberalnej nie skupia się na próbie odtworzenia modelu tego rodzaju demokracji, raczej ważniejsze było stwierdzenie przejmowania w działaniu czegoś, co można określić mianem logiki racjonalności ekonomicznej. Wartą dalszego analizowania jest sama logika „mieszanej racjonalności”, którą sprowadzono do przenikania się „logiki władzy” i „logiki racjonalności ekonomicznej”.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Nauk Politycznych i Dziennikarstwa

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Studiów Edukacyjnych

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Anglistyki

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Wydział Fizyki

Relevância:

10.00% 10.00%

Publicador:

Resumo:

W artykule w zakresie metody teologiczno-fundamentalnej przedstawione zostały następujące główne zagadnienia. 1. Konspekt edukacyjno-psychologicznych warsztatów, 2. Uzasadnienie metodyczne i metodologiczne przyjętej konstrukcji. W konspekcie szczegółowo opisane zostały kolejne kroki, które powinien podjąć prowadzący z pewnymi sugestiami ku czemu dane działania prowadzą. Szerzej zostały podane wnioski, do których prowadzący powinien podprowadzić uczestników warsztatów w obszarze teologii fundamentalnej – jako pomoc w poszukiwaniach celu, całości i sensu – wykorzystano elementy psychologii, filozofii, teologii duchowości. Procedura ćwiczeń przeprowadza uczestnika od pytań o samego siebie do pytań o siebie poprzez relacje z drugim, tak by uświadomić mu możliwość kontaktu z Drugim. W dalszej części przedstawienia opisano próbę odpowiedzi na pytanie „Co było potrzebne, od strony metody, by ten konspekt mógł powstać?” Koniecznym było skonstruowanie swoistej metafory i opracowano narrację, które razem stały się hipotezą wyjaśniającą obejmującą szerokie spektrum badanych relacji, pomiędzy konspektem i procesem jego powstawania a jego twórcą, procesem przeprowadzonych warsztatów a czytelnikiem, prowadzącym warsztaty a uczestnikiem. Na zakończenie przedstawiono ewaluację przeprowadzonych warsztatów.