Learning about Self Far From Home: A Pre-service Teacher’s Intercultural Development During an International Program

Preparing teachers to effectively teach culturally diverse students, teacher educators advocate for the use of cross-cultural field experiences, including international study abroad programs. This paper reports on a qualitative case study of two pre-service teachers’ intercultural development during a semester-long teacher education study abroad program in London, England. Findings indicate that international experiences provide a catalyst to move pre-service teachers forward in their intercultural development. Implications include the need for multicultural teacher educators to take a developmental approach to pre-service teacher education informed by theories of intercultural development and cultural learning developed within intercultural communications.

HEALTH STATUS - HEALTH SERVICE RESOURCES - ECONOSOCIOCULTURAL DEVELOPMENT: IMPLICATIONS FOR HEALTH CARE POLICY IN AFRICA

Rational health services planning requires an examination of the effects of various factors on the health status of a population within a given set of socioeconomic circumstances. The commonly accepted explanations for improved health in the less developed countries (LDCs) are: Health Service Resources available to a population, Environmental and Life conditions, and the Econosociocultural Characteristics of the population.^ In the context of the low economic base from which many LDCs initiate development activities, a strong imperative exists for identifying in which of these major areas public health policy would be most effective in terms of improving health. A new conceptual model is proposed that would be used for future policy analyses to assess what changes in health status of populations in LDCs can be expected as direct functions of increased health service resources, and of improved environmental and econosociocultural conditions.^ While direct policy analysis is ill-advised at this time due to data inadequacy, the model is illustrated using data presently available for twenty-five relatively homogeneous Sub-Sahara African countries. Within the limitations of available data, study findings indicate that while econosociocultural conditions were the most important explanatory factors of the three major independent variables in 1970, health service resources became the most important in 1975. Study findings are inconclusive at this time with regards to the relative contributions of physicians and medical assistants in explaining variances in mortality in these countries.^ Because of the deficient nature of available data, study findings should be interpreted very cautiously. Tests of statistical significance of study findings were by-passed because of their situational technical inappropriateness. This study is significant in being the first of its kind and scope to focus on the Sub-Sahara African region of the World Health Organization, using the Wroclaw Taxonomic Method in conjunction with a stepwise regression technique. It is desirable, therefore, to examine the observed magnitude and directional consistency of all hypothesized relationships, even if evidence is inconclusive. ^

Diverging Development Paths of the Electronics Industry in Korea and Taiwan

This paper examines the process and mechanism of economic development in the Republic of Korea and Taiwan through a comparative analysis of the electronics industry in each country. The paper will show that in its initial stage of development, the electronics industry in both economies had the same type of dual structure: a domestic demand sector based on the protected domestic market, and an export sector intended to capitalize on low-wage labor for the international market. However, this dual structure in the two economies faded away after the mid-1970s as their respective indigenous export-oriented enterprises began to develop. But the primary industrial players in each economy were very different. In Korea they were comprehensive electronics manufacturers affiliated with chaebols, and in Taiwan they were small and medium-size enterprises. Differences in the two economies' development mechanisms have brought about this divergence in development paths. In Korea this mechanism has been characterized by the government's positive role and the chaebol's readiness to react to the government's leadership. In Taiwan the development mechanism has been based on the private sector independent from the government. As an extension of such diverged development paths, ICs and personal computers showed spectacular growth in Korea and Taiwan after the 1980s. The development of ICs in Korea was primarily the result of a decisive role played by the chaebol's sizable financial resources, while the competitiveness in personal computers largely reflected the agility and flexibility of Taiwanese small and medium-size enterprises.

Theory of a Flowchart Approach to Industrial Cluster Policy

A flowchart approach to industrial cluster policy emphasizes the importance ofthe ordering of policy measures. The flow of policy implementation is to establish an industrial zone, to invite an anchor company, and to promote its related companies to invest in the industrial zone. This article delineated "a flowchart approach to industrial cluster policy" by proposing sufficient conditions for forming industrial clusters typical in the manufacturing industry in Asia to enhance regional economic growth. The typical industrial cluster policy was theorized by defining an industrial zone as "quasi-public goods", and it was shown that the policy enhances economic growth under a production function of "increasing returns to scale" of an anchor company. Critical amounts of the production of "scale economies" that are used by the related companies to decide whether or not to invest in clusters were also shown.

Factors Underlying the Formation of Industrial Clusters in Japan and Industrial Cluster Policy: A Quantitative Survey

The purpose of this report is to use information provided by a questionnaire survey to analyze the factors and processes underlying the formation of industrial clusters in Japan. The study, based on questionnaire surveys, forms part of an "Industrial Cluster Project". The Japanese government has implemented policies for industrial clusters so as to enable Japanese industries to maintain competitive power in global markets, and to aid the self-sufficient expansion of local industries. The government's project goes under the heading "Industry Agglomeration for the Recovery of Local Industries with respect to so-called "Industry Clusters." The authors aim to identify what expectations are held of government by the enterprises that make up industrial clusters. As part of our investigation, we used the results of a survey conducted by UNDP in 2004. Tsuji's study, published by the Osaka School of International Public Policy, surveyed 1198 small or medium sized manufacturing companies located in O ward, Tokyo and Higashi Osaka city, Osaka prefecture. The outcome of the present study, together with data from Tsuji's work on IT usage by SMEs in Japan, is meant to form the basis for policy design and implementation.

Industrial Clusters in India: Evidence from Automobile Clusters in Chennai and the National Capital Region

This study analyzes the patterns of agglomeration of some modern manufacturing sectors in India, and in particular the Indian automobile sector. It also examines and contrasts the factors that have led to different patterns of cluster development in two leading auto clusters in India-Chennai and the National Capital Region (NCR). Moreover, the study analyzes whether firms in clusters perform better than those that are excluded and whether the relative importance of variables that determine the behavior of firms differs among clusters. Our analyses, which employ a combination of quantitative and qualitative methods, show that Indian industrial clusters are largely concentrated in the three clustered regions: NCR, Mumbai-Pune, and Chennai-Bangalore, across different manufacturing sectors. Our study of the auto clusters in Chennai and the NCR find considerable differences in the patterns of cluster formation, due partly to the historical and policy conditions under which firms, particularly, the lead firms must operate. Moreover, our econometric analyses confirmed that being part of a cluster positively influences the performance of the auto component firms and those belonging to a cluster perform better.

Industrial Development and the Innovation System of the Ethanol Sector in Brazil

The purpose of this paper is to analyze innovations and the innovation system and its dynamics in the ethanol sector in the State of Sao Paulo. More specifically, this paper focuses on the development process in the sector, the public policies taken to promote the sector, and the organizations and key players involved in these policies and their responses to unforeseeable changes in economic, social and technological environments. To this end, this paper takes an historical perspective and reviews data on the cultivation of sugar cane, the production of ethanol, and on sugar cane yields as indicators of the innovations achieved in the sector. The geographical distribution of these indicators is also examined. Next, several cases in Piracicaba and Campinas in the State of Sao Paulo are presented; these give us a more concrete idea of the processes involved in innovation and technology transfer. Based on these observations, the ethanol cluster and the innovation system of the State of Sao Paulo are discussed from the viewpoint of the flowchart approach to industrial cluster policy.

Industrial Policy in Asia

This paper examines three types of industrialization that have occurred in East Asia: the Japanese, Chinese and generic Asian models. Industrial policies in Japan and the Republic of Korea (ROK) initially protected local companies from foreign investors by imposing high tariffs on foreign investors. But Japan began introducing liberalization policies to attract foreign direct investment (FDI) in the 1960s, and the ROK began to welcome foreign technology in the 1970s. Meanwhile, the governments of the ASEAN countries and Taiwan established export-processing zones (EPZ) to invite FDI by offering preferential treatment, such as tax deductions and exemptions. China adopted similar industrial policies and also established EPZs, attracting the capital and know-how of multinationals and thereby strengthening the international competitiveness of local enterprises. This paper reaches the following three conclusions. First, it would have been difficult for East Asian countries to grow without FDI. Second, central governments were a crucial factor in these countries' growth strategies. Third, EPZs offering preferential treatment can effectively enhance aggregate growth in developing countries, and the Asian experience shows that this strategy can be applied to other countries that satisfy certain preconditions.

Transformation of a Woodworking and Furniture Industrial District in Kampala, Uganda: Dichotomous Development of SME Cluster and Large Firm Sector

Clustering small manufacturers are believed to attain various types of collective efficiency. A woodworking and furniture SME district in Uganda has created a learning environment for artisans to start up their own workshops. In the district workers can access various managerial information including business skills and input materials easily than outside. Hence it attracted new entrants to follow and district growth continued. On contrary large firms are locating separately and dispersedly from SME district and have a negative image to SME. This dichotomy has been created partly through spatial division of two sectors and partly through policy favouritism toward large firms.

The Iron and Steel Industry in Asia: Development and Restructuring

The paper examines the development and restructuring of the iron and steel industry in Asian countries. Studying countries that have integrated steelworks with large blast furnaces (South Korea, Taiwan, China and India) and countries without (Thailand, Indonesia and Malaysia), the paper shows the difference in the development processes across the countries and across time, and points to the diversity of the development experience of these countries. The paper argues that significant differences in steel production technologies in terms of initial investment and minimum-efficient scale, the changing role of the state, and shifting demand structures in the domestic steel markets of each country have been the important factors that led to the differences in the development path of the steel industry in each country.

Application of user-centered design in the development of an atomated/assisted testing system for self-service devices

Automated Teller Machines (ATMs) are sensitive self-service systems that require important investments in security and testing. ATM certifications are testing processes for machines that integrate software components from different vendors and are performed before their deployment for public use. This project was originated from the need of optimization of the certification process in an ATM manufacturing company. The process identifies compatibility problems between software components through testing. It is composed by a huge number of manual user tasks that makes the process very expensive and error-prone. Moreover, it is not possible to fully automate the process as it requires human intervention for manipulating ATM peripherals. This project presented important challenges for the development team. First, this is a critical process, as all the ATM operations rely on the software under test. Second, the context of use of ATMs applications is vastly different from ordinary software. Third, ATMs’ useful lifetime is beyond 15 years and both new and old models need to be supported. Fourth, the know-how for efficient testing depends on each specialist and it is not explicitly documented. Fifth, the huge number of tests and their importance implies the need for user efficiency and accuracy. All these factors led us conclude that besides the technical challenges, the usability of the intended software solution was critical for the project success. This business context is the motivation of this Master Thesis project. Our proposal focused in the development process applied. By combining user-centered design (UCD) with agile development we ensured both the high priority of usability and the early mitigation of software development risks caused by all the technology constraints. We performed 23 development iterations and finally we were able to provide a working solution on time according to users’ expectations. The evaluation of the project was carried out through usability tests, where 4 real users participated in different tests in the real context of use. The results were positive, according to different metrics: error rate, efficiency, effectiveness, and user satisfaction. We discuss the problems found, the benefits and the lessons learned in the process. Finally, we measured the expected project benefits by comparing the effort required by the current and the new process (once the new software tool is adopted). The savings corresponded to 40% less effort (man-hours) per certification. Future work includes additional evaluation of product usability in a real scenario (with customers) and the measuring of benefits in terms of quality improvement.

Development and improvement of protection-system algorithms for ground-fault detection and location in synchronous machines

Uno de los defectos más frecuentes en los generadores síncronos son los defectos a tierra tanto en el devanado estatórico, como de excitación. Se produce un defecto cuando el aislamiento eléctrico entre las partes activas de cualquiera de estos devanados y tierra se reduce considerablemente o desaparece. La detección de los defectos a tierra en ambos devanados es un tema ampliamente estudiado a nivel industrial. Tras la detección y confirmación de la existencia del defecto, dicha falta debe ser localizada a lo largo del devanado para su reparación, para lo que habitualmente el rotor debe ser extraído del estator. Esta operación resulta especialmente compleja y cara. Además, el hecho de limitar la corriente de defecto en ambos devanados provoca que el defecto no sea localizable visualmente, pues apenas existe daño en el generador. Por ello, se deben aplicar técnicas muy laboriosas para localizar exactamente el defecto y poder así reparar el devanado. De cara a reducir el tiempo de reparación, y con ello el tiempo en que el generador esta fuera de servicio, cualquier información por parte del relé de protección acerca de la localización del defecto resultaría de gran utilidad. El principal objetivo de esta tesis doctoral ha sido el desarrollo de nuevos algoritmos que permitan la estimación de la localización de los defectos a tierra tanto en el devanado rotórico como estatórico de máquinas síncronas. Respecto al devanado de excitación, se ha presentado un nuevo método de localización de defectos a tierra para generadores con excitación estática. Este método permite incluso distinguir si el defecto se ha producido en el devanado de excitación, o en cualquiera de los componentes del sistema de excitación, esto es, transformador de excitación, conductores de alimentación del rectificador controlado, etc. En caso de defecto a tierra en del devanado rotórico, este método proporciona una estimación de su localización. Sin embargo, para poder obtener la localización del defecto, se precisa conocer el valor de resistencia de defecto. Por ello, en este trabajo se presenta además un nuevo método para la estimación de este parámetro de forma precisa. Finalmente, se presenta un nuevo método de detección de defectos a tierra, basado en el criterio direccional, que complementa el método de localización, permitiendo tener en cuenta la influencia de las capacidades a tierra del sistema. Estas capacidades resultan determinantes a la hora de localizar el defecto de forma adecuada. En relación con el devanado estatórico, en esta tesis doctoral se presenta un nuevo algoritmo de localización de defectos a tierra para generadores que dispongan de la protección de faltas a tierra basada en la inyección de baja frecuencia. Se ha propuesto un método general, que tiene en cuenta todos los parámetros del sistema, así como una versión simplificada del método para generadores con capacidades a tierra muy reducida, que podría resultar de fácil implementación en relés de protección comercial. Los algoritmos y métodos presentados se han validado mediante ensayos experimentales en un generador de laboratorio de 5 kVA, así como en un generador comercial de 106 MVA con resultados satisfactorios y prometedores. ABSTRACT One of the most common faults in synchronous generators is the ground fault in both the stator winding and the excitation winding. In case of fault, the insulation level between the active part of any of these windings and ground lowers considerably, or even disappears. The detection of ground faults in both windings is a very researched topic. The fault current is typically limited intentionally to a reduced level. This allows to detect easily the ground faults, and therefore to avoid damage in the generator. After the detection and confirmation of the existence of a ground fault, it should be located along the winding in order to repair of the machine. Then, the rotor has to be extracted, which is a very complex and expensive operation. Moreover, the fact of limiting the fault current makes that the insulation failure is not visually detectable, because there is no visible damage in the generator. Therefore, some laborious techniques have to apply to locate accurately the fault. In order to reduce the repair time, and therefore the time that the generator is out of service, any information about the approximate location of the fault would be very useful. The main objective of this doctoral thesis has been the development of new algorithms and methods to estimate the location of ground faults in the stator and in the rotor winding of synchronous generators. Regarding the excitation winding, a new location method of ground faults in excitation winding of synchronous machines with static excitation has been presented. This method allows even to detect if the fault is at the excitation winding, or in any other component of the excitation system: controlled rectifier, excitation transformer, etc. In case of ground fault in the rotor winding, this method provides an estimation of the fault location. However, in order to calculate the location, the value of fault resistance is necessary. Therefore, a new fault-resistance estimation algorithm is presented in this text. Finally, a new fault detection algorithm based on directional criterion is described to complement the fault location method. This algorithm takes into account the influence of the capacitance-to-ground of the system, which has a remarkable impact in the accuracy of the fault location. Regarding the stator winding, a new fault-location algorithm has been presented for stator winding of synchronous generators. This algorithm is applicable to generators with ground-fault protection based in low-frequency injection. A general algorithm, which takes every parameter of the system into account, has been presented. Moreover, a simplified version of the algorithm has been proposed for generators with especially low value of capacitance to ground. This simplified algorithm might be easily implementable in protective relays. The proposed methods and algorithms have been tested in a 5 kVA laboratory generator, as well as in a 106 MVA synchronous generator with satisfactory and promising results.