Análisis e implementación de estrategias de rutado dinámico basado en CTP para redes de sensores inalámbricas multi-salto

Una red de sensores inalámbrica es un conjunto de dispositivos electrónicos que se comunican entre sí sin la necesidad de una infraestructura, recogiendo información del entorno en el que han sido desplegados, procesándola y transmitiéndola hasta una estación base mediante saltos sucesivos entre los nodos de la red (multi-salto). Durante las dos últimas décadas, este campo ha sido muy desarrollado en la comunidad científica, debido a las ventajas que ofrece el despliegue de una red inalámbrica en un entorno con el fin de estudiarlo y/o controlarlo. La ausencia de una infraestructura, junto con el reducido tamaño de los nodos, permite este estudio sin que dicho entorno se vea significativamente afectado por factores externos como pueda ser la presencia humana, permitiendo además aumentar el número de nodos que componen la red o cambiar la posición de algunos de ellos sin que sea necesario reconfigurarla manualmente. El principal reto que presentan las redes de sensores inalámbricas es su autonomía. En general, se requiere que un nodo tenga la capacidad de funcionar durante largos períodos de tiempo (varios meses o incluso un año) antes de que su batería se agote. Esto hace de la gestión del consumo energético un aspecto crítico en el diseño de la red y sus nodos. En el presente trabajo se busca optimizar este consumo mediante la gestión del proceso de comunicación y enrutamiento de la red. Con este fin, se implementa el protocolo CTP (Collection Tree Protocol) en la plataforma Cookies desarrollada en el Centro de Electrónica Industrial (CEI) de la UPM. CTP es un protocolo de rutado centrado en los datos, que utiliza una topología en árbol, con el nodo coordinador o estación base como raíz del mismo, para la transmisión de la información desde los sensores hasta la estación base. Además, no utiliza direcciones predeterminadas, dotando a la red de la flexibilidad requerida para hacer frente a inconsistencias y/o variaciones en la densidad y tamaño de la red. La ruta escogida se basa en un gradiente de rutado decreciente, ETX (Expected Transmission Count), que representa la calidad de la conexión entre un nodo y su nodo padre. Este gradiente de enrutamiento se obtiene mediante una conversión directa a partir del LQI (Link Quality Indication) definido por el estándar IEEE 802.15.4. Esta conversión directa supone una aproximación utilizando valores umbral del LQI. Un nodo escogerá el siguiente salto que realizará el paquete a enviar seleccionando de entre sus vecinos a aquél que tenga el menor ETX, evitando de esta forma la aparición de bucles. Otro de los aspectos que supone un gran consumo es el proceso de mantenimiento de la estructura de la red, pues requiere el envío periódico de señales de control o beacons a lo largo de toda la red. El protocolo CTP aprovecha el algoritmo de goteo (Trickle Algorithm), para gestionar el mantenimiento: durante la formación de la red y cuando se detecte alguna inconsistencia, se incrementa la frecuencia de emisión de los beacons, permitiendo así una rápida propagación de las señales de control para crear o reparar las conexiones entre los nodos. En cambio, cuando la topología de la red es estable, esta frecuencia de emisión se reduce significativamente, limitándose a asegurar que la topología se mantiene estable y favoreciendo así el ahorro de energía.

Tumores indutores de osteomalácia: diagnóstico, caracterização tumoral e avaliação evolutiva em longo prazo de nove pacientes

INTRODUÇÃO: Tumores indutores de osteomalácia (TIOs) são raros, geralmente apresentam origem mesenquimal, têm produção excessiva de fosfatoninas sendo a mais comum o FGF23 (Fibroblast Growth Factor 23) que, em níveis elevados, provoca osteomalácia hipofosfatêmica. A cura dos TIOs envolve a remoção completa do tumor, o que torna essencial sua localização. OBJETIVOS: (1) caracterizar nove pacientes com TIO ao diagnóstico e avaliá-los evolutivamente em longo prazo; (2) avaliar a eficácia da cintilografia com Octreotida (Octreoscan®) e a da cintilografia de corpo inteiro com Mibi (MIBI) na detecção dos TIOs. MÉTODOS: O acompanhamento dos pacientes consistiu na avaliação clínica, na avaliação laboratorial com ênfase no metabolismo ósseo e na realização de exames de imagem para caracterização das deformidades esqueléticas. Para a localização dos TIOs, os pacientes foram submetidos a exames de Octreoscan®, MIBI, ressonância magnética (RM) e tomografia computadorizada (TC). RESULTADOS: O período de observação dos pacientes variou de dois a 25 anos. Ao diagnóstico, todos exibiam fraqueza muscular, dores ósseas e fraturas de fragilidade. Em relação à avaliação laboratorial, apresentavam: hipofosfatemia com taxa de reabsorção tubular de fosfato reduzida, fosfatase alcalina aumentada e níveis elevados de FGF23. O Octreoscan® permitiu a identificação dos TIOs nos nove pacientes e o MIBI possibilitou a localização dos TIOs em seis pacientes, sendo que ambos os exames foram concordantes entre si e com os exames topográficos (RM ou TC). Os achados histopatológicos das lesões dos nove pacientes confirmaram tratar-se de oito tumores mesenquimais fosfatúricos (PMTs) benignos e um PMT maligno. Após a primeira intervenção cirúrgica para a remoção dos TIOs, quatro pacientes encontram-se em remissão da doença e cinco evoluíram com persistência tumoral. Dos cinco, quatro foram reoperados e um aguarda nova cirurgia. Dos que foram reoperados, um paciente se mantém em remissão da doença, um foi a óbito por complicações clínicas, uma teve doença metastática e o último apresentou recidiva tumoral três anos após a segunda cirurgia. Deformidades ósseas graves foram observadas nos pacientes cujo diagnóstico e/ou tratamento clínico foram tardios. O tratamento da osteomalácia foi iniciado com fosfato e perdurou até a ressecção tumoral, tendo sido reintroduzido nos casos de persistência/recidiva tumoral. Quatro pacientes que fizerem uso regular desse medicamento por mais de seis anos evoluíram com hiperparatireoidismo terciário (HPT). CONCLUSÕES: O estudo revelou que tanto o Octreoscan® como o MIBI foram capazes de localizar os TIOs. Por isso, incentivamos a realização do MIBI nos locais onde o Octreoscan® não for disponível. Uma equipe experiente é indispensável para o sucesso cirúrgico visto que os tumores, embora benignos, costumam ser infiltrativos. Recomendamos o seguimento por tempo indeterminado em função do risco de recidiva tumoral. Assim como o FGF23, consideramos o fósforo um excelente marcador de remissão, persistência e recidiva dos TIOs. O diagnóstico e o tratamento precoce são fundamentais para a melhora dos sintomas podendo minimizar as deformidades esqueléticas e as sequelas ósseas. O uso prolongado do fosfato no tratamento da osteomalácia hipofosfatêmica foi associado ao desenvolvimento do HPT

Environmental controls on the Emiliania huxleyi calcite mass

Although ocean acidification is expected to impact (bio)calcification by decreasing the seawater carbonate ion concentration, [CO3]2-, there exists evidence of non-uniform response of marine calcifying plankton to low seawater [CO3]2-. This raises questions on the role of environmental factors other than acidification and on the complex physiological responses behind calcification. Here we investigate the synergistic effect of multiple environmental parameters, including temperature, nutrient (nitrate and phosphate) availability, and seawater carbonate chemistry on the coccolith calcite mass of the cosmopolitan coccolithophore Emiliania huxleyi, the most abundant species in the world ocean. We use a suite of surface (late Holocene) sediment samples from the South Atlantic and southwestern Indian Ocean taken from depths lying well above the modern lysocline. The coccolith calcite mass in our results presents a latitudinal distribution pattern that mimics the main oceanographic features, thereby pointing to the potential importance of phosphorus and temperature in determining coccolith mass by affecting primary calcification and possibly driving the E. huxleyi morphotype distribution. This evidence does not necessarily argue against the potentially important role of the rapidly changing seawater carbonate chemistry in the future, when unabated fossil fuel burning will likely perturb ocean chemistry beyond a critical point. Rather our study highlights the importance of evaluating the combined effect of several environmental stressors on calcifying organisms to project their physiological response(s) in a high CO2 world and improve interpretation of paleorecords.

Sveriges national-litteratur, 1500-1900.

"Verket planlagdt af Oscar Levertin, utgifvet af Henrik Schück och Ruben G:son Berg under medverkan af Fr. Böök ..."

Shortcomings of protein removal prior to high performance liquid chromatographic analysis - A case study using method development for BAY 11-7082

During the analytical method development for BAY 11-7082 ((E)-3-[4-methylphenylsulfonyl]-2-propenenitrile), using HPLC-MS-MS and HPLC-UV, we observed that the protein removal process (both ultrafiltration and precipitation method using organic solvents) prior to HPLC brought about a significant reduction in the concentration of this compound. The use of a structurally similar internal standard, BAY 11-7085 ((E)-3-[4-t-butylphenylsulfonyl]-2-propenenitrile), was not effective in compensating for the loss of analyte as the extent of reduction was different to that of the analyte. We present here a systematic investigation of this problem and a new validated method for the determination of BAY 11-7082. (c) 2006 Elsevier B.V. All rights reserved.

Proceedings of the 2005 Australian Software Engineering Conference

Established in 1986, ASWEC is the premier technical meeting for the Australian software engineering community, and attracts a significant number of international participants. The major goal of the conference is to provide a forum for exchanging experience and new research results in software engineering. To increase the industry participation at ASWEC, we organized two separate paper tracks, which we have called Research Papers and Industry Experience Reports. These paper tracks had separate deadlines, separate program committees, separate review procedures, and separate proceedings. The Research Papers appear in these proceedings and the Industry Experience Reports will appear on a CD-Rom that will be distributed at the conference. The Research Papers track for ASWEC 2005 includes submissions from Australia and across the world. This year we received 79 submissions from 13 countries: 48 from Australia, 7 from New Zealand, 11 from Asia, 9 from Europe, and 2 each from North and South America. All papers were fully refereed by three Program Committee members. We accepted 34 papers to be presented at the conference. We are grateful to all authors who contributed to ASWEC.

Implementing an adaptive sending rate by exploiting SNR in relation to throughput over Wireless Mesh Networks

Wireless Mesh Networks (WMNs) have emerged as a key technology for the next generation of wireless networking. Instead ofbeing another type of ad-hoc networking, WMNs diversify the capabilities of ad-hoc networks. There are many kinds of protocols that work over WMNs, such as IEEE 802.11a/b/g, 802.15 and 802.16. To bring about a high throughput under varying conditions, these protocols have to adapt their transmission rate. While transmission rate is a significant part, only a few algorithms such as Auto Rate Fallback (ARF) or Receiver Based Auto Rate (RBAR) have been published. In this paper we will show MAC, packet loss and physical layer conditions play important role for having good channel condition. Also we perform rate adaption along with multiple packet transmission for better throughput. By allowing for dynamically monitored, multiple packet transmission and adaptation to changes in channel quality by adjusting the packet transmission rates according to certain optimization criteria improvements in performance can be obtained. The proposed method is the detection of channel congestion by measuring the fluctuation of signal to the standard deviation of and the detection of packet loss before channel performance diminishes. We will show that the use of such techniques in WMN can significantly improve performance. The effectiveness of the proposed method is presented in an experimental wireless network testbed via packet-level simulation. Our simulation results show that regardless of the channel condition we were to improve the performance in the throughput.

Efficiency improvements to the Groupe Special Mobile (GSM) digital mobile radio system

Groupe Spécial Mobile (GSM) has been developed as the pan-European second generation of digital mobile systems. GSM operates in the 900 MHz frequency band and employs digital technology instead of the analogue technology of its predecessors. Digital technology enables the GSM system to operate in much smaller zones in comparison with the analogue systems. The GSM system will offer greater roaming facilities to its subscribers, extended throughout the countries that have installed the system. The GSM system could be seen as a further enhancement to European integration. GSM has adopted a contention-based protocol for multipoint-to-point transmission. In particular, the slotted-ALOHA medium access protocol is used to coordinate the transmission of the channel request messages between the scattered mobile stations. Collision still happens when more than one mobile station having the same random reference number attempts to transmit on the same time-slot. In this research, a modified version of this protocol has been developed in order to reduce the number of collisions and hence increase the random access channel throughput compared to the existing protocol. The performance evaluation of the protocol has been carried out using simulation methods. Due to the growing demand for mobile radio telephony as well as for data services, optimal usage of the scarce availability radio spectrum is becoming increasingly important. In this research, a protocol has been developed whereby the number of transmitted information packets over the GSM system is increased without any additional increase of the allocated radio spectrum. Simulation results are presented to show the improvements achieved by the proposed protocol. Cellular mobile radio networks commonly respond to an increase in the service demand by using smaller coverage areas. As a result, the volume of the signalling exchanges increases. In this research, a proposal for interconnecting the various entitles of the mobile radio network over the future broadband networks based on the IEEE 802.6 Metropolitan Area Network (MAN) is outlined. Simulation results are presented to show the benefits achieved by interconnecting these entities over the broadband Networks.

H264 data partitioned video streaming

Motivated by the increasing demand and challenges of video streaming in this thesis, we investigate methods by which the quality of the video can be improved. We utilise overlay networks that have been created by implemented relay nodes to produce path diversity, and show through analytical and simulation models for which environments path diversity can improve the packet loss probability. We take the simulation and analytical models further by implementing a real overlay network on top of Planetlab, and show that when the network conditions remain constant the video quality received by the client can be improved. In addition, we show that in the environments where path diversity improves the video quality forward error correction can be used to further enhance the quality. We then investigate the effect of IEEE 802.11e Wireless LAN standard with quality of service enabled on the video quality received by a wireless client. We find that assigning all the video to a single class outperforms a cross class assignment scheme proposed by other researchers. The issue of virtual contention at the access point is also examined. We increase the intelligence of our relay nodes and enable them to cache video, in order to maximise the usefulness of these caches. For this purpose, we introduce a measure, called the PSNR profit, and present an optimal caching method for achieving the maximum PSNR profit at the relay nodes where partitioned video contents are stored and provide an enhanced quality for the client. We also show that the optimised cache the degradation in the video quality received by the client becomes more graceful than the non-optimised system when the network experiences packet loss or is congested.

Adaptive sending rate over wireless mesh networks using SNR

Wireless Mesh Networks (WMNs) have emerged as a key technology for the next generation of wireless networking. Instead of being another type of ad-hoc networking, WMNs diversify the capabilities of ad-hoc networks. Several protocols that work over WMNs include IEEE 802.11a/b/g, 802.15, 802.16 and LTE-Advanced. To bring about a high throughput under varying conditions, these protocols have to adapt their transmission rate. In this paper, we have proposed a scheme to improve channel conditions by performing rate adaptation along with multiple packet transmission using packet loss and physical layer condition. Dynamic monitoring, multiple packet transmission and adaptation to changes in channel quality by adjusting the packet transmission rates according to certain optimization criteria provided greater throughput. The key feature of the proposed method is the combination of the following two factors: 1) detection of intrinsic channel conditions by measuring the fluctuation of noise to signal ratio via the standard deviation, and 2) the detection of packet loss induced through congestion. We have shown that the use of such techniques in a WMN can significantly improve performance in terms of the packet sending rate. The effectiveness of the proposed method was demonstrated in a simulated wireless network testbed via packet-level simulation.

Analyze impact of context information on rate adaptation algorithm in vehicular communication

Nowadays, road safety and traffic congestion are major concerns worldwide. This is why research on vehicular communication is very vital. In static scenarios vehicles behave typically like in an office network where nodes transmit without moving and with no defined position. This paper analyses the impact of context information on existing popular rate adaptation algorithms. Our simulation was done in MATLAB by observing the impact of context information on these algorithms. Simulation was performed for both static and mobile cases.Our simulations are based on IEEE 802.11p wireless standard. For static scenarios vehicles do not move and without defined positions, while for the mobile case, vehicles are mobile with uniformly selected speed and randomized positions. Network performance are analysed using context information. Our results show that in mobility when context information is used, the system performance can be improved for all three rate adaptation algorithms. That can be explained by that with range checking, when many vehicles are out of communication range, less vehicles contend for network resources, thereby increasing the network performances. © 2013 IEEE.

Adaptive sending rate over wireless mesh networks using SNR

Wireless Mesh Networks (WMNs) have emerged as a key technology for the next generation of wireless networking. Instead of being another type of ad-hoc networking, WMNs diversify the capabilities of ad-hoc networks. Several protocols that work over WMNs include IEEE 802.11a/b/g, 802.15, 802.16 and LTE-Advanced. To bring about a high throughput under varying conditions, these protocols have to adapt their transmission rate. This paper proposes a scheme to improve channel conditions by performing rate adaptation along with multiple packet transmission using packet loss and physical layer condition. Dynamic monitoring, multiple packet transmission and adaptation to changes in channel quality by adjusting the packet transmission rates according to certain optimization criteria provided greater throughput. The key feature of the proposed method is the combination of the following two factors: 1) detection of intrinsic channel conditions by measuring the fluctuation of noise to signal ratio via the standard deviation, and 2) the detection of packet loss induced through congestion. The authors show that the use of such techniques in a WMN can significantly improve performance in terms of the packet sending rate. The effectiveness of the proposed method was demonstrated in a simulated wireless network testbed via packet-level simulation.