Plano estratégico “Empowering Lab ESEIG”

Os jovens ao longo do seu percurso escolar têm aspirações e expetativas elevadas quanto ao valor de empregabilidade dos diplomas a que tiveram acesso em todos os graus de ensino. Contudo, no recente contexto de crise económica, essas aspirações e expetativas socialmente nutridas pela escola e pela família têm sido em grande medida frustradas pelas crescentes dificuldades que os jovens portugueses de hoje têm vivido nos seus processos de inserção profissional. A nível individual, um jovem que passe um longo período inativo tem grandes probabilidades de sofrer de baixa autoestima, exclusão social ou de um “wage scar”, isto é, de no futuro ter um rendimento abaixo do rendimento médio de pessoas com formação e experiência equivalentes além de desenvolverem uma atitude passiva e falta de participação social, o que no longo prazo acaba por ter implicações negativas para a sociedade como um todo. Conscientes desta realidade e sabendo que as incubadoras de negócios podem transmitir confiança à comunidade financeira e apoiar as startups, promovendo uma cultura de empreendedorismo e agindo como um catalisador para o desenvolvimento de estruturas de suporte de negócios mais amplas, partimos para o estudo da incubação de negócios com o intuito de traçar um plano estratégico para a Escola Superior de Estudos Industriais e de Gestão (ESEIG) que permitisse desenvolver a cultura empreendedora da sua comunidade e por esta via dar o seu contributo para a resolução da crise económica que o país atravessa. Começamos por fazer um enquadramento teórico da incubação de negócios e rapidamente percebemos que, sendo a ESEIG uma instituição de ensino superior, era importante incluir no estudo os conceitos de empreendedorismo e inovação e perceber ao nível teórico como funciona a relação Universidade-Empresa. De seguida, fomos para o “terreno” e percebemos que a solução para este desafio passaria por capacitar os alunos da ESEIG com as competências empresariais e empreendedoras necessárias para o desenvolvimento de qualquer empreendimento autonomamente. Faltava agora perceber qual a melhor forma de concretizar este ambicioso objetivo. Após um pouco mais de estudo, percebemos que, a paixão está no centro de empreendedorismo juntamente com outras dimensões afetivas e emocionais e pode estimular a criatividade e o reconhecimento de novos padrões de informação fundamental para a descoberta e exploração de oportunidades promissoras. Por sua vez, a alegria local (escolas, cidades, regiões, países) está associada a uma maior atividade empreendedora, o humor e sentimentos positivos, bem como a satisfação de vida geram efeitos benéficos, como melhor desempenho nas tarefas e produtividade, evolução na carreira e sucesso pessoal e maior propensão para assumir riscos. Percebemos então que é necessário desenvolver uma cultura de positividade, pelo que, sugerimos a implementação do novo quadro conceptual PROSPER (Positivity; Relationships; Outcomes; Strengths; Purpose; Engagement; Resilience) que tem o potencial de ser usado como uma ferramenta organizacional para a implementação dos sete principais componentes de bem-estar. Cientes de que o objetivo final é aumentar a intenção empreendedora dos estudantes, bem como o número efetivo de empreendedores, definimos como objetivos, promover o valor do empreendedorismo na criação de oportunidades e no desenvolvimento das competências dos estudantes (Engaging), fornecer aos estudantes oportunidades de aprendizagem empresarial (Empowering) e apoiar os estudantes na criação e no desenvolvimento de negócios (Equipping). Neste sentido, sugerimos diversas ações que materializam estes objetivos. Para finalizar, utilizamos um Lean Canvas com o intuito de concretizar a nossa proposta estratégica para ESEIG, que culmina com a criação do Empowering Lab ESEIG.

Balancing and lot-sizing mixed-model lines in the footwear industry

This report describes the full research proposal for the project \Balancing and lot-sizing mixed-model lines in the footwear industry", to be developed as part of the master program in Engenharia Electrotécnica e de Computadores - Sistemas de Planeamento Industrial of the Instituto Superior de Engenharia do Porto. The Portuguese footwear industry is undergoing a period of great development and innovation. The numbers speak for themselves, Portugal footwear exported 71 million pairs of shoes to over 130 countries in 2012. It is a diverse sector, which covers different categories of women, men and children shoes, each of them with various models. New and technologically advanced mixed-model assembly lines are being projected and installed to replace traditional mass assembly lines. Obviously there is a need to manage them conveniently and to improve their operations. This work focuses on balancing and lot-sizing stitching mixed-model lines in a real world environment. For that purpose it will be fundamental to develop and evaluate adequate effective solution methods. Different objectives may be considered, which are relevant for the companies, such as minimizing the number of workstations, and minimizing the makespan, while taking into account a lot of practical restrictions. The solution approaches will be based on approximate methods, namely by resorting to metaheuristics. To show the impact of having different lots in production the initial maximum amount for each lot is changed and a Tabu Search based procedure is used to improve the solutions. The developed approaches will be evaluated and tested. A special attention will be given to the solution of real applied problems. Future work may include the study of other neighbourhood structures related to Tabu Search and the development of ways to speed up the evaluation of neighbours, as well as improving the balancing solution method.

Evaluation of air lime and clayish earth mortars for earthen wall renders

CIAV2013 – International Conference on Vernacular Architecture, 7º ATP, VerSus, 16-20 october 2013

Robots and humans as co-workers? The human-centred perspective of work with autonomous systems

The design of work organisation systems with automated equipment is facing new challenges and the emergence of new concepts. The social aspects that are related with new concepts on the complex work environments (CWE) are becoming more relevant for that design. The work with autonomous systems implies options in the design of workplaces. Especially that happens in such complex environments. The concepts of “agents”, “co-working” or “human-centred technical systems” reveal new dimensions related to human-computer interaction (HCI). With an increase in the number and complexity of those human-technology interfaces, the capacities of human intervention can become limited, originating further problems. The case of robotics is used to exemplify the issues related with automation in working environments and the emergence of new HCI approaches that would include social implications. We conclude that studies on technology assessment of industrial robotics and autonomous agents on manufacturing environment should also focus on the human involvement strategies in organisations. A needed participatory strategy implies a new approach to workplaces design. This means that the research focus must be on the relation between technology and social dimensions not as separate entities, but integrated in the design of an interaction system.

Oil price shocks and the Portuguese economy since the 1970s

This paper assesses empirically the effect of oil price shocks on Portuguese aggregate economic activity, industrial production and price level. We take the usual multivariate VAR methodology to investigate the magnitude and stability of this relationship. In doing so, we follow the approach presented in the recent literature and adopt different oil price specifications. We conclude that, as for most industrialized countries, the nature of this relationship changed in the mid-1980s. Furthermore, we show that the main Portuguese macroeconomic variables have become progressively less responsive to oil shocks and the adjustment towards equilibrium has become increasingly faster.

Gastric and colorectal cancer mortality in an urban and industrialized area of Brazil

PURPOSE: To study the gastric and colorectal cancer mortalities and their relation to the urban-industrialization in Baixada Santista, located in the southeastern region of Brazil. METHODS: Selected from the registries of the State System of Data Analysis Foundation (SEADE) were 1105 deaths due to gastric cancer (ICD 153--154) and 690 due to colorectal cancer (ICD 151) that occurred from 1980 to 1993 in males, above 10 years of age, residing in Baixada Santista. For each of these types of cancer, the standardized mortality rates, age-adjusted by world population in the 1960s, for 4 industrialized and 4 non-industrialized urban communities in that region were calculated. The ratios among those rates were calculated in order to compare the mortality in the periods 1980--93, 1980--1986, and 1987--1993. RESULTS: Standardized mortality rates for colorectal cancer were significantly higher in industrialized area, with ratios of 1.6 [95% CI 1.22 -- 2.29], 1.6 [95% CI 1.2 -- 2.0], and 1.6 [95% CI 1.3 -- 2.0] in the periods 1980--86, 1987--1993 and 1980--93, respectively. Gastric cancer did not show any statistical difference between the industrialized and non-industrialized areas, but there was a significant decrease in BS from the period 1980--1986 to 1987--1993. CONCLUSIONS: The significant elevation of colorectal cancer mortality in the industrialized area could be related to exposure to numerous carcinogens such as aromatic hydrocarbon, organic-chloride, metals, and industrial-port dust present in the region. Alternatively, the non-significant difference in gastric cancer between industrialized and non-industrialized areas and significant decrease in the last few years could be predominately reflecting the advances in the quality of life in urban areas. These results require further case-control studies that could help with the analysis of the associations among cancer and environmental factors (occupational, urban-industrial, habit, and life condition) and genetic susceptibility.

Breaking the Pattern and Creating New Paths – Feminist Mizrahi Women Artists in Israel

This article addresses the work of Mizrahi women artists, i.e., Israeli-Jewish women of Asian or African ethnic origin, using the artist Vered Nissim as a case study. Nissim seeks to affirm the politics of identity and recognition, as well as feminism in order to create a paradigm shift with regards to the local regime of cultural representations in the Israeli art scene. Endeavouring to find ways of undermining the rigid imbalances between different social groups, she calls for a comprehensive reform of the status quo through artistic activism. Nissim employs a style, content, and medium that disrupts the accepted social order, using humour and irony as unique weapons with which she takes liberties with conventional moral, social, and economic values. Placing issues of race, class and gender at the centre of her work, she seeks to undermine and problematize essentialist attitudes, highlighting the political intersections of different identity categories as the critical analysis of intersectionality unfolds.

Ancient materials and techniques to improve the earthen building durability

A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.

Blast loading of masonry infills: testing and simulation

This work intends to present a newly developed test setup for dynamic out-of-plane loading using underWater Blast Wave Generators (WBWG) as loading source. Underwater blasting operations have been, during the last decades, subject of research and development of maritime blasting operations (including torpedo studies), aquarium tests for the measurement of blasting energy of industrial explosives and confined underwater blast wave generators. WBWG allow a wide range for the produced blast impulse and surface area distribution. It also avoids the generation of high velocity fragments and reduces atmospheric sound wave. A first objective of this work is to study the behavior of masonry infill walls subjected to blast loading. Three different masonry walls are to be studied, namely unreinforced masonry infill walls and two different reinforcement solutions. These solutions have been studied previously for seismic action mitigation. Subsequently, the walls will be simulated using an explicit finite element code for validation and parametric studies. Finally, a tool to help designers to make informed decisions on the use of infills under blast loading will be presented.

Comparing different methods to measure biofilm thickness: the techniques are: optical coherence tomography, confocal laser scanning microscopy and low load compression test

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)

The powerful in vitro bioactivity of Euterpe oleracea Mart. seeds and related phenolic compounds

The Euterpe oleracea Mart. (açaí) is a plant from the Amazon region, classified as "super fruit" because of its various functional properties. However, limited investigation has been performed on açaí by-products, such as seeds. Therefore, the aim of this work was to characterized the phenolic compounds of the aqueous extract of açaí seeds and further evaluate its bioactivity (antioxidant and cytotoxic activities. Only proanthocyanidins were detected, being a B-type (epi)catechin tetramer the most abundant; however, procyanidin trimmers were the most predominant form. Açaí seeds extract revealed a high antioxidant (EC50 ranging from 3.6 to 19.4 μg/mL) and cytotoxic activity, being more effective in the cervical carcinoma cell line (HeLa; GI50 = 18 μg/mL); it did not show toxicity for non-tumor cells. Açaí seeds are considered a waste and could have an added economic benefit, through the extraction of natural antioxidants, particularly proanthocyanidins, that could find applications in food and pharmaceutical industries.

A museologia de espaços industriais: o Museu de Lanifícios da Universidade da Beira Interior

Relatório de estágio de mestrado em Património e Turismo Cultural

Aromatic amines sources, environmental impact and remediation

Aromatic amines are widely used industrial chemicals as their major sources in the environment include several chemical industry sectors such as oil refining, synthetic polymers, dyes, adhesives, rubbers, perfume, pharmaceuticals, pesticides and explosives. They result also from diesel exhaust, combustion of wood chips and rubber and tobacco smoke. Some types of aromatic amines are generated during cooking, special grilled meat and fish, as well. The intensive use and production of these compounds explains its occurrence in the environment such as in air, water and soil, thereby creating a potential for human exposure. Since aromatic amines are potential carcinogenic and toxic agents, they constitute an important class of environmental pollutants of enormous concern, which efficient removal is a crucial task for researchers, so several methods have been investigated and applied. In this chapter the types and general properties of aromatic amine compounds are reviewed. As aromatic amines are continuously entering the environment from various sources and have been designated as high priority pollutants, their presence in the environment must be monitored at concentration levels lower than 30 mg L1, compatible with the limits allowed by the regulations. Consequently, most relevant analytical methods to detect the aromatic amines composition in environmental matrices, and for monitoring their degradation, are essential and will be presented. Those include Spectroscopy, namely UV/visible and Fourier Transform Infrared Spectroscopy (FTIR); Chromatography, in particular Thin Layer (TLC), High Performance Liquid (HPLC) and Gas chromatography (GC); Capillary electrophoresis (CE); Mass spectrometry (MS) and combination of different methods including GC-MS, HPLC-MS and CE-MS. Choosing the best methods depend on their availability, costs, detection limit and sample concentration, which sometimes need to be concentrate or pretreated. However, combined methods may give more complete results based on the complementary information. The environmental impact, toxicity and carcinogenicity of many aromatic amines have been reported and are emphasized in this chapter too. Lately, the conventional aromatic amines degradation and the alternative biodegradation processes are highlighted. Parameters affecting biodegradation, role of different electron acceptors in aerobic and anaerobic biodegradation and kinetics are discussed. Conventional processes including extraction, adsorption onto activated carbon, chemical oxidation, advanced oxidation, electrochemical techniques and irradiation suffer from drawbacks including high costs, formation of hazardous by-products and low efficiency. Biological processes, taking advantage of the naturally processes occurring in environment, have been developed and tested, proved as an economic, energy efficient and environmentally feasible alternative. Aerobic biodegradation is one of the most promising techniques for aromatic amines remediation, but has the drawback of aromatic amines autooxidation once they are exposed to oxygen, instead of their degradation. Higher costs, especially due to power consumption for aeration, can also limit its application. Anaerobic degradation technology is the novel path for treatment of a wide variety of aromatic amines, including industrial wastewater, and will be discussed. However, some are difficult to degrade under anaerobic conditions and, thus, other electron acceptors such as nitrate, iron, sulphate, manganese and carbonate have, alternatively, been tested.

Horário por turnos : análise do seu efeito numa empresa do sector industrial

O presente estudo teve por objetivo analisar os possíveis efeitos do trabalho por turnos, incluindo o turno noturno, a nível da saúde, vida familiar e social, numa empresa do sector da indústria. Foi construído um questionário que abordava questões relativas aos dados sociodemográficos, organização temporal do trabalho, qualidade do sono, exigências da tarefa e envolvimento, saúde, vida familiar e social, e posteriormente foi aplicado a uma amostra de 24 trabalhadores com idades entre os 29 e os 52 anos (41,58±5,79 anos). Os resultados mostram uma tendência para doenças como a obesidade, colesterol elevado e manifestação de sintomas relacionados com problemas digestivos nos trabalhadores que trabalham por turnos à [sic] mais anos. Antes do primeiro turno noturno o tempo de sono é bastante reduzido e fica aquém do tempo que os trabalhadores sentem que necessitam dormir para se sentirem bem. O turno da tarde é o que permite os trabalhadores ficarem com um tempo de sono mais próximo desse “ideal”. Em relação à idade, todos os trabalhadores do grupo etário mais velho manifestam interrupções do sono diurno. Também se verifica um maior descontentamento destes trabalhadores com o tempo livre para realizar atividades que tragam bem-estar. Este estudo contribui para o conhecimento da realidade do trabalho por turnos na indústria e espera-se que desperte a procura de soluções que otimizem a vida destes trabalhadores.

Degradación de efluentes de las industrias del cuero y textil mediante procesos fotocatalíticos heterogéneos empleando la luz solar. Degradation of effluents from the leather and textile industries through heterogeneous photocatalytic processes using sunlight.

El creciente desarrollo de la industria del cuero y textil en nuestro país, y específicamente en la provincia de Córdoba, ha hecho resurgir en los ultimos años una problemática aún no resuelta que es la elevada contaminación de los recursos hídricos. En ambas industrias, la operación de teñido involucra principalmente colorantes de tipo azoico los cuales son "no biodegradables" y se fragmentan liberando aminas aromáticas cancerígenas. Para abordar esta problemática, la fotocatálisis heterogénea aparece como una nueva tecnología que permitiría la completa mineralización de estos colorantes. A través de radiación y un fotocatalizador sólido adecuado se pueden generan radicales libres eficientes para la oxidación de materia orgánica (colorantes) en medio acuoso. En este sentido, se proponen tamices moleculares mesoporosos modificados con metales de transición (MT) como fotocatalizadores potencialmente aptos para la degradación de estos contaminantes. El propósito principal de este proyecto es el diseño, síntesis, caracterización y evaluación de materiales mesoporosos que presenten actividad fotocatalítica ya sea mediante la modificación de su estructura con diversos metales fotosensibles y/o empleándolos como soporte de óxido de titanio. Se pretende evaluar estos materiales en la degradación de colorantes intentando desplazar su fotosensibilidad hacia la radiación visible para desarrollar nuevas tecnologías con menor impacto ambiental y mayor aprovechamiento de la energía solar. Para ello se sintetizarán materiales del tipo MCM-41 modificados con distintos MT tales como Fe, Cr, Co, Ni y Zn mediante incorporación directa del ión metálico o impregnación. Al mismo tiempo, tanto estos últimos materiales como el MCM-41 silíceo serán empleados como soporte de TiO2. Sus propiedades fisicoquímicas se caracterizarán mediante distintas técnicas instrumentales y su actividad fotocatalítica se evaluará en la degradación de colorantes azoicos bajo radiación visible. Se seleccionará el catalizador más eficiente y se estudiarán los diversos factores que afectan el proceso de fotodegradación. Así mismo, el análisis de la concentración del colorante y los productos presentes en el medio en función del tiempo de reacción permitirá inferir sobre la cinética de la decoloración y postular posibles mecanismos de fotodegradación. Con esta propuesta se espera contribuír al desarrollo de un sector industrial importante en nuestra provincia como es el de las industrias del cuero y textil, mediante la generación de nuevas tecnologías que empleen la energía solar para la degradación de sus efluentes (colorantes). En este sentido, se espera desarrollar nuevos materiales optimizados para lograr la mayor eficiencia fotocatalítica. Esto conduciría entonces hacia la remediación de un problema ambiental de alto impacto tanto para nuestra provincia y nuestro país como para la población mundial, como es la contaminación de los recursos hídricos. Finalmente, con este proyecto se contribuirá a la formación de dos doctorandos y un maestrando, cuyos temas de tesis están vinculados con nuestro objeto de estudio. The increasing development of the textile and leather industries in our country, and specifically in Córdoba, has revived an unresolved problem that is the high contamination of water resources. In both industries, the dyeing involves mainly type azoic dyes which are not biodegradable and break releasing carcinogenic aromatic amines. Heterogeneous photocatalysis appears as a new technology that would allow the complete mineralization of these pollutants. Through radiation and a suitable solid it is possible to generate free radicals for efficient oxidation of organic matter (dyes) in aqueous medium. In this respect, mesoporous molecular sieves modified with transition metals are proposed as potential photocatalysts. The main purpose of this project is the synthesis of mesoporous materials having photocatalytic activity for the degradation of dyes. We will try to move their photosensitivity to visible radiation to develop new technologies with lower environmental impact and greater use of solar energy. Materials MCM-41 modified with metals (Fe, Cr, Co, Ni and Zn) will be synthesized by direct incorporation or impregnation. These materials and the siliceous MCM-41 will be then employed as support of TiO2. The materials will be evaluated in the photocatalytic degradation of azoic dyes under visible radiation. The influence of different factors on the photodegradation proccess will be studied. Kinetic studies will be carried out and a possible reaction way will be proposed. Thus, this work will contribute to the advancement of an important industrial sector and the remediation of an environmental problem with high impact for our province and our country. Moreover, this proyect will contribute to the development of two doctoral tesis and one magister tesis which are vinculated with our study subject.