Image quality in CT: From physical measurements to model observers.

Evaluation of image quality (IQ) in Computed Tomography (CT) is important to ensure that diagnostic questions are correctly answered, whilst keeping radiation dose to the patient as low as is reasonably possible. The assessment of individual aspects of IQ is already a key component of routine quality control of medical x-ray devices. These values together with standard dose indicators can be used to give rise to 'figures of merit' (FOM) to characterise the dose efficiency of the CT scanners operating in certain modes. The demand for clinically relevant IQ characterisation has naturally increased with the development of CT technology (detectors efficiency, image reconstruction and processing), resulting in the adaptation and evolution of assessment methods. The purpose of this review is to present the spectrum of various methods that have been used to characterise image quality in CT: from objective measurements of physical parameters to clinically task-based approaches (i.e. model observer (MO) approach) including pure human observer approach. When combined together with a dose indicator, a generalised dose efficiency index can be explored in a framework of system and patient dose optimisation. We will focus on the IQ methodologies that are required for dealing with standard reconstruction, but also for iterative reconstruction algorithms. With this concept the previously used FOM will be presented with a proposal to update them in order to make them relevant and up to date with technological progress. The MO that objectively assesses IQ for clinically relevant tasks represents the most promising method in terms of radiologist sensitivity performance and therefore of most relevance in the clinical environment.

Evolution of mammographic image quality in the state of Rio de Janeiro

Objective:To evaluate the evolution of mammographic image quality in the state of Rio de Janeiro on the basis of parameters measured and analyzed during health surveillance inspections in the period from 2006 to 2011.Materials and Methods:Descriptive study analyzing parameters connected with imaging quality of 52 mammography apparatuses inspected at least twice with a one-year interval.Results:Amongst the 16 analyzed parameters, 7 presented more than 70% of conformity, namely: compression paddle pressure intensity (85.1%), films development (72.7%), film response (72.7%), low contrast fine detail (92.2%), tumor mass visualization (76.5%), absence of image artifacts (94.1%), mammography-specific developers availability (88.2%). On the other hand, relevant parameters were below 50% conformity, namely: monthly image quality control testing (28.8%) and high contrast details with respect to microcalcifications visualization (47.1%).Conclusion:The analysis revealed critical situations in terms of compliance with the health surveillance standards. Priority should be given to those mammography apparatuses that remained non-compliant at the second inspection performed within the one-year interval.

Tilastollinen tutkimus ohjelmiston laatuun vaikuttavista tekijöistä

Tämä työ on tehty osana MASTO-tutkimushanketta, jonka tarkoituksena on kehittää ohjelmistotestauksen adaptiivinen referenssimalli. Työ toteutettiin tilastollisena tutkimuksena käyttäen survey-menetelmää. Tutkimuksessa haastateltiin 31 organisaatioyksikköä eri puolelta suomea, jotka tekevät keskikriittisiä sovelluksia. Tutkimuksen hypoteeseina oli laadun riippuvuus ohjelmistokehitysmenetelmästä, asiakkaan osallistumisesta, standardin toteutumisesta, asiakassuhteesta, liiketoimintasuuntautuneisuudesta, kriittisyydestä, luottamuksesta ja testauksen tasosta. Hypoteeseista etsittiin korrelaatiota laadun kanssa tekemällä korrelaatio ja regressioanalyysi. Lisäksi tutkimuksessa kartoitettiin minkälaisia ohjelmistokehitykseen liittyviä käytäntöjä, menetelmiä ja työkaluja organisaatioyksiköissä käytettiin, ongelmia ja parannusehdotuksia liittyen ohjelmistotestaukseen, merkittävimpiä tapoja asiakkaan vaikuttamiseksi ohjelmiston laatuun sekä suurimpia hyötyjä ja haittoja ohjelmistokehityksen tai testauksen ulkoistamisessa. Tutkimuksessa havaittiin, että laatu korreloi positiivisesti ja tilastollisesti merkitsevästi testauksen tason, standardin toteutumisen, asiakasosallistumisen suunnitteluvaiheessa sekä asiakasosallistumisen ohjaukseen kanssa, luottamuksen ja yhden asiakassuhteeseen liittyvän osakysymyksen kanssa. Regressioanalyysin perusteella muodostettiin regressioyhtälö, jossa laadun todettiin positiivisesti riippuvan standardin toteutumisesta, asiakasosallistumisesta suunnitteluvaiheessa sekä luottamuksesta.

Kalman Filtering in Online Paper Quality Assessment

Controlling the quality variables (such as basis weight, moisture etc.) is a vital part of making top quality paper or board. In this thesis, an advanced data assimilation tool is applied to the quality control system (QCS) of a paper or board machine. The functionality of the QCS is based on quality observations that are measured with a traversing scanner making a zigzag path. The basic idea is the following: The measured quality variable has to be separated into its machine direction (MD) and cross direction (CD) variations due to the fact that the QCS works separately in MD and CD. Traditionally this is done simply by assuming one scan of the zigzag path to be the CD profile and its mean value to be one point of the MD trend. In this thesis, a more advanced method is introduced. The fundamental idea is to use the signals’ frequency components to represent the variation in both CD and MD. To be able to get to the frequency domain, the Fourier transform is utilized. The frequency domain, that is, the Fourier components are then used as a state vector in a Kalman filter. The Kalman filter is a widely used data assimilation tool to combine noisy observations with a model. The observations here refer to the quality measurements and the model to the Fourier frequency components. By implementing the two dimensional Fourier transform into the Kalman filter, we get an advanced tool for the separation of CD and MD components in total variation or, to be more general, for data assimilation. A piece of a paper roll is analyzed and this tool is applied to model the dataset. As a result, it is clear that the Kalman filter algorithm is able to reconstruct the main features of the dataset from a zigzag path. Although the results are made with a very short sample of paper roll, it seems that this method has great potential to be used later on as a part of the quality control system.

Um procedimento simples e barato para a construção de um equipamento "dip-coating" para deposição de filmes em laboratório

In this work we show how to build a piece of equipment for depositing thin films by the dip-coating process, using inexpensive components easily found on the market. This equipment allows us to control the dipping and pulling velocity at which the substrate is put in the film precursor solution, two very important parameters for obtain thin films. This article discusses the construction of the mechanical and electric parts of the equipment, a simple method to interface it to a computer and the development of the software to control the dip-coating parameters.

Predicting overall service quality: a structural equation modelling approach

In this article, the results of a modified SERVQUAL questionnaire (Parasuraman et al., 1991) are reported. The modifications consisted in substituting questionnaire items particularly suited to a specific service (banking) and context (county of Girona, Spain) for the original rather general and abstract items. These modifications led to more interpretable factors which accounted for a higher percentage of item variance. The data were submitted to various structural equation models which made it possible to conclude that the questionnaire contains items with a high measurement quality with respect to five identified dimensions of service quality which differ from those specified by Parasuraman et al. And are specific to the banking service. The two dimensions relating to the behaviour of employees have the greatest predictive power on overall quality and satisfaction ratings, which enables managers to use a low-cost reduced version of the questionnaire to monitor quality on a regular basis. It was also found that satisfaction and overall quality were perfectly correlated thus showing that customers do not perceive these concepts as being distinct

Computer-aided discovery of biological activity spectra for anti-aging and anti-cancer olive oil oleuropeins

Aging is associated with common conditions, including cancer, diabetes, cardiovascular disease, and Alzheimer"s disease. The type of multi‐targeted pharmacological approach necessary to address a complex multifaceted disease such as aging might take advantage of pleiotropic natural polyphenols affecting a wide variety of biological processes. We have recently postulated that the secoiridoids oleuropein aglycone (OA) and decarboxymethyl oleuropein aglycone (DOA), two complex polyphenols present in health‐promoting extra virgin olive oil (EVOO), might constitute a new family of plant‐produced gerosuppressant agents. This paper describes an analysis of the biological activity spectra (BAS) of OA and DOA using PASS (Prediction of Activity Spectra for Substances) software. PASS can predict thousands of biological activities, as the BAS of a compound is an intrinsic property that is largely dependent on the compound"s structure and reflects pharmacological effects, physiological and biochemical mechanisms of action, and specific toxicities. Using Pharmaexpert, a tool that analyzes the PASS‐predicted BAS of substances based on thousands of"mechanism‐ effect" and"effect‐mechanism" relationships, we illuminate hypothesis‐generating pharmacological effects, mechanisms of action, and targets that might underlie the anti‐aging/anti‐cancer activities of the gerosuppressant EVOO oleuropeins.

Nivel de calidad de los medicamentos elaborados por los alumnos en el laboratorio de prácticas y de su control como producto acabado por parte de los mismos alumnos

Una de las prácticas de laboratorio de Tecnología Farmacéutica requiere la elaboración de comprimidos en la asignatura de Farmacia Galénica II siguiendo el mismo flujo de fabricación al empleado en la industria farmacéutica (pesada, tamización, mezclado, amasado, granulación, secado, mezclado y compresión). Estos comprimidos se analizan en la asignatura de Farmacia Galénica III (entre 6 y 12 meses más tarde) por los mismos alumnos según las directrices de la Real Farmacopea Española.En el trabajo se exponen gráficamente los resultados hallados y se comentan los principales puntos de mejora ya que el producto elaborado no es conforme en la mayoría de los casos (sólo alrededor del 50% de los productos elaborados por los alumnos podrían ser conformes, aún siendo un proceso validado). Realmente, la experiencia de los operadores es el punto más crítico que influye en los resultados de estos lotes de comprimidos, sobre todo en el laboratorio analítico. Esta hipótesis ha sido confirmada en lotes analizados por el personal cualificado del departamento de control de calidad del Servei de Desenvolupament del Medicament de la Facultat de Farmàcia de la Universitat de Barcelona, ya que en todos los casos los resultados obtenidos fueron más exactos, repetitivos y cercanos a los teóricos.

INTERACTIONS: DESIGN, IMPLEMENTATION AND EVALUATION OF A COMPUTATIONAL TOOL FOR TEACHING INTERMOLECULAR FORCES IN HIGHER EDUCATION

Intermolecular forces are a useful concept that can explain the attraction between particulate matter as well as numerous phenomena in our lives such as viscosity, solubility, drug interactions, and dyeing of fibers. However, studies show that students have difficulty understanding this important concept, which has led us to develop a free educational software in English and Portuguese. The software can be used interactively by teachers and students, thus facilitating better understanding. Professors and students, both graduate and undergraduate, were questioned about the software quality and its intuitiveness of use, facility of navigation, and pedagogical application using a Likert scale. The results led to the conclusion that the developed computer application can be characterized as an auxiliary tool to assist teachers in their lectures and students in their learning process of intermolecular forces.

Asiakkuuksien johtaminen kuljetusalan pk-yrityksessä

The profitability on transportation field has been low for a long time. The re-cession that started in the fall of 2008 has caused even more trouble to transportation companies as the number of transportations has gone down and the competition has gotten tougher since the time before the recession. Because the low profitability level does not allow competing with prices, transportation companies must come up with other means to differ from their competitors. The main goal of the research was to find out how a small and medium-sized enterprise (SME) on transportation field should manage its customer relationships. Due to limited resources, companies should direct their resources to serving their most valuable customers. Companies should first make a determination of their customer base. This works as a base for establishing customer portfolios, in other words making customer groups based on e.g. profitability, buying volumes and loyalty. Companies can gain competitive advantage also by improving their service quality. Important information regarding the selection criteria of a transporta-tion company, transaction methods, service time and accessibility of person-nel, customers’ expectations on transportation company’s personnel, utiliza-tion of IT-solutions as a part of transportation service, the image of a transportation company and necessity of quality control meetings was gathered for this research by interviewing customers. By utilizing this information, transportation company can adapt its service offering to equal the customer needs and expectations better. A service process example was created to improve the service quality of the transportation company. It shows the whole process from the customer sending the transportation order to the point when the customer receives an invoice from the transportation company. The example process shows the most fragile stages of the service process: the interaction points. An example of this is when the driver and the customer meet at the unloading place. The results show that even a SME can have the opportunity to succeed in competitive markets by managing CRM. Expensive software are usually out of reach of a SME, but having a CRM software does not automatically guar-antee success in customer relationship management. Small and medium-sized firms can commit their current customers and recruit new customers by utilizing customer knowledge, offering top quality service, being innovative and offering functional services.

Simulating the performance of paper machine control

The topic of this thesis is the simulation of a combination of several control and data assimilation methods, meant to be used for controlling the quality of paper in a paper machine. Paper making is a very complex process and the information obtained from the web is sparse. A paper web scanner can only measure a zig zag path on the web. An assimilation method is needed to process estimates for Machine Direction (MD) and Cross Direction (CD) profiles of the web. Quality control is based on these measurements. There is an increasing need for intelligent methods to assist in data assimilation. The target of this thesis is to study how such intelligent assimilation methods are affecting paper web quality. This work is based on a paper web simulator, which has been developed in the TEKES funded MASI NoTes project. The simulator is a valuable tool in comparing different assimilation methods. The thesis contains the comparison of four different assimilation methods. These data assimilation methods are a first order Bayesian model estimator, an ARMA model based on a higher order Bayesian estimator, a Fourier transform based Kalman filter estimator and a simple block estimator. The last one can be considered to be close to current operational methods. From these methods Bayesian, ARMA and Kalman all seem to have advantages over the commercial one. The Kalman and ARMA estimators seems to be best in overall performance.

A proposal for a repertoire of software testing methods

Nowadays software testing and quality assurance have a great value in software development process. Software testing does not mean a concrete discipline, it is the process of validation and verification that starts from the idea of future product and finishes at the end of product’s maintenance. The importance of software testing methods and tools that can be applied on different testing phases is highly stressed in industry. The initial objectives for this thesis were to provide a sufficient literature review on different testing phases and for each of the phases define the method that can be effectively used for improving software’s quality. Software testing phases, chosen for study are: unit testing, integration testing, functional testing, system testing, acceptance testing and usability testing. The research showed that there are many software testing methods that can be applied at different phases and in the most of the cases the choice of the method should be done depending on software type and its specification. In the thesis the problem, concerned to each of the phases was identified; the method that can help in eliminating this problem was suggested and particularly described.

The Productivity, Economy and Quality of Welding in the Different Geographical Areas of China - Today and in the Future

This master’s thesis gives out the real situation of the China welding industry and factories nowadays in different geographical areas, in order to inform the Finnish companies who have the willing to find a Chinese welding subcontractor a proper and correct selection concept by analyzing and supplying the information of different scale and form welding factories in different Chinese areas. The first section of this thesis gives out the general situation about the co-operation between China and Finland in the welding industry, also includes the general introduction of the Chinese welding industry. The second section gives out the geographical compartmentalization result of Chinese welding industry, which is where and how many areas will be studied in this thesis. The main body of this thesis is the real information of welding productivity, welding cost, and welding quality in China. All the information was collected from real factories in China by the author. The last section of this thesis is the improvements to the Chinese welding factories that have the willing to become a subcontractor, and the suggestions to the Finnish companies who may find a Chinese welding factory as their subcontractor in future.

Orthogonal function method in modelling paper web quality variation

This work is devoted to the analysis of signal variation of the Cross-Direction and Machine-Direction measurements from paper web. The data that we possess comes from the real paper machine. Goal of the work is to reconstruct the basis weight structure of the paper and to predict its behaviour to the future. The resulting synthetic data is needed for simulation of paper web. The main idea that we used for describing the basis weight variation in the Cross-Direction is Empirical Orthogonal Functions (EOF) algorithm, which is closely related to Principal Component Analysis (PCA) method. Signal forecasting in time is based on Time-Series analysis. Two principal mathematical procedures that we used in the work are Autoregressive-Moving Average (ARMA) modelling and Ornstein–Uhlenbeck (OU) process.