Capacity-approaching rate function for layered multiantenna architectures

The simultaneous use of multiple transmit and receive antennas can unleash very large capacity increases in rich multipath environments. Although such capacities can be approached by layered multi-antenna architectures with per-antenna rate control, the need for short-term feedback arises as a potential impediment, in particular as the number of antennas—and thus the number of rates to be controlled—increases. What we show, however, is that the need for short-term feedback in fact vanishes as the number of antennas and/or the diversity order increases. Specifically, the rate supported by each transmit antenna becomes deterministic and a sole function of the signal-to-noise, the ratio of transmit and receive antennas, and the decoding order, all of which are either fixed or slowly varying. More generally, we illustrate -through this specific derivation— the relevance of some established random CDMA results to the single-user multi-antenna problem.

On fast-decodable space-time block codes

We focus on full-rate, fast-decodable space–time block codes (STBCs) for 2 x 2 and 4 x 2 multiple-input multiple-output (MIMO) transmission. We first derive conditions and design criteria for reduced-complexity maximum-likelihood (ML) decodable 2 x 2 STBCs, and we apply them to two families of codes that were recently discovered. Next, we derive a novel reduced-complexity 4 x 2 STBC, and show that it outperforms all previously known codes with certain constellations.

On high-rate full-diversity 2x2 space-time codes with low-complexity optimum detection

The 2×2 MIMO profiles included in Mobile WiMAX specifications are Alamouti’s space-time code (STC) fortransmit diversity and spatial multiplexing (SM). The former hasfull diversity and the latter has full rate, but neither of them hasboth of these desired features. An alternative 2×2 STC, which is both full rate and full diversity, is the Golden code. It is the best known 2×2 STC, but it has a high decoding complexity. Recently, the attention was turned to the decoder complexity, this issue wasincluded in the STC design criteria, and different STCs wereproposed. In this paper, we first present a full-rate full-diversity2×2 STC design leading to substantially lower complexity ofthe optimum detector compared to the Golden code with only a slight performance loss. We provide the general optimized form of this STC and show that this scheme achieves the diversitymultiplexing frontier for square QAM signal constellations. Then, we present a variant of the proposed STC, which provides a further decrease in the detection complexity with a rate reduction of 25% and show that this provides an interesting trade-off between the Alamouti scheme and SM.

Low-density parity-check codes for nonergodic block-fading channels

We design powerful low-density parity-check (LDPC) codes with iterative decoding for the block-fading channel. We first study the case of maximum-likelihood decoding, and show that the design criterion is rather straightforward. Since optimal constructions for maximum-likelihood decoding do not performwell under iterative decoding, we introduce a new family of full-diversity LDPC codes that exhibit near-outage-limit performance under iterative decoding for all block-lengths. This family competes favorably with multiplexed parallel turbo codes for nonergodic channels.

Full diversity product codes for block erasure and block fading channels

We show how to build full-diversity product codes under both iterative encoding and decoding over non-ergodic channels, in presence of block erasure and block fading. The concept of a rootcheck or a root subcode is introduced by generalizing the same principle recently invented for low-density parity-check codes. We also describe some channel related graphical properties of the new family of product codes, a familyreferred to as root product codes.

Silver space-time trellis-coded modulation

Silver Code (SilC) was originally discovered in [1–4] for 2×2 multiple-input multiple-output (MIMO) transmission. It has non-vanishing minimum determinant 1/7, slightly lower than Golden code, but is fast-decodable, i.e., it allows reduced-complexity maximum likelihood decoding [5–7]. In this paper, we present a multidimensional trellis-coded modulation scheme for MIMO systems [11] based on set partitioning of the Silver Code, named Silver Space-Time Trellis Coded Modulation (SST-TCM). This lattice set partitioning is designed specifically to increase the minimum determinant. The branches of the outer trellis code are labeled with these partitions. Viterbi algorithm is applied for trellis decoding, while the branch metrics are computed by using a sphere-decoding algorithm. It is shown that the proposed SST-TCM performs very closely to the Golden Space-Time Trellis Coded Modulation (GST-TCM) scheme, yetwith a much reduced decoding complexity thanks to its fast-decoding property.

A total order in [0,1] defined through a 'next' operator

A `next' operator, s, is built on the set R1=(0,1]-{ 1-1/e} defining a partial order that, with the help of the axiom of choice, can be extended to a total order in R1. Besides, the orbits {sn(a)}nare all dense in R1 and are constituted by elements of the samearithmetical character: if a is an algebraic irrational of degreek all the elements in a's orbit are algebraic of degree k; if a istranscendental, all are transcendental. Moreover, the asymptoticdistribution function of the sequence formed by the elements in anyof the half-orbits is a continuous, strictly increasing, singularfunction very similar to the well-known Minkowski's ?(×) function.

Planeamento de Experiências: Modelos e desafios dos Planos em Blocos Incompletos

O principal objetivo de um Planeamento de Experiências reside essencialmente na procura de relações entre variáveis e na comparação de níveis de fatores, recorrendo ao tratamento estatístico dos dados recolhidos. A utilização de blocos no Planeamento de Experiências é fundamental, pois permite reduzir ou eliminar a variabilidade introduzida por fatores que podem influenciar a experiência mas que não interessam e/ou não foram explicitamente incluídos durante o planeamento. Neste trabalho apresentamos os resultados do estudo e investigação dos Planos em Blocos Incompletos Equilibrados (BIBD), Planos em Blocos Incompletos Equilibrados com repetição de blocos (BIBDR) e Planos em Blocos Incompletos com blocos de diferentes dimensões (VBBD). Exploramos algumas propriedades e métodos de construção destes planos e ilustramos, sempre que possível, com exemplos. Tendo como base o planeamento em blocos, apresentamos uma aplicação dos BIBDR na área da Educação com o objetivo de comparar cinco domínios do pensamento algébrico de uma amostra de alunos do 1º ano do ensino superior em Cabo Verde. Para a análise dos dados da amostra foi utilizado o software R, versão 2.12.1. Pudemos constatar que existem diferenças significativas entre alguns dos domínios do pensamento algébrico, nomeadamente entre os domínios da Generalização da Aritmética e Tecnicismo Algébrico com os restantes domínios. Recomendamos a escolha de uma amostra mais representativa constituída por alunos de todas as instituições superiores de Cabo Verde.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos

The main purpose of an Experimental Design resides mainly in the search for relationships between variables and in comparing levels of factors, using statistical treatment of collected data. The use of blocks in Experimental Design is essential because it allows reducing or eliminating the variability introduced by factors that can influence the experience but are not of main interest and/or were not explicitly included during experiments. In this work we present the results of the study and research of Balanced Incomplete Block Designs (BIBD), Balanced Incomplete Block Designs with repeated blocks (BIBDR) and the Incomplete Blocks Designs with blocks with different dimensions (VBBD). We explore some properties and construction methods of such designs and illustrate, when possible, with examples. Based on Block Designs, we present an application of BIBDR in Education, with the aim of comparing five domains of algebraic thinking in a sample of 1st year students of higher education in Cape Verde. For the analysis of sample data, the software R was used, version 2.12.1. We observed that significant differences exist between some of the domains of algebraic thinking, especially among the domains of Generalization of Arithmetic and Algebraic Technicality with the remaining areas. For a more representative sample, we recommend a bigger sample consisting of students from all higher institutions of Cape Verde.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos

The main purpose of an Experimental Design resides mainly in the search for relationships between variables and in comparing levels of factors, using statistical treatment of collected data. The use of blocks in Experimental Design is essential because it allows reducing or eliminating the variability introduced by factors that can influence the experience but are not of main interest and/or were not explicitly included during experiments. In this work we present the results of the study and research of Balanced Incomplete Block Designs (BIBD), Balanced Incomplete Block Designs with repeated blocks (BIBDR) and the Incomplete Blocks Designs with blocks with different dimensions (VBBD). We explore some properties and construction methods of such designs and illustrate, when possible, with examples. Based on Block Designs, we present an application of BIBDR in Education, with the aim of comparing five domains of algebraic thinking in a sample of 1st year students of higher education in Cape Verde. For the analysis of sample data, the software R was used, version 2.12.1. We observed that significant differences exist between some of the domains of algebraic thinking, especially among the domains of Generalization of Arithmetic and Algebraic Technicality with the remaining areas. For a more representative sample, we recommend a bigger sample consisting of students from all higher institutions of Cape Verde.

Fermat's treatise on quadrature: A new reading

The Treatise on Quadrature of Fermat (c. 1659), besides containing the first known proof of the computation of the area under a higher parabola, R x+m/n dx, or under a higher hyperbola, R x-m/n dx with the appropriate limits of integration in each case , has a second part which was not understood by Fermat s contemporaries. This second part of the Treatise is obscure and difficult to read and even the great Huygens described it as'published with many mistakes and it is so obscure (with proofs redolent of error) that I have been unable to make any sense of it'. Far from the confusion that Huygens attributes to it, in this paper we try to prove that Fermat, in writing the Treatise, had a very clear goal in mind and he managed to attain it by means of a simple and original method. Fermat reduced the quadrature of a great number of algebraic curves to the quadrature of known curves: the higher parabolas and hyperbolas of the first part of the paper. Others, he reduced to the quadrature of the circle. We shall see how the clever use of two procedures, quite novel at the time: the change of variables and a particular case of the formulaof integration by parts, provide Fermat with the necessary tools to square very easily curves as well-known as the folium of Descartes, the cissoid of Diocles or the witch of Agnesi.

Planeamento de experiências : modelos e desafios dos planos em blocos incompletos.

O principal objetivo de um Planeamento de Experiências reside essencialmente na procura de relações entre variáveis e na comparação de níveis de fatores, recorrendo ao tratamento estatístico dos dados recolhidos. A utilização de blocos no Planeamento de Experiências é fundamental, pois permite reduzir ou eliminar a variabilidade introduzida por fatores que podem influenciar a experiência mas que não interessam e/ou não foram explicitamente incluídos durante o planeamento. Neste trabalho apresentamos os resultados do estudo e investigação dos Planos em Blocos Incompletos Equilibrados (BIBD), Planos em Blocos Incompletos Equilibrados com repetição de blocos (BIBDR) e Planos em Blocos Incompletos com blocos de diferentes dimensões (VBBD). Exploramos algumas propriedades e métodos de construção destes planos e ilustramos, sempre que possível, com exemplos. Tendo como base o planeamento em blocos, apresentamos uma aplicação dos BIBDR na área da Educação com o objetivo de comparar cinco domínios do pensamento algébrico de uma amostra de alunos do 1º ano do ensino superior em Cabo Verde. Para a análise dos dados da amostra foi utilizado o software R, versão 2.12.1. Pudemos constatar que existem diferenças significativas entre alguns dos domínios do pensamento algébrico, nomeadamente entre os domínios da Generalização da Aritmética e Tecnicismo Algébrico com os restantes domínios. Recomendamos a escolha de uma amostra mais representativa constituída por alunos de todas as instituições superiores de Cabo Verde

CONTEÚDOS PROGRAMÁTICOS CULTURAIS NA TELEVISÃO DE CABO VERDE

Este artigo avalia os produtos audiovisuais produzidos pela Televisão de Cabo Verde (TCV), no quadro da cultura cabo-verdiana enquanto processo de criação e de transformação dos valores culturais, relacionando-os com o factor ideológico- político. Baseando-se na teoria de acção comunicacional de Stuart Hall, explanado no surpreendente artigo Encoding /Decoding, aborda o modo como a cultura e a recorrente ideologia política condiciona a emergência de novos produtos audiovisuais, com discurso «significativo», no referido canal público de televisão.

Teoremas de isomorfía en grupos diedros

En este art\'\ı culo discutimos los resultados principalesalcanzados en mi trabajo de grado, el cual fue dirigido por elprofesor Jairo Charris Casta\~neda. La discusi\'on la limitaremos alos llamados $(p, q)$ grupos, en particular a los grupos diedros.

Unified formalism for non-autonomous mechanical systems

We present a unified geometric framework for describing both the Lagrangian and Hamiltonian formalisms of regular and non-regular time-dependent mechanical systems, which is based on the approach of Skinner and Rusk (1983). The dynamical equations of motion and their compatibility and consistency are carefully studied, making clear that all the characteristics of the Lagrangian and the Hamiltonian formalisms are recovered in this formulation. As an example, it is studied a semidiscretization of the nonlinear wave equation proving the applicability of the proposed formalism.