White mold intensity on common bean in response to plant density, irrigation frequency, grass mulching, Trichoderma spp., and fungicide

The purpose of this study was to evaluate the efficiency of integrated managements on white mold control on common bean. Initially, in vitro testing was made to assess the antagonism of 11 Trichoderma isolates against Sclerotinia sclerotiorum and to investigate fungicides (fluazinam and procymidone) inhibitory effects on those fungi. In two field experiments the following combinations were tested: irrigation frequencies (seven or 14 days), plant densities (six or 12 plants per meter), and three disease controls (untreated control, fungicide or Trichoderma spp.). In a third experiment plant densities were replaced by grass mulching treatments (with or without mulching). Fluazinam was applied at 45 and 55 days after emergence (DAE). The antagonists T. harzianum (experiments 1 and 3) and T. stromatica (experiment 2) were applied through sprinkler irrigation at 10 and 25 DAE, respectively. Most of the Trichoderma spp. were effective against the pathogen in vitro. Fluazinam was more toxic than procymidone to both the pathogen and the antagonist. Fungicide applications increased yield between 32 % and 41 %. In field one application of Trichoderma spp. did not reduce disease intensity and did not increase yield. The reduction from 12 to six plants per meter did not decrease yield, and disease severity diminished in one of the two experiments. It is concluded that of the strategies for white mold control just reduction of plant density and applications of fungicide were efficient.

Chitosan and fungicides on postharvest control of Guignardia citricarpa and on quality of 'Pêra Rio' oranges

Citrus fruits are affected by the black spot disease caused by the fungus Guignardia citricarpa. Chitosan can be used as covering for fruits and may delay the ripening process and inhibit the growth of some fungi. Thus, the control of citrus black spot using chitosan and the fungicides thiabendazole and imazalil was assessed in addition to the physicochemical quality of 'Pêra Rio' oranges. The oranges were immersed into chitosan, thiabendazole or imazalil, and in chitosan mixed with both fungicides. The fruits were then stored at 25 °C, 80% RH, for 7 days and, after this storage period, subjected to physicochemical analyses. Chitosan in association with the fungicides reduced black spot in 'Pêra Rio' oranges and delayed the change in the orange skin colour from green to yellow during the postharvest storage. Total soluble solids, titratable acidity, pH, ascorbic acid content and ratio were not influenced by the treatments. Thus, chitosan applied with the fungicides thiabendazole and imazalil showed potential to control the development of black spot lesions on 'Pêra Rio' oranges during the postharvest period.

Viestintä ravitsemusosaamisen kehittämisessä Case:Sairaalan ateriaprosessi

Tutkielman tarkoituksena oli tutkia viestinnän merkitystä osaamisen kehittämisessä. Tavoitteena oli tutkia, miten viestintä edistää ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksessa etsittiin vastausta kysymyksiin, mitkä ovat ravitsemusosaamisen kehittämisen ja viestinnän tavoitteet, millä työyhteisöviestinnän foorumeilla uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ja millaisia työssä oppimisen prosesseja näillä foorumeilla on tunnistettavissa. Empirian näkökulmasta tutkimusta voidaan kuvata tapaustutkimukseksi. Tapauksena on sairaalan ateriaprosessi. Tutkimuksen valmistelevana aineistona käytettiin uutta ravitsemushoitosuositusta (Nuutinen ym. 2010), jota täydennettiin haastatteluaineistolla. Tutkimuksessa ovat edustettuina hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntemuksen näkökulmat sairaalasta sekä ammatti- ja aikuisopistosta. Tutkimusmenetelmänä käytettiin teemahaastatteluja. Haastattelut nauhoitettiin ja litteroitiin tekstimuotoon. Aineisto analysoitiin teemakortiston ja teemoittelun avulla. Tutkimuksen tulokset osoittavat, että ravitsemusosaamisen kehittämisen tavoitteena on uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttaminen sairaalan ravitsemushoidon prosesseissa ja tuotteissa. Ravitsemusosaamisen kehittämisen tavoitteena on tässä yhteydessä ateriaprosessin ja ruokapalvelun tuotteiden eli ruokavalioiden kehittäminen. Ravitsemushoidon kehittämisen tarkoituksena on asiakkaiden toipumisen, elämänlaadun ja hyvinvoinnin edistäminen sekä terveydenhuollon kustannusten säästäminen. Viestinnällä on tärkeä merkitys ravitsemusosaamisen kehittämisessä. Viestinnän avulla edistetään yksilöllistä ja yhteistä eli tiimioppimista vuorovaikutuksen kautta. Ruokapalvelu- ja hoitohenkilöstön sekä ravitsemushoidon asiantuntijoiden välinen vuoropuhelu nähdään tärkeänä ravitsemusosaamisen kehittämisessä. Vuoropuhelun avulla vahvistetaan ravitsemushoitoon liittyvää tietopohjaa ja yhteistä käsitteistöä. Tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ulkoisissa ja sisäisissä verkostoissa esimerkiksi ravitsemus-yhdyshenkilöverkoston tapaamisissa, moniammatillisissa työryhmissä, henkilöstö- ja oppisopimuskoulutuksissa sekä työfoorumilla eli fyysisessä työtilassa ja hyödyntäen viestintäteknologiaa. Hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntijoilla/opettajilla on tärkeä rooli ravitsemusosaamisen kehittämiseen liittyvässä työssä oppimisen ohjaamisessa. Ravitsemusosaamisen kehittämisessä on tunnistettavissa sosiaalisia, reflektiivisiä, kognitiivisia ja operationaalisia työssä oppimisen prosesseja. Sosiaalisia prosesseja ovat työkokemusten vaihdanta ja reflektiivisiä niiden arviointi. Kognitiivisten prosessien tarkoitus on tiedonhankinta ja prosessointi, jolloin yhdistetään kokemustietoa sekä uutta ravitsemustieteellistä tietoa. Tavoitteena on yhteisen kielen ja toimintamallin luominen, jota kokeillaan käytännössä. Operationaalisia prosesseja ovat fyysisessä työtilassa tapahtuva kokeilemalla, tekemällä ja soveltamalla oppiminen, jolloin uutta toimintamallia esimerkiksi vajaaravitsemuksen seulontaa, ateriatilausta tai reseptiikkaa kokeillaan käytännössä. Johtopäätöksenä voidaan todeta, että sairaalassa on omaksuttu oppivan organisaation periaatteita ravitsemusosaamisen kehittämisessä. Ravitsemusosaamisen kehittäminen on yhteydessä muutokseen, strategiaan, prosessien ja tuotteiden kehittämiseen. Viestinnän avulla edistetään ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttamista sairaalan ateriaprosessissa ja ruokavalioissa. Hoito- ja ruokapalveluhenkilöstön sekä ravitsemushoidon asiantuntijoiden välisen vuoropuhelun tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Tutkimus palvelee ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksen tuloksia on mahdollista käyttää vertailuoppimismateriaalina terveydenhuollon organisaatioissa ja verkostoissa.

On the impact of rigorous approaches on the quality of development

Software systems are expanding and becoming increasingly present in everyday activities. The constantly evolving society demands that they deliver more functionality, are easy to use and work as expected. All these challenges increase the size and complexity of a system. People may not be aware of a presence of a software system, until it malfunctions or even fails to perform. The concept of being able to depend on the software is particularly significant when it comes to the critical systems. At this point quality of a system is regarded as an essential issue, since any deficiencies may lead to considerable money loss or life endangerment. Traditional development methods may not ensure a sufficiently high level of quality. Formal methods, on the other hand, allow us to achieve a high level of rigour and can be applied to develop a complete system or only a critical part of it. Such techniques, applied during system development starting at early design stages, increase the likelihood of obtaining a system that works as required. However, formal methods are sometimes considered difficult to utilise in traditional developments. Therefore, it is important to make them more accessible and reduce the gap between the formal and traditional development methods. This thesis explores the usability of rigorous approaches by giving an insight into formal designs with the use of graphical notation. The understandability of formal modelling is increased due to a compact representation of the development and related design decisions. The central objective of the thesis is to investigate the impact that rigorous approaches have on quality of developments. This means that it is necessary to establish certain techniques for evaluation of rigorous developments. Since we are studying various development settings and methods, specific measurement plans and a set of metrics need to be created for each setting. Our goal is to provide methods for collecting data and record evidence of the applicability of rigorous approaches. This would support the organisations in making decisions about integration of formal methods into their development processes. It is important to control the software development, especially in its initial stages. Therefore, we focus on the specification and modelling phases, as well as related artefacts, e.g. models. These have significant influence on the quality of a final system. Since application of formal methods may increase the complexity of a system, it may impact its maintainability, and thus quality. Our goal is to leverage quality of a system via metrics and measurements, as well as generic refinement patterns, which are applied to a model and a specification. We argue that they can facilitate the process of creating software systems, by e.g. controlling complexity and providing the modelling guidelines. Moreover, we find them as additional mechanisms for quality control and improvement, also for rigorous approaches. The main contribution of this thesis is to provide the metrics and measurements that help in assessing the impact of rigorous approaches on developments. We establish the techniques for the evaluation of certain aspects of quality, which are based on structural, syntactical and process related characteristics of an early-stage development artefacts, i.e. specifications and models. The presented approaches are applied to various case studies. The results of the investigation are juxtaposed with the perception of domain experts. It is our aspiration to promote measurements as an indispensable part of quality control process and a strategy towards the quality improvement.

Measuring Cost of Poor Quality in Industrial Electronics

Quality is not only free but it can be a profit maker. Every dollar that is not spent on doing things wrong becomes a dollar right on the bottom line. The main objective of this thesis is to give an answer on how cost of poor quality can be measured theoretically correctly. Different calculation methods for cost of poor quality are presented and discussed in order to give comprehensive picture about measurement process. The second objective is to utilize the knowledge from the literature review and to apply it when creating a method for measuring cost of poor quality in supplier performance rating. Literature review indicates that P-A-F model together with ABC methodology provides a mean for quality cost calculations. These models give an answer what should be measured and how this measurement should be carried out. However, when product or service quality costs are incurred when quality character derivates from target value, then QLF seems to be most appropriate methodology for quality cost calculation. These methodologies were applied when creating a quality cost calculation method for supplier performance ratings.

System for studies of control strategies applied in the refrigerated chambers

The process of cold storage chambers contributes largely to the quality and longevity of stored products. In recent years, it has been intensified the study of control strategies in order to decrease the temperature change inside the storage chamber and to reduce the electric power consumption. This study has developed a system for data acquisition and process control, in LabVIEW language, to be applied in the cooling system of a refrigerating chamber of 30m³. The use of instrumentation and the application developed fostered the development of scientific experiments, which aimed to study the dynamic behavior of the refrigeration system, compare the performance of control strategies and the heat engine, even due to the controlled temperature, or to the electricity consumption. This system tested the strategies for on-off control, PID and fuzzy. Regarding power consumption, the fuzzy controller showed the best result, saving 10% when compared with other tested strategies.

Obstruction of drippers as a result of application of moisturized whitewash in irrigation water

Plug dynamics of non compensate drip tubes were evaluated, by the precipitation of moisturized whitewash [Ca(OH)2], which is used in the fertigation for the bulb pH control of the trademarks Azud, Amanco, Naandan, Netafim, Petroisa, Queen Gil, with flow rate varying between 0.4 to 3.0 L h-1 usually used in the country. For this matter, increasing doses of Ca(OH)² were applied in the irrigation water, from 0.01 g L-1 to 1.84 g L-1. The flow rate of each drip tube was measured in intervals of time initially of 7 days, later of 15 days of system operation, totaling a time of 100 days of operation, corresponding to nine applications or 432 hours. The coefficient of variation (CV), and relative rate flow (Qr) were evaluated. The results pointed differences among the evaluated emitter regarding the occurrence of the clogging, and the models G2 and G5 presented the smallest levels of flow rate variation comparing to the models G6, G7 and G9.

Effect of trickle irrigation on root development of the wet bulb and 'pera' orange tree yield in the state of São Paulo, Brazil

The aim of this study was to evaluate the effect of different microirrigation designs on root system distribution in wet bulb region, orange orchard yield and quality of orange fruits. The experiment was installed as random blocks with five treatments and four replicates in an orchard of 'Pêra' orange trees grafted on 'Cleopatra' mandarin rootstock. The treatments consisted of: one drip line (T1), two drip lines (T2), four drip lines (T3) per planting row, microsprinkler irrigation (T4) and without irrigation (T5). Irrigation treatments favored yield and ºBrix. The treatment with a single drip line (T1) showed the greatest quantity of roots in relation to the treatments T2 and T3.

Economic viability of retrofiting emitters in center pivot irrigation systems

Although several studies have been conducted to evaluate the uniformity of water application under center pivot irrigation systems, there are few studies concerning the economic perspective of such coefficient. The aim of this study is to present a methodology to accomplish an economic analysis as support for the decision-making to retrofit emitters in center pivot irrigation systems, and to attribute an economic meaning to the uniformity coefficient of water application taking into account the response function productivity to the amount of water applied and the sale price of the crops. In the hypothetic calculation example considering the variation of revenue of potato crop under center pivot irrigation system, it was verified that the area with uniformity coefficient of water application of 90% brought an income increase of BR$ 1,992.00, considering an area about 1,0 ha. Thus, it can be concluded that the methodology presented has met the objectives proposed in the study and made it possible to attribute an economical meaning to the coefficient of water uniformity application.

Influence of different systems of minimum ventilation on air quality in broiler houses

To maintain a competitive development of the Brazilian aviculture, some measures must be taken to enable the identification and reduction of risks to the health of birds, as well as for the physical environment. Therefore, the aim of this study was to evaluate the effectiveness of three different systems of minimum ventilation (positive pressure - SVMP, negative pressure - SVMN and natural ventilation - SVMNat) in the air quality during the first 21 days of life of broiler chicks, during winter. Three points were selected along the length to verify ammonia, carbon monoxide and oxygen concentrations at 3a.m., 9a.m., 3p.m. and 9p.m., by the respiration level of birds and workers. The averages of pollutant gases did not exceed the tolerance levels for the three minimum ventilation systems evaluated, which is 20 and 10ppm for the birds level and 20 and 39ppm for the workers level, for ammonia and carbon monoxide, respectively. It was evident that the minimum ventilation systems were appropriately sized for the required minimum ambient air renovation, in respect to ventilation rates applied for the SVMN and SVMP systems, and with air velocity at levels that do not stress the chicks, including for the SVMNat. The three studied systems of minimum ventilation allowed the birds to externalize their productive performance, with values close to the ones considered satisfactory for all evaluated parameters, in accordance with the Brazilian aviculture standards.

Jatropha seed oil content and yield under different irrigation and potassium fertilization levels

The aim of this research was to evaluate the effects of different irrigation depths and potassium dosages, of Jatropha seed oil content and yield. The experimental design used was randomized blocks, in split-plots, with four replicates. The treatments were four water depths (plots) and four potassium dosages (subplots) applied through irrigation water. The water depths were applied based on the percentage of accumulated evaporation of a Class A (ECA) tank and of rainfall, as following: L0 = without irrigation, L40, L80 and L120, representing 40, 80 and 120% of the balance, respectively. The potassium dosages were K30, K60, K90 and K120 (30, 60, 90 and 120kg ha-1 of potassium, respectively). The oil extraction of samples was done through chemical extraction by organic solvent. The seeds used in this test were from the sampling of two seed productions from 2009, second year of crop production. It was possible to observe that irrigation use increased oil yield and decreased the oil content of Jatropha seed. Potassium fertilization did not influence oil content and yield. There was a relative increase of efficiency in water use producing oil until certain water depth, and after that there was a decrease.

Irrigation management in pruned coffee tree crop

It was evaluated the effect of irrigation management on the production characteristics of coffee cultivar Acaiá MG-1474, planted in spacing of 3.00 m x 0.60 m, pruned in 2004, and irrigated by drip since the planting, in 1997. The experimental designed used was of randomized blocks with five treatments and four replications. The treatments consisted of irrigation management strategies, applying or not applying controlled moisture deficit in layer of 0 to 0.4m, in dry seasons of the year: A = no irrigation (control), B = irrigation during all year considering the factor of water availability in the soil (f) equal to 0.75, C = irrigation during all year considering f = 0.25, D = irrigation during all year, but in January /February /March /July /October /November /December with f = 0.25 and April /May /June /August /September with f = 0.75, E = irrigation only during April /May /June /August /September with f = 0.25. From July /2005 to June /2007 the applied water depth was defined based on Class A pan evaporation (ECA) and the period from July/2007 to June/2008 based on readings of matric potential of soil obtained from Watermark® sensors. Each plot consisted of three rows with ten plants per row, considering as useful plot five plants of center line. The results indicated that the E irrigation management was the most suitable for technical reasons.

Influence of irrigation on wheat crop

The use of irrigation has been increased significantly in wheat crops in Brazil. This study aims to evaluate the effect of irrigation on the productivity, on flour technological quality and on the wheat root system. In a field experiment conducted at IAPAR, in Londrina -state of Paraná (PR), Brazil, the IPR 118 cultivar was grown under sprinkler irrigation (Irrigated Treatment) and without irrigation (Non-irrigated Treatment). The productivity was determined by harvesting three samples of 25 m² per treatment. The same samples were used to evaluate the flour technological quality, considering, among other parameters, gluten strength (W). The evaluation of the root system was performed after the harvest, considering a profile of 0 to 45 cm of soil depth, and sampling eight plants per treatment. The profile wall method was used to determine the roots number (RN) and the monolith method to determine the root dry mass (RDM). Irrigation increased wheat productivity in three times, while W was reduced in the flour. Nevertheless, the value of W found in the Irrigated Treatment (249 10-4 J) was sufficient to keep wheat classification as bread type, the same as IPR 118 cultivar is classified. The measured values of RN and RDM were similar or higher for the Non-irrigated Treatment.

Investment recovery period in electric motor of higher efficiency in pumping for irrigation

In this study, it was adjusted a mathematical model to measure the effect of electric motor efficiency on pumping system costs for irrigation on the tariff structure of conventional electricity and green horo-seasonal , and also to calculate the recovery period of the invested capital in higher efficiency equipment. Then, it was applied to a center pivot irrigation system in two options of electric motor efficiency, 92,6% (standard line) and 94,3% (high efficiency line), and the acquisition cost of the first corresponded to 70% the of the second. The power of the electric motor was 100hp. The results showed that the model allowed us to evaluate if a high efficiency motor was economically viable compared to the standard motor in each tariff structure. The high efficiency motor was not viable in the two tariff structures. In the green horo-seasonal tariff, would only be viable if its efficiency was 4.46% higher than the standard motor. In the conventional tariff, it would only be viable if the efficiency overcame 2.71%.

Water requirement and yield of fig trees under different drip irrigation management

This work aimed to study the effect of drip irrigation management on growth and yield of the 'Roxo de Valinhos' fig tree (Ficus carica L.), at three years old, and to determine crop coefficients (Kc) and its water requirement (ETc) under Baixada Fluminense climate and soil conditions, state of Rio de Janeiro, Brazil. The study was carried out in the experimental area of SIPA (Sistema Integrado de Produção Agroecológica) in Seropédica, Rio de Janeiro State, from July 2011 to May 2012. The experimental area was divided in two blocks, named B1 (sandy clay loam texture) and B2 (loamy sand texture). In each block, irrigation frequencies (IF) of two (T1) and four days (T2) were evaluated, as well as the irrigation absence (T3). Irrigation management and water consumption determination were performed through the soil water balance, using the TDR technique. Plant growth was not affected by IF, differing only in the number of produced internodes. For both soil textures, the mean Kc was 0.60, with a significant difference (p<0.05) only for IF. The estimated mean yield showed no significant differences between both textural classes, ranging from 6,612 kg ha-1 (T3) to 8,554 kg ha-1 (T1). This study indicates the importance of irrigation frequency in the irrigation management of fig trees cultivated in soils with different physical characteristics.