Iowa Division of Vocational Rehabilitation Services Strategic Plan, 2011-2014

Strategic Plan for the Iowa Division of Vocational Rehabilitation Services

Low utilization of health care services following screening for hypertension in Dar es Salaam (Tanzania): a prospective population-based study.

BACKGROUND: Drug therapy in high-risk individuals has been advocated as an important strategy to reduce cardiovascular disease in low income countries. We determined, in a low-income urban population, the proportion of persons who utilized health services after having been diagnosed as hypertensive and advised to seek health care for further hypertension management. METHODS: A population-based survey of 9254 persons aged 25-64 years was conducted in Dar es Salaam. Among the 540 persons with high blood pressure (defined here as BP >or= 160/95 mmHg) at the initial contact, 253 (47%) had high BP on a 4th visit 45 days later. Among them, 208 were untreated and advised to attend health care in a health center of their choice for further management of their hypertension. One year later, 161 were seen again and asked about their use of health services during the interval. RESULTS: Among the 161 hypertensive persons advised to seek health care, 34% reported to have attended a formal health care provider during the 12-month interval (63% public facility; 30% private; 7% both). Antihypertensive treatment was taken by 34% at some point of time (suggesting poor uptake of health services) and 3% at the end of the 12-month follow-up (suggesting poor long-term compliance). Health services utilization tended to be associated with older age, previous history of high BP, being overweight and non-smoking, but not with education or wealth. Lack of symptoms and cost of treatment were the reasons reported most often for not attending health care. CONCLUSION: Low utilization of health services after hypertension screening suggests a small impact of a patient-centered screen-and-treat strategy in this low-income population. These findings emphasize the need to identify and address barriers to health care utilization for non-communicable diseases in this setting and, indirectly, the importance of public health measures for primary prevention of these diseases.

Binary proposal for assessing quality of Open Access Institutional Repositories : the case of Spanish repositories

The reason for this study is to propose a new quantitative approach on how to assess the quality of Open Access University Institutional Repositories. The results of this new approach are tested in the Spanish University Repositories. The assessment method is based in a binary codification of a proposal of features that objectively describes the repositories. The purposes of this method are assessing the quality and an almost automatically system for updating the data of the characteristics. First of all a database was created with the 38 Spanish institutional repositories. The variables of analysis are presented and explained either if they are coming from bibliography or are a set of new variables. Among the characteristics analyzed are the features of the software, the services of the repository, the features of the information system, the Internet visibility and the licenses of use. Results from Spanish universities ARE provided as a practical example of the assessment and for having a picture of the state of the development of the open access movement in Spain.

Methods for the analysis of two dimensional measurement data of paper web

This work is devoted to the problem of reconstructing the basis weight structure at paper web with black{box techniques. The data that is analyzed comes from a real paper machine and is collected by an o®-line scanner. The principal mathematical tool used in this work is Autoregressive Moving Average (ARMA) modelling. When coupled with the Discrete Fourier Transform (DFT), it gives a very flexible and interesting tool for analyzing properties of the paper web. Both ARMA and DFT are independently used to represent the given signal in a simplified version of our algorithm, but the final goal is to combine the two together. Ljung-Box Q-statistic lack-of-fit test combined with the Root Mean Squared Error coefficient gives a tool to separate significant signals from noise.

Developing of Service Platform Thinking in Modern Electricity Distribution Business

Palvelukehitystoiminta sitoo huomattavan määrän resursseja ja on pitkäkestoista toimintaa. Innovatiivisuuteen tähtäämällä ja systemaattisella tuotekehitystyöllä yritys parantaa jatkuvuutta omassa liiketoiminnassaan. Alusta-ajattelu tuo uuden ulottuvuuden tuotteiden ja palveluiden kehitykseen. Alustan kehittäminen tukemaan tuote- ja palvelukehitystoimintaa ja yksinkertaistamaan tuote/palvelurakenteita antaa yrityksissä lisäpotentiaalia esimerkiksi lyhentyneiden kehitysaikojen, paremman kompleksisuuden hallinnan ja kustannustehokkuuden nousun myötä. Toimintojen tehostuminen yritystasolla saa aikaan mahdollisuuksien lisääntymisen nykyisillä liiketoimintasektoreilla. Palvelualustan kehityksellä päästään palvelurakenteen mallintamisen kautta parempaan liiketoiminnan hallitsemiseen ja systemaattisempaan tuotekehityksen läpivientiin. Palvelualustan yhtenä tärkeimpänä hyötynä on, että palvelun rakenteellisuus saadaan kuvattua alustaan. Lisäksi on tärkeää määritellä vastuutukset alustan kehityksessä, sekä pystyä mallintamaan informaation kulku (rajapinnat) prosesseissa.

Market Potential of Service Providers for Niche Vendor

Diplomityössä tarkastellaan palveluoperaattoreiden asemaa Länsi-Euroopan matkapuhelinpalvelumarkkinoilla. Tavoitteena on selvittää, ovatko palveluoperaattorit potentiaalisia asiakkaita tietylle matkapuhelinlisäpalvelujärjestelmien toimittajalle. Lisäksi tavoitteena on rakentaa liiketoimintalaskelmatyökalu, jolla tällaisen järjestelmäinvestoinnin kannattavuus voidaan osoittaa paitsi palveluoperaattorille, myös tämän loppuasiakkaille. Työ aloitetaan matkapuhelinpalvelumarkkinoilla toimivien osapuolten esittelyllä. Eri osapuolten asemaa ja merkitystä matkapuhelinpalvelumarkkinoilla käsitellään. Matkapuhelinpalvelumarkkinoiden kehitystä tarkastellaan uuden teknologian ja erityisesti tulevien palvelujen näkökulmasta. Tarkastelua jatketaan analysoimalla regulaation vaikutusta matkapuhelinpalvelumarkkinoihin. Erityisesti kiinnitetään huomiota regulaation motiiveihin sekä käytännön toteutukseen tietyissä Länsi-Euroopan maissa. Tutkimuksen toteuttamisessa merkittävässä osassa ovat asiantuntijahaastattelut sekä markkina-analyysiraportit.Markkina-analyysissa saatuja tuloksia hyödynnetään liiketoimintalaskelmatyökalun toteutuksessa. Työn tuloksena päädytään myös ratkaisuun palveluoperaattoreiden kiinnostavuudesta asiakassegmenttinä. Tämän lisäksi havaitaan muita potentiaalisia asiakassegmenttejä, joiden tämäntyyppiseen liiketoimintaan soveltuvuutta tutkitaan edelleen.

Object-oriented development of client / server application: case study of service control software

Tässä työssä on esitetty sen ohjelmiston kehittämisen prosessi, joka on tarkoitettu annettavien palveluiden valvottavaksi käyttäen prototyyppimallia. Raportti sisältää vaatimusten, kohteisiin suunnatun analyysin ja suunnittelun, realisointiprosessien kuvauksen ja prototyypin testauksen. Ohjelmiston käyttöala – antavien palveluiden valvonta. Vaatimukset sovellukselle analysoitiin ohjelmistomarkkinoiden perusteella sekä ohjelmiston engineeringin periaatteiden mukaisesti. Ohjelmiston prototyyppi on realisoitu käyttäen asiakas-/palvelinhybridimallia sekä ralaatiokantaa. Kehitetty ohjelmisto on tarkoitettu venäläisille tietokonekerhoille, jotka erikoistuvat pelipalvelinten antamiseen.

Cost Estimation of Engineering Environment Services

Työn tavoitteena oli kehittää tutkittavan insinööriyksikön projektien kustannusestimointiprosessia, siten että yksikön johdolla olisi tulevaisuudessa käytettävänään tarkempaa kustannustietoa. Jotta tämä olisi mahdollista, ensin täytyi selvittää yksikön toimintatavat, projektien kustannusrakenteet sekä kustannusatribuutit. Tämän teki mahdolliseksi projektien kustannushistoriatiedon tutkiminen sekä asiantuntijoiden haastattelu. Työn tuloksena syntyi kohdeyksikön muiden prosessien kanssa yhteensopiva kustannusestimointiprosessi sekä –malli.Kustannusestimointimenetelmän ja –mallin perustana on kustannusatribuutit, jotka määritellään erikseen tutkittavassa ympäristössä. Kustannusatribuutit löydetään historiatietoa tutkimalla, eli analysoimalla jo päättyneitä projekteja, projektien kustannusrakenteita sekä tekijöitä, jotka ovat vaikuttaneet kustannusten syntyyn. Tämän jälkeen kustannusatribuuteille täytyy määritellä painoarvot sekä painoarvojen vaihteluvälit. Estimointimallin tarkuutta voidaan parantaa mallin kalibroinnilla. Olen käyttänyt Goal – Question – Metric (GQM) –menetelmää tutkimuksen kehyksenä.

Prototype of a web-based participative decision support platform in natural hazards and risk management

This paper presents the current state and development of a prototype web-GIS (Geographic Information System) decision support platform intended for application in natural hazards and risk management, mainly for floods and landslides. This web platform uses open-source geospatial software and technologies, particularly the Boundless (formerly OpenGeo) framework and its client side software development kit (SDK). The main purpose of the platform is to assist the experts and stakeholders in the decision-making process for evaluation and selection of different risk management strategies through an interactive participation approach, integrating web-GIS interface with decision support tool based on a compromise programming approach. The access rights and functionality of the platform are varied depending on the roles and responsibilities of stakeholders in managing the risk. The application of the prototype platform is demonstrated based on an example case study site: Malborghetto Valbruna municipality of North-Eastern Italy where flash floods and landslides are frequent with major events having occurred in 2003. The preliminary feedback collected from the stakeholders in the region is discussed to understand the perspectives of stakeholders on the proposed prototype platform.

Profitability Analysis of Service Contracts of Devices

The objective of this study has been to make a profitability analysis of service contracts for a company in Finland. The purpose has been to see how profitable the contracts are and if there possibly were some things to change or develop in the contracts. Allocation rules of cost accounting, service costs both profitability and management of services have been considered in the theory part. All the service contracts that have been valid at least three last accounting periods have been included in the study. All direct costs relating to the contracts have been collected and indirect costs have been assigned to the contracts. Profitability of the contracts has been calculated over three years. Results have been analyzed according to the key figures the company is controlling. Some suggestions for developments have been given at the end of the study. The study has shown differences between the contracts. Part of them has turned out to be like the profitability aims of the company and part less profitable. The study has shown that many factors have an effect on the profitability of the service contracts.

The materiality of the immaterial. Services sectors and CO2 emissions in Uruguay

This paper analyzes the carbon dioxide emissions of the services sectors subsystem of Uruguay in 2004. Services, with the exception of transport, are often considered intangible because of their low level of direct emissions. However, the provision of services requires inputs produced by other sectors, including several highly materialintensive sectors. Through input–output analysis we investigate the relationship between the services subsystem and the rest of the economy as regards carbon dioxide emissions. This approach allows us to study the importance of the set of services branches as a unit in the economic structure as well as to analyze in detail the relationship between the branches. The results depict that services’ direct emissions are the main component, as a consequence of transport-related sectors. However, the pollution that the services subsystem makes the rest of the economy produce is very significant, and it is almost all explained by non-transport-related sectors. This analysis is useful for determining the sectors in which mitigation policies are more effective, and whether they would be better tackled through technical improvements and better practices or through demand policies.

Usability Centered Implementation of a Web Based Value Added Module

Customer specific functionalities are a challenging part of procurement and invoice automation environments. In Basware Enterprise Purchase to Payment product family the customer specific reports are supported only in a basic level without any seamless interface between all EPP products. Also other customer specific functionalities are not supported as there is no customizable interface between the applications and only the most common features are implemented to the products themselves. In this thesis foundations are created for a new web based value added module where it is possible to create seamless customer specific functionalities throughout the whole EPP product family. The work is implemented in a Proof of Concept type of piloting. The system is created in user centered way where the users are able to explain their requests and determine their needs. The result is an excellent foundation for a module that can be developed further.

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.

Success of service-intensive manufacturing firms - resource-based view

The main objective of this study is to examine the relationships between resources, competitive advantage and firm success. The study focuses, on one hand, on the financial performance of service-intensive manufac-turing firms against competitors with a lower service intensity and, on the other hand, on the resources as drivers for competitive advantage and success. The purpose of the theoretical part is to link the study in the field of the strategy research. The empirical part of the study is based on the quantitative analyses of the survey data collected from 50 major suppliers of industrial machinery and transportation equipment in Europe and North America. Results indicate that service-intensive manufacturing firms have performed better and their performance has been more stable vis-à-vis their peers. The main resources that differentiate service-intensive manufacturing firms from their non-service intensive competitors are service strategy and service-oriented top management. The analyses on the VRIO resources produced only a limited amount of information and solely service-centred culture appeared to be a rent generating resource.