Governmental Measures to Enhance the Finnish Innovation System to Respond to the Challenge of Mitigating Climate Change

Climate innovations, that cover both technological applications and process and service innovations, play a key role in climate change mitigation. The purpose of this study was to examine how the Finnish innovation system could be enhanced with governmental measures so that the diffusion of climate innovations could be speeded up. During the study, it became evident that the governmental measures need to support the whole innovation chain, which comprises of research, development, demonstration and deployment. Only this can lead to the successful birth and diffusion of low carbon innovations. The study found that the strengths of the Finnish innovation system are research and development, and the current national innovation policies strongly support these activities. However, these have been emphasised at the expense of the demonstration and deployment. Consequently, the biggest bottlenecks in the Finnish innovation landscape are the lack of pilot and demonstration projects and slow commercialisation, thus the high price of the innovation. To meet with the challenge, the government should firstly promote strict greenhouse gas emission reduction targets. This would boost up the innovation activities, which would also lower the prices of the innovations. To speed up the commercialisation process, measures that stimulate the domestic market, such as feed-in-tariffs and public procurements, are needed. Special attention should also be paid to the measures that could shift the traditional closed innovation chain towards open innovation. This means that the product development should involve experts from several fields such as the user and marketing experts to speed up the commercialisation. In addition, efficient innovation co-operation between both private and public sector is essential. Finally, as the domestic resources are not adequate for producing all the innovations needed, the domestic innovation activities should be focused on a few sectors, and at the same time promote efficient import policies.

Las habilidades motrices básicas en educación primaria: aspectos de su desarrollo = Key motor skills in primary education: developmental aspects

The physical education curriculum stresses the importance of improving students’ key motor skills. This idea agrees with the contributions of research into motor development concerning the important role these skills play in child development. In order to facilitate this improvement is essential to know the different basic aspects of how these key motor skills evolve as well as the essential factors related to the characteristics and conditions of educational practice

Tutkimus- ja kehitysvaiheen toteuttaminen teknologisessa innovaatioprosessissa

Through the ages technological changes have created new challenges and possibilities to develop products, services, processes or organizations. Management of the technology concerns all of those activities from technical invention to commercial application. Management of the technologic innovation process is the more challenging the more technology is involved in a process. Researches of the technological innovations are seldom concern the implementation of early phases and especially in product manufacturing company. Still there are research and development activities. Therefore the purpose of this research is to develop the pattern for implementation of research and development phases in technological innovation process. This study focuses the main elements of the technological innovation management and main obstacles and drivers. This study also focuses decision making and the other influencing elements of the decision making. The research design of this explorative research applies a qualitative research strategy where a case study method is utilized to collect and analyze the data. The study consisted of a single case to utilize of technological ideas and possibilities. The selected case company was the product manufacturing company which didn’t have own technological research and development organization. The case was a process which was analyzed from two different perspectives. The main unit of analysis was the whole process. The data collecting method of this study included semi-structured and open interviews, participant-observations and experimental tests. Analyzing the case data relies on the theoretical propositions of the framework based on the previous research. Based on this research the key elements of the research and development phases in technological innovation process were technical expertise and preliminary investigation. The obstacles and drivers in the R&D phases by the case were management of the whole process and resources and knowing objectives of process and learning during the process. In addition to the result of the research was the feature of decision making to optimize used time. The findings of this study gave further insight implementation of the technological innovation in the product manufacturing company. The research was based a single case which means the results cannot be generalized to different companies or industry fields. Therefore the results generalizing require further research with multiple researchers.

Measuring Brand Equity and Analyzing Its Relationship with Key Marketing Mix Elements

The aim of this paper is to analyze the effect of price and advertising on brand equity. The dimensionality of brand equity is thoroughly examined, and the effect price, price deals, perceived advertising spending and advertising appeal have on the dimensions of brand equity are analyzed using multiple regression analysis as well as other supporting analyses. Price and advertising are found to be of great importance to brand equity. Arguably the most influential finding is the strong positive effect low prices – an integral brand element – have on the case company brand equity, even though a negative effect was hypothesized based on prior research. The results also support separating advertising appeal from perceived advertising spending, as well as linking service quality as part of the overall perceived quality in the context of service-intensive firms.

Customer knowledge processing in key account management

The ability of the supplier firm to generate and utilise customer-specific knowledge has attracted increasing attention in the academic literature during the last decade. It has been argued the customer knowledge should treated as a strategic asset the same as any other intangible assets. Yet, at the same time it has been shown that the management of customer-specific knowledge is challenging in practice, and that many firms are better at acquiring customer knowledge than at making use of it. This study examines customer knowledge processing in the context of key account management in large industrial firms. This focus was chosen because key accounts are demanding and complex. It is not unusual for a single key account relationship to constitute a complex web of relationships between the supplier and the key account – thus easily leading to the dispersion of customer-specific knowledge in the supplier firm. Although the importance of customer-specific knowledge generation has been widely acknowledged in the literature, surprisingly little attention has been paid to the processes through which firms generate, disseminate and use such knowledge internally for enhancing the relationships with their major, strategically important key account customers. This thesis consists of two parts. The first part comprises a theoretical overview and draws together the main findings of the study, whereas the second part consists of five complementary empirical research papers based on survey data gathered from large industrial firms in Finland. The findings suggest that the management of customer knowledge generated about and form key accounts is a three-dimensional process consisting of acquisition, dissemination and utilization. It could be concluded from the results that customer-specific knowledge is a strategic asset because the supplier’s customer knowledge processing activities have a positive effect on supplier’s key account performance. Moreover, in examining the determinants of each phase separately the study identifies a number of intra-organisational factors that facilitate the process in supplier firms. The main contribution of the thesis lies in linking the concept of customer knowledge processing to the previous literature on key account management. Moreover, given than this literature is mainly conceptual or case-based, a further contribution is to examine its consequences and determinants based on quantitative empirical data.

Tutkimus- ja kehitysvaiheen toteuttaminen teknologisessa innovaatioprosessissa

Teknologiset muutokset ovat kautta aikojen luoneet uusia haasteita ja mahdollisuuksia tuotteiden, palveluiden, prosessien tai organisaatioiden kehittämiseen. Teknologian johtaminen tarkoittaa kaikki niitä toimia, joiden avulla teknologisesta keksinnöstä saadaan kaupallinen sovellus. Teknologisen innovaatioprosessin johtaminen on, sitä haasteellisempaa, mitä enemmän siinä on mukana teknologiaa. Harvoin teknologisten innovaatioiden tutkimukset ovat kohdistuneet prosessin varhaisen vaiheen toteutukseen ja erityisesti tuotannolliseen toimintaan keskittyvissä yrityksissä, vaikka kaikissa tuotteita valmistavissa teollisuuksissa tapahtuu tutkimus- ja kehitystyötä. Siksi tämän tutkimuksen tavoitteena on kehittää toimintamalli teknologisen innovaatioprosessin tutkimus- ja kehitysvaiheen toteuttamiselle. Tutkimus keskittyy teknologisen innovaatioprosessin tärkeimpiin elementteihin johtamisen ja prosessin kannalta sekä sen estäviin ja edistäviin tekijöihin. Tutkimuksessa tarkastellaan myös päätöksentekoa ja siihen vaikuttavia tekijöitä. Tutkimus oli kartoittava ja sillä oli laadullinen tutkimusstrategia. Tarkempi tutkimusmenetelmä kerätä ja analysoida tutkimustietoa oli tapaustutkimus. Tämä tutkimus perustui yhteen tapaukseen teknologisten ideoiden ja mahdollisuuksien hyödyntämisestä. Valittu tapausyritys oli tuotteita valmistava yritys, jolla ei ollut varsinaista tutkimus- ja kehitysorganisaatiota teknologian kehittämistä varten. Itse tapaus oli prosessi, jota analysoitiin kahdesta eri näkökulmasta, mutta primääri analysointiyksikkö oli koko prosessi. Aineiston hankintamenetelmät olivat puolistrukturoidut ja avoimet haastattelut, osallistuva havainnointi ja kokeelliset tutkimukset. Aineiston analysointi perustui aikaisemmin tutkimuksen yhteydessä rakennettuun teoreettiseen viitekehykseen. Teknologisen innovaatioprosessin tutkimus- ja kehitysvaiheen tärkeimmät elementit tutkimuksen mukaan olivat oman teknologian asiantuntemus ja esitutkimusvaihe. Tekijät, jotka tutkimuksen mukaan estivät ja edistivät T&K -vaiheen onnistumista, olivat koko prosessin ja resurssien johtaminen sekä tietoisuus prosessin tavoitteista ja prosessin aikainen oppiminen. Tutkimuksessa löydettiin myös päätöksentekoon liittyvä ominaisuus optimoida siihen käytettävää aikaa. Tutkimuksen tulokset lisäsivät näkemystä teknologisten innovaatioiden toteuttamisesta tuotteita valmistavassa yrityksessä. Tutkimus perustui yhteen tapaukseen, minkä vuoksi tulokset eivät ole yleistettävissä muihin yrityksiin tai toimialoihin. Tulosten yleistämistä varten tutkimuksia tulisi suorittaa lisää ja käyttää useita tutkijoita.

The relationship between first-order capabilities and online innovations. A comparative case study on the publishing sector.

The objective of this thesis was to study the relationship between firstorder capabilities and online innovations. First-order capabilities can be divided into market and technology capabilities, and they play an important role in the production of innovations. The study was carried out in publishing industry, where many changes have taken place in the online environment during the last few years. In the empirical research, four companies were studied, two magazine publishers and two newspaper publishers. The analysis was done in two phases; first every case was analyzed alone and then the cases were compared in cross-case analysis. The most important finding was the positive impact of market capability to the production of online innovations. The study also increased understanding about the relationship between market and technology capabilities and online innovations in general.

Key performance indicators for supplier and assortement evaluation

Tutkimuksen tavoite oli selvittää suorituskyvyn mittaamista, mittareita ja niiden suunnittelua tukku- ja jakeluliiketoiminnassa. Kriittisten menestystekijöiden mittarit auttavat yritystä kohti yhteistä päämäärää. Kriittisten menestystekijöiden mittarit ovat usein yhdistetty strategiseen suunnitteluun ja implementointiin ja niillä on yhtäläisyyksiä monien strategisten työkalujen kun Balanced scorecardin kanssa. Tutkimus ongelma voidaan esittää kysymyksen muodossa. •Mitkä ovat Oriola KD:n pitkänaikavälin tavoitteita tukevat kriittisten menestystekijöiden mittarit (KPIs) toimittajan ja tuotevalikoiman mittaamisessa? Tutkimus on jaettu kirjalliseen ja empiiriseen osaan. Kirjallisuus katsaus käsittelee aikaisempaa tutkimusta strategian, toimitusketjun hallinnan, toimittajan arvioinnin ja erilaisten suorituskyvyn mittaamisjärjestelmien osalta. Empiirinen osuus etenee nykytila-analyysista ehdotettuihin kriittisten menestystekijöiden mittareihin, jotka ovat kehitetty kirjallisuudesta löydetyn mallin avulla. Tutkimuksen lopputuloksena ovat case yrityksen tarpeisiin kehitetyt kriittisten menestystekijöiden mittarit toimittajan ja tuotevalikoiman arvioinnissa.

Innovatiivisuus ja yhteistoiminnallinen oppiminen liike-elämässä ja opetuksessa

Innovativity and cooperative learning in business life and teaching The study comprises four articles and a summary, which analyse the concepts of innovation and innovativity and the cooperative learning connected to the innovation processes of companies. Th e study comments on what is innovativity. Another point of inspection is how the cooperative learning theory constructed on the basis of educational science lends it self to inspecting business innovations. At the end, we ponder upon how the concepts of innovativity can be used to inspect teachers’ activities. The studied business innovations were chosen on after considering expert statements. The key personnel in the innovation process were interviewed. The concept of innovation is inspected especially with the aid of concept analysis. The pedagogical innovativity study based on the view of education specialists in quantitative and the data was collected with a questionnaire created on the basis of previous research and literature. Different research methods were used in the studies, thus mixed methods were used for the whole of the doctoral thesis. The starting point for the whole, grounded theory, has to be understood here as a research strategy as well as a research method and data analysis method. The results show that innovativity is creativity that demands versatile learning and has positive eff ects on the process or event in practice. The results also show that in successful innovation businesses cooperative learning is something that has been found instead of searched. Cooperative learning can be seen as characteristic for innovation businesses. The five stage division of cooperative learning creates a useful method of analysing learning in innovation businesses. Innovativity connected to cooperative learning seems to make the creation of innovations possible. In addition to this, the results also show that a teacher’s innovativity is connected to reforms and an attitude that embraces them. Versatile learning in the individual and community is a prerequisite for innovativity. It is important that the teacher has a continuous will to renew teaching methods and combine work and teaching methods. The basic requirements are pedagogical vocational profi ciency and resourcefulness in everyday work.

Promoting Programming Learning. Engagement, Automatic Assessment with Immediate Feedback in Visualizations

The skill of programming is a key asset for every computer science student. Many studies have shown that this is a hard skill to learn and the outcomes of programming courses have often been substandard. Thus, a range of methods and tools have been developed to assist students’ learning processes. One of the biggest fields in computer science education is the use of visualizations as a learning aid and many visualization based tools have been developed to aid the learning process during last few decades. Studies conducted in this thesis focus on two different visualizationbased tools TRAKLA2 and ViLLE. This thesis includes results from multiple empirical studies about what kind of effects the introduction and usage of these tools have on students’ opinions and performance, and what kind of implications there are from a teacher’s point of view. The results from studies in this thesis show that students preferred to do web-based exercises, and felt that those exercises contributed to their learning. The usage of the tool motivated students to work harder during their course, which was shown in overall course performance and drop-out statistics. We have also shown that visualization-based tools can be used to enhance the learning process, and one of the key factors is the higher and active level of engagement (see. Engagement Taxonomy by Naps et al., 2002). The automatic grading accompanied with immediate feedback helps students to overcome obstacles during the learning process, and to grasp the key element in the learning task. These kinds of tools can help us to cope with the fact that many programming courses are overcrowded with limited teaching resources. These tools allows us to tackle this problem by utilizing automatic assessment in exercises that are most suitable to be done in the web (like tracing and simulation) since its supports students’ independent learning regardless of time and place. In summary, we can use our course’s resources more efficiently to increase the quality of the learning experience of the students and the teaching experience of the teacher, and even increase performance of the students. There are also methodological results from this thesis which contribute to developing insight into the conduct of empirical evaluations of new tools or techniques. When we evaluate a new tool, especially one accompanied with visualization, we need to give a proper introduction to it and to the graphical notation used by tool. The standard procedure should also include capturing the screen with audio to confirm that the participants of the experiment are doing what they are supposed to do. By taken such measures in the study of the learning impact of visualization support for learning, we can avoid drawing false conclusion from our experiments. As computer science educators, we face two important challenges. Firstly, we need to start to deliver the message in our own institution and all over the world about the new – scientifically proven – innovations in teaching like TRAKLA2 and ViLLE. Secondly, we have the relevant experience of conducting teaching related experiment, and thus we can support our colleagues to learn essential know-how of the research based improvement of their teaching. This change can transform academic teaching into publications and by utilizing this approach we can significantly increase the adoption of the new tools and techniques, and overall increase the knowledge of best-practices. In future, we need to combine our forces and tackle these universal and common problems together by creating multi-national and multiinstitutional research projects. We need to create a community and a platform in which we can share these best practices and at the same time conduct multi-national research projects easily.

Innovations of ageing and societal transition : Dynamics of change of the socio-technical regime of ageing

The purpose of this dissertation is to examine the dynamics of the socio-technical system in the field of ageing. The study stems from the notion that the ageing of the population as a powerful megatrend has wide societal effects, and is not just a matter for the social and health sector. The central topic in the study is change: not only the age structures and structures of society are changing, but also at the same time there is constant development, for instance, in technologies, infrastructures and cultural perceptions. The changing concept of innovation has widened the understanding of innovations related to ageing from medical and assistive technological innovations to service and social innovations, as well as systemic innovations at different levels, which means the intertwined and co-evolutionary change in technologies, structures, services and thinking models. By the same token, the perceptions of older people and old age are becoming more multi-faceted: old age is no longer equated to illnesses and decline, but visions of active ageing and a third age have emerged, which are framed by choices, opportunities, resources and consumption in later life. The research task in this study is to open up the processes and mechanisms of change in the field of ageing, which are studied as a complex, multi-level and interrelated socio-technical system. The question is about co-effective elements consisting of macro-level landscape changes, the existing socio-technical regime (the rule system, practices and structures) and bottom-up niche-innovations. Societal transitions do not account for the things inside the regime alone, or for the long-term changes in the landscape, nor for the radical innovations, but for the interplay between all these levels. The research problem is studied through five research articles, which offer micro-level case studies to macro-level phenomenon. Each of the articles focus on different aspects related to ageing and change, and utilise various datasets. The framework of this study leans on the studies of socio-technical systems and multi-level perspective on transitions mainly developed by Frank Geels. Essential factors in transition from one socio-technological regime to another are the co-evolutionary processes between landscape changes, regime level and experimental niches. Landscape level changes, like the ageing of the population, destabilise the regime in the forms of coming pressures. This destabilization offers windows for opportunity to niche-innovations outside or at fringe of the regime, which, through their breakthrough, accelerate the transition process. However, the change is not easy because of various kinds of lock-ins and inertia, which tend to maintain the stability of the regime. In this dissertation, a constructionist approach of society is applied leaning mainly to the ideas of Anthony Giddens’ theory of structuration, with the dual nature of structures. The change is taking place in the interplay between actors and structures: structures shape people’s practices, but at the same time these practices constitute and reproduce social systems. Technology and other material aspects, as part of socio-technical systems, and the use of them, also take part in the structuration process. The findings of the study point out that co-evolutionary and co-effective relationships between economic, cultural, technological and institutional fields, as well as relationships between landscape changes, changes in the local and regime-level practices and rule systems, are a very complex and multi-level dynamic socio-technical phenomenon. At the landscape level of ageing, which creates the pressures and triggers to the regime change, there are three remarkable megatrends: demographic change, changes in the global economy and the development of technologies. These exert pressures to the socio-technical regime, which as a rule system is experiencing changes in the form of new markets and consumer habits, new ways of perceiving ageing, new models of organising the health care and other services and as new ways of considering innovation and innovativeness. There are also inner dynamics in the relationships between these aspects within the regime. These are interrelated and coconstructed: the prevailing perceptions of ageing and innovation, for instance, reflect the ageing policies, innovation policies, societal structures, organising models, technology and scientific discussion, and vice versa. Technology is part of the inner dynamics of the sociotechnological regime. Physical properties of the artefacts set limitations and opportunities with regard to their functions and uses. The use of and discussion about technology, contributes producing and reproducing the perceptions of old age. For societal transition, micro-level changes are also needed, in form of niche-innovations, for instance new services, organisational models or new technologies, Regimes, as stabilitystriven systems, tend to generate incremental innovations, but radically new innovations are generated in experimental niches protected from ‘normal’ market selection. The windows of opportunity for radical novelties may be opened if the circumstances are favourable for instance by tensions in the socio-technical regime affected by landscape level changes. This dissertation indicates that a change is taking place, firstly, in the dynamic interactionbetween levels, as a result of purposive action and governance to some extent. Breaking the inertia and using the window of opportunity for change and innovation offered by dynamics between levels, presupposes the actors’ special capabilities and actions such as dynamic capabilities and distance management. Secondly, the change is taking place the socio-technological negotiations inside the regime: interaction between technological and social, which is embodied in the use of technology. The use of technology includes small-level contextual scripts that also participate in forming broader societal scripts (for instance defining old age at the society level), which in their turn affect the formation of policies for innovation and ageing. Thirdly, the change is taking place by the means of active formation of the multi-actor innovation networks, where the role of distance management is crucial to facilitate the communication between actors coming from different backgrounds as well as to help the niches born outside the regime to utilise the window of opportunity offered by regime destabilisation. This dissertation has both theoretical and practical contributions. This study participates in the discussion of action-oriented view on transition by opening up of the socio-technological, coevolutionary processes of the multi-faceted phenomenon of ageing, which has lacked systematic analyses. The focus of this study, however, is not on the large-scale coordination and governance, but rather on opening up the incremental elements and structuration processes, which contribute to the transition little by little, and which can be affected to. This increases the practical importance of this dissertation, by highlighting the importance of very tiny, everyday elements in the change processes in the long run.

Key factors to inoculate Botrytis cinerea in tomato plants

Studies addressing the biological control of Botrytis cinerea have been unsuccessful because of fails in inoculating tomato plants with the pathogen. With the aim of establishing a methodology for inoculation into stems, experiments were designed to assess: i. the aggressiveness of pathogen isolates; ii. the age at which tomato plants should be inoculated; iii. the susceptibility of tissues at different stem heights; iv. the need for a moist chamber after inoculation; and v. the effectiveness of gelatin regarding inoculum adhesion. Infection with an isolate from tomato plants that was previously inoculated into petioles and then re-isolated was successful. An isolate from strawberry plants was also aggressive, although less than that from tomato plants. Tomato plants close to flowering, at 65 days after sowing, and younger, middle and apical stem portions were more susceptible. There was positive correlation between lesion length and sporulation and between lesion length and broken stems. Lesion length and the percentage of sporulation sites were reduced by using a moist chamber and were not affected by adding gelatin to the inoculum suspension. This methodology has been adopted in studies of B. cinerea in tomato plants showing reproducible results. The obtained results may assist researchers who study the gray mold.