Água residuária da mandioca como fertilizante orgânico em pasto de Brachiaria brizantha cv. Marandu

Brazil is the world's second largest producer of cassava, which most of the production is used to make flour and starch, generating large amounts of waste, cassava. In general, this waste is disposed of directly into the soil and waterways, causing serious environmental impacts. In view of this, the aim of this work was to evaluate the use of cassava wastewater water (cassava) as organic fertilizer in Brachiaria brizantha pasture. Marandu. The experiment was conducted at the Campus Macaíba the Federal University of Rio Grande do Norte. The treatments were increasing rates of cassava, applied to the soil as organic fertilizer. The experimental design was a randomized block design with six treatments and four replications. The treatments consist of cassava doses (0, 15, 30, 60 and 120 m³ ha- 1 ) and a treatment with mineral fertilizer (AM) in the form of NPK (140: 30: 120 kg ha-1 ). Three cuts with an interval of 60 days were carried out. The variables evaluated were: plant height; accumulation of morphological components of fodder; Trapping Light (IL); Leaf Area Index (LAI); Total chlorophyll (CT); Feature Production Seca (PMS). The dry matter production at a dose of 120 m³ha-1 had a quantitative increase, with a total production in 2796 kg ha-1 DM in the second cut, providing an increase of 493% compared to control, and the residual effect observed in the third cut caused a 100% increase compared to 0 m³ ha-1 . Comparing the PMS obtained with the use of AM and other treatments it was observed that it was the second cut equivalent to a dose of 120 m³ ha-1 and the third equivalence has been cut at doses 60 and 120 m³ha-1. For the variables plant height, IL, IAF, CT and leaves Mass adding cassava in the soil promoted a positive linear increase for the three cuts. However, with the AM the IAF was superior to the other treatments. The thatched mass reached its highest production (838 kg ha-1 DM) in the second cut when using a dose of 120 m³ha-1 . In dead material mass in the second and third sections, there was increased linearly increased total of 322 and 452% respectively, compared to a dose of 0 m³ha-1 . The use of cassava showed herbicidal effect for the variable mass of the undesirable negative linear response resulting in decreasing the amount of residue with increasing doses. Manipueira can be used as organic fertilizer in Brachiaria brizantha cv. Marandu for improvements in the productive characteristics, as promoted significant increases in 8 most of the variables studied, especially at a dose of 120 m³ha-1 . This benefits the environment by being alternative for disposal of cassava.

Tratamento de cascalho de perfuração utilizando sistemas microemulsionados

The oil industry is one of the activities that generates more waste to the environment. The drill cuttings is a waste generated in large quantities in the drilling process and that may cause environmental damage such as soil contamination and consequently the contamination of groundwater if disposed of without prior treatment. Arises the need to develop scientific activities and research ways to adapt these wastes the current environmental standards. In the case of solid wastes, the NBR 10004: 2004 of the Brazilian Association of Technical Standards (ABNT) classifies them into class I waste (hazardous) and class II (not dangerous), which determines which wastes may or may not be discarded in the environment without causing environmental impact. This study presents a novel alternative for treating drill cuttings, where this waste was classified as class I (Abreu & Souza, 2005), mainly by removing the n-paraffin present in it, since this arises when using drilling fluids base oil. Using microemulsion systems promotes the removal of this contaminant drill cuttings samples from wells located in Alto do Rodrigues - RN. Initially, we determined the concentration of paraffin using infrared method in samples were extracted with ultrasound, we obtained a paraffin concentration in the range from 36.59 to 43.52 g of paraffin per kilogram of cuttings. Used two microemulsion systems containing two nonionic surfactants from different classes, one is an alcohol ethoxylated (UNTL-90) and the other an nonylphenol ethoxylated (RNX 110). The results indicated that the system UNTL-90 surfactant has better efficiency than the system with RNX 110. The study of the influence of contact time at the extraction showed that for times greater than 25 minutes has a tendency to increase the percentage extraction with increasing contact time. It was also observed that the extraction is fast because at 1 minute contact has 22.7% extraction. The reuse of the microemulsion system without removing the paraffin extracted in previous steps, showed reduction of 29.32 in percentage of extraction by comparing the first and third extraction, but by comparing the first and second extractions reduction is 8.5 in percentage extraction, so the systems reuse optimization can be an option for economically viable removing paraffin from cuttings. The extraction with shaking is more effective in the treatment of cuttings, reaching the extraction percentage of 87.04%, that is, obtaining a drill cuttings with 0.551% paraffin. Using the percentage of paraffin employed in non-aqueous drilling fluids and fluid maximum limit on cuttings for disposal established by the Environmental Protection Agency of the United States (US EPA), one arrives at the conclusion that the level of paraffin on gravel cannot exceed 3.93%. Conclude that the amount of paraffin in the treated cuttings with the microemulsion system with shaking is below the established by US EPA, showing that the system used was efficient in removing the paraffin from the drill cuttings.

Estudo de métodos de tratamento de efluentes (troca iônica e eletroquímico) separados e sequenciais para eliminação de derivados de petróleo

The produce of waste and the amount of the water produced coming from activities of petroleum production and extraction has been a biggest challenge for oil companies with respect to environmental compliance due to toxicity. The discard or the reuse this effluent containing organic compounds as BTEX (benzene, toluene, ethylbenzene and xylene) can cause serious environmental and human health problems. Thus, the objective this paper was study the performance of two process (separately and sequential) in one synthetic effluent for the benzene, toluene and xylene removal (volatile hydrocarbons presents in the produced water) through of electrochemical treatment using Ti/Pt electrode and exchange resin ionic used in the adsorption process. The synthetic solution of BTX was prepared with concentration of 22,8 mg L-1, 9,7 mg L-1 e 9,0 mg L-1, respectively, in Na2SO4 0,1 mol L-1. The experiments was developed in batch with 0.3 L of solution at 25ºC. The electrochemical oxidation process was accomplished with a Ti/Pt electrode with different current density (J = 10, 20 e 30 mA.cm-2). In the adsorption process, we used an ionic exchange resin (Purolite MB 478), using different amounts of mass (2,5, 5 and 10 g). To verify the process of technics in the sequential treatment, was fixed the current density at 10 mA cm-2 and the resin weight was 2.5 g. Analysis of UV-VIS spectrophotometry, chemical oxygen demand (COD) and gas chromatography with selective photoionization detector (PID) and flame ionization (FID), confirmed the high efficiency in the removal of organic compounds after treatment. It was found that the electrochemical process (separate and sequential) is more efficient than absorption, reaching values of COD removal exceeding 70%, confirmed by the study of the cyclic voltammetry and polarization curves. While the adsorption (separately), the COD removal did not exceed 25,8%, due to interactions resin. However, the sequential process (electrochemical oxidation and adsorption) proved to be a suitable alternative, efficient and cost-effectiveness for the treatment of effluents petrochemical.

Revestimento decorativo monocamada pigmentado, com resíduo de vidro temperado, para aplicação em fachadas

Although efficient from a technical point of view, mortar layers that make up the traditional masonry coating (slurry mortar, plaster and plaster) have to be in contradiction with the new construction technologies and more efficient methods of consumption and work rationalization. From an environmental point of view, the recovery of waste into new composites for the building has been a growing strand of studies in the scientific community, may prove to be a cost-effective solution in some cases. Thus, this research proposes the development of a mortar Decorative Coating Monolayer (RDM), for use in facades, produced on site, incorporating tempered glass waste (RVT) in the cement matrix, as a partial substitute for aggregate. Therefore, we adopted the binder respect / aggregate of 1: 6 (by volume), consistency index 250mm ± 20, sand substitution levels of glass waste 20%, 50% and 80% and relative water / cement varied in many traits. Two additives were used, a polymer, styrene-butadiene-based, and other chemical, besides mineral and silica fume inorganic pigment in colors red, yellow and blue. Mechanical tests were carried out on fresh pasta and hardened, as well as for the applied coating on masonry, so as to demonstrate the feasibility of the material. In addition, it verified the adequacy of the RDM built environment by means of thermal tests. The results demonstrated the feasibility of the proposed RDM with significantly higher values when compared to norms, especially the dash-added replacement content of 20% and addition of pigment in red. Therefore, the study shows the scientific community as an incentive to the use of technological innovations in construction, increasing the range of alternatives available for housing production, with the proposition of a material that achieves the desired functionality and obtain environmental gain, and may be adopted on construction sites as an alternative industrialized mortars.

Influência da pressão e da vazão de concentrado sobre o desempenho de ultrafiltração no pós-tratamento de esgotos

Despite the numerous advantages resulting from the use of membrane filters technology, intrinsic limitations fouling process become relevant to its applicability. The control of operating conditions is an important tool to mitigate fouling and achieve good levels of efficiency. In this sense, the objective of this study was to investigate the effect of transmembrane pressure and concentrate flow in the performance of ultrafiltration, applied to the post-treatment of domestic sewage. The process was evaluated and optimized by varying the pressure (0.5 and 1.5 bar) and the concentrate flow (300 and 600 L/h), using a 22 factorial design, in order to investigate the effects on the permeate flow and quality of effluents generated at each operating condition. We evaluated the following quality indicators for permeate: pH, electrical conductivity, total suspended solids, turbidity, calcium and Chemical Oxygen Demand (COD). In all tests, we observed marked reduction in the permeate flux at the early stages, followed by a slow decline that lasted until it reaches a relatively constant level, around 120 minutes of filtration. The increased pressure resulted in a higher initial permeate flux, but the decrease of the flow with time is greater for tests at higher pressure, indicating a more pronounced fouling process. On the other hand, increasing the concentrate flow resulted in a slower decline in permeate flux with the filtration time. Regarding the quality of permeate, the transmembrane pressure of 0,5 bar was the one that allowed better results, and was statistically confirmed through the two-way ANOVA test with repeated measures, significant effect of pressure on the turbidity of the permeate. The concentrate flow, in turn, showed no significant influence on any of the quality parameters. Thus, we conclude that, from an economic and environmental point of view, it is more interesting to operate ultrafiltration membrane system with a lower concentrate flow associated with a low transmembrane pressure, since under these conditions will produce less waste, and the permeate will present lower concentrations of the analyzed constituent, especially lower turbidity.

Estudo comparativo dos processos eletroquímicos oxidativos avançados (PEOAs) no tratamento de efluentes contendo corantes orgânicos de difícil degradação

Organic dyes have been widely used in various branches of dyeing industries. These compounds are known to be very toxic, mutagenic, cancinogenic only cause aesthetic pollution and irreversible damage to aquatic ecosystems and human health. Are recalcitrant contaminants due to its high stability and resistance to photobleaching and bio. Given this context, the search for technologies that can minimize the effects of such pollutants is required. In recent decades the Electrochemical Oxidation Process Advanced (PEOAs) based on the generation of strongly oxidizing species (radicals ●OH) offer promising approaches for the prevention of problems caused by industrial effluents. This study analyzed the degradation and mineralization of textile dyes and the study of a real effluent in order to assess the feasibility of PEOAs: Electro-Fenton (EF), Photo Electro-Fenton (PEF) and anodic oxidation (AO), and these methods still was studied the Solar Fotoelectro-Fenton (SPEF) in a pre-pilot plant, in order to study the electrochemical treatment on an industrial scale. In the study has compared the effect of PEOAs in the removal of color, TOC and decay kinetics of degradation of the compounds, and also for using the Congo Red (CR) SPEF studies were performed mineralization current efficiency (MCE). The best results are given to the treatment of the PEF for all the studied dyes. From the results it was possible to choose the PEF as the most effective and promising for application of treatment when compared to other methods of treatment, and prove from SPEF that the process can be used in industrial scales, since this method PEF has been improved and solar irradiation replaced the UVA lamp.

Estudo comparativo dos processos eletroquímicos oxidativos avançados (PEOAs) no tratamento de efluentes contendo corantes orgânicos de difícil degradação

Organic dyes have been widely used in various branches of dyeing industries. These compounds are known to be very toxic, mutagenic, cancinogenic only cause aesthetic pollution and irreversible damage to aquatic ecosystems and human health. Are recalcitrant contaminants due to its high stability and resistance to photobleaching and bio. Given this context, the search for technologies that can minimize the effects of such pollutants is required. In recent decades the Electrochemical Oxidation Process Advanced (PEOAs) based on the generation of strongly oxidizing species (radicals ●OH) offer promising approaches for the prevention of problems caused by industrial effluents. This study analyzed the degradation and mineralization of textile dyes and the study of a real effluent in order to assess the feasibility of PEOAs: Electro-Fenton (EF), Photo Electro-Fenton (PEF) and anodic oxidation (AO), and these methods still was studied the Solar Fotoelectro-Fenton (SPEF) in a pre-pilot plant, in order to study the electrochemical treatment on an industrial scale. In the study has compared the effect of PEOAs in the removal of color, TOC and decay kinetics of degradation of the compounds, and also for using the Congo Red (CR) SPEF studies were performed mineralization current efficiency (MCE). The best results are given to the treatment of the PEF for all the studied dyes. From the results it was possible to choose the PEF as the most effective and promising for application of treatment when compared to other methods of treatment, and prove from SPEF that the process can be used in industrial scales, since this method PEF has been improved and solar irradiation replaced the UVA lamp.

Do reconhecimento à efetividade do direito fundamental à água: diálogos entre Nicarágua e Brasil

La humanidad está en un periodo de transición paradigmática, donde aún no existe acuerdo sobre en cual periodo nos encuadramos, sí modernidad o posmodernidad, pero el debate de ahí surgido se revela útil y transversal a los dilemas que enfrenta hoy la sociedad. Uno de esos dilemas tiene que ver con el reconocimiento del agua como derecho fundamental, ciertamente la era de la información ha permitido avanzar en armar el rompecabezas de la crisis hídrica mundial y sus riesgos, lo que ha develado una realidad importante, el acceso al agua tanto en naciones económicamente desarrolladas como en las menos desarrolladas constituye aun una aspiración, son varias las causas de esto, siendo una de las más comunes la atribuida al cambio climático, sin embargo, al profundizar en la materia surgen otras causas como la falta de voluntad política a nivel nacional, los intereses económicos que dan al agua tratamiento de mercancía y a nivel internacional la existencia de luces y sombras en el campo de los derechos humanos, estas constituyen las piezas del mencionado rompecabezas, aun por armar. Mientras tanto el Derecho tiene aquí un desafío de significativa importancia, adaptarse a fin de responder adecuadamente a las nuevas realidades: riesgos de diversas índoles. Esta investigación tiene como objetivo defender la existencia del derecho fundamental al agua en el ordenamiento jurídico brasileño y nicaragüense, comparando instrumentos que puedan asegurar su efectividad. Para la realización de este trabajo se utilizó un abordaje inductivo-comparativo, fuentes bibliográficas brasileñas, nicaragüenses y de países con experiencias relevantes para la comprensión del problema y que pudieran aportar propuestas de cara al reconocimiento y efectivación del derecho fundamental al agua. Este trabajo encontró que existen ambigüedades importantes en el campo del Derecho Humano al Agua motivadas por el trabajo de agencias que defienden el derecho pero a la vez establecen coordinaciones y normativas con quienes impulsan su privatización, fue posible presentar elementos que apoyan la fundamentalidad del derecho al agua desde un punto de vista material y de vinculación con otros derechos fundamentales, pero preocupa en el caso de Brasil y Nicaragua el poco avance jurisprudencial de cara al reconocimiento y finalmente la atribución de la crisis hídrica en muchos casos a la incertidumbre climática, cuando uno de los principales desafíos se encuentra en la explotación comercial del agua.

Tratamento Endovascular de Patologia da Aorta Torácica: Experiência Institucional

Introdução: O tratamento endovascular da aorta torácica (TEVAR) é uma modalidade terapêutica emergente que tem vindo a revolucionar a abordagem de diferentes tipos de patologia da aorta na sua localização torácica. Objetivos: Avaliação da experiência institucional do serviço de angiologia e cirurgia vascular. Métodos: Análise retrospetiva da série consecutiva de todos os doentes com patologia da aorta torácica e/ou toracoabdominal submetidos a TEVAR na nossa instituição. Foram excluídos aqueles com uso concomitante de endopróteses fenestradas/ramificadas abdominais. Resultados: Desde abril de 2005 até abril de 2014, 79 doentes foram submetidos a TEVAR, com idade média de 66 ± 12,83 anos (máx: 86; mín: 14). As indicações incluíram: 46 aneurismas (58%), 17 dissecções aórticas clássicas tipo B (22%), 13 no contexto de outras síndromes aórticas agudas (16%), 2 por ateroembolismo (3%) e um por fístula aortoesofágica (1%). Na patologia aneurismática, a distribuição anatómica da doença foi a seguinte: 5 na aorta ascendente e arco aórtico (11%), 35 na aorta torácica descendente (76%) e 6 toracoabdominal (13%). O diâmetro médio das dilatações aneurimáticas foi de 69,64 mm (máx: 150 mm). A rotura foi uma apresentação da patologia em 21,5% dos doentes (n = 17); 20,9% dos doentes tinham antecedentes de cirurgia aórtica prévia. A dissecção aórtica tipo B complicada foi a segunda indicação mais comum, sendo de apresentação aguda em 13 (76%) e crónica em 4 (24%). As complicações na base da intervenção foram dilatação aneurismática em 35% (n = 6), malperfusão com isquemia de órgão alvo 47% (n = 8), desconhecida em 18% (n = 3). Foi realizada extensão distal com stent descoberto (Petticoat) em 9 casos (41,2%) e foram realizados procedimentos adjuvantes em 18% (stenting renal n = 2; stenting ilíaco n = 1). Dentro das outras síndromes aórticas agudas, o TEVAR foi realizado no contexto de úlcera aórtica penetrante (n = 4), hematoma intramural (n = 4) e os restantes por rotura/pseudoaneurisma (n = 5). As endopróteses utilizadas foram: 32 Valiant Medtronic®, 15 TAG Gore®, 25 Zenith TX2 Cook®, 2 Zenith TX1 Cook®, uma Relay Plus®, 3 Talent Medtronic® e outras em 1%. A mediana de dias de cuidados intensivos foi 2 (intervalo 0-42) e a mediana de suporte tranfusional foi de 2 UCE. A taxa de mortalidade aos 30 dias ou intra-hospital foi de 18% (n = 14). Atendendo ao timing da cirurgia, a taxa de mortalidade aferida nos casos electivos foi de 8% (4/50) e nos urgentes atinge os 35% (10/29). Intraoperatoriamente foram tratadas 7 complicações relacionadas com vaso de acesso membro, 2 casos de dissecção aórtica iatrogénica, um caso de trombose arterial inferior e um endoleak tipo IA. A taxa de reintervenções foi de 17%, com as seguintes indicações: 9 endoleaks, 2 isquemias mesentéricas e 2 fístulas aortoesofágicas. Conclusões: A série apresentada traduz uma experiência institucional favorável com resultados reprodutíveis e que o TEVAR é um procedimento seguro e eficaz para o tratamento de diferentes patologias da aorta torácica, quando comparado com o tratamento cirúrgico aberto.

Modulação da capacidade antioxidante e de detoxificação no peixe Cyprinus carpio (Cyprinidae) após tratamento com nanocápsulas de ácido lipóico

O metabolismo aeróbico é muito eficiente no processo de geração de energia, no entanto, é uma fonte de produção de espécies reativas de oxigênio (ERO). Para a prevenção dos efeitos potencialmente danosos dessas ERO, os organismos desenvolveram um sistema de defesa antioxidante (SDA), que inclui compostos enzimáticos e não enzimáticos. O ácido lipóico (AL) é uma molécula lipo e hidro solúvel, com capacidade de atravessar membranas celulares. Ele possui propriedades antioxidantes, auxiliando na eliminação de ERO, induzindo a expressão de genes importantes nas defesas antioxidantes, quelando metais e interagindo com outros antioxidantes. Trabalhos prévios demonstraram que nanocápsulas poliméricas de ácido lipóico favoreceram a proteção deste antioxidante, aumentando sua estabilidade físico- química em comparação com formulações contendo ácido lipóico livre. O objetivo deste estudo foi avaliar e comparar o efeito do AL livre e do AL em nanocápsulas sobre a atividade de enzimas antioxidantes (glutamato-cisteína ligase, GCL e glutationa-S- transferase, GST), a concentração de glutationa reduzida (GSH) e sub-produtos da peroxidação lipídica (malondealdeído, método TBARS) e da expressão de genes que codificam para as diferentes formas da enzima GST (alfa e pi). Para isso o peixe Cyprinus carpio (Cyprinidae) foi exposto a uma dose de 40 mg/kg a diferentes formas de AL (livre e em nanocápsulas) por injeção intraperitoneal (duas injeções, sendo a primeira no tempo 0 e a segunda após 24 h), sendo logo sacrificados a diferentes tempos da primeira injeção (48 h, 96 h e uma semana), sendo dissecados o cérebro, fígado e músculo dos peixes de cada tratamento. Os resultados obtidos indicam que os órgãos respondem de forma diferente. A curto prazo, o fígado foi o principal órgão a apresentar respostas antioxidantes após tratamento com AL, enquanto que a longo prazo o cérebro e o músculo se mostraram mais responsivos em termos antioxidantes quando 6 comparado ao fígado. Foi também importante a forma em que o AL é administrado, livre ou em nanocápsulas, sendo observado que um mesmo órgão em um mesmo tempo de exposição pode responder de forma diferente de acordo com o tipo de AL que está sendo utilizado. Além disso, o efeito antioxidante do AL nanoencapsulado parece ser mais efetivo quando utilizado a longo prazo, sugerindo que a forma nanoencapsulada libera o antioxidante em forma mais lenta. Os resultados também indicam que a composição da nanocápsulas deve ser levada em consideração, uma vez que foi observado um efeito antioxidante significativo nos tratamentos que continham apenas a nanocápsulas, sem o AL. Sugere-se que este efeito ocorra devido à produção endógena do próprio antioxidante em questão, favorecida pela composição da própria nanocápsula, que possui ácido octanóico, substrato para a síntese de AL. Também se observou um efeito pró-oxidante em alguns tratamentos onde foi utilizada esta formulação, sugerindo que alguns componentes da nanocápsula, como por exemplo, o surfactante que é utilizado para estabilizar a suspensão, possam aumentar a suscetibilidade dos órgãos ao estresse oxidativo.

Direitos do aluno em contexto escolar : um estudo comparado entre o Ensino Secundário Público e o privado no Concelho de Lisboa

Considerando o importante papel que as instituições educativas desempenham na formação das crianças e dos jovens, o respeito pelos direitos dos alunos é condição fundamental, para lhes proporcionar uma educação de qualidade. Partindo desta consciência, resolvemos efetuar um estudo de caso, numa escola da rede pública de ensino e numa escola da rede privada de ensino, ambas situadas no concelho de Lisboa, com o objetivo de conhecer as perceções dos alunos sobre a promoção dos seus direitos em contexto escolar e descortinar as semelhanças e as diferenças entre os dois contextos educativos, atendendo à diferente natureza jurídica das duas instituições. Para concretizarmos esse objetivo, formulámos as seguintes perguntas derivadas, cujas respostas procuraremos obter no decurso do nosso estudo: (i) os alunos têm conhecimento de que são titulares de direitos?; (ii) exercem os seus direitos em condições de plena igualdade e sem qualquer discriminação?; (iii) o interesse superior do aluno é a primordial consideração que a Escola tem em conta, em todos os assuntos que lhe dizem respeito?; (iv) o direito à vida, à sobrevivência e ao desenvolvimento dos alunos é garantido na Escola? e (v) a opinião dos alunos é tida em consideração, em todos os assuntos que lhes dizem respeito?. Para atingirmos os objetivos que delineamos, desenvolvemos um estudo de caso, recorrendo a uma abordagem metodológica predominantemente qualitativa, com recurso a técnicas variadas, designadamente a entrevista, o inquérito por questionário e a análise documental. Procedemos à revisão da literatura, de acordo com as áreas conceptuais previamente definidas, que se consubstanciaram nos princípios gerais de direito internacional, consignados na Convenção sobre os Direitos da Criança de 1989, e à luz dos quais todos os direitos nela constantes devem ser interpretados: o princípio da não discriminação, o princípio do interesse superior da criança, o direito à vida, à sobrevivência e ao desenvolvimento, e o princípio do respeito pelas opiniões da criança. A análise dos conceitos e da diferente natureza jurídica das duas instituições foi, também, objeto do nosso estudo. Por outro lado, a legislação portuguesa relacionada com os direitos dos alunos, também, foi por nós revista neste estudo, nomeadamente, os diversos estatutos do aluno que se sucederam no tempo. A análise dos resultados obtidos permitiu-nos concluir que o respeito dos direitos dos alunos, nas suas diversas dimensões, não foi ainda totalmente conseguido, sobretudo o seu direito à não discriminação e o seu direito à participação a nível micro e meso. Não se podendo generalizar o estudo, a comunidade educativa tem de desenvolver um esforço para a compreensão da dimensão e da importância do respeito dos direitos dos alunos, sobretudo na criação de um clima democrático, que favoreça a plena igualdade de oportunidades a todos os alunos e a livre escolha do projeto educativo pelas famílias das crianças e dos jovens.

Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.

Sobreposição de coisa julgada: uma perspectiva no exterior e no Brasil em busca de uma solução adequada para o direito brasileiro

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Direito, Programa de Pòs-Graduação em Direito, 2015.

O efeito do tratamento da atapulgita no desenvolvimento de compósito com o polietileno reciclado

The study aimed at the treatment of attapulgite for the development and characterization of composite recycled low density polyethylene - PEBD_rec embedded with natural attapulgite - ATP_NAT, sifted - ATP_PN and attapulgite treated with sulfuric acid - ATP_TR in different compositions (1, 3 and 5%) and compared with the PEBD_rec. The atapulgitas, natural, screened and treated, were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and determining the area specific surface (BET). The composites were characterized by thermogravimetry (TG), differential scanning calorimetry (DSC), Xray diffraction (XRD), torque rheometry, scanning electron microscopy (SEM) and traction. The composite PEBD_rec / ATP (natural, sieved and treated) were produced by mixing in the molten state in a single screw extruder matrix wire with subsequent reprocessing matrix tape. It was found that the screening of attapulgite not reduce the quantity of quartz and the acid treatment completely extracted dolomite aggregate impurities of the channels attapulgite, and increase their surface area. The addition of attapulgite in PEBD_rec acts as a catalyst, reducing the thermal stability of the polymer. The increased concentration of attapulgite, increases resistance and reduces the elongation at break and modulus of elasticity of the composite PEBD_rec / attapulgite

O crime de condução perigosa de veículo rodoviário e a sua perceção pelos militares da GNR afetos a fiscalização rodoviária

The Republican National Guard has a core role concerning the security of Portugal’s roads since a significant part of them are under its responsibility. Dangerous driving is a crime that happens less times that other two crimes (driving without a license and driving under the influence), but it isn’t covered by the media like those two, much to the small number of reports written by the Security Forces. This work aims to approach the particularity of this crime given it poses a real threat and because its report requirements are far demanding. The thesis is divided in two parts. The first one develops the theory frame through the analysis of documents. The second part deals with the processing of fines from selected samples. The conclusion of this study states that there is a way of reducing situations that could result in this type of crime using fines. Other conclusion points to the fact that the time gap between the occurrence of the crime and a judge’s sentence is substantial, meaning that the military from the Republican National Guard often opt for the second option because the sentences and the security measures for this crime can often find parallel in other type of crimes. The about 200 sentences reached per day from courts all over the country when tied to the 700/800 criminal defenses mean that the National Authority for Road Security is overloaded with administrative work, which is a problem that could be surpassed with the implementation of a new document and a different access to the data of each driver through the National Authority for Road Security’s website.