Sinkityslinjan pesuosan optimointi

Työn tavoitteena oli sinkityslinjan pesuosan toiminnan optimointi. Teoriakatsauksen ja haastattelututkimusten avulla työssä selvitettiin, mitkä tekijät pesuosalla tai teräsnauhan pesua edeltävissä prosessivaiheissa vaikuttavat pesutehoon alentavasti. Pesuosan ajoparametrien muutoskokeiden avulla määritettiin kunkin pesuparametrin suhteellinen vaikutus pesutulokseen sekä pesuosan optimaaliset ajoparametrit. Vaikutuksia arvioitiin pinnanpuhtauden ja pesuvesien laboratorioanalyysien sekä prosessidatan avulla. Jätevesianalyysien ja prosessidatan avulla arvioitiin lisäksi pesuosan muutosten vaikutusta pesusta syntyviä jätevesiä käsittelevän jätevesilaitoksen toimintaan. Laitetestauksen avulla työssä kartoitettiin, mikä menetelmä pinnanpuhtauden määrittämiseen soveltuu pesuosalle parhaiten. Kustannusarvioinnilla selvitettiin, millä toimin pesuosan toimintavarmuutta on edullisinta ylläpitää. Työn tulosten pohjalta lämpötilalla todettiin olevan pesutuloksen kannalta merkittävin vaikutus. Sen sijaan kemikaaliannostelun merkitys oli vähäinen. Vesien säännöllisen uudistamisen todettiin olevan olennainen pesuvesien ylläpitokeino nykyisessä pesutilanteessa. Se todettiin lisäksi ennakoivana toimenpiteenä kannattavammaksi kuin pesuosan täystyhjäykset ongelmatilanteissa. Teippitestein määritettävälle pinnanpuhtaudelle katsottiin sopivaksi vaihteluväliksi 40–75 %. Työssä todettiin, että pesua edeltävän kylmävalssin valssiöljyn vaihto sekä valssilla tuotetun teräsnauhan pinnanpuhtaus vaikuttavat merkittävästi pesuosan toimintakykyyn ja pesuosan pyörittämisestä aiheutuviin kustannuksiin. Toimenpiteet pesuosalla vaikuttavat lisäksi jätevesilaitoksen käsittelyvaatimuksiin, joskin myös tasaavat sen toimintaa. Työssä ehdotettiin ratkaisukeinoja pesuosan toimintavarmuuden varmistamiseksi jatkossa, sekä tarjottiin työkaluja, joiden avulla tulevissa investointipäätöksissä voidaan ottaa huomioon myös pesuosan toiminnan edellytykset.

Ristinivel nelivalssaimen voimansiirrossa

Nelivalssaimia käytetään yleisesti metallinauhojen ja -levyjen kylmämuovaukseen. Valssaimissa ristinivel siirtää vääntömomenttia kahden kulmassa olevan akselin välillä. Tässä tutkimuksessa haettiin ratkaisuja nelivalssaimessa esiintyvään epäsymmetriseen taivutustarpeeseen. Valssattavat kuparinauhat alkavat aaltoilla valssaajan puolelta noin yhden millimetrin paksuudessa. Tutkimuksen tarkastelu rajattiin koskemaan vain voimansiirrossa olevaa ristiniveltä, jonka epäiltiin olevan yksi mahdollinen ongelman aiheuttaja. Tutkimuksessa selvisi, että ristinivel ei aiheuta pystysuuntaisia voimia, jotka vaikuttaisivat suoraan nauhan poikkipintaprofiiliin. Kuitenkin ristinivelen aiheuttamat vaakasuuntaiset voimat voivat vaikuttaa epäsuorasti nauhan poikkipintaprofiiliin. Laatupoikkeamien taloudellinen merkitys havaittiin pieneksi, mutta myöhemmissä prosessivaiheissa kuparinauhan epäsymmetrinen poikkipintaprofiili aiheutti ongelmia.

Dermatan sulfate reduces monocyte chemoattractant protein 1 and TGF-β production, as well as macrophage recruitment and myofibroblast accumulation in mice with unilateral ureteral obstruction

Selectins play an essential role in most inflammatory reactions, mediating the initial leukocyte-rolling event on activated endothelium. Heparin and dermatan sulfate (DS) bind and block P- and L-selectin function in vitro. Recently, we reported that subcutaneous administration of DS inhibits colon inflammation in rats by reducing macrophage and T-cell recruitment and macrophage activation. In the present study, we examined the effect of porcine intestinal mucosa DS on renal inflammation and fibrosis in mice after unilateral ureteral obstruction (UUO). Twenty-four adult male Swiss mice weighing 20-25 g were divided into 4 groups: group C (N = 6) was not subjected to any surgical manipulation; group SH (N = 6) was subjected to surgical manipulation but without ureter ligation; group UUO (N = 6) was subjected to unilateral ureteral obstruction and received no treatment; group UUO plus DS (N = 6) was subjected to UUO and received DS (4 mg/kg) subcutaneously daily for 14 days. An immunoblot study was also performed for TGF-β. Collagen (stained area ~3700 µm²), MCP-1 (stained area ~1700 µm²), TGF-β (stained area ~13% of total area), macrophage (number of cells ~40), and myofibroblast (stained area ~1900 µm²) levels were significantly (P < 0.05) higher in the UUO group compared to control. DS treatment significantly (P < 0.05) reduced the content of collagen (stained area ~700 µm²), MCP-1 (stained area ~160 µm²) and TGF-β (stained area ~5% of total area), in addition to myofibroblast (stained area ~190 µm²) and macrophage (number of cells ~32) accumulation in the obstructed kidney. Overall, these results indicate that DS attenuates kidney inflammation by reducing macrophage recruitment, myofibroblast population and fibrosis in mice submitted to UUO.

Effect of heat input on the mechanical properties of welded joints in high strength steels

Experiments were carried out to determine the properties of the welded joints in 8mm thick high-strength steels produced by quenching and tempering and thermomechanical rolling with accelerated cooling (tensile strength 821–835 MPa). The dependence of the strength, elongation, hardness, impact energy and crack opening displacement on the heat input in the range 1.0–0.7 kJ mm21 was determined. The results show that the dependence of the strength of the welded joints decreases and that of the elongation increases. The heat input has only a slight effect on the impact energy and crack opening displacement in the heat-affected zone.

Trilling race : the political economy of racialised visual-aural encounters

This thesis investigates the matter of race in the context of Finnish language acquisition among adult migrants in Finland. Here matter denotes both the materiality of race and how race comes to matter. Drawing primarily on an auto/ethno/graphic account of learning the Finnish language as a participant in the Finnish for foreigners classes, this thesis problematises the ontology and epistemology of race, i.e., what race is, how it is known, and what an engagement with race entails. Taking cues from the bodily practices of learning the Finnish trill or the rolling r, this study proposes a notion of “trilling race” and argues for an onto-epistemological dis/continuity that marks race’s arrival. The notion of dis/continuity reworks the distinction between continuity and discontinuity, and asks about the how of the arrival of any identity, the where, and the when. In so doing, an analysis of “trilling race” engages with one of the major problematics that has exercised much critical attention, namely: how to read race differently. That is, to rethink the conundrum of the need to counter “representational weight” (Puar 2007, 191) of race on the one hand, and to account for the racialised lived realities on the other. The link between a study of the phenomenon of host country language acquisition and an examination of the question of race is not as obvious as it might seem. For example, what does the argument that the process of language learning is racialised actually imply? Does it mean that race, as a process of racialisation or an ongoing configuration of sets of power relations, exerts force from an outside on the otherwise neutral process of learning the host country language? Or does it mean that race, as an identity category, presents as among the analytical perspectives, along with gender and class for instance, of the phenomenon of host country language acquisition? With these questions in mind, and to foreground the examination of the question of race in the context of Finnish language acquisition among adult migrants, this thesis opens with a discussion of the art installation Finnexia by Lisa Erdman. Finnexia is a fictitious drug said to facilitate Finnish language learning through accelerating the cognitive learning process and reducing the anxiety of speaking the Finnish language. Not only does the Finnexia installation make visible the ways in which the lack of skill in Finnish is fgured as the threshold – a border that separates the inside from the outside – to integration, but also, and importantly, it raises questions about the nature of difference, and the process of differentiation that separates the individual from the social, fact from fiction, nature from culture. These puzzles animate much of the analysis in this dissertation. These concerns continue to be addressed in the rest of part one. Whereas chapter two offers a reconsideration of the ambiguities of ethnisme/ethnicity and race, chapter three dilates on the methodological implications of a conception of the dis/continuity of race. Part two focuses on the matter of race and examines the political economy of visual-aural encounters, whereas part three shifts the focus and rethinks the possibilities and limitations of transforming racialised and normative constraints. Taking up these particular problematics, this thesis as a whole argues that race trills itself: its identity/difference is simultaneously made possible and impossible.

Market anomalies and tactical asset allocation: Utilising market anomalies in multiple asset class portfolios with the Black−Litterman model

This thesis discusses the basic problem of the modern portfolio theory about how to optimise the perfect allocation for an investment portfolio. The theory provides a solution for an efficient portfolio, which minimises the risk of the portfolio with respect to the expected return. A central feature for all the portfolios on the efficient frontier is that the investor needs to provide the expected return for each asset. Market anomalies are persistent patterns seen in the financial markets, which cannot be explained with the current asset pricing theory. The goal of this thesis is to study whether these anomalies can be observed among different asset classes. Finally, if persistent patterns are found, it is investigated whether the anomalies hold valuable information for determining the expected returns used in the portfolio optimization Market anomalies and investment strategies based on them are studied with a rolling estimation window, where the return for the following period is always based on historical information. This is also crucial when rebalancing the portfolio. The anomalies investigated within this thesis are value, momentum, reversal, and idiosyncratic volatility. The research data includes price series of country level stock indices, government bonds, currencies, and commodities. The modern portfolio theory and the views given by the anomalies are combined by utilising the Black-Litterman model. This makes it possible to optimise the portfolio so that investor’s views are taken into account. When constructing the portfolios, the goal is to maximise the Sharpe ratio. Significance of the results is studied by assessing if the strategy yields excess returns in a relation to those explained by the threefactormodel. The most outstanding finding is that anomaly based factors include valuable information to enhance efficient portfolio diversification. When the highest Sharpe ratios for each asset class are picked from the test factors and applied to the Black−Litterman model, the final portfolio results in superior riskreturn combination. The highest Sharpe ratios are provided by momentum strategy for stocks and long-term reversal for the rest of the asset classes. Additionally, a strategy based on the value effect was highly appealing, and it basically performs as well as the previously mentioned Sharpe strategy. When studying the anomalies, it is found, that 12-month momentum is the strongest effect, especially for stock indices. In addition, a high idiosyncratic volatility seems to be positively correlated with country indices on stocks.

Design and Simulation of High-Speed Rotating Electrical Machinery

Global energy consumption has been increasing yearly and a big portion of it is used in rotating electrical machineries. It is clear that in these machines energy should be used efficiently. In this dissertation the aim is to improve the design process of high-speed electrical machines especially from the mechanical engineering perspective in order to achieve more reliable and efficient machines. The design process of high-speed machines is challenging due to high demands and several interactions between different engineering disciplines such as mechanical, electrical and energy engineering. A multidisciplinary design flow chart for a specific type of high-speed machine in which computer simulation is utilized is proposed. In addition to utilizing simulation parallel with the design process, two simulation studies are presented. The first is used to find the limits of two ball bearing models. The second is used to study the improvement of machine load capacity in a compressor application to exceed the limits of current machinery. The proposed flow chart and simulation studies show clearly that improvements in the high-speed machinery design process can be achieved. Engineers designing in high-speed machines can utilize the flow chart and simulation results as a guideline during the design phase to achieve more reliable and efficient machines that use energy efficiently in required different operation conditions.

ETO-Tuotekehitysprojektin suorituskyvyn mittaaminen

Tutkimuksen tavoitteena oli selvittää, mitä suorituskyvyn osa-alueita ETO (Engineer To Order) – tyyppinen tuotekehitysprojekti pitää sisällään, ja mitkä niistä ovat projektin onnistumisen kannalta tärkeimpiä, eli niin sanottuja menestystekijöitä. Edelleen näiden tunnistettujen menestystekijöiden pohjalta oli tavoitteena kehittää suorituskyvyn mittausmalli, jonka avulla voisi arvioida ja ohjata projektin ja projektinhallinnan suorituskykyä. Tärkeimmät suorituskyvyn näkökulmat tässä mallissa olivat projektin kannattavuuden -, asiakastyytyväisyyden - ja projektinhallinnan näkökulmat. Malli tehtiin rautatieliikenne toimialalla toimivalle yritykselle, joka asetti omat vaatimuksensa mallille. Tutkimus tehtiin kolmivaiheisesti. Ensimmäisessä vaiheessa tutustuttiin aiempiin tutkimuksiin, joiden pohjalta pyrittiin löytämään projektin menestystekijät, sekä näiden suorituskyvyn analysointiin toimiviksi todetut mittausmenetelmät. Ensimmäisessä vaiheessa tutustuttiin myös alaa ohjaaviin standardeihin, ja niiden asettamiin erityisvaatimuksiin projektien suorituskyvyn mittaukselle. Tutkimuksen toinen vaihe oli tapaustutkimus kohdeyrityksen sisäiselle projektiorganisaatiolle, joka toteutettiin survey-kyselynä. Kyselyn avulla pyrittiin löytämään ne menestystekijät, jotka projektiorganisaation itsensä mielestä olivat kaikkein tärkeimpiä projektin onnistumisen kannalta. Kyselyllä pyrittiin myös selvittämään sidosryhmien välisiä näkemyseroja projektin menestystekijöistä. Kysymykset muodostettiin synteesinä tutkimuksen ensimmäisessä vaiheessa löydetyistä menestystekijöistä ja standardien vaatimista pakollisista mitattavista tekijöistä. Tärkeimmäksi menestystekijäksi kyselyssä nousi projektipäällikön kompetenssi. Kyselyssä vastaajilta kysyttiin myös sitä, minkä menestystekijöiden suorituskykyä heidän mielestään tulisi mitata. Tärkeimmäksi mitattavaksi osa-alueeksi nousi aikataulun tarkka seuranta. Kolmannessa vaiheessa näiden kohdeyrityksen menestystekijöiden pohjalta luotiin mittausmalli, joka pyrkii mittaamaan projektin ja projektinhallinnan suorituskykyä tasapainoisesti valituista näkökulmista. Malli ottaa huomioon erityisesti projektinhallinnan suorituskyvyn vaikutuksen projektin lopputuotteena syntyvien hyödykkeiden laatuun. Kohdeyrityksen kokonaissuorituskyvyn kannalta on erittäin tärkeää parantaa projektien suorituskykyä, johon projektien suorituskyvyn mittaaminen on ratkaisu. Standardien asettamat vaatimukset antavat hyvät lähtökohdat kokonaisvaltaisen mittausjärjestelmän luomiselle.

Valssien käytettävyys ja kunnossapito terästehtaassa

Valssi on valssauslaitteiston keskeinen komponentti. Valssauksessa aihiota muokataan kuljettamalla sitä kahden valssin muodostaman raon välistä. Valssit altistuvat valssausprosessissa korkealle lämpötilalle ja pintapaineelle. Valsseille asetettavat vaatimukset tiukkenevat tuottavuuden vaatimusten kiristyessä. Valssit, yhtenä valssauslaitteiston komponenteista, muodostavat suuren osan valssauksen kustannuksista, joten valssien käyttöiän pidentämisen avulla voidaan parantaa valssauksen tuottavuutta ja kustannustehokkuutta. Tässä tutkimuksessa tarkasteltiin valssien käytettävyyttä ja kunnossapitoa, sillä näitä asioita kehittämällä on mahdollista saavuttaa valsseille pidempi kestoikä. Tutkimus toteutettiin kirjallisuusselvityksenä, jota täydennettiin valssausta tekevien yritysten haastatteluilla. Tavoitteena oli kerätä saatavissa oleva kirjallinen ja hiljainen tieto yksiin kansiin ja tutkia mahdollisia syy-seuraussuhteita valssien käytettävyyteen vaikuttavien ilmiöiden sekä valssien kulumisen ja vaurioitumisen välillä. Tutkimuksessa havaittiin, että vauriotyypit ovat riippuvaisia valssausprosessista, jolla tarkoitetaan, että kuuma- ja kylmävalssauksessa esiintyy erilaisia vauriotyyppejä. Kuuma- ja kylmävalssauksessa myös valssien kulumiseen vaikuttavat erilaiset ilmiöt. Valssien kulumista ja vaurioita on mahdollista ehkäistä erilaisilla pintakäsittely- ja pinnoitusmenetelmillä. Valssien kunnossapidon toteutusta tutkittaessa havaittiin, että kuluneiden valssien vaihto kunnostettuihin pyritään suorittamaan mahdollisimman nopeasti ja tätä varten on saatavilla kyseiseen tarkoitukseen kehitettyjä laitteistoja. Kuluneet valssit sorvataan ja hiotaan, jotta niiden pinnasta saadaan tasainen ja saavutetaan haluttu halkaisija. Tämän jälkeen pinnoitusmenetelmiä on mahdollista suorittaa uudelleen. Kunnossapitotoimenpiteet tehdään joko yrityksen omalla korjaamolla tai alihankintana toisen yrityksen tiloissa.

Grass-endophyte coevolution and ploidy levels in fescues

ABSTRACT Fescues consist of wild and cultivated grasses that have adapted to a wide range of environmental conditions. They are an excellent model species for evolutionary ecology studies that investigate symbiosis and polyploidization and their effects on plant performance. First, they are frequently infected with symbiotic endophytic fungi known to affect a plant’s ability to cope with biotic and abiotic environmental factors. Second, fescue species have been reported to have substantial intraspecific variation in their ploidy level and morphology. In my thesis, I examined large-scale generalizations for frequency of polyploidy and endophyte infections and their effects on plant morphology. As a model species, I selected red (Festuca rubra) and viviparous sheep’s (F. vivipara) fescues. They are closely related, but they differ in terms of distribution and endophyte infection frequency. I investigated the biogeographic pattern and population biology of 29 red and 12 viviparous sheep’s fescue populations across ≈300 latitudes in Europe (400-690 N). To examine plant ploidy levels, I implemented time- and cost-efficient plate-based high throughput flow cytometric analysis. This efficient procedure enabled me to analyze over 1000 red fescue individuals. I found three ploidy levels among them: overall 84 %, 9 % and 7 % of the red fescue plants were hexaploid, tetraploid and octoploid, respectively. However, all viviparous sheep’s fescue plants were tetraploid. Ploidy level of red fescue appeared to some extent follow gradients in latitude and primary production as suggested by previous studies, but these results could be explained better by taking the sampling design and local adaptation into account. Three Spanish populations were mostly tetraploids and one high elevation population in northernmost Finland (Halti) was octoploid, while most other populations (25 sites) were dominated by hexaploids. Endophyte infection frequencies of wild fescue populations varied from 0 to 81 % in red fescue populations and from 0 to 30 % in viviparous sheep’s fescue populations. No gradients with latitude or primary production of the sites were detected. As taxonomy of red fescues is somewhat unclear, I also studied morphology, ploidy variation and endophyte status of proposed subspecies of European red fescues. Contrary to previous literature, different ploidy levels occurred in the same subspecies. In addition to wild fescues, I also used two agronomically important cultivars of meadow and tall fescue (Schedonorus phoenix and S. pratensis). As grass-legume mixtures have an agronomic advantage over monocultures in meadows, I carried out a mixture/competition experiment with fescues and red clover to find that species composition, nutrient availability and endophyte status together determined the total biomass yield that was higher in mixtures compared to monocultures. The results of this thesis demonstrate the importance of local biotic and abiotic factors such as grazing gradients and habitat types, rather than suggested general global geographical or environmental factors on grass polyploidization or its association with symbiotic endophytic fungi. I conclude that variation in endophyte infection frequencies and ploidy levels of wild fescues support the geographic mosaic theory of coevolution. Historical incidents, e.g., glaciation and present local factors, rather than ploidy or endophyte status, determine fescue morphology.

Does Gamma-aminobutyric acid function as a plant resistance mechanism against phytophagous insect activity? /

Gamma-aminobutyric acid (GAB A) is a ubiquitous non-protein amino acid synthesized via the decarboxylation of L-glutamate in a reaction catalyzed by the cytosolic enzyme L-glutamate decarboxylase (GAD). In animals it functions as an inhibitory neurotransmitter. In plants it accumulates rapidly in response to various stresses, but its function remains unclear. The hypothesis that GABA accumulation in leaf tissue may function as a plant resistance mechanism against phytophagous insect activity was investigated. GABA accumulation in response to mechanical stimulation, mechanical damage and insect activity was demonstrated. In wt tobacco (Nicotiana tabacum cv Samsun), mechanical stimulation or damage caused GABA to accumulate within 2 min from mean levels of 14 to 37 and 1~9 nmol g-l fresh weight (FW), respectively. In the transgenic tobacco strain CaMVGAD27c overexpressing Petunia GAD, the same treatments caused GABA to accumulate from 12 to 59 and 279 nmol g-l FW, respectively. In the transgenic tobacco strain CaMVGADilC 11 overexpressing Petunia GAD lacking an autoinhibitory domain, mechanical stimulation or damage caused GABA to accumulate from 180 to 309 and 630 nmol g-l FW, respectively. Ambulatory activity by tobacco budworm (TBW) larvae (Heliothis virescens) on leaves of CaMVGAD27c tobacco caused GABA to accumulate from 28 to 80 nmol g-l FW within 5 min. Ambulatory and leaf-rolling activity by oblique banded leaf roller (OBLR) larvae (Choristoneura rosaceana cv Harris) on wt soybean leaves (Glycine max cv Harovinton) caused GABA to accumulate from 60 to 1123 nmol g-l FW within 20 min. Increased GABA levels in leaf tissue were shown to affect phytophagous preference in TBW larvae presented with wt and transgenic tobacco leaves. When presented with leaves of Samsun wt and CaMVGAD27c plants, TBW larvae consumed more wt leaf tissue (640 ± 501 S.D. mm2 ) than transgenic leaf tissue (278 ± 338 S.D. mm2 ) nine times out of ten. When presented with leaves of Samsun wt and CaMVGAD~C11 plants, TBW larvae consumed more transgenic leaf tissue (1219 ± 1009 S.D. mm2 ) than wt leaf tissue (28 ± 31 S.D. mm2 ) ten times out of ten. These results indicate that: (1) ambulatory activity of insect larvae on leaves results in increased GABA levels, (2) transgenic tobacco leaves with increased capacity for GABA synthesis deter feeding, and (3) transgenic tobacco leaves with constitutively higher GABA levels stimulate feeding.

Stelco records, 1951-1989

The Steel Company of Canada (Stelco) was formed in 1910 with the incorporation of the Canada Screw Co. Ltd., the Montreal Rolling Mills Co., the Dominion Wire Manufacturing Co. Ltd., the Hamilton Steel and Iron Co. Ltd., and the Canada Bolt and Nut Co. Ltd. By the 1920s, the company was the largest producer of steel ingots in Canada. The 1930s saw continued success and expansion of the company as Stelco increased its iron and steel capacity by 50 percent. The company continued to prosper throughout the next several decades, with sales revenues exceeding one billion dollars in 1974. In 1980, the company officially changed its name to Stelco, in order to simplify its name in both the French and English language. The company began to experience financial difficulties beginning with the recession in 1982. The troubles persisted for the next 25 years as a result of a decreased demand for steel, labour disputes, and high steel imports. In 2004, Stelco entered bankruptcy protection. By 2007, Stelco had lost $240 million in its first four quarters after emerging from bankruptcy protection. That same year Stelco was purchased by the United States Steel Corp. Despite efforts to restructure the company, bankruptcy was again declared in 2014.

American Falls, U.S.A.

The description of the image is "(4) Majestic Niagara, rolling in ceaseless roar - American Falls from below - U.S.A.". The reverse of the image reads "Majestically Grand - the Falls, from the "Maid of the Mist," Niagara, U.S.A."

Rapids Above the Falls Looking at Goat Island, Niagara, U.S.A.

The description reads "(14) The rolling, tumbling "Rapids" above the Falls - along Riverside Drive, looking toward Goat Island, - Niagara, U.S.A.".

Letter to S.D. Woodruff from Fred Holmes

Letter to S.D. Woodruff from Fred Holmes regarding the completion of the grading, levelling and rolling in the village of Port Robinson, Nov. 10, 1856.