Stability and properties of cellulose-sodium hydroxide solution systems

Since cellulose is a linear macromolecule it can be used as a material for regenerated cellulose fiber products e.g. in textile fibers or film manufacturing. Cellulose is not thermoformable, thus the manufacturing of these regenerated fibers is mainly possible through dissolution processes preceding the regeneration process. However, the dissolution of cellulose in common solvents is hindered due to inter- and intra-molecular hydrogen bonds in the cellulose chains, and relatively high crystallinity. Interestingly at subzero temperatures relatively dilute sodium hydroxide solutions can be used to dissolve cellulose to a certain extent. The objective of this work was to investigate the possible factors that govern the solubility of cellulose in aqueous NaOH and the solution stability. Cellulose-NaOH solutions have the tendency to form a gel over time and at elevated temperature, which creates challenges for further processing. The main target of this work was to achieve high solubility of cellulose in aqueous NaOH without excessively compromising the solution stability. In the literature survey an overview of the cellulose dissolution is given and possible factors contributing to the solubility and solution properties of cellulose in aqueous NaOH are reviewed. Furthermore, the concept of solution rheology is discussed. In the experimental part the focus was on the characterization of the used materials and properties of the prepared solutions mainly concentrating on cellulose solubility and solution stability.

Essential oil of Lippia alba and its main constituent citral block the excitability of rat sciatic nerves

Lippia alba is empirically used for infusions, teas, macerates, and hydroalcoholic extracts because of its antispasmodic, analgesic, sedative, and anxiolytic effects. Citral is a mixture of trans-geranial and cis-neral and is the main constituent of L. alba essential oil and possesses analgesic, anxiolytic, anticonvulsant, and sedative effects. The present study evaluated the effects of the essential oil of L. alba (EOLa) and citral on compound action potentials (CAPs) in Wistar rat sciatic nerves. Both drugs inhibited CAP in a concentration-dependent manner. The calculated half-maximal inhibitory concentrations (IC50) of peak-to-peak amplitude were 53.2 µg/mL and 35.00 µg/mL (or 230 µM) for EOLa and citral, respectively. Peak-to-peak amplitude of the CAP was significantly reduced by 30 µg/mL EOLa and 10 µg/mL citral. EOLa and citral (at 60 and 30 µg/mL, values close to their respective IC50 for CAP blockade) significantly increased chronaxy and rheobase. The conduction velocity of the first and second CAP components was statistically reduced to ∼86% of control with 10 µg/mL EOLa and ∼90% of control with 3 µg/mL citral. This study showed that EOLa inhibited nerve excitability and this effect can be explained by the presence of citral in its composition. Both EOLa and citral showed inhibitory actions at lower concentrations compared with other essential oils and constituents with local anesthetic activity. In conclusion, these data demonstrate that EOLa and citral are promising agents in the development of new drugs with local anesthetic activity.

NEW BUSINESS MODELS – Sustainability as a main focus

A business model is a structure frame of an organization that can bring significant benefits and competitive advantage when structured properly. The aim of this paper was to observe and describe development of business models’ and identify factors and elements of a business model that are in a key role from the perspective of an organizational sustainability. One is striving to bring out in this thesis how should truly sustainable business model look like and what are main characteristics of it. Additionally, some recommendations that could be helpful in order to build sustainable and balanced business model in a company are presented in this work. The meaning was to make theoretical and in some extent practical acquaintance with such new business models as open business model and sustainable business model. Long-term sustainability achievement in a company was in a centric role and used as a main criteria when constructing sustainable business model structure. The main research question in this study aims to answer: What a firm should consider in order to develop profitable and sustainable business model? This study is qualitative in nature and it was conducted using content analyze as a main method of this research. The perspective of the target data in this study is an outlook of its producers of how sustainability is reached in an organization throw business model and which practices are important and has to be taken into account. The material was gathered mainly from secondary sources and the theoretical framework was outright built based on secondary data. The secondary data that have been mostly dissertations, academic writings, cases, academic journals and academic books have been analyzed from the point of view of sustainability perspective. As a result it became evident that a structure of a business model and its implementation along with a strategy is often what leads companies to success. However, for the most part, overall business environment decides and delimits how the most optimal business model should be constructed in order to be effective and sustainable. The evaluation of key factors and elements in business model leading organization to sustainability should be examined throw triple bottom line perspective, where key dimensions are environmental, social and economic. It was concluded that dimensions should be evaluated as equal in order to attain total long lasting sustainability, contradicting traditional perspective in business where profit production is seen as only main goal of a business.

Model-based testing of software systems : functionality and performance

Software is a key component in many of our devices and products that we use every day. Most customers demand not only that their devices should function as expected but also that the software should be of high quality, reliable, fault tolerant, efficient, etc. In short, it is not enough that a calculator gives the correct result of a calculation, we want the result instantly, in the right form, with minimal use of battery, etc. One of the key aspects for succeeding in today's industry is delivering high quality. In most software development projects, high-quality software is achieved by rigorous testing and good quality assurance practices. However, today, customers are asking for these high quality software products at an ever-increasing pace. This leaves the companies with less time for development. Software testing is an expensive activity, because it requires much manual work. Testing, debugging, and verification are estimated to consume 50 to 75 per cent of the total development cost of complex software projects. Further, the most expensive software defects are those which have to be fixed after the product is released. One of the main challenges in software development is reducing the associated cost and time of software testing without sacrificing the quality of the developed software. It is often not enough to only demonstrate that a piece of software is functioning correctly. Usually, many other aspects of the software, such as performance, security, scalability, usability, etc., need also to be verified. Testing these aspects of the software is traditionally referred to as nonfunctional testing. One of the major challenges with non-functional testing is that it is usually carried out at the end of the software development process when most of the functionality is implemented. This is due to the fact that non-functional aspects, such as performance or security, apply to the software as a whole. In this thesis, we study the use of model-based testing. We present approaches to automatically generate tests from behavioral models for solving some of these challenges. We show that model-based testing is not only applicable to functional testing but also to non-functional testing. In its simplest form, performance testing is performed by executing multiple test sequences at once while observing the software in terms of responsiveness and stability, rather than the output. The main contribution of the thesis is a coherent model-based testing approach for testing functional and performance related issues in software systems. We show how we go from system models, expressed in the Unified Modeling Language, to test cases and back to models again. The system requirements are traced throughout the entire testing process. Requirements traceability facilitates finding faults in the design and implementation of the software. In the research field of model-based testing, many new proposed approaches suffer from poor or the lack of tool support. Therefore, the second contribution of this thesis is proper tool support for the proposed approach that is integrated with leading industry tools. We o er independent tools, tools that are integrated with other industry leading tools, and complete tool-chains when necessary. Many model-based testing approaches proposed by the research community suffer from poor empirical validation in an industrial context. In order to demonstrate the applicability of our proposed approach, we apply our research to several systems, including industrial ones.

Identification of main contamination points by hygiene indicator microorganisms in beef processing plants

The microbiological quality of beef and meat products is strongly influenced by the conditions of hygiene prevailing during their production and handling. Without proper hygienic control, the environment in slaughterhouses and butcher shops can act as an important source of microbiological contamination. To identify the main points of microbiological contamination in the beef processing chain, 443 samples of equipment, installations and products were collected from 11 establishments (1 slaughterhouse and 10 butcher shops) located in the state of Paraná, Brazil. The microbiological quality of all the samples was evaluated using Petri dishes to obtain counts of mesophilic aerobes (AC), total coliforms, Escherichia coli (EC), yeasts and molds (YM). The main contamination points identified in butcher shops, in decreasing order, were stainless steel boxes, beef tenderizers, grinders, knives, mixers, sausage stuffers, plastic boxes, floors and drains. In the slaughterhouse, these points were sausage stuffers, platforms, floors and drains. The most severely contaminated products were fresh sausages and ground beef. This information about the main points of microbiological contamination in the beef processing chain is expected to aid professionals responsible for hygiene in similar establishments to set up proper hygienic procedures to prevent or reduce microbiological contamination of beef and meat products.

Main food sources of carotenoids, according to the purpose and degree of processing, for beneficiaries of the 'Bolsa Família' in Brazil

The intake of carotenoids is associated with antioxidant properties and some of these substances have activity of pro-vitamin A. This study aimed to estimate the intake of carotenoids (average values) by the Brazilian population focusing on beneficiaries of the 'Bolsa Família' Program and identify the dietary sources, according to the purpose and degree of processing and the inclusion of food additives. The database used is the personal food consumption module of the Household Budget Survey of 2008-2009, conducted by the Brazilian Institute of Geography and Statistics. The content of carotenoids in foods was obtained primarily from a National data source. Food products were classified into three categories: 1) fresh and minimally processed foods; 2) processed foods (containing food additives, except for flavoring and coloring agents); and 3) highly processed foods (containing flavoring and coloring agents). Insufficient intakes were identified for the conditional cash transfer program beneficiaries (3,547.1 µg). Fresh and minimally processed foods supplied between 48.6% (for girls) and 65.7% (for male adults) of pro-vitamin carotenoids. Processed foods were sources of between 55.5% and 57.0% of lutein + zeaxanthin for elderly and between 58.0% and 67.8% of lycopene for adults. Highly processed foods contributed to less than 5.0% of total carotenoids.

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena

Toisen jäte on toisen raaka-aine – Kierrätys ja uudelleenvalmistus taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena Väitöskirjatutkimus tarkastelee kierrätystä ja uudelleenvalmistusta sekä siihen perustuvaa kierrätysliiketoimintaa taloudellisesti ja ekologisesti kestävänä liiketoimintamahdollisuutena. Tässä kestävyys tarkoittaa jätekysymysten ratkaisemista tavalla, joka mahdollistaa kestävän kehityksen periaatteiden mukaisen yhteiskunnan kehittymisen. Jätteisiin liittyvät taloudelliset ja ekolo- giset kysymykset ovat merkittävä yhteiskunnallinen haaste. Tämä luo tarpeen tutkimukselle, jonka lähtökohtana on jätekysymysten moniulotteinen tarkas- telu ja yksittäisen yrityksen toiminnan suhteuttaminen osaksi laajempaa kokonaisuutta. Tässä tutkimuksessa jätteen hyödyntämistä materiaalina lähestytään sekä empiirisesti yrityksen näkökulmasta että teoreettisesti systeemiajattelun tarjoamasta laajemmasta perspektiivistä. Tutkimuksen tavoitteena on ymmär- tää kierrätystä ja uudelleenvalmistusta liiketoimintamahdollisuutena, niiden merkitystä yrityksessä, alueella ja kierrätystaloudessa sekä näiden vuorovai- kutteista suhdetta taloudelliseen ja ekologiseen kestävyyteen nähden. Tutki- muskysymys on tärkeä, koska siihen vastaamalla syvennetään ymmärrystä yrityksissä tapahtuvan kierrätyksen ja uudelleenvalmistuksen merkityksestä kestävämmän yhteiskunnan rakentumisessa. Tutkimuksen teoriaperusta pohjautuu teollisen ekologian kirjallisuuteen ja ekoteollisen kehityksen tutkimukseen. Kierrätysliiketoiminnan kestävyyden tarkastelu rakentuu tutkimuksessa teollisen ekologian ja ekoteollisen kehityk- sen lähtökohtana olevaan win-win-ajatteluun, jonka mukaan hyvä ympäristö- suorituskyky ja hyvä taloudellinen suorituskyky voivat vahvistaa toisiaan. Kierrätysliiketoiminnan teoreettisessa tarkastelussa keskeisiä elementtejä ovat kierrätystalouden malli, teollisen ekologian alueelliset systeemit, ekoteolliset verkostot ja yrityksen rooli teollista ekologiaa soveltavana toimijana. Tutki- muksen keskeisenä kontribuutiona on yritysnäkökulman integroiminen aiem- paa vahvemmin osaksi teollisen ekologian diskursseja. Kierrätysliiketoiminnan taloudelliseen ja ekologiseen kannattavuuteen ja sen myötä kestävyyteen liittyviä kysymyksiä on lähestytty tekemällä yritys- haastatteluja ja hyödyntämällä valmista haastatteluaineistoa. Tutkimusta varten haastattelin 10 kierrätysliiketoimintaa harjoittavaa yritystä vuosina 2007 ja 2008. Tämän lisäksi tutkimuksessa on hyödynnetty Turun ammatti- korkeakoulun ja Turku Science Parkin toteuttamassa RESU-hankkeessa (Kierrätysliiketoiminta ja resurssitehokkuus Varsinais-Suomen vahvuudeksi – RESU) vuosina 2013 ja 2014 kerättyä aineistoa. Hankkeessa haastateltiin yhteensä 25 jätemateriaalia hyödyntävää ja/tai tuottavaa yritystä. Aineistojen analysointimenetelmänä on sisällönanalyysi. Analyysin tulok- sena muodostettiin yhteensä viisi pääteemaa ja 12 alateemaa. Teemat kuvaavat kierrätysliiketoimintaa aiempaa moniulotteisemmin ja näin syventävät ymmär- rystä ilmiön merkityksestä kestävämmän yhteiskunnan rakentumisessa. Teolli- sen ekologian alaan kuuluvat kvalitatiiviset tutkimukset ovat melko harvinai- sia, joten tämän väitöstutkimuksen ilmeisenä vahvuutena on laadullisen tutkimusmenetelmän hyödyntäminen. Tutkimuksen tuloksena voidaan todeta, että kierrätystalouden kehittymistä edistävä kierrätysliiketoiminta on monimuotoista ja sisältää erilaisia liiketoi- mintamahdollisuuksia sekä arvoketjuja. Paikallistuntemus ja keskeinen sijainti jätemateriaalien tuottajien suhteen on tärkeä kriteeri kierrätysliiketoiminnassa, mutta jätemateriaaleja myös kuljetetaan pitkiä matkoja. Paikallisia tai alueelli- sia jätevirtoja hyödyntävä kierrätysliiketoiminta voi tukea alueellista kestä- vyyttä, mutta toisinaan myös keskitetty hyödyntäminen voi olla kestävä vaih- toehto. Yhteistyöverkostot ovat tärkeitä jätemateriaalin laadun ja saatavuuden näkökulmasta. Tutkimus osoittaa, että kierrätysliiketoimintaa harjoittavat yritykset ovat samalla sekä kierrätystalouden käytännön toimeenpanijoita että uuden toimintakulttuurin luojia. Tutkimuksen tulosten perusteella voidaan esittää johtopäätös, että kierrä- tysliiketoiminta on taloudellisesti ja ekologisesti kannattava liiketoimintamah- dollisuus. Win-win-ratkaisut eivät kuitenkaan takaa kierrätysliiketoiminnan kestävyyttä. Kierrätysliiketoiminnan kestävyyden arvioiminen edellyttää laajaa perspektiiviä ja toiminnan vaikutusten suhteuttamista mittakaavaan, ajalliseen ulottuvuuteen, interventioon ja sosiaalisiin kysymyksiin. Teolliseen ekologiaan perustuva kierrätysliiketoiminta luo mahdollisuuksia edistää kestävyyttä, joten tällä perusteella kierrätystä ja uudelleenvalmistusta voidaan pitää kestävänä liiketoimintamahdollisuutena. Avainsanat: kierrätysliiketoiminta, kierrätys, uudelleenvalmistus, systeemiajattelu, teollinen ekologia, ekoteollinen kehitys, kierrätystalous, win-win-ajattelu, kestävyys One company's waste is another's raw material –Recycling and remanufacturing as an economically and environmentally sustainable business opportunity The thesis investigates whether product recycling and remanufacturing can serve as a business opportunity that is economically and ecologically sustaina- ble. In this effort, my idea is to contribute to solving the waste issue in a manner that makes it possible to strive toward sustainable societal develop- ment. The economic and ecological questions associated with waste flows are a significant challenge. The complexity of the issue requires a multidimen- sional approach in which the operation of an individual company is viewed in the context of the larger societal system. In this thesis waste utilization as a resource with value is considered both from an empirical perspective on the firm as well as from a more general viewpoint offered by systems analysis. The objective of the thesis is to under- stand recycling and remanufacturing as a business opportunity. The thesis considers the meaning of recycling and remanufacturing for a single company, for the region the company is located and for the recycling economy. The objective of this study is important for it enhances the understanding of the product recycling and remanufacturing processes that take place within busi- ness organizations and how these processes affect societal sustainable development. The theoretical basis arises from industrial ecology and from the literature on eco-industrial development. The business-economic win-win situation and this vision serve as the basic position from which recycling business is inves- tigated in the thesis. In the theoretical discussion, key elements are recycling economy model, regional and local industrial ecosystems, eco-industrial networks and the role of a company as an actor that applies industrial ecology in practice. The main contribution of this study lies in integrating the company perspective more strongly into the industrial ecology discourses. The recycling business has been studied by conducting interviews in companies and by secondary analysis of an existing interview material. During 2007 and 2008 I made 10 interviews in companies that are active in recycling business. In addition, I used interview material gathered for the project “Recycling business and resource efficiency as the strength of Southwest Finland” (RESU) by Turku University of Applied Sciences and Turku Science Park during the period 2013–2014. This data covers altogether 25 businesses that either utilize and/or produce waste materials. The data has been analyzed using the content analysis method. This process led to the development of 5 main themes and 12 sub-themes. These themes describe the recycling business multi-dimensionally and thus understanding of the phenomenon and its role in building a sustainable society are substantially deepened in this research. In the field of industrial ecology qualitative studies are relatively rare and therefore the qualitative research approach is an evident strength of the thesis. The results show that the recycling business activity supporting recycling economy has diverse dimensions including various business opportunities and diverse value chains. The results show that for waste producers it is important to know the local situational factors and to have a central geographical location. Waste materials are, however, transported over long distances as well. The study indicates that local waste flow utilization can support regional sustainability, while occasionally a more centralized utilization can be sustain- able. Collaboration networks are important to secure the quality and availabil- ity of utilizable waste materials. The thesis demonstrates that the companies practicing recycling business serve simultaneously as actors that implement recycling economy and enhance a new operation culture within the business community. The overall conclusion of the thesis argues that recycling business is a business opportunity that can support both an economically and environmen- tally viable business operation. However, win-win solutions do not secure the sustainability of recycling business. The sustainability evaluation of recycling business requires a holistic systems perspective. The actions undertaken need to be considered with changing spatial and temporal system boundaries, societal intervention and placed in the context of relevant societal issues. Industrial ecology -based recycling business creates opportunities for sustain- ability and thus recycling and remanufacturing present an opportunity for sustainable business. Keywords: Recycling business; Recycling; Remanufacturing, Systems thinking; Industrial ecology; Eco-industrial development; Recycling Economy; Win-Win thinking; Sustainability

Value creation in intelligent packaging value chains

The goal of this thesis is to look for and point out problems and bottlenecks related to value chains and networks in initiation and implementation of intelligent packaging. The research is based on interviews in different case companies and is qualitative by nature. The interview results are examined through a framework built upon relevant theory, with the aim to present a useful recommendation for a supplier company for advancing intelligent packaging business. The perspective that is attained through the research questions demonstrates the potential customer companies’ views of possibilities and problems. The key results suggest that intellectual property of relevant products is in an important position from the customers’ perspective. If the supplier does not own a product technology, a sufficiently large company can consider working as an integrator in a network where smaller companies make use of a compiled offering from other smaller actors. The foundation for these networks and company relationships is value creation, which has to be based on profound customer knowledge and research. The framework that is created for this study builds upon earlier research to provide a model that better serves intelligent packaging implementation and includes the notion of importance of value proposition and continuous value co-creation.

Developing Supply Chain Process Management and Measurement in Global Manufacturing Company

The objective of this research is to create a current state analysis of pulp supply chain processes from production planning to deliveries to customers. A cross-functional flowchart is being used to model these processes. These models help finding key performance indicators (KPIs) which enable examinations of the supply chain efficiency. Supply chain measures in different processes reveal the changes need processes that affect the whole supply chain and its efficiency and competitiveness. Structure of pulp supply chain differs from most of the other supply chains. The fact that there are big volumes of bulk products, small product variations and supply forecasts are made for the year ahead make the difference. This factor brings different benefits but also challenges when developing supply chain. This thesis divides pulp supply chain in three different main categories: production planning, warehousing and transportation. It provides tools for estimating the functionality of supply chain as well as developing the efficiency for different functions of supply chain. By having a better understanding of supply chain processes and measurement the whole supply chain structure can be developed significantly.

Evaluation of the main energy scenarios for the global energy transition

Energy scenarios are used as a tool to examine credible future states and pathways. The one who constructs a scenario defines the framework in which the possible outcomes exist. The credibility of a scenario depends on its compatibility with real world experiences, and on how well the general information of the study, methodology, and originality and processing of data are disclosed. In the thesis, selected global energy scenarios’ transparency and desirability from the society’s point of view were evaluated based on literature derived criteria. The global energy transition consists of changes to social conventions and economic development in addition to technological development. Energy solutions are economic and ethical choices due to far-reaching impacts of energy decision-making. Currently the global energy system is mostly based on fossil fuels, which is unsustainable over the long-term due to various reasons: negative climate change impacts, negative health impacts, depletion of fossil fuel reserves, resource-use conflicts with water management and food supply, loss of biodiversity, challenge to preserve ecosystems and resources for future generations, and inability of fossil fuels to provide universal access to modern energy services. Nuclear power and carbon capture and storage cannot be regarded as sustainable energy solutions due to their inherent risks and required long-term storage. The energy transition is driven by a growing energy demand, decreasing costs of renewables, modularity and scalability of renewable technologies, macroeconomic benefits of using renewables, investors’ risk awareness, renewable energy related attractive business opportunities, almost even distribution of solar and wind resources on the planet, growing awareness of the planet’s environmental status, environmental movements and tougher environmental legislation. Many of the investigated scenarios identified solar and wind power as a backbone for future energy systems. The scenarios, in which the solar and wind potentials were deployed in largest scale, met best the set out sustainability criteria. In future research, energy scenarios’ transparency can be improved by better disclosure on who has ordered the study, clarifying the funding, clearly referencing to used sources and indicating processed data, and by exploring how variations in cost assumptions and deployment of technologies influence on the outcomes of the study.

Catalogue Of the main groups of Ephemera Collection

The Ephemera Collection has been organised in groups based on the topic. The collection also includes groups formed on the basis of the publication type.