When supply travels far beyond demand: Institutional and regulatory causes of oversupply in Spain’s transport infrastructure

Spain’s transport infrastructure policy has become a paradigmatic case of oversupply and of mismatch with demand. The massive expansion of the country’s transport infrastructure over the last decade has not been a response to demand bottlenecks or previously identified needs. For this reason, the intensity of use today on all interurban modes of transport in Spain falls well below that of other EU countries. This paper analyzes the institutional and regulatory factors that have permitted this policy, allowing us to draw lessons from the Spanish case that should help other countries avoid the pitfalls and shortcomings of Spanish policy. Based on our analysis, we also discuss policy remedies and suggest reforms in different regulatory areas, which could help improve the performance of Spain’s infrastructure policy.

Privatization and PPPS in transportation infrastructure: Network effects of increasing user fees

PPPS: Problem: Public-private-partnerships in transport infrastructure characteristically increase user-fees. Purpose: We aim to identify the network effects of the use of PPPs and increased user tolls in road infrastructure. Methods: We study the increases in user tolls on motorways due to the use of PPPs in the US. Results and conclusions: Among other things, the monetization of motorways is associated with an increase in toll levels that has consequences for their users, and also for the rest of the sections of the network.

Clean development mechanism and joint implementation in China and Russia as related to industrial energy projects

Being highly discussed the problem of climate change and global warming has been keeping importance for several of decades. As a response to the world’s need in solution for climate change disasters, the United Nations Framework Convention on Climate Change was adopted in 1992 and supplemented with the Kyoto protocol in 1997. This work is aimed to give better understanding of the Convention, Kyoto Protocol with its mechanisms and their function, related to energy projects in such case countries, as Russia and China, in order to assist evaluation of projects cost-effectiveness. It provides basic information about the Convention and the Protocol with their regulations, overview of present situation and future post-Kyoto forecasts, while the most attention is concentrated on the clean development mechanism and joint implementation step-by-step project cycles and specific regulations in given countries. The current study disclosed that CDM and JI project cycles are resulting in a complicated process. By the moment it requires step-by-step following of a number of methodologies, spending time and finance to particular project development. Uncertainties about post-Kyoto period bring additional risk to the projects and complicate any business decision concerning Kyoto Protocol.

Infrastructure and nation building: The regulation and financing of network transportation infrastructures in Spain (1720-2010)

This paper analyzes Spanish infrastructure policy since the early 1700s: Road building in the eighteenth century, railway creation and expansion in the nineteenth, motorway expansion in the twentieth, and high speed rail development in the twenty-first. The analysis reveals a long-term pattern, in which infrastructure policy in Spain has been driven not by the requirements of commerce and economic activity, but rather by the desire to centralize transportation around the country’s political capital.

CERN-MEDICIS: une nouvelle infrastructure pour la production de radioisotopes a usage medical [CERN-MEDICIS (Medical Isotopes Collected from ISOLDE): a new facility].

CERN-MEDICIS (Medical Isotopes Collected from ISOLDE) est une plateforme de recherche destinée à la production de radioisotopes biomédicaux. Inauguré en 2014, il produira progressivement un nombre croissant de radioisotopes grâce au faisceau de protons ISOLDE déjà existant. Ce projet réunit des spécialistes du cancer, des chirurgiens, des experts en médecine nucléaire, en radiochimie et radiopharmacie et les scientifiques du CERN. Les radioisotopes ainsi produits seront destinés à la recherche fondamentale contre le cancer, à des études précliniques ainsi qu'au développement de protocoles d'imagerie et de thérapie destinés aux patients.Le CERN, les HUG, le CHUV, l'ISREC et l'EPFL qui soutiennent ce projet seront les premiers bénéficiaires de ces radioisotopes novateurs dont la distribution sera ensuite étendue à d'autres centres européens. CERN-MEDICIS is a facility dedicated to research and development in life science and medical applications. The research platform was inaugurated in October 2014 and will produce an increasing range of innovative isotopes using the proton beam of ISOLDE for fundamental studies in cancer research, for new imaging and therapy protocols in cell and animal models and for preclinical trials, possibly extended to specific early phase clinical studies (phase 0) up to phase I trials. CERN, the University Hospital of Geneva (HUG), the University Hospital of Lausanne (CHUV), the Swiss Institute for Experimental Cancer (ISREC) at Swiss Federal Institutes of Technology (EPFL) that currently support the project will benefit of the initial production that will then be extended to other centers.

The use of mini-projects in an undergraduate laboratory course in chemistry

This paper reports the results of a three-year study of the effectiveness of mini-projects in a first year laboratory course in chemistry at a Scottish university. A mini-project is a short, practical problem which requires for its solution the application of the knowledge and skills developed in previously completed set experiments. A number of recommendations have been made about the most appropriate ways of introducing mini-projects into undergraduate laboratory course. The main hypothesis of this survey was concerned with the value of mini-projects in laboratory courses formulated within the context of Information Processing Theory.

Technology roadmap for new sales support and management system for crane manufacturing company

Sales configurators are essential tools for companies that offer complicated case specifically crafted products for customers. Most sophisticated of them are able to design an entire end product on the fly according to given constraints, calculate price for the offer and move the order into production. This thesis covers a sales configurator acquisition project in a large industrial company that offers cranes for its customers. The study spans the preliminary stages of a large-scale software purchase project starting from the specification of problem domain and ending up presenting the most viable software solution that fulfils the requirements for the new system. The project consists of mapping usage environment, use cases, and collecting requirements that are expected from the new system. The collected requirements involve fitting the new sales system into enterprise application infrastructure, mitigating the risks involved in the project and specifying new features to the application whilst preserving all of the admired features of the old sales system currently used in the company. The collected requirements were presented to a number of different sales software vendors who were asked to provide solution suggestions that would fulfil all the demands. All of the received solution proposals were exposed to an evaluation to determine the most feasible solutions, and the construction of evaluation criteria itself was a part of the study. The final outcome of this study is a short-list of the most feasible sales configurator solutions together with a description of how software purchase process in large enterprises work, and which aspects should be paid attention in large projects of similar kind.

Introducing Continuous Integration for C and C++ Software Development Projects on Linux Platform

Software integration is a stage in a software development process to assemble separate components to produce a single product. It is important to manage the risks involved and being able to integrate smoothly, because software cannot be released without integrating it first. Furthermore, it has been shown that the integration and testing phase can make up 40 % of the overall project costs. These issues can be mitigated by using a software engineering practice called continuous integration. This thesis work presents how continuous integration is introduced to the author's employer organisation. This includes studying how the continuous integration process works and creating the technical basis to start using the process on future projects. The implemented system supports software written in C and C++ programming languages on Linux platform, but the general concepts can be applied to any programming language and platform by selecting the appropriate tools. The results demonstrate in detail what issues need to be solved when the process is acquired in a corporate environment. Additionally, they provide an implementation and process description suitable to the organisation. The results show that continuous integration can reduce the risks involved in a software process and increase the quality of the product as well.

Laboratory projects using inquiry-based learning: an application to a practical inorganic course

This paper reports how laboratory projects (LP) coupled to inquiry-based learning (IBL) were implemented in a practical inorganic chemistry course. Several coordination compounds have been successfully synthesised by students according to the proposed topics by the LP-IBL junction, and the chemistry of a number of metals has been studied. Qualitative data were collected from written reports, oral presentations, lab-notebook reviews and personal discussions with the students through an experimental course with undergraduate second-year students at the Universidad Nacional de Colombia during the last 5 years. Positive skills production was observed by combining LP and IBL. Conceptual, practical, interpretational, constructional (questions, explanations, hypotheses), communicational, environmental and application abilities were revealed by the students throughout the experimental course.

Doenças tropicais negligenciadas: uma nova era de desafios e oportunidades

In an article recently published in Química Nova, entitled "Chemistry Without Borders" ("Química Sem Fronteiras") [Pinto, A. C.; Zucco, C.; Galembeck, F.; Andrade, J. B.; Vieira, P. C. Quim. Nova 2012, 35, 2092], the authors highlighted the important aspects of science and technology with special emphasis on the field of Chemistry and its contributions toward a more prosperous Brazil of future. As a second step in that direction, this article extends the discussion of a key issue for the country in the framework of the chemistry community through the so called position papers in strategic areas. This document is a part of the contribution of the Brazilian Chemical Society to the World Science Forum to be held in Rio de Janeiro in November 2013. In this context, the present paper provides a brief discussion on neglected tropical diseases (NTDs) with emphasis on the current challenges and opportunities towards the development and evolution of the field. NTDs leads to illness, long-term disability or death, and has severe social, economic and psychological consequences for millions of men, women, and children worldwide. In most cases, the available treatments are inadequate and extremely limited in terms of efficacy and safety, leading to an urgent demand for new drugs. In addition to the traditional challenges involved in any drug discovery process, it is widely recognized that there is an innovation gap and a lack of investment for research and development (R&D) in the area of NTDs. In the last few decades, methods toward combating, eradication, prevention, and treatment of NTDs have been repeatedly emphasized in the major international agendas. Developments in these strategies and alliances have continued to have an essential impact, particularly in the area of drug discovery, both in Brazil and globally and should be encouraged and supported. Several examples of international activities dedicated to the reduction of the devastating global impact of NTDs can be provided. Despite the beneficial developments in the past 30 years, NTDs continue to devastate poor communities in remote and vulnerable areas, in large part, due to market failures and public policies. Recent studies have shown that among 756 new drugs approved between 2000 and 2011, only four new chemical entities (NCEs) were identified for the treatment of malaria, while none were developed against NTDs or tuberculosis. Furthermore, only 1.4% of approximately 150,000 clinical trials were registered for neglected diseases, with a smaller number of trials for NCEs. Establishment and strengthening of global strategies involving the triad "government-academia-industry" is fundamental to the success in R&D of new drugs for NTDs. National and international public-private initiatives that aim to create, encourage, and invest in R&D projects have been implemented and therefore are of utmost importance to successfully integrate Brazil into this new paradigm. It is essential to lay the foundation for mechanisms that will intensify investments in infrastructure, training, and qualification of personnel with an ultimate strategic vision that foresees continuity. Our research group has made significant contributions to the development of this field with the goal of forging new frontiers while tackling both current and future challenges that include indispensable elements such as innovation and integration.

Project owner’s and outside engineering consultant’s role in power plant implementation projects

The purpose of this study was to investigate the nature of co-operation between a project owner and an outside engineering consultant in combined heat and power plant implementation projects. Moreover, as another focal subject of the study was to familiarize the purchasing behavior of the energy producer and how an outside engineering consultant participated into different stages of the purchasing process. The study was carried out as a multiple case study including altogether six Finnish power plant implementation projects that had been taken into commercial use during 1995 – 2015. By adjusting the findings of empirical interview data and comparing those to the theoretical framework concerning, among others, Finnish energy production, engineering consulting businesses, delivery methods of construction project and finally the purchasing process, it can be concluded that especially in the power plant implementation projects in the past have a great influence to decisions made during the project. The role of the main engineering consultant is to act as an assistant, who helps to achieve the project goals successfully rather than an advisor who only knows how the project should be conducted. At least in these five project cases this was the case, meaning that the final decision power always remaining with project owner.

Evaluating the success of software development projects in Russia, Ukraine, and Belarus

The size and complexity of projects in the software development are growing very fast. At the same time, the proportion of successful projects is still quite low according to the previous research. Although almost every project's team knows main areas of responsibility which would help to finish project on time and on budget, this knowledge is rarely used in practice. So it is important to evaluate the success of existing software development projects and to suggest a method for evaluating success chances which can be used in the software development projects. The main aim of this study is to evaluate the success of projects in the selected geographical region (Russia-Ukraine-Belarus). The second aim is to compare existing models of success prediction and to determine their strengths and weaknesses. Research was done as an empirical study. A survey with structured forms and theme-based interviews were used as the data collection methods. The information gathering was done in two stages. At the first stage, project manager or someone with similar responsibilities answered the questions over Internet. At the second stage, the participant was interviewed; his or her answers were discussed and refined. It made possible to get accurate information about each project and to avoid errors. It was found out that there are many problems in the software development projects. These problems are widely known and were discussed in literature many times. The research showed that most of the projects have problems with schedule, requirements, architecture, quality, and budget. Comparison of two models of success prediction presented that The Standish Group overestimates problems in project. At the same time, McConnell's model can help to identify problems in time and avoid troubles in future. A framework for evaluating success chances in distributed projects was suggested. The framework is similar to The Standish Group model but it was customized for distributed projects.

Coaching agile methods in research and development projects

Agile coaching of a project team is one way to aid learning of the agile methods. The objective of this thesis is to present the agile coaching plan and to follow how complying the plan affects to the project teams. Furthermore, the agile methods are followed how they work in the projects. Two projects are used to help the research. From the thesis point of view, the task for the first project is to coach the project team and two new coaches. The task for the second project is also to coach the project team, but this time so that one of the new coaches acts as the coach. The agile methods Scrum process and Extreme programming are utilized by the projects. In the latter, the test driven development, continuous integration and pair programming are concentrated more precisely. The results of the work are based on the observations from the projects and the analysis derived from the observations. The results are divided to the effects of the coaching and to functionality of the agile methods in the projects. Because of the small sample set, the results are directional. The presented plan, to coach the agile methods, needs developing, but the results of the functionality of the agile methods are encouraging.

Future vision of information networks according to EU 7th framework

The purpose of this thesis is to investigate projects funded in European 7th framework Information and Communication Technology- work programme. The research has been limited to issue ”Pervasive and trusted network and service infrastructure” and the aim is to find out which are the most important topics into which research will concentrate in the future. The thesis will provide important information for the Department of Information Technology in Lappeenranta University of Technology. First in this thesis will be investigated what are the requirements for the projects which were funded in “Pervasive and trusted network and service infrastructure” – programme 2007. Second the projects funded according to “Pervasive and trusted network and service infrastructure”-programme will be listed in to tables and the most important keywords will be gathered. Finally according to the keyword appearances the vision of the most important future topics will be defined. According to keyword-analysis the wireless networks are in important role in the future and core networks will be implemented with fiber technology to ensure fast data transfer. Software development favors Service Oriented Architecture (SOA) and open source solutions. The interoperability and ensuring the privacy are in key role in the future. 3D in all forms and content delivery are important topics as well. When all the projects were compared, the most important issue was discovered to be SOA which leads the way to cloud computing.