Papit ja propaganda

Kirjallisuusarvostelu

Potential of energy and nutrient recovery from biodegradable waste by co-treatment in Lithuania

Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.

Optimal Recycling Combination of Ash in South-East Finland

The present world energy production is heavily relying on the combustion of solid fuels like coals, peat, biomass, municipal solid waste, whereas the share of renewable fuels is anticipated to increase in the future to mitigate climate change. In Finland, peat and wood are widely used for energy production. In any case, the combustion of solid fuels results in generation of several types of thermal conversion residues, such as bottom ash, fly ash, and boiler slag. The predominant residue type is determined by the incineration technology applied, while its composition is primarily relevant to the composition of fuels combusted. An extensive research has been conducted on technical suitability of ash for multiple recycling methods. Most of attention was drawn to the recycling of the coal combustion residues, as coal is the primary solid fuel consumed globally. The recycling methods of coal residues include utilization in a cement industry, in concrete manufacturing, and mine backfilling, to name few. Biomass combustion residues were also studied to some extent with forest fertilization, road construction, and road stabilization being the predominant utilization options. Lastly, residues form municipal solid waste incineration attracted more attention recently following the growing number of waste incineration plants globally. The recycling methods of waste incineration residues are the most limited due to its hazardous nature and varying composition, and include, among others, landfill construction, road construction, mine backfilling. In the study, environmental and economic aspects of multiple recycling options of thermal conversion residues generated within a case-study area were studied. The case-study area was South-East Finland. The environmental analysis was performed using an internationally recognized methodology — life cycle assessment. Economic assessment was conducted applying a widely used methodology — cost-benefit analysis. Finally, the results of the analyses were combined to enable easier comparison of the recycling methods. The recycling methods included the use of ash in forest fertilization, road construction, road stabilization, and landfill construction. Ash landfilling was set as a baseline scenario. Quantitative data about the amounts of ash generated and its composition was obtained from companies, their environmental reports, technical reports and other previously published literature. Overall, the amount of ash in the case-study area was 101 700 t. However, the data about 58 400 t of fly ash and 35 100 t of bottom ash and boiler slag were included in the study due to lack of data about leaching of heavy metals in some cases. The recycling methods were modelled according to the scientific studies published previously. Overall, the results of the study indicated that ash utilization for fertilization and neutralization of 17 600 ha of forest was the most economically beneficial method, which resulted in the net present value increase by 58% compared to ash landfilling. Regarding the environmental impact, the use of ash in the construction of 11 km of roads was the most attractive method with decreased environmental impact of 13% compared to ash landfilling. The least preferred method was the use of ash for landfill construction since it only enabled 11% increase of net present value, while inducing additional 1% of negative impact on the environment. Therefore, a following recycling route was proposed in the study. Where possible and legally acceptable, recycle fly and bottom ash for forest fertilization, which has strictest requirements out of all studied methods. If the quality of fly ash is not suitable for forest fertilization, then it should be utilized, first, in paved road construction, second, in road stabilization. Bottom ash not suitable for forest fertilization, as well as boiler slag, should be used in landfill construction. Landfilling should only be practiced when recycling by either of the methods is not possible due to legal requirements or there is not enough demand on the market. Current demand on ash and possible changes in the future were assessed in the study. Currently, the area of forest fertilized in the case-study are is only 451 ha, whereas about 17 600 ha of forest could be fertilized with ash generated in the region. Provided that the average forest fertilizing values in Finland are higher and the area treated with fellings is about 40 000 ha, the amount of ash utilized in forest fertilization could be increased. Regarding road construction, no new projects launched by the Center of Economic Development, Transport and the Environment in the case-study area were identified. A potential application can be found in the construction of private roads. However, no centralized data about such projects is available. The use of ash in stabilization of forest roads is not expected to increased in the future with a current downwards trend in the length of forest roads built. Finally, the use of ash in landfill construction is not a promising option due to the reducing number of landfills in operation in Finland.

Corporate green image communication through public disclosures and social media

Today, companies need to mind the environment in all their actions. Policies, regulations and growing pressure from environmentally conscious public are driving corporations to invest increasingly in their green images. Communication plays a key role in forming and maintaining that image. This thesis explores how six selected companies communicate about their environmental efforts and activities, and its linkage to their green images, in annual and sustainability reports and in Facebook. The companies come from the U.S. and Europe and operate in three different industries: ICT, oil and gas, and aerospace & defense. Qualitative and quantitative content analyses are conducted to examine 36 reports and 121 Facebook messages, collected from the period of 2010-2014, and from 2005 for comparison. The results show that although the quality and quantity of environmental disclosure is increasing, there is still room for improvement. Overall, disclosure in the ICT sector is on the highest level. The European companies disclose more and on average have stronger green images than the American ones. Emissions and ways to reduce them is by far the most covered topic in both continents and in all three industry sectors. The messages in Facebook are closer to advertising, and overall the platform is utilized surprisingly little.

Finnish Maritime Personnel's Conceptions on Safety Management and Safety Culture

The purpose of this thesis is to explore Finnish maritime personnel’s conceptions of safety management and its relationship with the concept of safety culture. In addition, the aim is to evaluate the impact of the ISM Code on the prevailing safety culture in the Finnish shipping business. A total of 94 interviewees and seven Finnish shipping companies were involved in this study. Thematic interviews were applied as the main research method for the study. The results were analysed qualitatively. The results indicate that maritime safety culture can simultaneously demonstrate features of integration, differentiation and ambiguity. Basically, maritime personnel have a positive attitude towards safety management systems since they consider safety management beneficial and essential in general. However, the study also found considerable criticism among the interviewees. The interviewed maritime personnel did not criticise the ISM Code as such, yet they criticised the way the ISM Code has been applied in practise. In order to understand the multiple perspectives of safety culture more comprehensively, multiple theoretical perspectives and methodological approaches are needed. This study indicates that safety culture and the impacts of the ISM Code should not be unambiguously studied solely quantitative methods or qualitative methods. By examining safety culture from several methodological and theoretical perspectives, one may gain a more versatile and holistic overview of safety culture.

Medidas de bienestar en empleados: análisis de los estudios realizados entre 2002 y 2012 desde la noción de organización saludable

Actualmente se considera que las organizaciones con resultados positivos y rendimientos crecientes tienen aspectos y características particulares que las diferencian de aquellas organizaciones que no obtienen los mejores resultados en el mercado. Para que las organizaciones sean saludables deben garantizar el bienestar del empleado y comprometerse con el mejoramiento continuo del mismo. Es así como surgen las escalas de medidas de bienestar, las cuales contribuyen directamente al bienestar del empleado y sus resultados positivos dentro de la organización. Este estudio hace referencia a las medidas de bienestar más utilizadas en un periodo de diez años (2002-2012), con el propósito de establecer la relación entre las medidas de bienestar, el bienestar de los empleados y las organizaciones saludables. Para determinar dicha relación, se llevó a cabo un análisis detallado de los estudios realizados sobre las escalas de medidas de bienestar utilizadas durante el periodo de tiempo 2002 y 2012. Los resultados arrojados señalan que las medidas de bienestar más utilizadas durante este periodo son: Satisfacción laboral, Clima organizacional, Engagement y Calidad de vida laboral, mientras que las cuatro medidas de bienestar menos utilizadas son: Remuneración y Bienestar subjetivo.

Modelo de gestión del conocimiento para una empresa del sector de insumos químicos para la industria farmacéutica, cosmética y de alimentos: caso Disaromas S.A.

La creación de conocimiento al interior de las organizaciones es visible mediante la dirección adecuada del conocimiento de los individuos, sin embargo, cada individuo debe interactuar de tal manera que forme una red o sistema de conocimiento organizacional que consolide a largo plazo las empresas en el entorno en el que se desenvuelven. Este documento revisa elementos centrales acerca de la gestión de conocimiento visto desde varios autores y perspectivas e identifica puntos clave para diseñar un modelo de gestión de conocimiento para una empresa del sector de insumos químicos para la industria farmacéutica, cosmética y de alimentos de la ciudad de Bogotá.

Las prácticas de recursos humanos y su incidencia en el bienestar laboral de los empleados

El objetivo del presente trabajo es formular, mediante una profunda revisión documental, bibliográfica y empírica, una fundamentación teórica sobre si existe o no incidencia de las prácticas de recursos humanos sobre el bienestar laboral de los empleados, y el que grado en que esta se presenta sobre aspecto como el engagement y la satisfacción laboral. Se realizó la revisión de múltiples estudios empíricos que aportaran evidencia sobre la relación que se presenta entre las principales prácticas de recursos humanos – provisión de personal, formación y desarrollo, promoción de personal, evaluación de desempeño, compensación y pago, y balance trabajo-familia – y el bienestar laboral, representado en el engagement y satisfacción en el trabajo de los empleados. Los resultados de este trabajo indican la existencia de una relación e incidencia de las prácticas de recursos humanos, el bienestar laboral, el engagement y la satisfacción laboral. De igual forma se encontró que estas relaciones son principalmente de carácter positivo, lo cual indica que las organizaciones que desarrollan este tipo de prácticas en su interior, fomentan tanto el desarrollo y la presencia de bienestar laboral en sus empleados, como su perdurabilidad.

Rendimiento de los estudiantes finlandeses en PISA: las claves del éxito en lectura.

Número extraordinario 2006, con el título: PISA. Programa para la Evaluación Internacional de Alumnos. Resumen basado en el de la publicación

Six new loci associated with body mass index highlight a neuronal influence on body weight regulation

Common variants at only two loci, FTO and MC4R, have been reproducibly associated with body mass index (BMI) in humans. To identify additional loci, we conducted meta-analysis of 15 genome-wide association studies for BMI (n > 32,000) and followed up top signals in 14 additional cohorts (n > 59,000). We strongly confirm FTO and MC4R and identify six additional loci (P < 5 x 10(-8)): TMEM18, KCTD15, GNPDA2, SH2B1, MTCH2 and NEGR1 (where a 45-kb deletion polymorphism is a candidate causal variant). Several of the likely causal genes are highly expressed or known to act in the central nervous system (CNS), emphasizing, as in rare monogenic forms of obesity, the role of the CNS in predisposition to obesity.

Convergent evolution of [D-Leucine1] microcystin-LR in taxonomically disparate cyanobacteria

Abstract Background Many important toxins and antibiotics are produced by non-ribosomal biosynthetic pathways. Microcystins are a chemically diverse family of potent peptide toxins and the end-products of a hybrid NRPS and PKS secondary metabolic pathway. They are produced by a variety of cyanobacteria and are responsible for the poisoning of humans as well as the deaths of wild and domestic animals around the world. The chemical diversity of the microcystin family is attributed to a number of genetic events that have resulted in the diversification of the pathway for microcystin assembly. Results Here, we show that independent evolutionary events affecting the substrate specificity of the microcystin biosynthetic pathway have resulted in convergence on a rare [D-Leu1] microcystin-LR chemical variant. We detected this rare microcystin variant from strains of the distantly related genera Microcystis, Nostoc, and Phormidium. Phylogenetic analysis performed using sequences of the catalytic domains within the mcy gene cluster demonstrated a clear recombination pattern in the adenylation domain phylogenetic tree. We found evidence for conversion of the gene encoding the McyA2 adenylation domain in strains of the genera Nostoc and Phormidium. However, point mutations affecting the substrate-binding sequence motifs of the McyA2 adenylation domain were associated with the change in substrate specificity in two strains of Microcystis. In addition to the main [D-Leu1] microcystin-LR variant, these two strains produced a new microcystin that was identified as [Met1] microcystin-LR. Conclusions Phylogenetic analysis demonstrated that both point mutations and gene conversion result in functional mcy gene clusters that produce the same rare [D-Leu1] variant of microcystin in strains of the genera Microcystis, Nostoc, and Phormidium. Engineering pathways to produce recombinant non-ribosomal peptides could provide new natural products or increase the activity of known compounds. Our results suggest that the replacement of entire adenylation domains could be a more successful strategy to obtain higher specificity in the modification of the non-ribosomal peptides than point mutations.

Defining new criteria for selection of cell-based intestinal models using publicly available databases

The criteria for choosing relevant cell lines among a vast panel of available intestinal-derived lines exhibiting a wide range of functional properties are still ill-defined. The objective of this study was, therefore, to establish objective criteria for choosing relevant cell lines to assess their appropriateness as tumor models as well as for drug absorption studies.

Storage as a way to grammaticalization

This paper explores the possible contribution of various types of storage to grammaticalization processes, and the description of such processes by means of Construction Grammar(s) (CxG). The grammaticalization processes of French pas and certain complex adpositions in German and Finnish serve to illustrate that storage can background the literal meaning of elements like pas, thus enabling the constructions containing them to grammaticalize. A further form of storage, the emergence of a productive template on the basis of high type frequency, may in turn stand behind their grammaticalization. Two further assumptions about language use are also exploited in the explanation of grammaticalization: the possibility of processing complex units holistically and a human urge to interpret recurring forms as signs.

The Efficacy of a Novel Microbial 6-Phytase Expressed in Aspergillus oryzae on the Performance and Phosphorus Utilization of Cold- and Warm-Water Fish: Rainbow Trout, Oncorhynchus mykiss , and Nile Tilapia, Oreochromis niloticus

The efficacy and tolerance of a novel microbial 6-phytase were investigated in rainbow trout, Oncorhynchus mykiss, and Nile tilapia, Oreochromis niloticus. Reference diets were sufficient in available phosphorus (P). The test diet limiting in available P was supplemented with phytase at 500, 1000, or 2000 phytase units/kg feed. The enzyme was effective in increasing total P apparent digestibility coefficient in relation to increasing the dose of phytase in rainbow trout and Nile tilapia. Zinc apparent digestibility improved in relation to phytase supplementation in rainbow trout. P release due to phytase supplementation ranged from 0.06 to 0.18% P/kg feed in rainbow trout and from 0.13 to 0.26% P/kg feed in Nile tilapia. A 58-d performance trial was conducted to evaluate tolerance of fish to phytase supplementation. Dietary treatments consisted of a basal diet without phytase or supplemented with 2000 and 200,000 phytase units/kg feed. Results indicate that this novel microbial 6-phytase is well tolerated by fish. Significant improvements for growth as well as feed conversion ratio were observed when the phytase was fed at 2000 phytase units/kg feed. This phytase is proven efficient in releasing P from phytate and could be added when plants are used for fish meal replacement in diets for salmonid and omnivorous fish.