Effect of dentinal surface preparation on bond strength of self-etching adhesive systems

The aim of this study was to evaluate the effects of dentin surface treatments on the tensile bond strength (TBS) of the self-etching primer Clearfil SE Bond (CSE) and the one-step self-etching One-Up Bond F (OUB). The exposed flat dentin surfaces of twenty-four sound third molars were prepared with diamond bur at high-speed, carbide bur at low-speed or wet ground with #600 grit SiC paper. The adhesive systems were applied to the dentin surfaces and light-cured according to the manufacturers' instructions. A 6-mm high composite crown was incrementally built-up and each increment was light-cured for 40 seconds. After being stored in water (37°C/24 h), the samples were serially sectioned parallel to the long axis, forming beams (n = 20) with a cross-sectional area of approximately 0.8 mm 2. The specimens were tested in a Universal Testing Machine at 0.5 mm/min. The cross-sectional area was measured and the results (MPa) were analyzed by two-way ANOVA and Tukey Test (p < 0.05). Overall, the groups treated with CSE exhibited the highest TBS for all surface treatments. Dentin surfaces prepared with carbide bur at low speed reduced TBS in the CSE group; however, OUB was not affected by surface treatments. The effect of surface abrasive methods on TBS was material-dependent.

A self-healing architecture for Web service-based applications

Web service-based application is an architectural style, where a collection of Web services communicates to each other to execute processes. With the popularity increase of developing Web service-based application and once Web services may change, in terms of functional and non-functional Quality of Service (QoS), we need mechanisms to monitor, diagnose, and repair Web services into a Web Application. This work presents a description of self-healing architecture that deals with these mechanisms. Other contributions of this paper are using the proxy server to measure Web service QoS values and to employ some strategies to recovery the effects from misbehaved Web services. © 2008 IEEE.

Effects of surface treatment, hydration and application method on the bond strength of a silorane adhesive and resin system to dentine

Objectives: To evaluate the effects of surface treatment, surface hydration (SH) and application method (AM) on the tensile bond strength of the Silorane Adhesive System (SAS) to dentine. Methods: Ninety bovine teeth were used. For the control group (n = 10), each dentine surface was treated according to the manufacturer's instructions of the SAS. The remaining teeth were randomly distributed into two groups (n = 40), according to the type of dentine surface treatment (ST) - 37% phosphoric acid or Er:YAG Laser prior to the application of the SAS. Each group was further divided into 2 subgroups (n = 20), according to the SH status: dry (D) or wet (W). Each subgroup was further divided into 2 subgroups (n = 10), according to the application method [AM: Active (AC) mode or Passive (PA) mode]. A coat of resin composite (Filtek P90) was applied on the surface. Artificial ageing was performed with a thermo-mechanical cycling machine. The specimens were sectioned into 1 mm × 1 mm × 10 mm sticks and stressed to failure using a universal testing machine. The remaining teeth in each group were used for Scanning Electron Microscopy to examine the fractured area. Data were subjected to a three-way ANOVA, Tukey's test and Dunnet's test (α = 0.05). Results: The ANOVA showed significant differences for SH and AM, but not for ST. For SH, the results of Tukey's test were (in MPa): D-14.9(±3.8)a, W-17.1(±4.3)b; and for AM: PA-14. 9(±4.2)a, AC-17.1(±3.9) b. Conclusions: Acid etching, when combined with a moist dentine surface and the use of primer agitation, improves the bond strength of the SAS to dentine. Clinical Significance: According to the results of the present in vitro study, modification of the application protocols for the silorane-based adhesive system may improve its clinical performance. © 2012 Published by Elsevier Ltd.

The effects of water molecules on the electronic and structural properties of peptide nanotubes

The self-assembly of short amino acid chains appears to be one of the most promising strategies for the fabrication of nanostructures. Their solubility in water and the possibility of chemical modification by targeting the amino or carboxyl terminus give peptide-based nanostructures several advantages over carbon nanotube nanostructures. However, because these systems are synthesized in aqueous solution, a deeper understanding is needed on the effects of water especially with respect to the electronic, structural and transport properties. In this work, the electronic properties of l-diphenylalanine nanotubes (FF-NTs) have been studied using the Self-Consistent Charge Density-Functional-based Tight-Binding method augmented with dispersion interaction. The presence of water molecules in the central hydrophilic channel and their interaction with the nanostructures are addressed. We demonstrate that the presence of water leads to significant changes in the electronic properties of these systems decreasing the band gap which can lead to an increase in the hopping probability and the conductivity. © the Owner Societies 2013.

Attitudes about inclusion by educators and physical educators: Effects of participation in an inclusive adapted physical education program

This study assessed the attitudes about the inclusion of students with disability by professionals in education and health, relative to their experience and training. We compared three groups: 20 teachers and trainees who worked in an adapted physical education program (GI); 75 professionals from the municipal education system of Rio Claro subdivided according to their experience-CGyes e CGno, respectively, with and without experience. We used the inventory adapted by Palla (2001) to assess participants' attitudes and self-concepts. Overall, individuals in the group that participated in the intervention maintained their tendency of being favorable toward inclusion. Teachers in regular school settings in the municipal school system of Rio Claro (Sao Paulo, Brazil), regardless of their experience with inclusive settings, remain mostly indecisive about the benefits of inclusion.

Effects of Light Activation, Agent Concentration, and Tooth Thickness on Dental Sensitivity After Bleaching

Examining three bleaching systems, this in vivo clinical trial evaluated the relationship among tooth sensitivity, light activation, and agent concentration, and it correlated dental sensitivity with tooth thickness.Materials and Methods: Eighty-seven volunteer patients were included. Inclusion criteria were the presence of anterior teeth without restorations as well as the absence of a previous bleaching experience and absence of non-carious cervical lesions or dental pain. Exclusion criteria included pregnancy or breastfeeding, a maximum of TF3 hypoplasia, tetracycline-fluorosis stains, malpositioned teeth, orthodontic treatment, periodontal disease, and/or analgesic/anti-inflammatory intake. Patients were randomly assigned to three bleaching groups: Group A (n=25) was treated with 15% H2O2 and nitrogenous-titanium-dioxide and was light activated (Lase Peroxide Lite, DMC, SaoCarlos, Sao Paulo, Brazil); Group B (n=27) was treated with 35% H2O2 and was light activated (Lase Peroxide Sensy, DMC); and Group C (n=35) was treated with 35% H2O2 (White Gold Office, Dentsply, 38West Clark Ave., Milford, USA) without light activation. Tooth sensitivity (TS) was self-reported by the patients using the visual analog scale (VAS) at baseline (TSO), immediately after treatment (TSI), and at seven days after treatment (TS7). In 46 patients, tooth thickness was determined by computed tomography. TSO, TSI, and TS7 were compared between the A and B groups to determine the effect of concentration and between the B and C groups to determine the effect of light using analysis of covariance. The correlation between tooth thickness and TSI was determined by Spearman Rho test (SPSS 15).Results: Eighty-seven patients were evaluated at baseline, and 61 were evaluated at seven days. Separated by groups, tooth sensitivity, expressed as VAS value at the time points TS0, TS1, and TS7, respectively, were as follows: Group A: 13.76 +/- 13.53, 24.40 +/- 25.24, and 5.94 +/- 5.5; Group B: 15.07 +/- 18.14, 42.4 +/- 31.78, and 8.68 +/- 17.99; and Group C: 10.80 +/- 14.83, 31.51 +/- 29.34, and 7.24 +/- 9.2. Group A showed significantly lower tooth sensitivity than group B at TSI (p=0.032). No differences were observed in the tooth sensitivities between groups B and C. No correlation was encountered between tooth thickness and tooth sensitivity immediately after treatment (Rho=-0.088,p=0.563). The median tooth thickness was 2.78 +/- 0.21 mm.Conclusions: Increases in the concentration of bleaching agents directly affect tooth sensitivity, and LED/laser activation and tooth thickness are not correlated with tooth sensitivity after dental bleaching.

Effects of excessive energy intake and supplementation with chromium propionate on insulin resistance parameters in nonlactating dairy cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of 6-month, multimodal exercise program on clinical and gait parameters of patients with idiopathic parkinson's disease: a pilot study

This pilot study aimed to identify the effects of a 6-month, multimodal exercise program on clinical and gait parameters in patients with Parkinson's disease. Two groups of participants were enrolled in the study: Trained Group (TG) and Control Group (CG). Individuals in the TG exercised three times a week for 24 weeks (in a multimodal exercise program), while the CG participants maintained their regular activity level. Participants in both the TG and the CG were assessed at pre- and posttest by clinical rates and the spatiotemporal parameters of self-paced walking. The two groups were not significantly different in demographic, clinical, and gait data at baseline. There were no significant differences between groups for clinical data at posttest. The purposed multimodal exercise program has found improvement in some kinematic gait parameters for the TG. Further study in the form of randomized controlled trial would be required to establish effectiveness of the intervention.

Do Students Progress if They Self-Assess? A Study in Small-Group Work

In this action research study of my classroom of 8th grade mathematics, I investigated the effects of self-assessment on student group work. Data was collected to see how self-assessment affected small-group work, usage of precise mathematical vocabulary, and student attitudes toward mathematics. Self-assessment allowed the students to periodically evaluate their own learning and their involvement in math class. I discovered that the vast majority of students enjoy working in small-groups, and they feel they are good group members. Evidence in regard to use of precise mathematical vocabulary showed an increased awareness in the importance of its usage. Student attitudes toward mathematics remained positive and unchanged throughout the research. As a result of this research, I plan to continue use of small-group work and selfassessment. I will continue emphasis on the inclusion of precise mathematical vocabulary as well as on training on cooperative learning strategies.

Student Writing Performance: Identifying the Effects when Combining Planning and Revising Instructional Strategies

The purpose of the current study is to identify the impact of teaching students to revise their stories on writing production (Total Words Written; TWW), writing accuracy (Percent Correct Writing Sequences; %CWS), number of critical story elements included in stories, and quality of writing. Three third-grade and one fourth-grade student who were experiencing difficulties in the area of writing were involved in the study. The students were first taught to plan their stories using the evidence-based program, Self-Regulated Strategy Development (SRSD), which has frequently been implemented to teach students to plan their stories. Students were then taught to revise their stories using SRSD procedures modified for instruction in revision strategies. Student progress was evaluated through a multiple-probe design across tasks and a multiple-probe design across participants, which allowed for experimental control over time and across story probes. In addition to the previously mentioned variables, student’s acceptability of the intervention and their attitudes toward writing were also assessed. Results indicated that instruction in revising increased student writing accuracy beyond the effects of instruction in planning. Additionally, although instruction in planning was shown to increase writing production, number of critical story elements, and quality of writing, instruction in revising produced additional improvement in these variables as well. Finally, results indicated that students liked the intervention and their attitudes toward writing generally increased. Implications for practice and future research directions will be discussed. Advisor: Merilee McCurdy

Xenia Effects on Quality of Maize Female Inbred in Production of Hybrid Seeds

In Maize (Zea maize L.), cost of hybrid seed production is directly related to the yield and quality of seed obtained per hectare of female parent. It is also important to consider the effects that a male parent can exert on the development of hybrid seed in the female parent. This effect is known as xenia. The objectives of this study were to evaluate xenia effects on 1) yield as 80K units, 2) germination of the hybrid seed and 3) susceptibility of the hybrid seed to mechanical damage. One female inbred and four male inbred lines were selected from a parent list of hybrids. The experiment was designed to allow individual cross pollination between each male inbred and the female inbred line. For use as a control, the female inbred was allowed to self pollinate. Experiments were conducted in Illinois and Iowa during 2008 and 2009 and in Nebraska during 2009. A significant inbred effect was detected on yield as 80k (α=0.001). The selfed female and pollination with male inbred B resulted in lower yields of hybrid seed. For germination, a significant inbred effect was detected (α=0.001), but was due to lower germination percentage of seed produced on the selfed female. All hybrid combinations resulted in higher germination percentages with no significant differences among hybrids. The inbred x mechanical damage interaction was significant (P=0.04) for effects on cold saturated soil germination tests. Use of inbred B resulted in a two-percentage-point reduction in cold germination when treated with the impact simulator. In a maize seed company, the production research group provides yield estimates for production of new hybrid combinations. Results from this study indicate that using only the female inbred yield may provide inaccurate estimates. Therefore to improve yield estimation, experiments should be designed to include male inbreds. Male inbreds can also impart a negative effect to the hybrid seed on tolerance to mechanical damage, thus lowering quality and increasing seed discard. When testing for hybrid seed germination, there is no need to consider distinct hybrid combinations. Female inbreds can be grown in open-pollinated fields to avoid loss of vigor observed with selfing. Advisor: George Graef

Effects of repetitive transcranial magnetic stimulation on clinical, social, and cognitive performance in postpartum depression

Background: This randomized, placebo-controlled, double-blind pilot study evaluated the impact of repetitive transcranial magnetic stimulation (rTMS) on clinical, cognitive, and social performance in women suffering with postpartum depression. Methods: Fourteen patients were randomized to receive 20 sessions of sham rTMS or active 5 Hz rTMS over the left dorsolateral prefrontal cortex. Psychiatric clinical scales and a neuropsychological battery were applied at baseline (pretreatment), week 4 (end of treatment), and week 6 (follow-up, posttreatment week 2). Results: The active rTMS group showed significant improvement 2 weeks after the end of rTMS treatment (week 6) in Hamilton Depression Rating Scale (P = 0.020), Global Assessment Scale (P = 0.037), Clinical Global Impression (P = 0.047), and Social Adjustment Scale-Self Report-Work at Home (P = 0.020). Conclusion: This study suggests that rTMS has the potential to improve the clinical condition in postpartum depression, while producing marginal gains in social and cognitive function.

Oxytocin interference in the effects induced by inhalation of 7.5% CO2 in healthy volunteers

Objective The objective of this study was to assess the acute effect of intranasally administered oxytocin (OT) on subjective states, cardiovascular, and endocrine parameters in healthy volunteers who inhaled 7.5% CO2. Methods Forty-five subjects were allocated into three matched groups of subjects who received 24?international units (IU) of OT, 2?mg of lorazepam (LZP), or placebo (PL). The challenge consisted of medical air inhalation for 20?min, 10?min of rest, and CO2 7.5% inhalation for 20?min. Subjective effects were evaluated by self-assessment scales; heart rate, blood pressure, skin conductance, and salivary cortisol were also measured. Assessments were performed at four time points: (i) baseline (-15?min); (ii) post-air inhalation (90?min); (iii) post-CO2 inhalation (120?min), and (iv) post-test (160?min). Results CO2 inhalation significantly increased the anxiety score in the PL group compared with the post-air measurement but not in the OT or LZP groups. The LZP reduced anxiety after medical air inhalation. Other parameters evaluated were not affected by OT. Conclusion OT, as well as LZP, prevented CO2-induced anxiety, suggesting that this hormone has anxiolytic properties. Copyright (C) 2012 John Wiley & Sons, Ltd.

Effects of a combined aerobic and strength training program in youth patients with acute lymphoblastic leukemia

Cure rates of youth with Acute Lymphoblastic Leukemia (ALL) have increased in the past decades, but survivor's quality of life and physical fitness has become a growing concern. Although previous reports showed that resistance training is feasible and effective, we hypothesized that a more intense exercise program would also be feasible, but more beneficial than low- to moderate-intensity training programs. We aimed to examine the effects of an exercise program combining high-intensity resistance exercises and moderate-intensity aerobic exercises in young patients undergoing treatment for ALL. A quasi-experimental study was conducted. The patients (n = 6; 5-16 years of age) underwent a 12-week intra-hospital training program involving high-intensity strength exercises and aerobic exercise at 70% of the peak oxygen consumption. At baseline and after 12 weeks, we assessed sub-maximal strength (10 repetition-maximum), quality of life and possible adverse effects. A significant improvement was observed in the sub maximal strength for bench press (71%), lat pull down (50%), leg press (73%) and leg extension (64%) as a result of the training (p < 0.01). The parents' evaluations of their children's quality of life revealed an improvement in fatigue and general quality of life, but the children's self-reported quality of life was not changed. No adverse effects occurred. A 12-week in-hospital training program including high-intensity resistance exercises promotes marked strength improvements in patients during the maintenance phase of the treatment for Acute Lymphoblastic Leukemia without side-effects. Parents' evaluations of their children revealed an improvement in the quality of life.

CdSe/CdTe interface band gaps and band offsets calculated using spin-orbit and self-energy corrections

We performed ab initio calculations of the electronic structures of bulk CdSe and CdTe, and their interface band alignments on the CdSe in-plane lattice parameters. For this, we employed the LDA-1/2 self-energy correction scheme [L.G. Ferreira, M. Marques, L.K. Teles, Phys. Rev. B 78 (2008) 125116] to obtain corrected band gaps and band offsets. Our calculations include the spin-orbit effects for the bulk cases, which have shown to be of importance for the equilibrium systems and are possibly degraded in these strained semiconductors. Therefore, the SO showed reduced importance for the band alignment of this particular system. Moreover, the electronic structure calculated along the transition region across the CdSe/CdTe interface shows an interesting non-monotonic variation of the band gap in the range 0.8-1.8 eV, which may enhance the absorption of light for corresponding frequencies at the interface between these two materials in photovoltaic applications. (C) 2012 Elsevier B.V. All rights reserved.