Otimização de vazão de poços injetores em projeto de injeção de água utilizando simulação por linhas de fluxo

Until the early 90s, the simulation of fluid flow in oil reservoir basically used the numerical technique of finite differences. Since then, there was a big development in simulation technology based on streamlines, so that nowadays it is being used in several cases and it can represent the physical mechanisms that influence the fluid flow, such as compressibility, capillarity and gravitational segregation. Streamline-based flow simulation is a tool that can help enough in waterflood project management, because it provides important information not available through traditional simulation of finite differences and shows, in a direct way, the influence between injector well and producer well. This work presents the application of a methodology published in literature for optimizing water injection projects in modeling of a Brazilian Potiguar Basin reservoir that has a large number of wells. This methodology considers changes of injection well rates over time, based on information available through streamline simulation. This methodology reduces injection rates in wells of lower efficiency and increases injection rates in more efficient wells. In the proposed model, the methodology was effective. The optimized alternatives presented higher oil recovery associated with a lower water injection volume. This shows better efficiency and, consequently, reduction in costs. Considering the wide use of the water injection in oil fields, the positive outcome of the modeling is important, because it shows a case study of increasing of oil recovery achieved simply through better distribution of water injection rates

Reestruturação produtiva na Petrobrás e ação sindical dos petroleiros do RN

Ce travail a l objectif d analyser la question de la restructuration productive dans la Petrobrás/ RN et les implications possibles sur l action syndicale du Sindipetro/RN pendant la période 1995 2003. La restructuration productive dans la Petrobrás/RN commence dans la décennie 1990 quand l entreprise, au niveau national, décide d adhérer au Programa Brasileiro de Qualidade e Produtividade PBQP lancé par le gouvernement Collor comme motivation et priorité pour que les entreprises s adaptent à l ouverture de l économie brésilienne au marché extérieur. De ce fait, la Petrobrás/RN afin de se maintenir dans le marché compétitif et mondialisé , adopte des techniques administratives basées sur la philosophie de la qualité totate, met au point des inovations technologiques et organisationnelles, tout en altérant sa base technique et adopte, encore, la tertiairisation de quelques activités visant à la reduction des coûts. De telles mesures ont atteint de façon remarquable l action du Sindipetro/RN qui commence alors à agir selon la logique de la politique néo-libérale du gouvernement de conduite anti-syndicale. Face à ces faits le syndicat a rédéfini ses actions dans le but de trouver des manières de poursuivre les luttes syndicales dans cette conjoncture de difficultés dans les relations de travail. Celui-ci s engage donc à entamer les négociations comme stratégie afin de préserver les privilèges de la catégorie et d éviter la perte des droits acquis

Reestruturação produtiva e terceirização : o caso dos trabalhadores das empresas contratadas pela Petrobrás no RN

This thesis is inserted on the discussion about the productive reframing and its reflexes concerning the world of work, in the current crisis stage in the capitalist way of production. This study deals with the impacts of outsourcing in relation to workers of companies subhired by Petrobras, in the State of Rio Grande do Norte, since decade of 1990. It is demonstrated that outsourcing in the oil sector, used mainly as a way to reduce costs of production, contributed to the raising of precarious conditions and relations of work. The transformation to the way of organization in the production, has intensified with the outsourcing, represented to the companies a bigger gain in productivity and a better control over the workers. These changings, that reconfigure the profile of the oil work force, allowed, among other things, reduction in numbers of the effective workers in the table of employees of Petrobras, the raising of relation concercing instable works, the raising in numbers of young workers, with a little or none qualification, reduction in the salary pattern of the professional class, illegal withholdment of labourite rights and the raising of risks to the health and security of the workers

Participação administrativa processual na administração pública dialógica

The dissertation, which is based on the deductive method, by using general concepts of the theory of the administrative participation in the administrative process, addresses the importance of strengthening administrative and procedural activities of citizen involvement in public administration for the administrative consolidation of democracy in Brazil. The emergence of Administrative Law has particular importance for the understanding of its institutions and, of course, for the different fields of public administration. The authoritarian profile of this area of law still exists as a clear recollection of their origin, mainly based on a relationship of superiority of the state over the individuals. Indeed, does not even modern constitutionalism could print a true democracy administrative, since the constitutions were not properly observed by the Government. Furthermore, only the process of constitutionalization of administrative law legal relations took a more democratic profile. That is, the creation of an environment of dialogue with civil society is a recent achievement of the Brazilian government. As the administrative process involves dilemmas and solutions of state action, because it is revealed the expression government, the strengthening of institutions and principles related to the administrative procedure is important for role in making a more participatory relationship between state and citizen. Thus, administrative participation can be considered not only a mechanism of control and legitimacy of state action, but also for improvement and reduction of administrative costs, as a requirement of the principle of efficiency. The objective of this investigation is to assert as the administrative legal relation, the administrative legality, the administrative jurisdiction, the processuality administrative, the consensuality administrative and administrative justice, together with administrative participation, can contribute to a more democratic role of the Public Administration and, therefore, more dialogic and consolidator of the fundamental rights of citizens. Therefore, we highlight the importance of the administrative process and administrative participation as mechanisms for improving public policy and thus as a means of reducing administrative costs mediate the state

A migração do cuidado em saúde: do hospital para o domicílio

This study is an analysis of opportunities and challenges of health assistance migration from hospitals to home care from the approach of the Domiciliary Internment Program (PID) in Natal / RN. The research aims to identify the ways that the multidisciplinary team act and know the stories of these professionals about the situation experienced in the transition between the instituting and instituted on home care modalities. PID has as a prior focus the elderly person in stable medical conditions, not to replace the hospital care, but to offer a therapeutic support turned to the exercise of their autonomy and coexistence with the situation of diseases. The home in their internal coexistence rules preserves own customs. As the hospital care migrates to the home care, it happens in the confrontation and rationality negotiation and becomes something new, that is going to be directed by an instituting dimension. In the view of New History, that suggests an interdisciplinary approach and interprets the problems on its time and from the technique of thematic oral history, it can be seen that working in interdisciplinary team is able to incorporate new values in the way of healthcare assistance, it longs for maintaining the maximum functional capacity of patients, it presents results as the prevention of diseases, costs reduction in connection with the Hospital Service, empowers and expands the possibilities for the patient recovery by aligning with the daily life and the opportunity of the patient being assisted by a multiprofessional team, interacting on the concrete reality. Therefore, PID is in line with the contemporary demands and as an instrument to be considered in the review of a wider concept of the health-disease process

Gestão logística e comércio exterior: um estudo de caso em uma empresa exportadora do setor de alimentos

The thesis argues the importance of the logistic management for the performance of the companies and for the foreign trade. The study is endorsed in construction of one analyses that brings in its essential the underlyng elements for the understanding of the subject. The analyse made from the data of an exporters company of Rio Grande of the Norte, with performance in the branch of candies, allowed to evaluate an efficient of the logistic management, that involving operacional and financial questions, is unavoidable for reduction of costs of the companies and has significant impact is its profitability

Aplicação do método de análise hierárquica na tomada de decisão para adoção de computação em nuvem: um estudo de caso na federação das indústrias do RN

The progresses of the Internet and telecommunications have been changing the concepts of Information Technology IT, especially with regard to outsourcing services, where organizations seek cost-cutting and a better focus on the business. Along with the development of that outsourcing, a new model named Cloud Computing (CC) evolved. It proposes to migrate to the Internet both data processing and information storing. Among the key points of Cloud Computing are included cost-cutting, benefits, risks and the IT paradigms changes. Nonetheless, the adoption of that model brings forth some difficulties to decision-making, by IT managers, mainly with regard to which solutions may go to the cloud, and which service providers are more appropriate to the Organization s reality. The research has as its overall aim to apply the AHP Method (Analytic Hierarchic Process) to decision-making in Cloud Computing. There to, the utilized methodology was the exploratory kind and a study of case applied to a nationwide organization (Federation of Industries of RN). The data collection was performed through two structured questionnaires answered electronically by IT technicians, and the company s Board of Directors. The analysis of the data was carried out in a qualitative and comparative way, and we utilized the software to AHP method called Web-Hipre. The results we obtained found the importance of applying the AHP method in decision-making towards the adoption of Cloud Computing, mainly because on the occasion the research was carried out the studied company already showed interest and necessity in adopting CC, considering the internal problems with infrastructure and availability of information that the company faces nowadays. The organization sought to adopt CC, however, it had doubt regarding the cloud model and which service provider would better meet their real necessities. The application of the AHP, then, worked as a guiding tool to the choice of the best alternative, which points out the Hybrid Cloud as the ideal choice to start off in Cloud Computing. Considering the following aspects: the layer of Infrastructure as a Service IaaS (Processing and Storage) must stay partly on the Public Cloud and partly in the Private Cloud; the layer of Platform as a Service PaaS (Software Developing and Testing) had preference for the Private Cloud, and the layer of Software as a Service - SaaS (Emails/Applications) divided into emails to the Public Cloud and applications to the Private Cloud. The research also identified the important factors to hiring a Cloud Computing provider

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Desempenho de bovinos de corte mantidos em pastagem de capim-marandu submetidos a diferentes estratégias de suplementação no período das águas e da seca

Este trabalho foi realizado com o objetivo de avaliar o ganho de peso de bovinos mantidos em pastagens de Brachiaria brizantha cv. Marandu submetidos a três estratégias de suplementação no período das águas e da seca de 2003 e águas de 2004. Os tratamentos consistiram da suplementação diária (SD), em dias alternados (DA) e de segunda à sexta-feira (SF). Foram utilizados 24 bovinos mestiços com peso inicial de 230 kg. Os animais foram pesados individualmente sem jejum, em intervalos de 28 dias. O delineamento adotado foi o inteiramente casualizado, com três tratamentos e oito repetições. Não houve diferença no ganho de peso dos animais, sendo obtidos valores médios de 0,76; 0,71 e 0,74 kg/dia no período das águas de 2003, de 0,57; 0,51 e 0,54 kg/dia na seca do mesmo ano e de 0,61; 0,62 e 0,57 kg/dia no período das águas de 2004 nos tratamentos SD, da e SF, respectivamente. A redução na freqüência de suplementação pode representar uma opção para o produtor visando à redução dos custos do fornecimento da alimentação, pois permite maior racionalização da mão-de-obra na propriedade e não afeta o desempenho animal.

Ajuste automático e otimização do tempo de espera (Idle time) em bombeio mecânico de petróleo

The present work presents an algorithm proposal, which aims for controlling and improving idle time to be applied in oil production wells equipped with beam pump. The algorithm was totally designed based on existing papers and data acquired from two Potiguar Basin pilot wells. Oil engineering concepts such as submergence, pump off, Basic Sediments and Water (BSW), Inflow Performance Relationship (IPR), reservo ir pressure, inflow pressure, among others, were included into the algorithm through a mathematical treatment developed from a typical well and then extended to the general cases. The optimization will increase the well production potential maximum utilization having the smallest number of pumping unit cycles directly reflecting on operational cost and electricity consumption reduction

Desenvolvimento de uma ferramenta computacional para aplicação em métodos de elevação por bombeio centrífugo submerso

The Electrical Submersible Pump (ESP) has been one of the most appropriate solutions for lifting method in onshore and offshore applications. The typical features for this application are adverse temperature, viscosity fluids and gas environments. The difficulties in equipments maintenance and setup contributing to increasing costs of oil production in deep water, therefore, the optimization through automation can be a excellent approach for decrease costs and failures in subsurface equipment. This work describe a computer simulation related with the artificial lifting method ESP. This tool support the dynamic behavior of ESP approach, considering the source and electric energy transmission model for the motor, the electric motor model (including the thermal calculation), flow tubbing simulation, centrifugal pump behavior simulation with liquid nature effects and reservoir requirements. In addition, there are tri-dimensional animation for each ESP subsytem (transformer, motor, pump, seal, gas separator, command unit). This computer simulation propose a improvement for monitoring oil wells for maximization of well production. Currenty, the proprietaries simulators are based on specific equipments manufactures. Therefore, it is not possible simulation equipments of another manufactures. In the propose approach there are support for diverse kinds of manufactures equipments

Sistema Híbrido de Inferência Baseado em Análise de Componentes Principais e Redes Neurais Artificiais Aplicado a Plantas de Processamento de Gás Natural

Nowadays, where the market competition requires products with better quality and a constant search for cost savings and a better use of raw materials, the research for more efficient control strategies becomes vital. In Natural Gas Processin Units (NGPUs), as in the most chemical processes, the quality control is accomplished through their products composition. However, the chemical composition analysis has a long measurement time, even when performed by instruments such as gas chromatographs. This fact hinders the development of control strategies to provide a better process yield. The natural gas processing is one of the most important activities in the petroleum industry. The main economic product of a NGPU is the liquefied petroleum gas (LPG). The LPG is ideally composed by propane and butane, however, in practice, its composition has some contaminants, such as ethane and pentane. In this work is proposed an inferential system using neural networks to estimate the ethane and pentane mole fractions in LPG and the propane mole fraction in residual gas. The goal is to provide the values of these estimated variables in every minute using a single multilayer neural network, making it possibly to apply inferential control techniques in order to monitor the LPG quality and to reduce the propane loss in the process. To develop this work a NGPU was simulated in HYSYS R software, composed by two distillation collumns: deethanizer and debutanizer. The inference is performed through the process variables of the PID controllers present in the instrumentation of these columns. To reduce the complexity of the inferential neural network is used the statistical technique of principal component analysis to decrease the number of network inputs, thus forming a hybrid inferential system. It is also proposed in this work a simple strategy to correct the inferential system in real-time, based on measurements of the chromatographs which may exist in process under study

Desenvolvimento de um protocolo de comunicação para automação de subestações móveis via satélite

One of the most important decisions to turn a substation automatic and no attended it relates to the communication media between this substation and Operation Center. Generally energy companies uses radio or optic fiber, depending of distances and infrastructure of each situation. This rule applies to common substations. Mobile substations are a particular case, therefore they are conceived for use at provisional situations, emergencies, preventive or corrective maintenance. Thus the telecommunication solution used at common substations are not applied so easily to mobile substations, due absence of infrastructure (media) or difficulty to insert the mobile substation data in existing automation network not long. The ideal media must supply covering in a great geographic area to satisfy presented requirements. The implantation costs of this big infrastructure are expensive, however a existing operator may be used. Two services that fulfill that requirements are satellite and cellular telephony. This work presents a solution for automation of mobile substations through satellite. It was successfully implanted at a brazilian electric energy concessionaire named COSERN. The operation became transparent to operators. Other gotten benefits had been operational security, quality in the supply of electric energy and costs reduction. The project presented is a new solution, designed to substations and general applications where few data should be transmitted, but there is difficulties in relation to the media. Despite the satellite having been used, the same resulted can be gotten using celullar telephony, through Short Messages or packet networks as GPRS or EDGE.

S-Educ: Um Simulador de Ambiente de Robótica Educacional em Plataforma Virtual

We propose a robotics simulation platform, named S-Educ, developed specifically for application in educational robotics, which can be used as an alternative or in association with robotics kits in classes involving the use of robotics. In the usually known approach, educational robotics uses robotics kits for classes which generally include interdisciplinary themes. The idea of this work is not to replace these kits, but to use the developed simulator as an alternative, where, for some reason, the traditional kits cannot be used, or even to use the platform in association with these kits. To develop the simulator, initially, we conducted research in the literature on the use of robotic simulators and robotic kits, facing the education sector, from which it was possible to define a set of features considered important for creating such a tool. Then, on the software development phase, the simulator S-Educ was implemented, taking into account the requirements and features defined in the design phase. Finally, to validate the platform, several tests were conducted with teachers, students and lay adults, in which it was used the simulator S-Educ, to evaluate its use in educational robotics classes. The results show that robotic simulator allows a reduction of financial costs, facilitate testing and reduce robot damage inherent to its use, in addition to other advantages. Furthermore, as a contribution to the community, the proposed tool can be used to increase adhesion of Brazilian schools to the methodologies of educational robotics or to robotics competitions

Controle vetorial para velocidade de um motor de indução trifásico utilizando estimador filtro de Kalman

This paper describes the study, computer simulation and feasibility of implementation of vector control speed of an induction motor using for this purpose the Extended Kalman Filter as an estimator of rotor flux. The motivation for such work is the use of a control system that requires no sensors on the machine shaft, thus providing a considerable cost reduction of drives and their maintenance, increased reliability, robustness and noise immunity as compared to control systems with conventional sensors