Subject -centered and problem -based approaches to teaching clinical competence in physical therapy

Physical therapy students must apply the relevant information learned in their academic and clinical experience to problem solve in treating patients. I compared the clinical cognitive competence in patient care of second-year masters students enrolled in two different curricular programs: modified problem-based (M P-B; n = 27) and subject-centered (S-C; n = 41). Main features of S-C learning include lecture and demonstration as the major teaching strategies and no exposure to patients or problem solving learning until the sciences (knowledge) have been taught. Comparatively, main features of M P-B learning include case study in small student groups as the main teaching strategy, early and frequent exposure to patients, and knowledge and problem solving skills learned together for each specific case. Basic and clinical orthopedic knowledge was measured with a written test with open-ended items. Problem solving skills were measured with a written case study patient problem test yielding three subscores: assessment, problem identification, and treatment planning. ^ Results indicated that among the demographic and educational characteristics analyzed, there was a significant difference between groups on ethnicity, bachelor degree type, admission GPA, and current GPA, but there was no significant difference on gender, age, possession of a physical therapy assistant license, and GRE score. In addition, the M P-B group achieved a significantly higher adjusted mean score on the orthopedic knowledge test after controlling for GRE scores. The S-C group achieved a significantly higher adjusted mean total score and treatment management subscore on the case study test after controlling for orthopedic knowledge test scores. These findings did not support their respective research hypotheses. There was no significant difference between groups on the assessment and problem identification subscores of the case study test. The integrated M P-B approach promoted superior retention of basic and clinical science knowledge. The results on problem solving skills were mixed. The S-C approach facilitated superior treatment planning skills, but equivalent patient assessment and problem identification skills by emphasizing all equally and exposing the students to more patients with a wider variety of orthopedic physical therapy needs than in the M P-B approach. ^

A relação entre transtorno da insônia e funções executivas em adultos

The insomnia disorder is defined as a difficulty initiating or maintaining sleep or waking up earlier than expected unable to return to sleep, followed by a feeling of nonrestorative and poor quality sleep, present for at least three months, with consequences on daytime functioning. Studies have shown that insomnia affects cognitive function, especially executive functions. However, researches that sought to investigate the relationship between primary insomnia and executive functioning were quite inconsistent from a methodological point of view, especially in regard to the variability of the used methods, the heterogeneity of diagnostic criteria for insomnia and the control of sleep altering drugs. In this sense, the present study aimed to investigate the relationship between insomnia and executive functions in adults. The participants were 29 people, from both genders, aged 20-55 years old. Participants were divided into three groups, one composed of 10 people with primary insomnia who used sleep medication (GIM), nine people with primary insomnia who did not use medication (GInM) and 10 healthy people who composed the control group (CG). The research was conducted in two stages. The first one involved a diagnostic evaluation for insomnia disorder through a clinical interview and the application of the following protocols: the Athens Insomnia Scale, the Insomnia Severity Index, Sleep Journal (for 14 days), Pittsburgh Sleep Quality Index (PSQI), the Stanford Sleepiness Test, depression and anxiety Beck inventories, and Lipp’s Iventory of stress symptoms for adults. After this stage, the evaluation of executive functions was performed by applying a battery of neuropsychological tests composed by the following tests: Wisconsin, Stoop Test, Colored trails Test, the Tower of London Test, Iowa Gambling Task (IGT) and WAIS III subtest digit span, which measured selective attention, inhibitory control, cognitive flexibility, planning, problem solving, decision making and working memory, respectively. The results showed that insomniacs (GIM and GInM) showed higher sleep latency, shorter sleep duration and lower sleep efficiency compared to the CG. In regard to the performance in executive functions, no statistically significant difference between groups was observed in the evaluated modalities. However, the data show evidence that, compared to GInM and GC, the performance of GIM was lower on tasks that required quick responses and changes in attention focus. On the other hand, GInM, when compared to GIM and GC, showed a better performance on tasks involving cognitive flexibility. Furthermore, impaired sleep measures were correlated with the worst performance of insomniacs in all components evaluated. In conclusion, people with the insomnia disorder showed a performance similar to healthy people’s in components of the executive functioning. Thus, one can infer that there is a relationship between primary insomnia and executive functions in adults.

Mobilização de competências na atividade informal do vendedor ambulante em praia de Natal (RN)

The central issue of this dissertation is to investigate the labor activity of beach hawker, in order to identify the main professional competencies mobilized in this activity, traversed by both the precariousness of the means of labor exercise, as for complex and structured routines. In the town of Natal (RN) the beaches serve as workplace for thousands of informal workers, who use various professional skills, translated into the ability to mobilize and articulate knowledge, skills and behaviors to solve problems in concrete work situations. This research therefore had as main objective to investigate the work of beach hawkers, trying to identify the core competencies mobilized for facing demands and obstacles in such a context. The beach of Ponta Negra (Natal-RN) was chosen as field of observation, in which a group of hawkers took part as voluntary subjects. Methodologically, quantitative and qualitative methods of production and analysis of data were combined in three stages. In the quantitative phase an occupational questionnaire was applied to a sample of 60 subjects, generating a set of data analyzed with quantitative univariate and multidimensional descriptive statistical tools, complemented by inferential statistical analysis. The results of this phase indicate a predominance of men sellers with salary varying in a range from one to two minimum wage Brazilian salary, age and education quite heterogeneous, extended working hours and the choice of only this activity and this beach throughout the year. Concurrently with this step of analysis, unsystematic observations of the activity of vendors were held and then driven to the technique of Instruction Impersonator with four chosen subjects. This phase had a clinicalinterpretive analysis, rooted in historical-cultural Vygotskian psychological perspective and in the french approach of skills and abilities. The main results point to several strategies for overcoming obstacles, use of technics anchored in everyday work experience and practical knowledge, building rules of conduct and collective mobilization of diverse professional skills similar to those found in formal work, such as business and time management, use of communicative tools, flexibility in problem solving, creativity and teamwork competence. We conclude that informality investigated in context can not be seen exclusively as a synonym of precariousness. It also covers skills and knowledge in a complex culture that situates informal labor in a complementary way with respect to formal work. This conclusion, therefore, contributes to overcome the notion of antinomy between formal and informal labor activity, since they both can be considered as a way to achieve job satisfaction, and even a personal representation of well done job, which is an important psychological generator of identity and social place.

Avaliação da atenção humanizada ao abortamento em maternidade-escola, em Natal, Rio Grande do Norte

Unplanned pregnancy is experienced by millions of women worldwide. Such fact increases the risk of abortion-related morbimortality, which represents a serious public health problem. This study aims to evaluate the advances and challenges of the implementation of Humanized Abortion Care at the Maternity-School in Natal, state of Rio Grande do Norte. The research was evaluative, was preceded by an Evaluative Study, and resulted in a Case Study. The intentional sample totaled 102 subjects (60 users, 39 professionals and 3 managers). The collection techniques included documental analysis, semi-structured interview and observation with a field diary. The documental analysis was descriptive, while the Content Analysis by Bardin was used for semi-structured interviews and field diary. The Evaluative Study observed that Humanized Abortion Care is an evaluative program with preparation and pact of the logical model, of the matrix of indicators and evaluative questions. The Case Study showed that users were satisfied with the problem-solving capacity and access to the service; however, is also showed that they pointed out inadequacy in terms of environment, qualified hearing and reproductive planning. Professionals reported that the inefficiency of service consists of infrastructure and environment, which are considered inefficient and inadequate to humanized care, especially regarding patient accommodation, the lack of hospital beds, the reduced number of rooms in the surgical center and the lack of laboratory inside the maternity. Moreover, reproductive planning does not consist of an institutionalized practice in the service, and integrality with other services or partnership with the community is not in place. The Maternity Board emphasizes that the excessive demand of patients is one of the reasons that hinders the appropriate implementation of the technical standard. We then conclude that although satisfied regarding problem-solving capacity in terms of service and ease of access, there is room for improvement in qualified hearing systems, in the creation of a system to promote team work, implementation of ombudsman and satisfaction surveys. The right of shared choice did not prevail among users and health professionals with regard to the option of uterine evacuation procedure. Environment was the most mentioned category as that requiring more changes, seeing as a limited factor for the development of humanized and welcoming practices. Health professionals do not establish a periodic routine of planning practices, and such practices are not aligned with the Technical Standard. Incorporation of guidelines and availability of a plurality of methods and possibilities of choices for family planning are required. There is no institutionalization of reference and counter-reference, or partnerships with the community, which makes integrality of care not viable. The Standard needs to be included in the action plans of managers as one of the priorities in the construction of care strategies for women's health, in order to enable, allied to other initiatives, the real integration among safe conduct service, primary care network and social organizations. As a result, respect for human rights and adequate humanized care, as a way of attention and prevention of abortion, can be secured.

How does problem based learning fit with cognitive load theory?

This paper reports on an investigation with first year undergraduate Product Design and Management students within a School of Engineering. The students at the time of this investigation had studied fundamental engineering science and mathematics for one semester. The students were given an open ended, ill formed problem which involved designing a simple bridge to cross a river. They were given a talk on problem solving and given a rubric to follow, if they chose to do so. They were not given any formulae or procedures needed in order to resolve the problem. In theory, they possessed the knowledge to ask the right questions in order to make assumptions but, in practice, it turned out they were unable to link their a priori knowledge to resolve this problem. They were able to solve simple beam problems when given closed questions. The results show they were unable to visualise a simple bridge as an augmented beam problem and ask pertinent questions and hence formulate appropriate assumptions in order to offer resolutions.

Statistical methods for polyhedral shape classification with incomplete data - application to cryo-electron tomographic images

A certain type of bacterial inclusion, known as a bacterial microcompartment, was recently identified and imaged through cryo-electron tomography. A reconstructed 3D object from single-axis limited angle tilt-series cryo-electron tomography contains missing regions and this problem is known as the missing wedge problem. Due to missing regions on the reconstructed images, analyzing their 3D structures is a challenging problem. The existing methods overcome this problem by aligning and averaging several similar shaped objects. These schemes work well if the objects are symmetric and several objects with almost similar shapes and sizes are available. Since the bacterial inclusions studied here are not symmetric, are deformed, and show a wide range of shapes and sizes, the existing approaches are not appropriate. This research develops new statistical methods for analyzing geometric properties, such as volume, symmetry, aspect ratio, polyhedral structures etc., of these bacterial inclusions in presence of missing data. These methods work with deformed and non-symmetric varied shaped objects and do not necessitate multiple objects for handling the missing wedge problem. The developed methods and contributions include: (a) an improved method for manual image segmentation, (b) a new approach to 'complete' the segmented and reconstructed incomplete 3D images, (c) a polyhedral structural distance model to predict the polyhedral shapes of these microstructures, (d) a new shape descriptor for polyhedral shapes, named as polyhedron profile statistic, and (e) the Bayes classifier, linear discriminant analysis and support vector machine based classifiers for supervised incomplete polyhedral shape classification. Finally, the predicted 3D shapes for these bacterial microstructures belong to the Johnson solids family, and these shapes along with their other geometric properties are important for better understanding of their chemical and biological characteristics.

An exploration of students’ perceptions and attitudes towards creativity in engineering education

This study used a mixed methods approach to develop a broad and deep understanding of students’ perceptions towards creativity in engineering education. Studies have shown that students’ attitudes can have an impact on their motivation to engage in creative behavior. Using an ex-post facto independent factorial design, attitudes of value towards creativity, time for creativity, and creativity stereotypes were measured and compared across gender, year of study, engineering discipline, preference for open-ended problem solving, and confidence in creative abilities. Participants were undergraduate engineering students at Queen’s University from all years of study. A qualitative phenomenological methodology was adopted to study students’ understandings and experiences with engineering creativity. Eleven students participated in oneon- one interviews that provided depth and insight into how students experience and define engineering creativity, and the survey included open-ended items developed using the 10 Maxims of Creativity in Education as a guiding framework. The findings from the survey suggested that students had high value for creativity, however students in fourth year or higher had less value than those in other years. Those with preference for open-ended problem solving and high confidence valued creative more than their counterparts. Students who preferred open-ended problem solving and students with high confidence reported that time was less of a hindrance to their creativity. Males identified more with creativity stereotypes than females, however overall they were both low. Open-ended survey and interview results indicated that students felt they experienced creativity in engineering design activities. Engineering creativity definitions had two elements: creative action and creative characteristic. Creative actions were associated with designing, and creative characteristics were predominantly associated with novelty. Other barriers that emerged from the qualitative analysis were lack of opportunity, lack of assessment, and discomfort with creativity. It was concluded that a universal definition is required to establish clear and aligned understandings of engineering creativity. Instructors may want to consider demonstrating value by assessing creativity and establishing clear criteria in design projects. It is recommended that students be given more opportunities for practice through design activities and that they be introduced to design and creative thinking concepts early in their engineering education.

Nuevo marco para la producción de textos académicos

Este trabajo presenta la reelaboración de un modelo de producción de textos escritos, publicado por el Grupo Didactext en 2003. Se sitúa en un marco sociocognitivo, lingüístico y didáctico, y está concebido desde la interacción de tres dimensiones simbolizadas por círculos concéntricos recurrentes. El primer círculo corresponde al ámbito cultural: las diversas esferas de la praxis humana en las que está inmersa toda actividad de composición escrita. El segundo se refiere a los contextos de producción, de los que forman parte el contexto social, el situacional, el físico, la audiencia y el medio de composición. El tercer círculo corresponde al individuo, en el que se tiene en cuenta el papel de la memoria en la producción de un texto desde el enfoque sociocultural, la motivación, las emociones y las estrategias cognitivas y metacognitivas, dentro de las cuales se conciben seis unidades funcionales que actúan en concurrencia: acceso al conocimiento, planificación, redacción, revisión y reescritura, edición, y presentación oral. La orientación didáctica se interesa por la enseñanza y el aprendizaje de la escritura académica en las aulas, así como por la investigación de la escritura en contextos de educación.

Decision Making for Teams of Mobile Robots

In the past years, we could observe a significant amount of new robotic systems in science, industry, and everyday life. To reduce the complexity of these systems, the industry constructs robots that are designated for the execution of a specific task such as vacuum cleaning, autonomous driving, observation, or transportation operations. As a result, such robotic systems need to combine their capabilities to accomplish complex tasks that exceed the abilities of individual robots. However, to achieve emergent cooperative behavior, multi-robot systems require a decision process that copes with the communication challenges of the application domain. This work investigates a distributed multi-robot decision process, which addresses unreliable and transient communication. This process composed by five steps, which we embedded into the ALICA multi-agent coordination language guided by the PROViDE negotiation middleware. The first step encompasses the specification of the decision problem, which is an integral part of the ALICA implementation. In our decision process, we describe multi-robot problems by continuous nonlinear constraint satisfaction problems. The second step addresses the calculation of solution proposals for this problem specification. Here, we propose an efficient solution algorithm that integrates incomplete local search and interval propagation techniques into a satisfiability solver, which forms a satisfiability modulo theories (SMT) solver. In the third decision step, the PROViDE middleware replicates the solution proposals among the robots. This replication process is parameterized with a distribution method, which determines the consistency properties of the proposals. In a fourth step, we investigate the conflict resolution. Therefore, an acceptance method ensures that each robot supports one of the replicated proposals. As we integrated the conflict resolution into the replication process, a sound selection of the distribution and acceptance methods leads to an eventual convergence of the robot proposals. In order to avoid the execution of conflicting proposals, the last step comprises a decision method, which selects a proposal for implementation in case the conflict resolution fails. The evaluation of our work shows that the usage of incomplete solution techniques of the constraint satisfaction solver outperforms the runtime of other state-of-the-art approaches for many typical robotic problems. We further show by experimental setups and practical application in the RoboCup environment that our decision process is suitable for making quick decisions in the presence of packet loss and delay. Moreover, PROViDE requires less memory and bandwidth compared to other state-of-the-art middleware approaches.

Are we asking the right questions? Rethinking post-graduate design education towards sustainable visions for the future

Our society is currently facing complex challenges, such us climate change, loss of biodiversity, ageing population, unemployment, to name but a few. This has created growing expectations on designers and engineers to explore, experiment and implement innovative solutions to such issues. At this critical time, if we want design to be part of the solution, we need to wonder whether we are asking designers suitable and sustainable questions. Both in post-graduate design education and in business, the brief still overwhelmingly requires designers to follow a linear problem-solving approach that focuses on product rather than strategies, services and systems. Traditional design briefs result no longer appropriate to face the challenges of our unsustainable world, as they relate to market, growth economy and human needs rather than society, business models and the needs of nature. Instead, we need to be asking questions about, for example, how we create sustainable business opportunities, how we overcome the barriers for change, or how we facilitate the process of innovation through design methodology. If the role of design is to create new visions and outline strategic directions towards a sustainable future world - for policy makers, businesses, communities and individual citizens – we need those stakeholders to create briefs for designers that allow them to do that. This paper will explain how the reframing of questions has been embedded into SustainRCA’s teaching practice in post-graduate design, art and engineering, leading to the development of new tools and methods, as well as some innovative outcomes

A competência global na aula de língua inglesa : como preparar os alunos para viver e agir no mundo atual?

Este estudo teve como principais objetivos compreender os efeitos de um projeto de educação global nos conhecimentos, capacidades e atitudes de um grupo de alunos portugueses do 11.º ano, bem como compreender as potencialidades da aula de língua inglesa no âmbito de uma educação promotora da participação ativa numa sociedade globalizada. Tratando-se de um estudo de tipo investigação-ação, ancorado no paradigma socio-crítico, foram recolhidos dados através de questionários, aplicados aos alunos antes e após o projeto de intervenção, de gravações vídeo de quatro sessões de educação global e de uma entrevista realizada à professora cooperante. Recorreu-se ainda à recolha documental de trabalhos dos alunos, bem como do Programa de Inglês (continuação) dos 10.º, 11.º e 12.º anos. A análise dos dados recolhidos, efetuada segundo diferentes métodos e instrumentos, permitiu concluir que o projeto de educação global teve efeitos mais significativos no desenvolvimento dos conhecimentos dos alunos, sobretudo relacionados com problemas globais específicos, tendo estes compreendido que o que acontece em outros locais tem relevância na vida de cada um. O estudo permitiu ainda verificar que as aulas de língua inglesa são o espaço ideal para se trabalhar a educação global, funcionando como uma porta aberta para outras línguas, culturas e mundivisões. Estes resultados sugerem que é possível e necessário promover o desenvolvimento da competência global na aula de línguas, mobilizando e incorporando saberes e recursos que valorizem capacidades de trabalho colaborativo, de comunicação e de resolução de problemas, bem como atitudes de respeito pelos Outros, imprescindíveis para o exercício da cidadania e para desafiar as injustiças e desigualdades que nos rodeiam.

The strategic role of design in supporting knowledge exchange

Within the last decade design has had a strategic role in tackling escalating environmental, social and economic problems. Through design thinking, creative methods have been applied to problem solving in a process of collaboration and designers working in new territories and knowledge domains. As the designer has moved further afield the method of Knowledge Exchange (KE) has become more recognised as a democratic approach to collaboration with the ethos that everyone has something creative and productive to offer. This paper provides reflections on early stage findings from a strategic design innovation process in which collaborative partnerships between academics, SMEs and designers emerged through KE and suggests that there is value to be had from using design strategically for not only those from a business or academic background but also for those from the design community and points to a need for more training for designers from all disciplines in how to use design strategically

The +Contigo Project in the Voice of Eight-Grade Students

The +Contigo Project is a longitudinal research project based on a multilevel network intervention aimed at promoting mental health and well-being and preventing suicidal behaviors. Students participate in social skills training sessions on the stigma of mental disorders, adolescence, self-esteem, problem-solving skills, and wellbeing. Problem statement: To identify the qualitative impact of the +Contigo Project. Objectives: To identify the importance of the project for students, the problem situations which it helped to solve, and its impact on an individual level. Research methods: Content analysis (Bardin, 2009) with a posteriori categorical identification. Semi-structured interview guide with 5 questions. A convenience sample of 16 students, from three schools of one school cluster in the Center Region of Portugal, was used. The ethical aspects of parental consent, voluntary participation and data confidentiality were addressed. Findings: Fourteen categories emerged from the data analysis. The answers to Question 4 'How was this project important to you?' were particularly relevant. Students mentioned that it improved their self-esteem by increasing self-confidence and interpersonal skills, and that it increased their reflection and awareness on problems with which they learned how to cope during the sessions. Conclusions: All interviewees considered that the +Contigo project helped them to solve problems, improve their interpersonal skills and cope with the adolescence period. Students improved their self-esteem and self-knowledge, and were able to apply what they had learned in the sessions in their daily lives. We concluded that the project had a positive impact on the students' mental health.

Desenvolvimento e implementação de uma abordagem CTSA do conceito de acidez no ensino da física e química

A emergência de questões tecnológicas, sociais e ambientais transformam o ensino das ciências num enorme desafio. A escassez e a contaminação da água, resultante de actividades antropogénicas, perspectiva-se hoje como um problema de futuro. Este tema, parte integrante do programa de Química do 11o Ano, inspirou uma intervenção didáctica baseada numa metodologia de resolução problemas que se pode enquadrar numa abordagem do tipo CTSA. A intervenção proposta, a partir de uma saída de campo que se concretizou na Mina de S. Domingos, teve por objectivos melhorar as aprendizagens realizadas pelos alunos e promover a mudança de atitudes face ao Ambiente e ao consumo de água em particular. Os dados recolhidos, analisados segundo métodos qualitativos e quantitativos, revelaram melhores conhecimentos e atitudes mais favoráveis relativamente à Ciência e à disciplina de Física e Química, e face ao Ambiente e ao consumo de água, reforçando a importância deste tipo de abordagens. ABSTRACT; The emergent technology, social and environmental issues are making the science teaching a huge challenge. The shortage and the contamination of water, as result of anthropogenic activities, are faced today like a future problem. This theme is part of the Chemistry subject curriculum of the eleventh grade level and it inspired a didactic intervention based upon a problem solving methodology that can be framed in a STSE approach. The goals of the proposed intervention, taking Mina de S. Domingos for a field trip, meant to improve the students' learnings and to promote a change of attitudes in relation to the environment and to the water consumption, in particular. The collected data, analyzed according to qualitative and quantitative methods, showed better knowledge and more favorable attitudes towards Science and Physics and Chemistry, as well as regarding the environment and water consumption, enhancing the importance of this kind of approach.

Problem-Based SRS: método para especificação de requisitos de software baseado em problemas

Requirements specification has long been recognized as critical activity in software development processes because of its impact on project risks when poorly performed. A large amount of studies addresses theoretical aspects, propositions of techniques, and recommended practices for Requirements Engineering (RE). To be successful, RE have to ensure that the specified requirements are complete and correct what means that all intents of the stakeholders in a given business context are covered by the requirements and that no unnecessary requirement was introduced. However, the accurate capture the business intents of the stakeholders remains a challenge and it is a major factor of software project failures. This master’s dissertation presents a novel method referred to as “Problem-Based SRS” aiming at improving the quality of the Software Requirements Specification (SRS) in the sense that the stated requirements provide suitable answers to real customer ́s businesses issues. In this approach, the knowledge about the software requirements is constructed from the knowledge about the customer ́s problems. Problem-Based SRS consists in an organization of activities and outcome objects through a process that contains five main steps. It aims at supporting the software requirements engineering team to systematically analyze the business context and specify the software requirements, taking also into account a first glance and vision of the software. The quality aspects of the specifications are evaluated using traceability techniques and axiomatic design principles. The cases studies conducted and presented in this document point out that the proposed method can contribute significantly to improve the software requirements specification.