908 resultados para Image-to-Image Variation
Resumo:
In this work, we analyze the long term variability of rainfall and temperature (1912-2008) of Santa Maria (29 degrees S, 53 degrees W) and its possible connection with natural influences such as solar activity and ENSO. Temperature and rainfall present similar frequencies as revealed by spectral analyses. This analysis shows a large number of short periods between 2-8 years and periods of 11.8-12.3, 19.1-21.0, and 64.3-82.5 years. The cross correlation for rainfall and temperature versus Southern Oscillation Index (SOI) have higher cross-power around 2-8 yr. Rainfall and temperature versus sunspot number (Rz) showed higher cross-power around the 11-yr solar cycle period. A high and continuous cross correlation was observed for Rz-22 yr versus rainfall and temperature. Furthermore, the power between 22-yr solar cycle and meteorological parameters was higher than that obtained with the 11-yr solar cycle, suggesting that the effect of Hale cycle on climate may be stronger than the Schwabe cycle effect. These results indicate that the variability of rainfall and temperature is closely related to the variation of the Southern Oscillation Index and solar activity, and that the El Nino Southern Oscillation and solar activity probably play an important role in the climate system over Southern Brazil. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
The oregano is a plant, rich in essential oil and very used as spice in the preparation of foods. The objective of this paper was to analyze the viability of irrigation for oregano in Presidente Prudente, São Paulo state, Brazil, including economic risk factors, their effect on irrigation total cost, as well as the different pumping kinds. The Monte Carlo simulation was utilized to study the economic factors: fixed cost, labor, maintenance, pumping and water. The use of irrigation for the oregano in the region of Presidente Prudente is indicated because of its economic feasibility and the reduced risks. The average values of the benefit/cost for all water depths tested were higher than 1, indicating viability. The use of irrigation promoted lower risks compared to the non irrigated crop. The micro irrigation system presented greater sensitivity to changes of prices of the equipment associated to the variation of the useful life of the system. The oregano selling price was the most important factor involved in annual net profit. The water cost was the factor of lesser influence on the total cost. Due to the characteristic of high drip irrigation frequency there was no difference between the tariffs based in use hour of electric energy classified as green and blue, which are characterized by applying different rates on the energy consumption and demand according to the hours of day and times of the year. For the studied region it was recommended drip irrigation water management of oregano with the daily application of 100% of pan evaporation Class A using electric motor with tariffs blue or green.
Resumo:
Lead-based multiferroics perovskites with nominal compositions Pb(Fe1/2Nb1/2)O3 and Pb(Fe2/3W1/3)O3 were synthesized following a two-stage method. Magnetic proprieties were investigated and correlated to anelastic proprieties, measured by the conventional pulse-echo method. The discussions are focused in the region around 250 K, where magnetoelectroelastic instabilities have been observed. X-ray absorption nearedge structure (XANES) study further indicates that the edge position varies with temperature revealing a fluctuation on the valence of iron ions with the temperature, which can be related to a variation in anelastic and magnetic proprieties.
Resumo:
In the past a change in temperature of 5°C most often occurred over intervals of thousands of years. According to estimates by the IPCC, in the XXI century is expected an increase in average temperatures in Europe between 1.8 and 4.0°C in the best case caused by emissions of carbon dioxide and other GHG from human activities. As well as on the environment and economic context, global warming will have effects even on road safety. Several studies have already shown how increasing temperature may cause a worsening of some types of road surface damages, especially rutting, a permanent deformation of the road structures consisting in the formation of a longitudinal depression in the wheelpath, mostly due to the rheological behavior of bitumen. This deformation evolves during the hot season because of the heating capacity of the asphalt layers, in fact, the road surface temperature is up to 24°C higher than air. In this thesis, through the use of Wheeltrack test, it was studied the behavior of some types of asphalt concrete mixtures subjected to fatigue testing at different temperatures. The objectives of this study are: to determine the strain variation of different bituminous mixture subjected to fatigue testing at different temperature conditions; to investigate the effect of aggregates, bitumen and mixtures’ characteristics on rutting. Samples were made in the laboratory mostly using an already prepared mixtures, the others preparing the asphalt concrete from the grading curve and bitumen content. The same procedure was performed for each specimen: preparation, compaction using the roller compactor, cooling and heating before the test. The tests were carried out at 40 - 50 - 60°C in order to obtain the evolution of deformation with temperature variation, except some mixtures for which the tests were carried out only at 50°C. In the elaboration of the results were considered testing parameters, component properties and the characteristics of the mixture. Among the testing parameters, temperature was varied for each sample. The mixtures responded to this variation with a different behavior (linear logarithmic and exponential) not directly correlated with the asphalt characteristics; the others parameters as load, passage frequency and test condition were kept constant. According to the results obtained, the main contribution to deformation is due to the type of binder used, it was found that the modified bitumen have a better response than the same mixtures containing traditional bitumen; to the porosity which affects negatively the behavior of the samples and to the homogeneity ceteris paribus. The granulometric composition did not seem to have interfered with the results. Overall has emerged at working temperature, a decisive importance of bitumen composition, than the other characteristics of the mixture, that tends to disappear with heating in favor of increased dependence of rutting resistance from the granulometric composition of the sample considered. In particular it is essential, rather than the mechanical characteristics of the binder, its chemical properties given by the polymeric modification. To confirm some considered results, the maximum bulk density and the air voids content were determined. Tests have been conducted in the laboratories of the Civil Engineering Department at NTNU in Trondheim according to European Standards.
Resumo:
Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.
Resumo:
Combustion control is one of the key factors to obtain better performances and lower pollutant emissions for diesel, spark ignition and HCCI engines. An algorithm that allows estimating, as an example, the mean indicated torque for each cylinder, could be easily used in control strategies, in order to carry out cylinders trade-off, control the cycle to cycle variation, or detect misfires. A tool that allows evaluating the 50% of Mass Fraction Burned (MFB50), or the net Cumulative Heat Release (CHRNET), or the ROHR peak value (Rate of Heat Release), could be used to optimize spark advance or to detect knock in gasoline engines and to optimize injection pattern in diesel engines. Modern management systems are based on the control of the mean indicated torque produced by the engine: they need a real or virtual sensor in order to compare the measured value with the target one. Many studies have been performed in order to obtain an accurate and reliable over time torque estimation. The aim of this PhD activity was to develop two different algorithms: the first one is based on the instantaneous engine speed fluctuations measurement. The speed signal is picked up directly from the sensor facing the toothed wheel mounted on the engine for other control purposes. The engine speed fluctuation amplitudes depend on the combustion and on the amount of torque delivered by each cylinder. The second algorithm processes in-cylinder pressure signals in the angular domain. In this case a crankshaft encoder is not necessary, because the angular reference can be obtained using a standard sensor wheel. The results obtained with these two methodologies are compared in order to evaluate which one is suitable for on board applications, depending on the accuracy required.
Resumo:
In the framework of developing defect-based life models, in which breakdown is explicitly associated with partial discharge (PD)-induced damage growth from a defect, ageing tests and PD measurements were carried out in the lab on polyethylene (PE) layered specimens containing artificial cavities. PD activity was monitored continuously during aging. A quasi-deterministic series of stages can be observed in the behavior of the main PD parameters (i.e. discharge repetition rate and amplitude). Phase-resolved PD patterns at various ageing stages were reproduced by numerical simulation which is based on a physical discharge model devoid of adaptive parameters. The evolution of the simulation parameters provides insight into the physical-chemical changes taking place at the dielectric/cavity interface during the aging process. PD activity shows similar time behavior under constant cavity gas volume and constant cavity gas pressure conditions, suggesting that the variation of PD parameters may not be attributed to the variation of the gas pressure. Brownish PD byproducts, consisting of oxygen containing moieties, and degradation pits were found at the dielectric/cavity interface. It is speculated that the change of PD activity is related to the composition of the cavity gas, as well as to the properties of dielectric/cavity interface.
Resumo:
Il presente lavoro ha avuto lo scopo di identificare le caratteristiche di filtrabilità della birra attraverso lo svolgimento di prove tecnologiche di filtrazione in scala di laboratorio e su scala pilota, utilizzando diverse tipologie di sistemi filtranti e sperimentando diversi materiali di membrana. La fase preliminare della caratterizzazione della filtrabilità della birra è stata condotta presso i laboratori del Campden-BRI – The Brewing Research International, Inghilterra, mentre le prove tecnologiche su scala pilota si sono svolte presso il CERB – Centro di Eccellenza per la Ricerca sulla Birra. Le prove di filtrazione e le analisi sui campioni hanno permesso di verificare le performance delle diverse membrane utilizzate in risposta alla variazione dei principali parametri del processo di filtrazione tangenziale. Sono stati analizzati diversi parametri di qualità della birra filtrata attraverso il monitoraggio del processo e lo svolgimento di prove analitiche sul prodotto volte ad evidenziare gli effetti delle differenti tecnologie adottate. Per quanto riguarda le prove di laboratorio per la caratterizzazione della filtrabilità della birra, l’analisi della PCS (Photon Correlation Spectroscopy) è stata utilizzata per verificare l’influenza di diversi trattamenti enzimatici sulla efficienza del processo di filtrazione e la loro influenza sulla stabilità colloidale della birra filtrata. Dai risultati ottenuti è emerso che il PCS è un valido strumento per determinare la distribuzione in classi di diametro e il diametro medio effettivo delle particelle solide in sospensione nella birra e può essere utilizzato sia per predire la stabilità della birra filtrata, sia per monitorare il processo di filtrazione in tempo reale.
Resumo:
Co-evolving with the human host, gut microbiota establishes configurations, which vary under the pressure of inflammation, disease, ageing, diet and lifestyle. In order to describe the multi-stability of the microbiome-host relationship, we studied specific tracts of the bacterial trajectory during the human lifespan and we characterized peculiar deviations from the hypothetical development, caused by disease, using molecular techniques, such as phylogenetic microarray and next-generation sequencing. Firstly, we characterized the enterocyte-associated microbiota in breast-fed infants and adults, describing remarkable differences between the two groups of subjects. Successively, we investigated the impact of atopy on the development of the microbiome in Italian childrens, highlithing conspicuous deviations from the child-type microbiota of the Italian controls. To explore variation in the gut microbiota depending on geographical origins, which reflect different lifestyles, we compared the phylogenetic diversity of the intestinal microbiota of the Hadza hunter-gatherers of Tanzania and Italian adults. Additionally, we characterized the aged-type microbiome, describing the changes occurred in the metabolic potential of the gut microbiota of centenarians with respect to younger individuals, as a part of the pathophysiolology of the ageing process. Finally, we evaluated the impact of a probiotics intervention on the intestinal microbiota of elderly people, showing the repair of some age-related dysbioses. These studies contribute to elucidate several aspects of the intestinal microbiome development during the human lifespan, depicting the microbiota as an extremely plastic entity, capable of being reconfigured in response to different environmental factors and/or stressors of endogenous origin.
Resumo:
Während Therapeutisches Drug Monitoring (TDM) im klinischen Alltag der stationären Behandlung in der Psychiatrie bereits fest etabliert ist, kommt es in der ambulanten Betreuung von psychisch Kranken bislang noch selten zum Einsatz. Ziel dieser Arbeit war es zu klären, wie TDM im ambulanten Bereich eingesetzt wird, wann seine Anwendung sinnvoll ist und ob es Hinweise gibt, dass TDM zu einer besseren Psychopharmakotherapie beitragen kann. rnEine Grundvoraussetzung für den Einsatz von TDM ist die Messbarkeit des Arzneistoffes. Am Beispiel des Antipsychotikums Flupentixol wurde eine Quantifizierungsmethode entwickelt, validiert und in die Laborroutine integriert. Die neue Methode erfüllte alle nach Richtlinien vorgegebenen Anforderungen für quantitative Laboruntersuchungen. Die Anwendbarkeit in der Laborroutine wurde anhand von Untersuchungen an Patienten gezeigt. rnEine weitere Voraussetzung für eine TDM-geleitete Dosisanpassung ist die Kenntnis des therapeutischen Referenzbereiches. In dieser Arbeit wurde exemplarisch ein Referenzbereich für das Antipsychotikum Quetiapin ermittelt. Die Untersuchung verglich darüber hinaus die neu eingeführten Arzneiformulierung Quetiapin retard mit schnell freisetzendem Quetiapin. Es zeigte sich, dass die therapiebegleitenden Blutspiegelkontrollen beider Formulierungen mit der Einstellung des Blutspiegels auf den therapeutischen Bereich von 100 - 500 ng/ml die Wahrscheinlichkeit des Therapieansprechens erhöhen. Bei den verschiedenen Formulierungen musste unbedingt auf den Zeitpunkt der Blutentnahmen nach Einnahme geachtet werden.rnEs wurde eine multizentrische Querschnittsuntersuchung zur Analyse von TDM unter naturalistischen Bedingungen an ambulanten Patienten durchgeführt, und zwar in Ambulanzen, in denen TDM als fester Bestandteil der Therapieüberwachung genutzt wurde und in Ambulanzen, in denen TDM sporadisch engesetzt, bzw. neu eingeführt wurde. Nach dieser Erhebung schien die Anwendung von TDM zu einer besseren Versorgung der Patienten beizutragen. Es wurde festgestellt, dass in den Ambulanzen mit bewusster Anwendung von TDM mehr Patienten mit Blutspiegeln im therapeutischen Bereich vorkamen als in den Ambulanzen mit nur sporadisch durchgeführten Blutspiegelmessungen. Bei Letzteren betrug die mittlere Anzahl an Medikamenten pro Patient 2,8 gegenüber 2,2 in den anderen Ambulanzen, was mit höheren Nebenwirkungsraten einherging. Die Schlussfolgerung, dass das Einstellen der Blutspiegel auf den therapeutischen Bereich auch tatsächlich zu besseren Therapieeffekten führte, konnte mit der Studie nicht valide überprüft werden, da die Psychopathologie nicht adäquat abgebildet werden konnte. Eine weitere Erkenntnis war, dass das reine Messen des Blutspiegels nicht zu einer Verbesserung der Therapie führte. Eine Verbesserung der Anwendung von TDM durch die Behandler wurde nach einer Schulung festgestellt, die das Ziel hatte, die Interpretation der Blutspiegelbefunde im Kontext mit patienten- und substanzspezifischen Informationen zu verbessern. Basierend auf dieser Erfahrung wurden Arzneistoffdatenblätter für die häufigsten angewandten Antipsychotika und Antidepressiva entwickelt, um damit die ambulanten Ärzte für eine eigenständige Befundinterpretation zu unterstützen. rnEin weiterer Schwerpunkt der Untersuchungen an ambulanten Patienten war die Aufdeckung von Non-Compliance durch TDM. Ein neu entwickeltes Verfahren, durch Berechnung der Streuung der mittleren Blutspiegel, erwies sich als geeignetes Instrument zur Compliance-Kontrolle in der Clozapin-Langzeittherapie. Es war etablierten anderen Verfahren überlegen. Demnach hatten Patienten ein erhöhtes Rückfallrisiko, wenn der Variationskoeffizient von nur drei nacheinander gemessenen Blutspiegeln größer als 20 % war. Da für die Beurteilung des Variationskoeffizienten das Messen von nur drei aufeinander folgenden Blutspiegeln notwendig war, kann diese Methode leicht in den ambulanten Alltag integriert werden. Der behandelnde Arzt hat so die Möglichkeit, einen rückfallgefährdeten Patienten noch vor seiner psychopathologischen Verschlechterung zu erkennen und ihn beispielsweise durch engmaschigeres Supervidieren vor einem Rückfall zu bewahren.rnAlles in allem konnte durch die eigenen Untersuchungen an psychiatrischen Patienten, die unter naturalistischen Bedingungen behandelt wurden, gezeigt werden, wie die Voraussetzungen für die Anwendung von TDM geschaffen werden, nämlich durch die Etablierung und Validierung einer Messmethode und durch die Evaluierung eines therapeutischen Referenzbereiches und wie TDM bei adäquatem Einsatz, nach Verbesserung der Compliance und des Kenntnisstandes der behandelnden Ärzte im praktischen und theoretischen Umgang mit TDM, die Versorgung ambulanter psychiatrischer Patienten unterstützen kann.
Resumo:
Nel panorama motoristico ed automobilistico moderno lo sviluppo di motori a combustione interna e veicoli è fortemente influenzato da diverse esigenze che spesso sono in contrasto le une con le altre. Infatti gli obiettivi di economicità e riduzione dei costi riguardanti la produzione e la commercializzazione dei prodotti sono in contrasto con gli sforzi che devono essere operati dalle case produttrici per soddisfare le sempre più stringenti normative riguardanti le emissioni inquinanti ed i consumi di carburante dei veicoli. Fra le numerose soluzioni presenti i veicoli ibridi rappresentano una alternativa che allo stato attuale è già presente sul mercato in varie forme, a seconda della tipologie di energie accoppiate. In letteratura è possibile trovare numerosi studi che trattano l’ottimizzazione dei componenti o delle strategie di controllo di queste tipologie di veicoli: in moltissimi casi l’obiettivo è quello di minimizzare consumi ed emissioni inquinanti. Normalmente non viene posta particolare attenzione agli effetti che l’aggiunta delle macchine elettriche e dei componenti necessari per il funzionamento delle stesse hanno sulla dinamica del veicolo. Il presente lavoro di tesi è incentrato su questi aspetti: si è considerata la tipologia di veicoli ibridi termici-elettrici di tipo parallelo andando ad analizzare come cambiasse il comportamento dinamico del veicolo in funzione del tipo di installazione considerato per la parte elettrica del powertrain. In primo luogo è stato quindi necessario costruire ed implementare un modello dinamico di veicolo che permettesse di applicare coppie alle quattro ruote in maniera indipendente per considerare diverse tipologie di powertrain. In seguito si sono analizzate le differenze di comportamento dinamico fra il veicolo considerato e l’equivalente versione ibrida e i possibili utilizzi delle macchine elettriche per correggere eventuali deterioramenti o cambiamenti indesiderati nelle prestazioni del veicolo.
Resumo:
Alle Doldengewächse (Apiaceae), darunter die größte, weltweit verbreitete Unterfamilie der Apioideen, weisen in ihren Blütenständen sehr einheitliche Merkmale auf. Die ‚Doppeldolden´ werden aus kleinen, weißen oder gelben Blüten gebildet und von vielen unspezialisierten Insekten besucht. Der uniforme Eindruck, der damit erweckt wird, ist unter Umständen ein Grund, dass die zugrundeliegende Morphologie bislang wenig untersucht wurde. Gegenstand der vorliegenden Dissertation ist es daher, die ‚verborgene Diversität´ im Blütenstandsbereich der Apiaceae -Apioideen mit dem Ziel darzustellen, den Einfluss der Architektur der Pflanzen auf die Art der Blütenpräsentation in Raum und Zeit und damit auf das Reproduktionssystem der Art zu ermitteln. Im ersten Kapitel zeigt der Vergleich von neun ausgewählten Arten, dass in den selbstfertilen und unspezifisch bestäubten Pflanzen durch Synchronisation und Rhythmik in der Präsentation von Blüten Fremdbefruchtung gefördert wird. Entweder durchlaufen die Pflanzen dabei nur eine getrennte männliche und weibliche Blühphase (Xanthoselinum alsaticum) oder der moduläre Bau der Pflanzen führt zu einer Folge männlicher und weiblicher Blühphasen (multizyklische Dichogamie). Die Diözie in Trinia glauca kann in diesem Zusammenhang als eine Trennung der Blühphasen auf verschiedengeschlechtliche Individuen gesehen werden. Für die andromonözischen Arten wird gezeigt, dass der Anteil funktional männlicher Blüten mit steigender Doldenordnung nicht einheitlich zu- oder abnimmt. Dadurch fungieren die Pflanzen zu verschiedenen Zeiten und mit unterschiedlicher Stärke eher als Pollenrezeptoren oder Pollendonatoren. Es wird deutlich, dass das ‚uniforme Muster‘ der Apioideen mit Dolden verschiedener Ordnungen, dichogamen Blüten und deren diversen Geschlechtsausbildungen ein komplexes Raum-Zeit-Gefüge zur Optimierung des Reproduktionssystems darstellt. Das zweite Kapitel stellt die Ergebnisse von Manipulationsexperimenten (Handbestäubung, Bestäuberabschirmung, Entfernen von Dolden niedriger Ordnung) an Chaerophyllum bulbosum dar, die zeigen, dass das Raum-Zeit-Gefüge in der Präsentation der Blüten der Art erlaubt, flexibel auf Umwelteinflüsse zu reagieren. Es stellt sich heraus, dass mechanische Beschädigungen kaum Einfluss auf den Andromonöziegrad und prozentualen Fruchtansatz der Individuen nehmen. Grundvoraussetzung der Reaktionsfähigkeit ist wiederum deren modulärer Bau. Dieser erlaubt es den Pflanzen, zusammen mit dem andromonöziebedingten Reservoir an - geschlechtlich flexiblen - männlichen Blüten, in den später angelegten Dolden fehlenden Fruchtansatz der Blüten früh blühender Dolden zu kompensieren. Im dritten Kapitel wird eine vergleichende Merkmalsanalyse an 255 Apioideen-Arten vorgelegt, die alle Verwandtschaftskreise, Wuchsformen und Verbreitungsgebiete der Gruppe repräsentieren. Ziel der Analyse war die Identifizierung von Merkmalssyndromen, die den Zusammenhang zwischen Architektur und Reproduktionssystem verdeutlichen sollten. Interessanterweise sind die einzigen Merkmale, die miteinander einhergehen, Protogynie und die graduelle Abnahme männlicher Blüten mit steigender Doldenordnung. Alle anderen Merkmale variieren unabhängig voneinander und erzeugen auf vielen verschiedenen Wegen immer wieder das gleiche Funktionsmuster, das als ‚breeding syndrome‘ der Apioideae gedeutet werden kann. Die Arbeit leistet einen wichtigen Beitrag zum Verständnis der Blütenstände der Apiaceen und darüber hinaus zu morphologischer Variation in ‚unspezialisierten‘ Reproduktionssystemen. Offensichtlich liegt in den Apioideen der Selektionsdruck auf der Aufrechterhaltung der generalisistischen Bestäubung und überprägt alle morphologisch-phylogenetischen Merkmalsvarianten.
Resumo:
Die Leishmaniose gehört zu den „vernachlässigten tropischen Erkrankungen“. Sie wird durch parasitäre Protozoen der Gattung Leishmania ausgelöst. Weltweit sind ca. 12 Mio. Menschen infiziert, ca. 70 Tausend erliegen ihr jährlich. Die aktuelle Therapie wird überschattet von Toxizitäts- und Teratogenitätsproblemen und von aufkommenden Resistenzen. Die von den Leishmanien exprimierten Cysteinproteasen spielen vielfältige Rollen bei Wachstum und Vermehrung der Erreger. Aufgrund der evolutionären Verwandtschaft der Enzyme sind die parasitären Cysteinproteasen strukturell den humanen sehr ähnlich. Die Herausforderung bei der Entwicklung antiparasitärer Wirkstoffe, basierend auf der Hemmung dieser Proteasen, besteht deshalb darin, sehr selektive Inhibitoren zu entwickeln, die die Wirtsproteasen nicht, oder nur in einem vertretbaren Rahmen, inhibieren. Das Ziel dieser Arbeit war die Weiterentwicklung der Aziridin-2,3-dicarbonsäure-basierten Cysteinproteaseinhibitoren RV122C bzw. CS09 hinsichtlich Selektivität und Aktivität gegenüber der parasitären Cathepsin-L-ähnlichen Cystein-Protease LmCPB2.8 durch Design, incl. Docking, Synthese und Testung. Neben der gezielten Variation nicht essenzieller Gruppen wurde molekulares Docking mittels AutoDock Vina an Cruzain als verwandtes Modellenzym durchgeführt, um durch Variationen K.O.-Kandidaten für die Differenzierung zwischen zwei postulierten Bindungsmodi zu finden. Die Ergebnisse der Enzymassays zeigen eine Verbesserung der Hemmeigenschaften bei gleichzeitig verbesserter Selektivität sowie erhöhter ligand efficiency und ligand lipophilic efficiency für Derivate mit sterisch anspruchsvolleren Ester-Resten und für Derivate mit einer freien Carbonsäurefunktion am Aziridin-Ring (Halbester).
Resumo:
The corrosion of metallic materials is a crucial issue on an economical and ecological scale. Corrosion protection becomes then necessarily needed. The main focus of the thesis is to develop stimuli-responsive nanocontainers for self-healing in corrosion protection. A nanocontainer is efficient if distinct payloads can be selectively released via different stimuli because unwanted and unspecific release can be avoided. For anti-corrosion, the wanted nanocontainer is the one able to release its self-healing agents or corrosion inhibitors upon change of pH- or/and redox-potential due to the variation of these two signals at the corroded sites. Conducting polymers such as polyaniline (PANI) were chosen for building the shell of capsules due to their important characteristics of being both pH- and redox responsive.
Resumo:
Lesion formation on root surfaces of human posterior teeth was studied in acetate/lactate buffers with a background electrolyte composition based on plaque fluid analyses. Lesion depth after 28 days at 37 degrees C was measured in relation to: the presence or absence of cementum; the concentration of undissociated buffer; the presence or absence of magnesium ions at plaque fluid concentration. Each factor was evaluated at several values of -log(ion activity product for hydroxyapatite): pI(HA). Solutions were formulated to minimize variation in pH, which varied by < or =0.03 for a given comparison (individual pI(HA)) and by 0.42-0.82 over the range of pI(HA) within experiments. Lesions on surfaces from which cementum had been ground were significantly deeper than on intact surfaces, but this is considered to be due to subsurface mechanical damage and not to a solubility difference. Neither the concentration of undissociated buffer nor the presence of magnesium ions significantly affected lesion depth. Lesion depth was strongly influenced by the correlated variations in pI(HA) and pH. At pI(HA) 54 and 55, only extremely shallow lesions formed. From pI(HA) 56, lesion depth increased with increasing pI(HA). The results confirm that the solubility of the mineral of root tissues is higher than that of hydroxyapatite, but indicate that it is probably lower than suggested by Hoppenbrouwers et al. [Arch Oral Biol 1987;32:319-322]. For calcium concentrations of 3-12 mM, the critical pH for root tissue mineral was calculated as 5.22-5.66 assuming solubility equivalent to pI(HA) 54 and 5.08-5.51 assuming pI(HA) 55.