Estudo da adição de resíduos de quartzitos para obtenção de grés porcelanato

In States of Paraíba (PB) and Rio Grande do Norte (RN), northeast of Brazil, the most significant deposits of non-metallic industrial minerals are pegmatites, quartzites and granites, which are located in Seridó region. Extraction of clay, quartz, micas and feldspars occurs mainly in the cities of Várzea (PB), OuroBranco (RN) and Parelhas (RN). Mining companies working in the extraction and processing of quartzite generate large volumes of waste containing about 90% SiO2 in their chemical composition coming from quartz that is one of the basic constituents of ceramic mass for the production of ceramic coating. Therefore, this work evaluates the utilization of these wastes on fabrication of high-quality ceramic products, such as porcelain stoneware, in industrial scale. Characterization of raw materials was based on XRF, XRD, GA, TGA and DSC analysis, on samples composed by 57% of feldspar, 37% of argil and 6% of quartzite residues, with 5 different colors (white, gold, pink, green and black). Samples were synthesized in three temperatures, 1150°C, 1200°C and 1250°C, with one hour isotherm and warming-up tax of 10°C/min. After synthesizing, the specimens were submit to physical characterization tests of water absorption, linear shrinkage, apparently porosity, density, flexural strain at three points. The addition of 6% of quartzite residue to ceramic mass provided a final product with technological properties attending technical norms for the production of porcelain stoneware; best results were observed at a temperature of 1200°C. According to the results there was a high iron oxide on black quartzite, being their use in porcelain stoneware discarded by ethic and structural question, because the material fused at 1250°C. All quartzite formulations had low water absorption when synthesized at 1200°C, getting 0.1% to 0.36% without having gone through the atomization process. Besides, flexural strain tests overcame 27 MPa reaching the acceptance limits of the European Directive EN 100, at 1200°C synthesizing. Thus, the use of quartzite residues in ceramic masses poses as great potential for the production of porcelain stoneware.

Desenvolvimento da célula base de microestruturas periódicas de compósitos sob otimização topológica

This thesis develops a new technique for composite microstructures projects by the Topology Optimization process, in order to maximize rigidity, making use of Deformation Energy Method and using a refining scheme h-adaptative to obtain a better defining the topological contours of the microstructure. This is done by distributing materials optimally in a region of pre-established project named as Cell Base. In this paper, the Finite Element Method is used to describe the field and for government equation solution. The mesh is refined iteratively refining so that the Finite Element Mesh is made on all the elements which represent solid materials, and all empty elements containing at least one node in a solid material region. The Finite Element Method chosen for the model is the linear triangular three nodes. As for the resolution of the nonlinear programming problem with constraints we were used Augmented Lagrangian method, and a minimization algorithm based on the direction of the Quasi-Newton type and Armijo-Wolfe conditions assisting in the lowering process. The Cell Base that represents the composite is found from the equivalence between a fictional material and a preescribe material, distributed optimally in the project area. The use of the strain energy method is justified for providing a lower computational cost due to a simpler formulation than traditional homogenization method. The results are presented prescription with change, in displacement with change, in volume restriction and from various initial values of relative densities.

Modelagem multiescala de fenômenos eletrocinéticos em meios porosos carregados eletricamente: aplicação a meios porosos argilosos

In this master thesis, we propose a multiscale mathematical and computational model for electrokinetic phenomena in porous media electrically charged. We consider a porous medium rigid and incompressible saturated by an electrolyte solution containing four monovalent ionic solutes completely diluted in the aqueous solvent. Initially we developed the modeling electrical double layer how objective to compute the electrical potential, surface density of electrical charges and considering two chemical reactions, we propose a 2-pK model for calculating the chemical adsorption occurring in the domain of electrical double layer. Having the nanoscopic model, we deduce a model in the microscale, where the electrochemical adsorption of ions, protonation/ deprotonation reactions and zeta potential obtained in the nanoscale, are incorporated through the conditions of interface uid/solid of the Stokes problem and transportation of ions, modeled by equations of Nernst-Planck. Using the homogenization technique of periodic structures, we develop a model in macroscopic scale with respective cells problems for the e ective macroscopic parameters of equations. Finally, we propose several numerical simulations of the multiscale model for uid ow and transport of reactive ionic solute in a saturated aqueous solution of kaolinite. Using nanoscopic model we propose some numerical simulations of electrochemical adsorption phenomena in the electrical double layer. Making use of the nite element method discretize the macroscopic model and propose some numerical simulations in basic and acid system aiming to quantify the transport of ionic solutes in porous media electrically charged.

Modelagem multiescala de fenômenos eletrocinéticos em meios porosos carregados eletricamente: aplicação a meios porosos argilosos

In this master thesis, we propose a multiscale mathematical and computational model for electrokinetic phenomena in porous media electrically charged. We consider a porous medium rigid and incompressible saturated by an electrolyte solution containing four monovalent ionic solutes completely diluted in the aqueous solvent. Initially we developed the modeling electrical double layer how objective to compute the electrical potential, surface density of electrical charges and considering two chemical reactions, we propose a 2-pK model for calculating the chemical adsorption occurring in the domain of electrical double layer. Having the nanoscopic model, we deduce a model in the microscale, where the electrochemical adsorption of ions, protonation/ deprotonation reactions and zeta potential obtained in the nanoscale, are incorporated through the conditions of interface uid/solid of the Stokes problem and transportation of ions, modeled by equations of Nernst-Planck. Using the homogenization technique of periodic structures, we develop a model in macroscopic scale with respective cells problems for the e ective macroscopic parameters of equations. Finally, we propose several numerical simulations of the multiscale model for uid ow and transport of reactive ionic solute in a saturated aqueous solution of kaolinite. Using nanoscopic model we propose some numerical simulations of electrochemical adsorption phenomena in the electrical double layer. Making use of the nite element method discretize the macroscopic model and propose some numerical simulations in basic and acid system aiming to quantify the transport of ionic solutes in porous media electrically charged.

Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Análise das principais variáveis na flotação industrial do complexo de mineração de Tapira - MG

Faced with an agribusiness expansion scenario and the increase in fertilizer consumption due to the exponential growth of the population, it is necessary to make better use of existing reserves, by obtaining products of better quality and in adequate quantities to meet demand national. In Tapira Mining Complex, Vale Fertilizantes, the phosphate concentrate is produced with content of 35.0% P2O5 from ore with content of about 8.0% P2O5, which are intended to supply Complex Industrial Uberaba and Araxá Minero Chemical Complex for the production of fertilizers. The industrial flotation step responsible for the recovery of P2O5 and hence the viability of the business is divided into the crumbly, grainy and ultrathin circuits, and, friable and granular concentrate comprise the conventional concentrated. Today only 14.7% of the mass which feeds the mill product becomes, the remainder being considered losses in the process, and the larger mass losses are located in the waste of flotation, representing 42.3%. From 2012 to 2014, the daily global mass recovery processing plants varied from 12.4 to 15.9% while the daily metallurgical recovery of P2O5 from 48.7 to 82.4%. By the degree of variability, it appears that the plant operated under different conditions. Seen this, this study aimed to analyze the influence of operational and process variables in P2O5 mass and metallurgical recoveries of industrial flotation circuits of grainy, crumbly and ultrathin. And besides was made an analysis of the effect of ore variables, as degrees, hardnesse and the ore front 02 percentage, in global recoveries of processing plant and the effect of dosages of reagents in the recoveries obtained from the bench flotation using the experimental design methodology. All work was performed using the historical database of Vale Fertilizantes of Tapira-MG, where all independent variables were dimensionless as the experimental range used. To make the statistical analysis it used the response surface technique and the values of the independent variables that maximize recoveries were found by canonical analysis. In the study of industrial flotation circuit crispy were obtained from 41.3% mass recovery and 91.3% metallurgical recovery P2O5, good values for the circuit, and the highest recoveries occur for solids concentration of the new flotation power between 45 and 50%, which values are assigned to the residence time of the pulp in cells and industrial flotation columns. The greater the number of ore heaps resumed on the higher the mass recovery, but in this scenario flotation becomes unstable because there is enormous weight variation in the feed. Higher recoveries are obtained for mass depressant dosage exceeding 120 g / t for synthetic collector dosage of 11.6%. In the study of industrial flotation circuit of the granulate were obtained 28.3% to 79.4% mass recovery and metallurgical recovery of P2O5 being considered good values for the circuit. Higher recoveries are obtained when the front ore 02 percentage is above 90%, because the ore of this front have more clear apatite. Likewise recoveries increase when the level of pulp rougher step is highest due to the high mass of circulating step receives loads. In the analysis of industrial flotation circuit of the ultrafine were obtained 23.95% of mass recovery, and the same is maximized to depressant dosage and the top collector 420 and 300 g / t, respectively. The analysis of the influence of variables ore, it was observed that higher recoveries are obtained for ores with P2O5 content above 8.0%, Fe2O3 content in the order of 28% forward and 02 of ore percentage of 83%. Hard ore percentage has strong influence on recoveries due to mass division in the circuit that is linked to this variable. However, the hard ore percentage that maximizes recoveries was very close to the design capacity of the processing plant, which is 20%. Finally, the study of the bench flotation, has noted that in friable and granular circuits the highest recoveries are achieved for a collector dosage exceeding 250 g / t and the simultaneous increase of collector dosage and synthetic collector percentage contributes to the increase recovery in the flotation, but this scenario is suitable to produce a concentrate poorer in terms of P2O5 content, showing that higher recovery is not always the ideal scenario. Thus, the results show the values of variables that provide higher recoveries in the flotation and hence lower losses in the waste.

Systematic review of Late Jurassic sauropods from the Museu Geológico collections (Lisboa, Portugal)

The Museu Geológico collections house some of the first sauropod references of the Lusitanian Basin Upper Jurassic record, including the Lourinhasaurus alenquerensis and Lusotitan atalaiensis lectotypes, previously considered as new species of the Apatosaurus and Brachiosaurus genera, respectively. Several fragmentary specimens have been classical referred to those taxa, but the most part of these systematic attributions are not supported herein, excluding a caudal vertebra from Maceira (MG 8804) considered as cf. Lusotitan atalaiensis. From the material housed in the Museu Geológico were identified basal eusauropods (indeterminate eusauropods and turiasaurs) and neosauropods (indeterminate neosauropods, diplodods and camarasaurids and basal titanosauriforms). Middle caudal vertebrae with lateral fossae, ventral hollow border by pronounced ventrolateral crests and quadrangular cross-section suggest for the presence of diplodocine diplodocids in north area of the Lusitanian Basin Central Sector during the Late Jurassic. A humerus collected from Praia dos Frades (MG 4976) is attributed to cf. Duriatitan humerocristatus suggesting the presence of shared sauropod forms between the Portugal and United Kingdom during the Late Jurassic. Duriatitan is an indeterminate member of Eusauropoda and the discovery of new material in both territories is necessary to confirm this systematic approach. The studied material is in according with the previous recorded paleobiodiversity for the sauropod clade during the Portuguese Late Jurassic, which includes basal eusauropods (including turiasaurs), diplodocids and macronarians (including camarasaurids and basal titanosauriforms).

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

Obtenção de concentrado proteico do farelo de arroz e avaliação das propriedades químicas e funcionais

Esta dissertação é composta por 5 artigos.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Isolado protéico de farelo de arroz: obtenção, propriedades funcionais e aplicação

O arroz é o segundo cereal mais produzido no mundo e para que ele seja consumido é necessário o processo de beneficiamento, onde é retirada a casca, e com o polimento, o farelo. O farelo, após a retirada do óleo, é utilizado para alimentação animal, mas como corresponde a 8% do grão, são necessárias novas alternativas para o uso do mesmo, uma vez que contém em torno de 17% de proteína. As proteínas do farelo de arroz são consideradas de alta qualidade, hipoalergênicas e anticancerígenas. Devido ao excesso de fibras presentes no farelo, este não é utilizado diretamente na alimentação humana, podendo ser usado como fonte para a obtenção de extratos, concentrados ou isolados. A obtenção do isolado protéico pode ser por via química, que consiste na extração alcalina ou ácida, seguida de precipitação no ponto isoelétrico ou via enzimática, com o uso de enzimas amilolíticas, hemicelulases e carboidrases para a separação das proteínas. O objetivo deste estudo foi obter um isolado protéico a partir de farelo de arroz visando a inclusão deste em produto de panificação. Foi obtido isolado protéico pelo método químico que foi analisado pelo rendimento protéico, pelas propriedades funcionais, perfil aminoacídico, eletroforese e características térmicas. O isolado foi adicionado em bolos em diferentes concentrações sendo avaliado pelas características tecnológicas e sensoriais. O isolado protéico do farelo de arroz (IPFA) que apresentou maior rendimento protéico foi o obtido pelo método químico, com o farelo de granulometria de 42 mesh e desengordurado. Em relação às propriedades funcionais, foi verificado que o IPFA possui maior solubilidade e capacidade de retenção de água em pH 11, alta capacidade emulsificante e alta capacidade de formação de espuma. No aminograma, constatou-se que os aminoácidos encontrados no IPFA atendem as necessidades de bebês e crianças. No perfil eletroforético, o IPFA apresentou 3 grupos de proteínas. Na análise térmica com DSC, o IPFA apresentou alta temperatura de desnaturação e baixo valor de entalpia. Na elaboração dos bolos, à medida que foi adicionado o IPFA, aumentou o teor protéico, o pH e o volume específico e diminuiu o colapso, a luminosidade e a firmeza dos bolos. Na análise sensorial, os bolos com IPFA não apresentaram diferenças estatísticas do bolo controle (sem IPFA). Estes resultados indicam a potencialidade do IPFA em produtos de panificação.

O negro e a diferença nos livros de literatura infantil veiculados no programa nacional biblioteca da escola

O objetivo desta pesquisa é compreender e analisar como o negro vem sendo narrado nos livros de Literatura Infantil veiculados no Programa Nacional Biblioteca da Escola – PNBE para a Educação Infantil e que efeitos de verdade esses discursos vêm produzindo. Utilizo os conceitos de identidade, diferença e raça a partir de uma abordagem pós-estruturalista na intenção de fazer aproximações com o pensamento de Michel Foucault e outros autores desta perspectiva teórica. Os materiais utilizados foram livros de literatura infantil disponibilizados pelo Ministério de Educação do Brasil por meio do Programa Nacional Biblioteca da Escola distribuído no ano de 2012, especificamente para a Educação Infantil. O estudo foi organizado a partir de três movimentos de análise. No primeiro, realizei um mapeamento sobre o acervo geral dos livros disponibilizados pelo Programa na intenção de perceber as temáticas principais destes materiais, os quais permitiram a seleção e o desenvolvimento das especificidades desta pesquisa. No segundo movimento analisei o acervo de livros propostos pelo PNBE buscando o aparecimento de personagens negros, para logo após analisar a forma como são apresentados, tanto como protagonistas das narrações, como no seus silenciamentos. No terceiro movimento busquei analisar como os discursos sobre a diversidade e a diferença são abordados nos livros deste acervo. A análise dos livros me possibilitou perceber a pequena presença de personagens negros nos materiais pesquisados, assim como a universalização dos materiais, tanto em conteúdo como personagens. Cabe destacar que esta pesquisa permitiu olhar como a presença do sujeito negro continua sendo mínima com relação a suas formas de representação, nas quais ainda persistem os silenciamentos quanto à participação deste personagem em comparação com o referencial branco. Pude perceber, também, que os conceitos de diferença e diversidade são tratados como sinônimos em grande parte dos livros analisados, permitindo ver como a produção do discurso sobre a identidade é, muitas vezes, atravessada por uma lógica de universalização e homogeneização dos sujeitos, desconsiderando suas particularidades históricas e culturais que os diferenciam.

Papel das medidas agro-ambientais na gestão da paisagem rural no concelho de Marvão no PNSSM

As paisagens rurais portuguesas construídas e mantidas ao longo dos tempos por sistemas agrícolas tradicionais, estão hoje ameaçadas por motivos tão diversos como o envelhecimento da população, o abandono rural, a intensificação, a homogeneização dos sistemas de produção e a perda de competitividade. Mas apesar destes problemas, estas paisagens agrícolas, suportam ainda várias funções não produtivas, nomeadamente, constituem, um importante suporte de biodiversidade, pelo que a sua manutenção é importante para a conservação destes habitats e espécies. Eventualmente novas formas de gestão destas paisagens devem ser criadas, nomeadamente com base na combinação de várias funções numa perspectiva de multifuncionalidade, através de uma adaptação e integração de políticas públicas. Estando actualmente em discussão o novo programa de Desenvolvimento Rural e a definição das futuras Medidas Agro-Ambientais, e a gestão e o financiamento da Rede Natura 2000, estamos portanto num momento crítico para decisões futuras, que terão forçosamente que interligar, a agricultura, o ambiente e desenvolvimento das zonas rurais portuguesas. Com o intuito de melhor compreender estas problemáticas, em particular, as transformações em curso na paisagem rural, o papel das Medidas Agro-Ambientais e apresentar possíveis soluções, foi efectuado este estudo de caso no concelho de Marvão, concelho típico das áreas marginais agrícolas do interior sul de Portugal. ABSTRACT; The Portuguese rural landscapes built up and kept throughout the times by traditional agricultural systems, are today threatened by so diverse reasons as the ageing of the population, the agricultural abandonment, the intensification, the homogenization of the production systems and the loss of competitiveness. But despite these problems. These agricultural landscapes still support a multitude of non-commodity functions, and particularly they still constitute an important support of biodiversity and thus their maintenance is important for the conservation of these habitats and species. Probably new management forms must be created based on the combination of various functions and the adaptation and integration of public policies. Being currently in discussion the new program of Rural Development and the definition of the future Agri-Environmental Measures, and the management and the financing of the Natura 2000 Network, we are therefore at a critical moment for future decisions that will forcibly have to establish connections, between the agriculture, the environment and the development of the portuguese agricultural areas. With the intention of better understanding these problems and questions, , the transformations taking place in Portuguese peripheric rural areas, and in particular role of the Agri-Environmental Measures, and also for presenting possible solutions, a case study was analyzed in municipality of Marvão, characteristic of the agricultural marginal areas of the interior Southern Portugal.