Atitudes, práticas, barreiras e conhecimentos sobre a avaliação e controlo da dor : eficácia de uma intervenção estruturada a profissionais da saúde

Tese de mestrado, Ciências da Dor, Faculdade de Medicina, Universidade de Lisboa, 2014

Nutritional Evaluation and Optimisation in Neonates: a randomized, double-blind controlled trial of amino acid regimen and intravenous lipid composition in preterm parenteral nutrition

Background: Parenteral nutrition is central to the care of very immature infants. Current international recommendations favor higher amino acid intakes and fish oil–containing lipid emulsions. Objective: The aim of this trial was to compare 1) the effects of high [immediate recommended daily intake (Imm-RDI)] and low [incremental introduction of amino acids (Inc-AAs)] parenteral amino acid delivery within 24 h of birth on body composition and 2) the effect of a multicomponent lipid emulsion containing 30% soybean oil, 30% medium-chain triglycerides, 25% olive oil, and 15% fish oil (SMOF) with that of soybean oil (SO)-based lipid emulsion on intrahepatocellular lipid (IHCL) content. Design: We conducted a 2-by-2 factorial, double-blind, multicenter randomized controlled trial. Results: We randomly assigned 168 infants born at ,31 wk of gestation. We evaluated outcomes at term in 133 infants. There were no significant differences between Imm-RDI and Inc-AA groups for nonadipose mass [adjusted mean difference: 1.0 g (95% CI: 2108, 111 g; P = 0.98)] or between SMOF and SO groups for IHCL [adjusted mean SMOF:SO ratio: 1.1 (95% CI: 0.8, 1.6; P = 0.58]. SMOF does not affect IHCL content. There was a significant interaction (P = 0.05) between the 2 interventions for nonadipose mass. There were no significant interactions between group differences for either primary outcome measure after adjusting for additional confounders. Imm-RDI infants were more likely than Inc-AA infants to have blood urea nitrogen concentrations .7 mmol/L or .10 mmol/L, respectively (75% compared with 49%, P , 0.01; 49% compared with 18%, P , 0.01). Head circumference at term was smaller in the Imm-RDI group [mean difference: 20.8 cm (95% CI: 21.5, 20.1 cm; P = 0.02)]. There were no significant differences in any prespecified secondary outcomes, including adiposity, liver function tests, incidence of conjugated hyperbilirubinemia, weight, length, mortality, and brain volumes. Conclusion: Imm-RDI of parenteral amino acids does not benefit body composition or growth to term and may be harmful. This trial was registered at www.isrctn.com as ISRCTN29665319 and at eudract.ema.europa.eu as EudraCT 2009-016731-34.

Translation and Psychometric Evaluation of a Standard Chinese Version of the Body Appreciation Scale-2

The present study examined the factorial and construct validity of a Standard Chinese translation of the Body Appreciation Scale (BAS-2; Tylka & Wood-Barcalow, 2015b). Participants were 191 women and 154 men from mainland China who were resident in Hong Kong at the time of recruitment. Results of confirmatory factor analysis indicated that the one-dimensional model of the BAS-2, in which all 10 items loaded onto the same factor, had adequate fit and was invariant across sex. Body appreciation scores had good internal consistency and were significantly correlated with self-esteem and life satisfaction, and, in women, with weight discrepancy and body mass index. There were no significant differences in body appreciation scores between women and men. The present findings suggest that the Standard Chinese translation of the BAS-2 has the same one-dimensional factor structure as its parent scale and may facilitate cross-cultural studies of positive body image.

Patrocínio: influência na atitude relativamente à marca e intenção de compra: caso Nike e selecção portuguesa de futebol

Devido à enorme importância que tem sido atribuída ao desporto nas últimas décadas, os marketers abraçam agora totalmente o facto de uma campanha integrada de patrocínio desportivo poder atingir um imensurável número de benefícios. Na verdade, apesar das empresas se comprometerem hoje com muitas outras áreas como a cultura, caridade e domínios humanitários, o desporto continua a ser o campo mais requisitado no que ao patrocínio se refere. Para muitas organizações o patrocínio desportivo é, de facto, o elemento-chave de uma comunicação integrada de marketing. Devido então a todo este enfase dado ao desporto, decidimos verificar se a relação de patrocínio entre a marca Nike e a Selecção Portuguesa de Futebol (SPF) influencia a atitude relativamente à marca e a intenção de compra dos seus produtos, o que constitui o objectivo desta investigação. Assim, tendo como ponto de partida a questão: exercerá a relação de patrocínio entre a Nike e a SPF alguma influência na atitude relativamente à marca e sua intenção de compra? E, por meio de uma revisão da literatura referente a este tema, desenvolvemos um modelo conceptual, o qual é baseado no criado por Martensen et al (2007) e integra quatro principais conceitos: envolvimento, atitudes, intenção de compra e congruência entre a marca e o evento. O presente estudo emprega um design exploratório envolvendo uma colecta de dados quantitativos, através da aplicação de um questionário online. De modo a confirmarmos o modelo proposto, duas técnicas estatísticas foram utilizadas: análise factorial e análise de equações estruturais (AEE). As conclusões desta investigação podem fornecer directivas para a compreensão de como uma relação de patrocínio pode criar ou melhorar a atitude relativamente a uma marca e sua intenção de compra. Como principal resultado, podemos destacar a existência de uma influência positiva da relação de patrocínio na atitude relativamente à marca.

Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry

In this paper the adequacy and the benefit of incorporating glass fibre reinforced polymer (GFRP) waste materials into polyester based mortars, as sand aggregates and filler replacements, are assessed. Different weight contents of mechanically recycled GFRP wastes with two particle size grades are included in the formulation of new materials. In all formulations, a polyester resin matrix was modified with a silane coupling agent in order to improve binder-aggregates interfaces. The added value of the recycling solution was assessed by means of both flexural and compressive strengths of GFRP admixed mortars with regard to those of the unmodified polymer mortars. Planning of experiments and data treatment were performed by means of full factorial design and through appropriate statistical tools based on analyses of variance (ANOVA). Results show that the partial replacement of sand aggregates by either type of GFRP recyclates improves the mechanical performance of resultant polymer mortars. In the case of trial formulations modified with the coarser waste mix, the best results are achieved with 8% waste weight content, while for fine waste based polymer mortars, 4% in weight of waste content leads to the higher increases on mechanical strengths. This study clearly identifies a promising waste management solution for GFRP waste materials by developing a cost-effective end-use application for the recyclates, thus contributing to a more sustainable fibre-reinforced polymer composites industry.

Avaliação da satisfação do utente na comunicação com os profissionais de saúde construção e validação de um instrumento

A satisfação do utente na comunicação com profissionais de saúde é um indicador de qualidade dos serviços ou instituições. Na literatura não encontramos instrumentos padronizados e validados, que avaliem a satisfação do utente na comunicação com os profissionais de saúde. O presente estudo tem como objetivo construir e validar um instrumento para avaliar a satisfação do utente na comunicação com os profissionais de saúde. Desenvolvemos este estudo em três ciclos. Um primeiro, revisão da literatura, para identificar dimensões e itens da comunicação interpessoal na saúde. No segundo ciclo, conduzimos um método de Delphi modificado em três rondas, com recurso à plataforma informática de questionários Survey Monkey, no qual participou um painel de 25 peritos; estabelecemos como critério mínimo de retenção para a ronda seguinte os itens que recebessem 70% do consenso por parte do painel. Após as três rondas, obtivemos um instrumento com seis dimensões comunicacionais (comunicação verbal, comunicação não verbal, empatia, respeito, resolução de problemas e material de apoio), vinte e cinco itens específicos, e mais seis dimensões genéricas, que avaliam cada uma das dimensões. No terceiro ciclo avaliamos as características psicométricas, em termos de sensibilidade, validade do construto e fidelidade, numa amostra de 348 participantes. Os resultados mostram que todas as categorias de resposta estavam representadas em todos os itens. Validade do construto- a análise fatorial identificou uma solução de seis componentes que explicam 71% da variância total. Fiabilidade - os valores da correlação item-total variam entre 0,387 e 0,722, existindo uma correlação positiva moderada a forte. O valor de alfa de Cronbach (α=0,928) indica que a consistência interna é excelente. O instrumento construído apresenta boas propriedades psicométricas. Fica assim disponível uma nova ferramenta para auxiliar na gestão e no processo de planeamento necessários ao incremento da qualidade nos serviços e instituições de saúde.

New recycling approaches for thermoset polymeric composite wastes – an experimental study on polyester based concrete materials filled with fibre reinforced plastic recyclates

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.

Hybrid thermoset polymeric composites – an Innovation towards sustainability

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.

New end-use application for GFRP recyclates as reinforcement for concrete-polymer materials’

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one-factor-at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and filler replacements for polymer mortar, with significant gain of mechanical properties with regard to non-modified polymer mortars.

Design of experiments applied to the mix design process of polymer mortar materials modified with GFRP recyclates

In this work, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behavior of polyester polymer mortar (PM) materials was assessed. For this purpose, different contents of GFRP recyclates (between 4% up to 12% in mass), were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of silane coupling agent addition to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers, jointly with unfinished products and scrap resulting from pultrusion manufacturing process, are landfilled, with supplementary added costs. Thus, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and reinforcement for PM materials, with significant improvements on mechanical properties with regard to non-modified formulations.

Adesão ao regime terapêutico na pessoa com enfarte agudo do miócardio: contributo dos enfermeiros no internamento hospita

RESUMO: O Enfarte Agudo do Miocárdio (EAM) representa um dos principais problemas de saúde pública em Portugal. A rápida intervenção nos factores de risco determinantes da saúde cardíaca pode ter um impacto positivo em vários indicadores de saúde. O objectivo final dessa intervenção passa por capacitar a pessoa, para que, autonomamente, adopte um conjunto de comportamentos de saúde, baseados em estilos de vida protectores da saúde cardíaca, que favorecem positivamente o processo de reabilitação. Esta procura e aquisição do comportamento de saúde, adesão ao regime terapêutico, deve ser desenvolvido em parceria com os profissionais de saúde. O hospital representa a porta de entrada da pessoa com EAM no sistema de saúde. É neste contacto que se inicia uma intervenção de sensibilização e promoção da adesão ao regime terapêutico. Sendo os enfermeiros um grupo profissional que estabelece uma relação continua com a pessoa, importa conhecer um conjunto de dimensões do desempenho dos enfermeiros na promoção da adesão ao regime terapêutico. Breve referência ao desenho de estudo. Foram incluídas no estudo 143 enfermeiros de 9 serviços hospitalares da Região de Saúde de Lisboa e Vale do Tejo. Os dados foram obtidos através de um questionário auto-preenchido. Os dados mostraram que a população de enfermeiros é jovem (M= 30,5: dp= 8,0), 49% têm uma idade £ 26 anos e apresenta pouca experiência profissional (M=7,7; dp= 7,6), 48,2% exerce a profissão há menos de 3 anos. A antiguidade no serviço actual é reduzida (M= 4,7; dp= 4,6), 48,9% estão no serviço há menos de 2 anos. Os enfermeiros acreditam que deviam intervir com mais frequência nos factores de risco fisiológicos e comportamentais que nos factores psicossociais e ambientais; a confiança que têm nas capacidades para intervir nos factores de risco fisiológicos e comportamentais é maior que nos factores psicossociais e ambientais e no último ano, intervieram mais frequentemente nos factores de risco fisiológicos e comportamentais que nos psicossociais e ambientais. O “ensaio” da validação da escala de Will scale de Anderson et al (2004), sobre a capacidade de intervenção na saúde cardíaca, mostrou que o teste de Esfericidade de Bartlett e Medida de adequação da amostragem de Kaiser-Meyer- Olkin (KMO) permitiram a realização da análise factorial em componentes principais (AFCP). Da AFCP emergiram 16 factores, os mesmos que no estudo original de Anderson et al (2004), que revelaram boa consistência interna, com valores de alpha de Cronbach que variaram entre 0,71 a 0,98. Os resultados revelam a necessidade de sensibilizar os enfermeiros para valorizar a intervenção no âmbito dos factores de risco psicossociais e ambientais para promover a adesão ao regime terapêutico. Sugerem ainda que a intervenção baseada na evidência pode ser potenciada de forma a melhorar as práticas de cuidados dos enfermeiros. ABSTRACT: Myocardial infarction (MI) is one of the most important problems in public health in Portugal. A prompt intervention in cardiac health determinants means a positive impact in health outcomes, individually and collectively. The main purpose of this intervention lays on patient’s empowerment so he or she becomes able to choose healthy behaviours, based on heart health protective life styles, and therefore to manage his/hers therapeutic regime. This search and acquisition of health behaviours leading to therapeutic regime adherence may positively have an influence on the whole rehabilitation process and it must be developed in partnership with health workers. MI patients’ first contact with the Health System usually happens at the Hospital. Here the first steps are taken to start an intervention in order to promote therapeutic regime adherence. Nurses are a group of health workers who establish a unique and continuous relation with patients, so it matters to have knowledge of their performance skills that can actually promote a healthy behaviours and increase therapeutic regime adherence. Short Study design The study sample includes 143 nurses working on 9 different hospital wards, belonging to the Lisboa and Tejo’s Valley Health Region, in the district of Lisbon. Data were collected trough a self-administered questionnaire. It revealed that the nurses sample is a young population (M=30,5; dp=8,0), 49% of whom are aged less than 26 years old and has little professional experience (M=7,7; dp= 7,6); 48,2% work has nurses for less than 3 years. There’s a low percentage of seniority (M=4,7; dp=4,6), 48,9% of nurses work in these wards for less than 2 years. Nurses believe they should have intervene more frequently in physiological and behaviour risk factors than in psychological, social and environmental factors; they have greater confidence in their ability to intervene in physiological and behaviour risk factors than to intervene in psychological, social and environmental factors. In last year they took interventions more frequently in physiological and behaviour risk factors than in the other health determinants. The Scale Validation “essay” on Will Scale (Anderson et al, 2004), about heart health intervention capacity, revealed that the Bartlett’s test sphericity and the Kaiser-Meyer- Olkin’s (KMO) appropriate sample measure allowed the factorial analysis on main components (FAMC). From FAMC emerged 16 factors, the same number found on Anderson’s et al (2004) study, revealing good internal consistence, with Cronbach’s alpha values that varied between 0,71 and 0,98. The results point a need for nurses to attribute bigger value to other health determinants intervention - such as psychological, social and environmental determinants - so they’ll take part in promoting therapeutic regime adherence. The results also suggest t

Re-Use Assessment of Thermoset Composite Wastes as Aggregate and Filler Replacement for Concrete-Polymer Composite Materials: A case study regarding GFRP pultrusion wastes

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.

Minimização do impacto ambiental do processo de curtume de pele de bovino

O presente trabalho teve como objectivo a minimização do impacto ambiental do processo de curtume da pele de bovino. A indústria de curtumes transforma a pele, material putrescível, em couro, material nobre, termicamente estável e imputrescível. A transformação da pele em couro origina uma carga poluente apreciável quer quanto a efluentes líquidos quer quanto a resíduos sólidos. O fluxo produtivo da indústria de curtumes pode dividir-se em quatro sectores: ribeira, curtume, tinturaria e acabamento, sendo que os três primeiros geram efluentes líquidos com elevada carga poluente. Neste trabalho, foram avaliadas as fases do processo que geram efluentes líquidos: molho, caleiro, curtume e tinturaria. Na avaliação do processo do molho testou-se uma protease e uma lipase contra um molhante e um desengordurante tradicional, agentes químicos normalmente utilizados no molho mas menos biodegradáveis que as enzimas testadas. Salienta-se o bom resultado obtido quanto à eficiência do molho Na avaliação do processo de caleiro testaram-se várias alternativas no sentido da redução da quantidade de sulfureto de sódio utilizada e da minimização da carga poluente. Entre as alternativas, depilação por oxidação, depilação enzimática com e sem destruição do pêlo, elegeu-se a depilação enzimática sem destruição do pêlo que conduziu a resultados com menor impacto ambiental, nomeadamente a redução da % da quantidade de sulfureto de sódio, sendo a redução da carga poluente de 4,19 % de sulfureto, 32.80% de sólidos suspensos totais (SST),27.09% de sólidos totais (ST) e de 76.90% da carência química de oxigénio (CQO) no efluente de caleiro. No processo do curtume da pele é utilizado crómio como agente de curtume em cerca de 80% das peles tratadas, sendo este metal problemático em termos ambientais. No sentido de reduzir a quantidade de crómio utilizada no processo foi realizado um planeamento factorial onde as variáveis a estudar foram a concentração de crómio e a temperatura, tendo este como objectivo observar qual a quantidade mínima de crómio necessária para termos um produto final nas condições desejadas e gerando um menor impacto ambiental. Concluiu-se desenvolvendo um processo que mostra ser possível reduzir a quantidade de sal de crómio de 7% para 5%, além de ter um impacto ambiental claramente menos agressivo nos efluentes de curtume gerado. Este processo quando comparado com o processo tradicional permite a redução de 27% na CQO, 79% nos SST, 11% nos ST e 38% no teor de crómio Na avaliação do processo de tinturaria foi estudado um processo compacto contra o processo tradicional, tendo-se concluído pelo menor impacto ambiental do processo estudado, nomeadamente ao nível da redução do consumo de água e da carga poluente gerada. A comparação dos dois processos, no que respeita à carga poluente gerada, permitiu concluir por uma redução de 39% da CQO, 50% dos SST, e 12% dos ST quando aplicado o processo compacto Por fim foi feita uma avaliação do impacto ambiental do efluente global gerado pelos processos considerados com menor impacto ambiental contra o processo tradicional, normalmente aplicado na indústria. A aplicação do conjunto dos processos desenvolvidos, quando comparada com a aplicação do conjunto dos processos tradicionais, mostra uma redução de 1% no sulfureto, 40% na CQO, 60 % nos SST, 42 % no crómio e 11% nos ST, mostrando claramente que é possível reduzir a carga poluente da indústria de curtumes atuando no processo. Este trabalho mostrou a importância de atuar no processo para minimizar os custos de tratamento e mesmo de investimento dos efluentes da indústria de curtumes. Importa salientar que os processos desenvolvidos necessitam de validação a uma escala semi-industrial.