990 resultados para Combinações (Matematica)
Resumo:
O presente trabalho tem como objectivo principal a realização de um estudo do efeito do ganho das antenas nas perdas de percurso de uma ligação na banda de frequência ISM (Insdustrial Scientific and Medical) nos 2,4 GHz. Para tal, foram utilizadas 14 antenas de 7 tipos diferentes (2 monopolo, 2 colineares, 2 grelhas, 2 Yagi, 2 painéis, 2 parabólicas e 2 helicoidais) com ganhos a variar desde os 1,3 a 23 dBi. Inicialmente, obtiveram-se os parâmetros fundamentais das antenas utilizadas, nomeadamente o diagrama de radiação e o ganho. Desenvolveu-se um sistema, que permite a medição do diagrama de radiação de forma automática através de um motor passo a passo. Uma aplicação desenvolvida em ambiente Matlab realiza o controlo do motor e desenha o respectivo diagrama em tempo real. Para a realização das medições da propagação do sinal desenvolveu-se um sistema que interliga a antena receptora a um computador portátil através de um analisador de espectros. À medida que as medições são efectuadas, a atenuação do sinal em função da distância é determinada e apresentada graficamente no computador sendo, ainda, representada a atenuação esperada no espaço livre. Para isto, implementou-se uma aplicação em ambiente Matlab que faz o tratamento e representação dos dados. Tendo-se conhecimento dos parâmetros das antenas, e com o sistema de medição implementado, passou-se às medições da propagação do sinal em diferentes meios, tais como, meio sem obstáculos, meio urbano, meio florestal caracterizado por troncos no percurso de propagação e meio florestal caracterizado por folhagem no percurso de propagação. Em cada meio foram efectuadas medições para 37 combinações de antenas, com ganhos conjuntos a variar desde os 2,6 até o 46 dBi. As medições foram efectuadas com a colocação da antena emissora numa posição fixa e com o afastamento da antena receptora em intervalos de 5 metros, até os 150 metros, seguindo a linha de máxima radiação entre ambas as antenas. Ainda, para os meios sem obstáculos e florestais, foram efectuadas medições para dois ângulos em relação à linha indicada, sendo estes de 30° e 330°, respectivamente. Com base nos resultados obtidos, verificou-se um aumento da atenuação à medida que se passou para meios mais obstruídos, sendo que, para o meio sem obstáculos a atenuação aproxima-se da curva do espaço livre. No meio urbano observou-se que a atenuação aumentou ligeiramente. No entanto, esta não é muito significativa quando comparada com a atenuação no espaço livre. Por último, notou-se um grande aumento da atenuação nos meios florestais, ao nível dos troncos e da vegetação, sendo superior para esta última. Relativamente às antenas, verificou-se que existe um aumento da atenuação na medida que o ganho destas aumenta, sendo mais visível para meios com maior obstrução (florestais). Para a situação em que as antenas encontram-se com desvios de 30° e 330°, verificou-se que este aumento é mais significativo para as antenas directivas (ganhos superiores).
Resumo:
The employment of flexibility in the design of façades makes them adaptable to adverse weather conditions, resulting in both minimization of environmental discomfort and improvement of energy efficiency. The present study highlights the potential of flexible façades as a resource to reduce rigidity and form repetition, which are usually employed in condominiums of standardized houses; as such, the work presented herein contributes to field of study of architectural projects strategies for adapting and integrating buildings within the local climate context. Two façade options were designed using as reference the bionics and the kinetics, as well as their applications to architectural constructions. This resulted in two lightweight and dynamic structures, which cater to constraints of comfort through combinations of movements, which control the impact of solar radiation and of cooling in the environment. The efficacy and technical functionality of the façades were tested with comfort analysis and graphic computation software, as well as with physical models. Thus, the current research contributes to the improvement of architectural solutions aimed at using passive energy strategies in order to offer both better quality for the users and for the sustainability of the planet
Resumo:
This master thesis aims to assess the influence of the design decisions on the energy building performance of hotels. The research is based on the integration of field study and computer simulation. Firstly, a detailed field study is carried out to identify the characteristics of hotels in Natal, Rio Grande do Norte. The items assessed are occupancies, light and equipment densities, types of air conditioning, total and monthly energy consumption, among others. A second and more comprehensive field study is carried out to identify the range of occurrence of architectural variables, with a larger number of buildings. A base case is modelled in VisualDOE, based on the first field study. Then, a first set of simulations are run to explore the sensitivity of the variables on the energy consumption. The results analyses were the base of a second set of simulations, which combined the most influential variables. The results of 384 models were assessed, and the impacts of design decisions were quantified. The study discusses tendencies and recommendations, as well as the methods advantages and disadvantages
Resumo:
The aim of this study was to test the sediment preference of L. vannamei shrimp. It was observed shrimp visit frequency, swimming and burying behaviour at different sediment compositions for 24h. Juvenile (0.93 ± 0.29g) and sub-adult shrimps (10.0 ± 1.18g) were obtained from the aquaculture station at Universidade Federal Rural do Semi-Árido UFERSA, and held in a plastic tank (water volume 500 L) supplied with aerated water and kept at constant temperature, pH, and salinity. Shrimp was fed by commercial shrimp dry food. The experimental substrates were composed by A: medium sand + thick sand + very thick sand + gravel; B: very fine sand + fine sand; and C: silt + clay. Thus, six different substrate combinations were tested: A, B, C, A+B, A+C, B+C. To test preference, it was used a cylindrical tank (40 l) divided into six differently substrate compartments. A single shrimp was introduced each tank and the frequency at which this shrimp visited each compartment was recorded over a 24h study period. It was tested 54 shrimp (18 sub-adult males, 18 subadult females and 18 juveniles). For each trial, sediment and water were changed to avoid pheromones and residues influence. Shrimp were weighted and sub-adults were divided by sex: males present petasma and females present thelycum. Data were collected on the experimental day at 19:30; 20:30; 00:30; 1:30; 05:30; 06:30; 13:30 and 14:30 h. At each time point, shrimp were observed for 20-min periods, in which we noted down which compartment the shrimp was occupying at 2-min intervals. Thus, for each period we had eleven observations (88 observations per day). For observations at night, it was used dim red light that did not affect shrimp behaviour. At each 20-min period, it was observed visit frequency in each substrate, if shrimp was burred or not or if it was swimming. There was not significant difference between light and dark burry activity for females. Swimming activity was significantly higher at night, mainly at 00:30 and 01:30 h. All L. vannamei shrimp showed preference for sediment B. This animal presents cyclic activity, spends the day light period buried and swims at night
Resumo:
Plasma diagnostics by Optical Emission Spectroscopy were performed for electrical discharge in three gas mixture respecting the combinations z N2 y Ar x H2, z N2 y Ar x O2 e z N2 y Ar x CH4, in which the indexes z and y systematically vary from 1 to 4 and x varies from 0 to 4, every one has dimension SCCM, resulting in 80 combinations. From the all obtained spectrums, the species CH (387,1 nm), N2+ (391,4 nm), Hβ (486,1 nm), Hα (656,3 nm), Ar (750,4 nm), O (777,4 nm) e O (842,6 nm) were analyzed because of their abundance and importance on the kinetic of reaction from the plasma to surface, besides their high dependences on the gases flows. Particularly interesting z, y and x combinations were chosen in order to study the influence of active species on the surface modification during the thermochemical treatment. From the mixtures N2 Ar O2 e N2 Ar CH4 were chosen three peculiar proportions which presented luminous intensity profile with unexpected maximum or minimum values, denominated as plasma anomaly. Those plasma concentrations were utilized as atmosphere of titanium treatment maintaining constant the control parameters pressure and temperature. It has been verified a relation among luminous intensity associated to N2+ and roughness, nanohardness and O atoms diffusion into the crystalline lattice of treated titanium and it has been seen which those properties becomes more intense precisely in the higher points found in the optical profile associated to the N2+ specie. Those parameters were verified for the mixture which involved O2 gas. For the mixture which involves CH4 gas, the relation was determinate by roughness, number of nitrogen and carbon atoms diffused into the titanium structure which presented direct proportionality with the luminous intensity referent to the N2+ and CH. It has been yet studied the formation of TiCN phases on the surface which presented to be essentially directly proportional to the increasing of the CH specie and inversely proportional to the increasing of the specie N2+
Resumo:
One of the main activities in the petroleum engineering is to estimate the oil production in the existing oil reserves. The calculation of these reserves is crucial to determine the economical feasibility of your explotation. Currently, the petroleum industry is facing problems to analyze production due to the exponentially increasing amount of data provided by the production facilities. Conventional reservoir modeling techniques like numerical reservoir simulation and visualization were well developed and are available. This work proposes intelligent methods, like artificial neural networks, to predict the oil production and compare the results with the ones obtained by the numerical simulation, method quite a lot used in the practice to realization of the oil production prediction behavior. The artificial neural networks will be used due your learning, adaptation and interpolation capabilities
Resumo:
The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant
Resumo:
O objetivo desse estudo foi determinar a tolerância de banana (Musa spp.) 'Prata-Anã' (AAB) e do fungo Colletotrichum musae à termoterapia no controle de podridões em pós-colheita. Experimentos in vivo e in vitro foram instalados em delineamento inteiramente casualizado, seguindo um esquema fatorial 4x5 (temperatura x tempo). Os tratamentos consistiram na imersão dos frutos (buquês) e do fungo (esporos e micélio) em água aquecida a 47, 50, 53 e 56 ºC, durante 0, 3, 6, 9 e 12 min. A exposição dos frutos a 56 ºC durante 9 min causou escurecimento da casca nas extremidades dos frutos, porém, as características físicas e químicas dos frutos não foram alteradas pelos tratamentos. Frutos inoculados e tratados a 56 ºC durante 6 min não apresentaram podridões nem escurecimento da casca, enquanto aqueles não tratados apresentaram 64% da área lesionada / fruto. A partir das combinações 53 ºC / 9 mi. e 56 ºC / 3 min a germinação de esporos foi reduzida para 4% e 0%, respectivamente. A combinação 56 ºC / 12 min reduziu, mas não paralisou o crescimento micelial. O tratamento 56 ºC / 6 min retardou mas não paralisou o crescimento micelial in vitro, porém foi efetivo no controle completo das podridões in vivo. Esse tratamento evitou a manifestação de podridões no inverno (maio), mas não no verão (novembro), mostrando-se influenciado pelas condições climáticas próximas à colheita dos cachos. A termoterapia pode ser recomendada para controle de podridão em pós-colheita de banana devendo ser ajustada para diferentes estações do ano.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Os objetivos deste trabalho foram determinar a herança da resistência ao complexo de enfezamento em milho e determinar as melhores fontes de resistência entre as linhagens estudadas. Foram realizadas as análises dialélica e médias de gerações em linhagens de milho. Para a análise dialélica, foram cruzadas 12 linhagens de milho, em dialélico parcial. Para análises de médias de gerações, foram cruzadas três linhagens resistentes e quatro suscetíveis, para a obtenção das gerações F1, F2, RCP R e RCP S. Os trabalhos foram conduzidos em Jaboticabal, SP. A incidência de enfezamento foi avaliada no estádio fenológico R3. Efeitos significativos quanto à capacidade geral de combinação e capacidade específica de combinação foram obtidos, o que indicou que, no controle do caráter enfezamentos, estão envolvidos tanto os efeitos aditivos quanto os de dominância. Análises de médias de gerações mostraram a presença de poucos genes envolvidos com o controle da resistência, com predominância de efeitos aditivos, o que permite a seleção de genótipos resistentes. As linhagens L02, L03 e L05 poderão ser utilizadas como fontes de resistência, em futuras combinações híbridas.
Resumo:
O objetivo deste trabalho foi avaliar os efeitos da adubação fosfatada nas relações de interferência inicial entre plantas de milho e de tiririca. Para isso, foi montado um experimento em vasos de 90 L, preenchidos com substrato constituído por areia, terra e substrato Plantmax®. Os tratamentos constaram de combinações de colonização dos vasos por milho e/ou por tiririca nas densidades iniciais de 25 e 50 tubérculos por vaso; essas situações de colonização foram estabelecidas em três condições de adubação fosfatada adicional: 0, 100 e 300 ppm de fósforo. No campo, os vasos foram dispostos no delineamento inteiramente casualizado, com quatro repetições. As relações de interferência entre plantas de milho e de tiririca foram alteradas pela fertilização fosfatada do solo. O milho teve excelente aproveitamento do enriquecimento do solo pelo fósforo e interferiu mais decisivamente sobre a tiririca nos vasos bem fertilizados com esse elemento. Nessas condições, o milho reduziu drasticamente a resposta da tiririca à fertilização fosfatada, em termos de crescimento da parte aérea. A interferência da tiririca reduziu a altura das plantas de milho, a expansão da área foliar e o acúmulo de matéria seca na parte aérea.
Resumo:
Of all of the genes associated with the development of Diabetes mellitus type 1 (T1D), the largest contribution comes from the genes in the Human Leukocyte Antigen (HLA) region, mostly the class II DR e DQ genes. Specific combinations of alleles DRB1, DQA1 and DQB1 constituting haplotypes, and further, a combination of more than one haplotype, providing multilocus genotypes are associated with susceptibility, protection and neutrality to DM1. Thus, the aim of present study was to verified the association of polymorphisms of HLA genes class II with susceptibility to type 1 diabetes mellitus (T1D). Ninety-two patients with T1D and 100 individuals normoglycemics (NG) aged between 6 and 20 years were studied. Genomic DNA was obtained from peripheral whole blood, collected in EDTA tube, using the extraction kit Illustra Triple Prep®, GE Healthcare. For HLA typing was used DNA LABType system by One Lambda kit applying Luminex® technology to the method of PCRSSO typing reverse. The alleles DRB1*03:01, *04:05, *04:01, *04:02, DQA1*03:01g, *05:01g, DQB1*02:01g, *03:02, the haplotypes DRB1*03:01-DQA1*05:01-DQB1*02:01, DRB1*04:05-DQA1*03:01g-DQB1*03:02, DRB1*04:02-DQA1*03:01g-DQB1*03:02, DRB1*04:01-DQA1*03:01g-DQB1*03:02 and DR3-DQ2/DR4-DQ8 genotype were significantly associated with the chance of developing T1D. The alleles DRB1*11:01, *15:03, *15:01, *13:01, DQA1*01:02, *04:01g, *01:03, DQB1*06:02, *03:01g, *06:03, *04:02, the haplotypes DRB1*11:01-DQA1*05:01-DQB1*03:01, DRB1*13:01-DQA1*01:03-DQB1*06:03 and DRX-DQX/DRX-DQX genotype, formed by other than the DR3-DQ2 or DR4-DQ8 haplotypes, were significantly associated with T1D protection Despite the major racial Brazilian, even at the regional level, these results are similar to the majority of alleles, genotypes and haplotypes of HLA class II-related susceptibility or resistance to T1D, extensively described in the literature for Caucasian population. Children with age at diagnosis less than 5 years of age had significantly higher frequency of the heterozygous genotype DR3-DQ2/DR4-DQ8 compared to children with age at diagnosis than 5 years old. These results also demonstrate strong association of the genetic profile of the class II HLA for this age group, possibly associated with the severity and rapid progression to the onset of T1D. The knowledge of HLA class II genes may be useful in genetic screens that allow the prediction of T1D
Resumo:
Mimosa caesalpiniaefolia Benth. is a forest species of the Mimosaceae family, recommended for recovery of degraded areas. The evaluation of vigor by biochemical tests have been an important tool in the control of seed quality programs, and the electrical conductivity and potassium leaching the most efficient in the verifying the physiological potential. The objective, therefore, to adjust the methodology of the electrical conductivity test for seeds of M. caesalpiniaefolia, for then compare the efficiency of this test with the potassium in the evaluation of seed vigor of different lots of seeds M. caesalpiniaefolia. To test the adequacy of the electrical conductivity were used different combinations of temperatures , 25 °C and 30 ºC, number of seeds , 25 and 50, periods of imbibition , 4 , 8 , 12 , 16 and 24 hours , and volumes deionized water, 50 mL and 75mL. For potassium leaching test, which was conducted from the results achieved by the methodology of the adequacy of the electrical conductivity test, to compare the efficiency of both tests , in the classification of seeds at different levels of vigor, and the period 4 hours also evaluated because the potassium leaching test can be more efficient in the shortest time . The best combination obtained in experiment of electrical conductivity is 25 seeds soaked in 50 mL deionized or distilled water for 8 hours at a temperature of 30 ° C. Data were subjected to analysis of variance, the means were compared with each other by F tests and Tukey at 5 % probability, and when necessary polynomial regression analysis was performed. The electrical conductivity test performed at period eight hour proved to be more efficient in the separation of seed lots M. caesalpiniaefolia at different levels of vigor compared to the potassium test
Resumo:
O trabalho foi conduzido na UNESP, Jaboticabal-SP, de setembro/2003 a janeiro/2004, com objetivo de avaliar a viabilidade da consorciação de pimentão com as culturas de repolho, rúcula, alface e rabanete. O experimento constou de 15 tratamentos, correspondentes a 10 cultivos consorciados (combinações das cinco hortaliças) e cinco monocultivos. Utilizou-se o delineamento experimental em blocos casualizados, com seis repetições. Foram utilizados os híbridos Magali R e Kenzan, respectivamente, para pimentão e repolho; e as cultivares Vera, Cultivada e Crimson Gigante, respectivamente, para alface, rúcula e rabanete. As produtividades de pimentão e repolho em cultivo consorciado não diferiram significativamente das obtidas em monocultivo. Maior massa fresca de parte aérea de plantas de alface (438,86 g/planta) foi observada quando a alface foi consorciada com pimentão, diferindo estatisticamente dos demais cultivos que obtiveram em média 323,05 g/planta de alface. Aumento na produtividade de raízes comerciais de rabanete foi observado quando consorciado com pimentão, porém, foi significativamente superior apenas ao cultivo consorciado de pimentão+repolho+rabanete. A massa fresca da parte aérea da rúcula mostrou diferença estatística apenas entre os consórcios de pimentão+rúcula+alface e pimentão+repolho+rúcula. Exceto o consórcio pimentão+repolho que obteve índice de uso eficiente da terra (UET) de 1,92; todos os outros consórcios apresentaram UET superior a 2,0, com maior UET (2,64) obtido no consórcio pimentão+alface. A superioridade de 92 a 164% na produção de alimento por área dos consórcios sobre os monocultivos, demonstra a viabilidade dos policultivos e maior eficiência do uso da terra.
Resumo:
Avaliou-se a produtividade de grupos de alface e da rúcula, em consórcio, em relação aos seus cultivos solteiros, na UNESP Jaboticabal, em condições de campo, em duas épocas de cultivo, maio a agosto e setembro a novembro de 2001, sob delineamento de blocos casualizados, com quatro repetições. Os tratamentos constaram de combinações dos fatores grupos de alface (crespa, cv. Vera; lisa, cv. Elisa e americana, cv. Tainá), sistemas de cultivo (consórcio e cultivo solteiro) e épocas de semeadura da rúcula para o estabelecimento do consórcio [0; 7 e 14 dias após o transplante (DAT) da alface]. As maiores matérias fresca e seca de alface foram obtidas na primavera, com destaque para a alface americana. As alfaces não foram afetadas pelo sistema de cultivo. A maior matéria fresca de rúcula, no outono-inverno, foi obtida em consórcio, a 0 DAT, com as alfaces crespa e lisa e, aos 7 DAT com americana, enquanto na primavera, quando foi consorciada aos 7 DAT com alface crespa e a 0 DAT com alfaces do grupo lisa e americana. A rúcula teve sua matéria seca reduzida nos consórcios estabelecidos tardiamente, aos 14 DAT. Os cultivos consorciados apresentaram-se superiores aos cultivos solteiros entre 5 e 93%, segundo o índice de uso eficiente da terra. Os maiores índices de uso eficiente da terra foram obtidos com os consórcios de rúcula e alface crespa a 0 DAT (1,93), no outono-inverno e pelas mesmas hortaliças aos 7 DAT (1,84), na primavera.