Quality of essential drugs in tropical countries: evaluation of antimalarial drugs in the Brazilian Health System

INTRODUCTION: The emergence of drug resistance is one of the main problems concerning malaria treatment. The use of counterfeit and/or substandard antimalarial drugs can contribute to the development of parasite resistance. Thus, the aim of this study was to evaluate the quality of antimalarial drugs distributed in Brazil. METHODS: Samples containing chloroquine phosphate, mefloquine hydrochloride, primaquine phosphate, and quinine sulfate tablets were delivered to the Rio de Janeiro central storeroom (CENADI), state storerooms (SS), and Basic Health Units (BHUs) in the north region of Brazil - a total of 10 sample sets. After 5 months of storage, the samples were collected, and in vitro quality control analyses according to official and published methods were performed. RESULTS: Inadequate drug storage conditions were found in two SS and in all BHUs evaluated. There were no quality deviations found in the chloroquine samples. The quinine samples exhibited weight variation above the allowed limits. The primaquine samples were found to have packaging deficiency. The release of mefloquine in samples from some regions showed a statistically significant difference when compared with the CENADI samples. CONCLUSIONS: It is important to periodically evaluate the quality and storage conditions of essential drugs. The quality deviations found with the primaquine and quinine samples are not related to storage conditions and must be addressed urgently. The decreased mefloquine release from tablets is related to formulation problems or influenced by inadequate storage conditions, prompting further investigation. Even with the mentioned problems, the samples would probably not contribute to resistant parasite selection.

Viscofan SA: Equity research

UNL - NSBE

Ethical consumption (in)decisons

Consumers’ indecisions about the ethical value of their choices are amongst the highest concerns regarding ethical products’ purchasing. This is especially true for Fair Trade certified products where the ethical attribute information provided by the packaging is often unacknowledged by consumers. While well-informed consumers are likely to generate positive consumer reactions to ethical products and increase its ethical consumption, less knowledgeable buyers show different purchasing patterns. In such circumstances, decisions are often driven by socio-cultural beliefs about the low functional performance of ethical or sustainable attributes. For instance, products more congruent with sustainability (e.g., produce) are considered to be simpler but less tasty than less sustainable products. Less sustainable products instead, are considered to be more sophisticated and to provide consumers with more hedonic pleasures (e.g., chocolate mousse). The extent that ethicality is linked with experiences that provide consumers with more pain than pleasure is also manifested in pro-social social behaviors. More specifically through conspicuous self-sacrificial consumption experiences like running for charity in marathons with wide public exposure. The willingness of consumers to engage in such costly initiatives is moderated by gender differences and further, mediated by the chronic productivity orientation of some individuals to use time in a productive manner. Using experimental design studies, I show that consumers (1) use a set of affective and cognitive associations with on-package elements to interpret ethical attributes, (2) implicitly associate ethicality with simplicity, and that (3) men versus women show different preferences in their forms of contribution to pro-social causes.

Optimisation and design of post-tensioning anchorage corner blisters in concrete box girder bidges

The design of anchorage blisters of internal continuity post-tensioning tendons of bridges built by the cantilever method, presents some peculiarities, not only because they are intermediate anchorages but also because these anchorages are located in blisters, so the prestressing force has to be transferred from the blister the bottom slab and web of the girder. The high density of steel reinforcement in anchorage blisters is the most common reason for problems with concrete cast in situ, resulting in zones with low concrete compacity, leading to concrete crushing failures under the anchor plates. A solution may involve improving the concrete compression and tensile strength. To meet these requirements a high-performance fibre reinforced self-compacting mix- ture (HPFRC) was used in anchorage corner blisters of post-tensioning tendons, reducing the concrete cross-section and decreasing the reinforcement needed. To assess the ultimate capacity and the adequate serviceability of the local anchorage zone after reducing the minimum concrete cross-section and the confining reinforcement, specified by the anchorage device supplier for the particular tendon, load transfer tests were performed. To investigate the behaviour of anchorage blisters regarding the transmission of stresses to the web and the bottom slab of the girder, and the feasibility of using high performance concrete only in the blister, two half scale models of the inferior corner of a box girder existing bridge were studied: a reference specimen of ordinary reinforced concrete and a HPFRC blister specimen. The design of the reinforcement was based in the tensile forces obtained on strut-and-tie models. An experimental program was carried out to assess the models used in design and to study the feasibility of using high performance concrete only in the blister, either with casting in situ, or with precast solutions. A non-linear finite element analysis of the tested specimens was also performed and the results compared.

A importância da comunicação estratégica na alteração de comportamentos na sociedade : o caso Sociedade Ponto Verde

A comunicação estratégica poderá ser entendida como a comunicação alinhada com a estratégia global de uma organização para alcançar o seu posicionamento estratégico. Ou seja, para alcançar o sucesso, uma organização precisa de ter uma comunicação consistente com a sua identidade e, ao mesmo tempo, adequada ao seu público-alvo e ao tipo de sector onde se insere. Só desta forma consegue conquistar a confiança e fidelidade dos consumidores, essenciais para o alcance dos objectivos. Em relação à alteração comportamentos, é essencial que as empresas costruam uma estratégia de comunicação coerente e consistente, adaptando as mensagens e os públicos-alvo escolhidos. Neste âmbito da alteração de comportamentos, estudou-se neste trabalho a Sociedade Ponto Verde (SPV), uma associação portuguesa sem fins lucrativos, que actua no âmbito da gestão e reciclagem de resíduos de embalagens. Procurou estudar-se a evolução da sua comunicação ao longo dos anos e a forma como adaptou as suas mensagens, de forma a conseguir incutir na sociedade portuguesa a importância do comportamento de reciclagem de resíduos. Neste estudo, procedeu-se a uma análise individualizada de cada uma das campanhas de comunicação da SPV e, posteriormente, aplicou-se um inquérito por questionário, para verificar a eficácia das mesmas campanhas perante o público-alvo. A metodologia utilizada neste trabalho consistiu na distribuição de um inquérito por questionário online, que permitiu recolher uma amostra probabilística por conveniência. Em seguida, recolhidos e tratados os dados referentes às 482 respostas recebidas, utilizou-se o programa SPSS (Stastitical Package for the Social Sciences) para analisar, tratar e discutir os resultados obtidos. Estes resultados demonstraram que, de facto, não houve uma grande percentagem de inquiridos que se lembram das campanhas da SPV. Os resultados são positivos e não desmentem a qualidade e coerência das mensagens, mas a verdade é que a percentagem de indivíduos que não se lembra de algumas campanhas chega a ser elevada (em especial nas campanhas iniciais da organização, quando existia falta de uma estratégia coerente). Justifica-se este facto, em parte, pelo excesso de informação e estímulos a que as pessoas estão sujeitas, pelo que a informação que retêm não fica para sempre, acabando por dar lugar a outras informações. Os indivíduos são inconscientemente selectivos com a informação que processam e guardam, pois não seria possível guardar toda a informação que lhes é transmitida. No que diz respeito à comunicação estratégica que visa alterar uma atitude e, posteriormente, um comportamento, conclui-se que, no geral, o comportamento das pessoas inquiridas aparenta ter sido influenciado pela comunicação da SPV, caso contrário, as respostas afirmativas quanto à reciclagem e de concordância com algumas das afirmações teriam sido inferiores. Ou seja, mesmo reconhecendo o carácter um pouco enviesado da amostra (não deverá ser considerada representativa da população portuguesa), é possível dizer que a estratégia de comunicação da SPV (em especial a partir de 2005) foi eficiente. Palavras-

Assessment of polymer-based nanocomposites biodegradability

The management of solid waste is a growing concern in many countries. Municipal solid waste is a major component of the total solid waste generated by society, and the composting of municipal solid waste has gained some attention even though a composting treatment for it is not yet widespread. It may not be realistic to replace large portions of these plastics with biodegradable materials, and it may be more important to separate plastics unsuitable for the composting process at the generating spots. However, for food packaging, there is still a great deal of interest in using biodegradable plastics that are difficult to sort at the generation spots. Under these circumstances, nanocomposites of biodegradable polymers as matrix and nanoparticles, that can be degraded along with organic wastes during composting could be a solution. Therefore, this chapter aims to give an overview on the biodegradability studies of bio-nanocomposites. It will focus on different polymers, nanocomposites containing different clay types and inorganic particles exposed under different environments.

Relationship between galactomannan structure and physicochemical properties of films produced thereof

In this work five sources of galactomannans, Adenanthera pavonina, Cyamopsis tetragonolobus, Caesalpinia pulcherrima, Ceratonia siliqua and Sophora japonica, presenting mannose/galactose ratios of 1.3, 1.7, 2.9, 3.4 and 5.6, respectively, were used to produce galactomannan-based films. These films were characterized in terms of: water vapour, oxygen and carbon dioxide permeabilities (WVP, O 2 P and CO 2 P); moisture content, water solubility, contact angle, elongation-at-break (EB), tensile strength (TS) and glass transition temperature (T g ). Results showed that films properties vary according to the galactomannan source (different galactose distribution) and their mannose/galactose ratio. Water affinity of mannan and galactose chains and the intermolecular interactions of mannose backbone should also be considered being factors that affect films properties. This work has shown that knowing mannose/galactose ratio of galactomannans is possible to foresee galactomannan-based edible films properties.

Advances and future challenges in printed batteries

There is an increasing interest in thin and flexible energy storage devices to meet modern society needs for applications such as, radio frequency sensing, interactive packaging and other consumer products. Printed batteries comply these requirements and are an excellent alternative to conventional batteries for many applications. Flexible and micro-batteries are also included in the area of printed batteries whenever fabricated by printing technologies. The main characteristics, advantages, disadvantages, developments, and printing techniques of printed batteries are presented and discussed in this review. The state-of-art takes into account both the research and industrial levels. In the academic one, the research progress of printed batteries is summarized divided in lithium-ion battery (Li-ion), zinc-manganese dioxide (Zn-MnO2), and other battery types with emphasis on the different materials for anode, cathode and separator as well as in the battery design. With respect to the industrial state-of-art, materials, device formulations and manufacturing techniques are presented. Finally, the prospects and challenges of printed batteries are discussed.

Implementação de um sistema de gestão e monitorização de embalagens retornáveis em ambiente industrial

Dissertação de mestrado em Engenharia de Sistemas

Engenharia de embalagens: propostas de acondicionamento na indústria de autorrádios

Dissertação de mestrado em Engenharia Mecânica

Development of active bio-based multilayer systems: encapsulation of cinnamaldehyde and their physicochemical characterization

[Excerpt] In this work, different multilayer structures, using a polyhydroxybutyrate-co-valerate film with a valerate content of 8% (PHBV8) as support, were developed aiming the development of active bio-based multilayer systems. An interlayer based on zein nanofibers with and without cinnamaldehyde were electrospun in the PHBV8 film and three multilayer systems were developed: 1) without an outer layer; 2) using a PHBV8 film as outer layer; and 3) using an alginate-based film as outer layer. Their physico-chemical properties were evaluated through: water vapour and oxygen permeabilities and colour measurements, Fourier Transform Infrared Spectroscopy (FTIR) and thermal analyses. Results showed that the presence of different outer layers affected the water vapour permeability and transparency of the multilayer films. (...)

Optimização do processo de recolha de resíduos: desenvolvimento de ferramentas de investigação operacional para o problema de orientação de equipas com multi-restrições

Tese de Doutoramento em Engenharia Industrial e de Sistemas.

Microbial spoilage and quality of marinated dark, firm, dry meat

Estudi elaborat a partir d’una estada al Royal Veterinary and Agricultural University of Denmark entre els mesos de Març a Juny del 2006. S’ha investigat l’efecte dels envasats amb atmosferes modificades (MAP), així com la marinació amb vi tint, sobre l’evolució de la contaminació bacteriològica de carns fosques, dures i seques (DFD). Les carns DFD es troben a les canals d’animals que, abans del sacrifici, han estat exposades a activitats musculars prolongades o estrès. Les carns DFD impliquen importants pèrdues econòmiques degut a la contaminació bacteriològica i als problemes tecnològics relacionats amb la alta capacitat de retenció d’aigua. A més a més, és crític per la indústria investigar la diversitat de la contaminació bacteriana, identificar les espècies bacterianes i controlar-les. Però és difícil degut a la inhabilitat per detectar algunes bactèries en medis coneguts, les interaccions entre elles, la complexitat dels tipus de contaminació com són aigua, terra, femtes i l’ambient. La Polymerasa chain reaction- Denaturating Electrophoresis Gel (PCR-DGEE ) pot sobrepassar aquests problemes reflectint la diversitat microbial i les espècies bacterianes. Els resultants han indicat que la varietat bacteriana de la carn incrementava amb els dies d’envasat independentment del mètode d’envasat, però decreixia significativament amb el tractament de marinació amb vi tint. La DGEE ha mostrat diferències en les espècies trobades, indicant canvis en la contaminació bacteriana i les seves característiques en la carn DFD sota els diferents tractaments. Tot i que la marinació és una bona alternativa i solució a la comercialització de carn DFD , estudis de seqüenciació són necessaris per identificar les diferents tipus de bactèries.

La ramaderia ecològica de boví a les Valls d'Àneu i viabilitat del producte ecològic: de la producció al consum

A les Valls d’Àneu la producció ramadera de boví ecològic és molt important, ja que, actualment, el 22% de les explotacions són ecològiques i es preveu que aquest percentatge augmenti fins al 50% en els propers dos anys. Malgrat això, la motivació principal per a convertir les explotacions convencionals en ecològiques és el factor econòmic, no la consciència ambiental. En l’anàlisi del cicle productiu carni del boví ecològic procedent de les Valls d’Àneu s’ha observat que no hi ha diferències substancials entre la producció ecològica i la convencional. Tot i així, el producte carni de boví ecològic no té gran sortida al mercat, ja que aquest és incipient i, a més, el preu del producte ecològic és molt més elevat que el del convencional. Un aspecte crític de la producció ramadera ecològica és que la seva normativa no considera els impactes ambientals que genera, com són els derivats del transport, la generació de residus d’envasos, etc. En aquest estudi es presenta una aproximació quantitativa dels impactes generats en el cicle productiu carni de boví ecològic de les Valls d’Àneu.

The pollutant diethylhexyl phthalate regulates hepatic energy metabolism via species-specific PPARalpha-dependent mechanisms.

Background: The modulation of energetic homeostasis by pollutants has recently emerged as a potential contributor to the onset of metabolic disorders. Diethylhexyl phthalate (DEHP) is a widely used industrial plasticizer to which humans are widely exposed. Phthalates can activate the three peroxisome proliferatoractivated receptor (PPAR) isotypes on cellular models and induce peroxisome proliferation in rodents.Objectives: In this study, we aimed to evaluate the systemic and metabolic consequences of DEHP exposure that have remained so far unexplored and to characterize the underlying molecular mechanisms of action.Methods: As a proof of concept and mechanism, genetically engineered mouse models of PPARs were exposed to high doses of DEHP, followed by metabolic and molecular analyses.Results: DEHP-treated mice were protected from diet-induced obesity via PPARalpha-dependent activation of hepatic fatty acid catabolism, whereas the activity of neither PPARbeta nor PPARgamma was affected. However, the lean phenotype observed in response to DEHP in wild-type mice was surprisingly abolished in PPARalpha-humanized mice. These species differences are associated with a different pattern of coregulator recruitment.Conclusion: These results demonstrate that DEHP exerts species-specific metabolic actions that rely to a large extent on PPARalpha signaling and highlight the metabolic importance of the species-specific activation of PPARalpha by xenobiotic compounds. Editor's SummaryDiethylhexyl phthalate (DEHP) is an industrial plasticizer used in cosmetics, medical devices, food packaging, and other applications. Evidence that DEHP metabolites can activate peroxisome proliferatoractivated receptors (PPARs) involved in fatty acid oxidation (PPARalpha and PPARbeta) and adiposite function and insulin resistance (PPARgamma) has raised concerns about potential effects of DEHP on metabolic homeostasis. In rodents, PPARalpha activation also induces hepatic peroxisome proliferation, but this response to PPARalpha activation is not observed in humans. Feige et al. (p. 234) evaluated systemic and metabolic consequences of high-dose oral DEHP in combination with a high-fat diet in wild-type mice and genetically engineered mouse PPAR models. The authors report that mice exposed to DEHP gained less weight than controls, without modifying their feeding behavior; they also exhibited lower triglyceride levels, smaller adipocytes, and improved glucose tolerance compared with controls. These effects, which were observed in mice fed both high-fat and standard diets, appeared to be mediated by PPARalpha-dependent activation of hepatic fatty acid catabolism without apparent involvement of PPARbeta or PPARgamma. However, mouse models that expressed human (versus mouse) PPARalpha tended to gain more weight on a high-fat diet than their DHEP-unexposed counterparts. The authors conclude that findings support species-specific metabolic effects of DEHP mediated by PPARalpha activation.