Expression and regulation of vascular endothelial growth factor ligands and receptors during menstruation and post-menstrual repair of human endometrium

Regeneration and growth of the human endometrium after shedding of the functional layer during menstruation depends on an adequate angiogenic response. We analysed the mRNA expression levels of all known vascular endothelial growth factor (VEGF) ligands and receptors in human endometrium collected in the menstrual and proliferative phases of the menstrual cycle. In addition, we evaluated the expression of VEGF-A, VEGF-R2 and NRP-1 at the protein level. Two periods of elevated mRNA expression of ligands and receptors were observed, separated by a distinct drop at cycle days (CDs) 9 and 10. Immunohistochemical staining showed that VEGF and VEGF-R2 were expressed in epithelial, stromal and endothelial cells. NRP-1 was mainly confined to stroma and blood vessels; only in late-proliferative endometrium, epithelial staining was also observed. Except for endothelial VEGF-R2 expression in CDs 6-8, there were no significant differences in the expression of VEGF, VEGF-R2 or NRP-1 in any of the cell compartments. In contrast, VEGF release by cultured human endometrium explants decreased during the proliferative phase. This output was significantly reduced in menstrual and early-proliferative endometrium by estradiol (E2) treatment. Western blot analysis indicated that part of the VEGF-A was trapped in the extracellular matrix (ECM). Changes in VEGF ligands and receptors were associated with elevated expression of the hypoxia markers HIF1 alpha and CA-IX in the menstrual and early proliferative phases. HIF1 alpha was also detected in late-proliferative phase endometrium. Our findings indicate that VEGF-A exerts its actions mostly during the first half of the proliferative phase. Furthermore, VEGF-A production appears to be triggered by hypoxia in the menstrual phase and subsequently suppressed toy estrogen during the late proliferative phase.

Indirect effects of phytochemicals on offspring performance of Queensland fruit fly, Bactrocera tryoni (Diptera: Tephritidae)

Phytochemical lures such as methyl eugenol (ME) and cue-lure are used in the management of Bactrocera fruit flies for monitoring and control. These lures are not just attractants, but also trigger physiological changes in males that lead to enhanced mating success. Additionally, in the cue-lure-responsive Bactrocera tryoni, females mated with lure-fed males exhibit changes in fecundity, remating receptivity and longevity. While the lures show current generation effects, no research has been carried out on possible multigenerational effects, although such effects have been hypothesized within a ‘sexy-son’ sexual selection model. In this study, we test for indirect, cross-generational effects of lure exposure in F1offspring of B. tryoni females mated with cue-lure-fed, zingerone-fed and lure-unfed (=control) males. The F1 attributes we recorded were immature development time, immature survival, adult survival and adult male lure foraging. No significant differences were found between treatments for any of the three life-history measurements, except that the offspring sired by zingerone-fed males had a longer egg development time than cue-lure and control offspring. However, indirect exposure to lures significantly enhanced the lure-foraging ability of F1 adult males. More offspring of cue-lure-fed males arrived at a lure source in both large flight cages and small laboratory cages over a 2-h period than did control males. The offspring of zingerone-fed males were generally intermediate between cue-lure and control offspring. This study provides the first evidence of a next generation effect of fruit fly male lures. While the results of this study support a ‘sexy-son’ sexual selection mechanism for the evolution of lure response in Bactrocera fruit flies, our discussion urges caution in interpreting our results in this way.

Fashion Thinking : Creative Approaches to the Design Process, F. Dieffenbacher (2013)

Fashion Thinking: Creative Approaches to the Design Process, F. Dieffenbacher (2013) London: AVA, 224 pp., ISBN: 9782940411719, p/bk, $79.99

Is there a bone-nail specific entry point? automated fit quantification of tibial nail designs during the insertion for six different nail entry points

Intramedullary nailing is the standard fixation method for displaced diaphyseal fractures of tibia. Selection of the correct nail insertion point is important for axial alignment of bone fragments and to avoid iatrogenic fractures. However, the standard entry point (SEP) may not always optimise the bone-nail fit due to geometric variations of bones. This study aimed to investigate the optimal entry for a given bone-nail pair using the fit quantification software tool previously developed by the authors. The misfit was quantified for 20 bones with two nail designs (ETN and ETN-Proximal Bend) related to the SEP and 5 entry points which were 5 mm and 10 mm away from the SEP. The SEP was the optimal entry point for 50% of the bones used. For the remaining bones, the optimal entry point was located 5 mm away from the SEP, which improved the overall fit by 40% on average. However, entry points 10 mm away from the SEP doubled the misfit. The optimised bone-nail fit can be achieved through the SEP and within the range of a 5 mm radius, except posteriorly. The study results suggest that the optimal entry point should be selected by considering the fit during insertion and not only at the final position.

Application of TS-Fuzzy Controller for Active Power and DC Capacitor Voltage Control in DFIG-Based Wind Energy Conversion Systems

This chapter focuses on the implementation of the TS (Tagaki-Sugino) fuzzy controller for the Doubly Fed Induction Generator (DFIG) based wind generator. The conventional PI control loops for mantaining desired active power and DC capacitor voltage is compared with the TS fuzzy controllers. DFIG system is represented by a third-order model where electromagnetic transients of the stator are neglected. The effectiveness of the TS-fuzzy controller on the rotor speed oscillations and the DC capacitor voltage variations of the DFIG damping controller on converter ratings is also investigated. The results from the time domain simulations are presented to elucidate the effectiveness of the TS-fuzzy controller over the conventional PI controller in the DFIG system. The proposed TS-fuzzy con-troller can improve the fault ride through capability of DFIG compared to the conventional PI controller.

Clinical use of diodes and micro-chambers to obtain accurate small field output factor measurements

There have been substantial advances in small field dosimetry techniques and technologies, over the last decade, which have dramatically improved the achievable accuracy of small field dose measurements. This educational note aims to help radiation oncology medical physicists to apply some of these advances in clinical practice. The evaluation of a set of small field output factors (total scatter factors) is used to exemplify a detailed measurement and simulation procedure and as a basis for discussing the possible effects of simplifying that procedure. Field output factors were measured with an unshielded diode and a micro-ionisation chamber, at the centre of a set of square fields defined by a micro-multileaf collimator. Nominal field sizes investigated ranged from 6×6 to 98×98 mm2. Diode measurements in fields smaller than 30 mm across were corrected using response factors calculated using Monte Carlo simulations of the full diode geometry and daisy-chained to match micro-chamber measurements at intermediate field sizes. Diode measurements in fields smaller than 15 mm across were repeated twelve times over three separate measurement sessions, to evaluate the to evaluate the reproducibility of the radiation field size and its correspondence with the nominal field size. The five readings that contributed to each measurement on each day varied by up to 0.26%, for the “very small” fields smaller than 15 mm, and 0.18% for the fields larger than 15 mm. The diode response factors calculated for the unshielded diode agreed with previously published results, within 1.6%. The measured dimensions of the very small fields differed by up to 0.3 mm, across the different measurement sessions, contributing an uncertainty of up to 1.2% to the very small field output factors. The overall uncertainties in the field output factors were 1.8% for the very small fields and 1.1% for the fields larger than 15 mm across. Recommended steps for acquiring small field output factor measurements for use in radiotherapy treatment planning system beam configuration data are provided.

Conceptual beliefs about human values and their implications: Human nature beliefs predict value importance, value trade-offs, and responses to value-laden rhetoric

Beliefs that may underlie the importance of human values were investigated in 4 studies, drawing on research that distinguishes natural-kind (natural), nominal-kind (conventional), and artifact (functional) beliefs. Values were best characterized by artifact and nominal-kind beliefs, as well as a natural-kind belief specific to the social domain, “human nature” (Studies 1 and 2). The extent to which values were considered central to human nature was associated with value importance in both Australia and Japan (Study 2), and experimentally manipulating human nature beliefs influenced value importance (Study 3). Beyond their association with importance, human nature beliefs predicted participants’ reactions to value trade-offs (Study 1) and to value-laden rhetorical statements (Study 4). Human nature beliefs therefore play a central role in the psychology of values.

Swing load stabilization for mining and construction applications

This paper discusses the issue of sensing and control for stabilizing a swinging load. Our work has focused in particular on the dragline as used for overburden stripping in open-pit coal mining, but many of the principles would also be applicable to construction cranes. Results obtained from experimental work on a full-scale production dragline are presented.

Ants, apples and the ABCs: The use of commercial phonics programmes in prior-to-school children's services

Commercial phonics programmes (e.g. Jolly Phonics and Letterland) are becoming widely used in the early years of school. These programmes claim to use a systematic explicit approach, considered as the preferred method of phonics instruction for teaching alphabetic code-breaking skills in Australia and the UK in the first years of school (Department of Education, Science and Training, 2005; Rose, 2006). However, little is known about the extent to which they are being used in prior-to-school settings, and the reasons behind decisions to use them. This study surveyed 283 early childhood staff in Sydney, Australia and found that commercial phonics programmes were being used in 36% of the early childhood settings surveyed. Staff with early childhood univer- sity qualifications and staff working in not-for-profit service types were less likely to use a commercial phonics programme than staff without university qualifications and staff working in for-profit services. Staff with less than 10 years’ experience were also more likely to use a commercial phonics programme. The rationale behind decisions deter- mining whether or not staff used the programmes ranged from pragmatic reasons, such as parent pressure or higher management decisions, to pedagogical reasons, such as teacher beliefs about how children learn to read and write. The practices staff engage in to teach phonics are explored.

Design and evaluation of intentionally enriched awareness

In this chapter we introduce and explore the notion of “intentionally enriched awareness”. Intentional enrichment refers to the process of actively engaging users in the awareness process by enabling them to express intentions. We initially look at the phenomenon if sharing intentional information in related collaborative systems. We then explore the concept of intentional enrichment through designing and evaluating the AnyBiff system which allows users to freely create, share and use a variety of biff applications. Biffs are simple representation of pre-defined activities. Users can select biffs to indicate that they are engaged in an activity. We summarise the results of a trial which allowed us to gain insights into the potential of the AnyBiff prototype and the underlying biff concept to implement intentionally enriched awareness. Our findings show that intentional disclosure mechanisms in the form of biffs were successfully used in a variety of contexts. Users actively engaged in the design of a large variety of biffs and explored many different uses of the concept. The study revealed a whole host of issues with regard to intentionally enriched awareness which give valuable insight into the conception and design of future applications in this area.

Interlaminar mechanical properties of carbon fiber reinforced plastic laminates modified with graphene oxide interleaf

By taking the advantage of the excellent mechanical properties and high specific surface area of graphene oxide (GO) sheets, we develop a simple and effective strategy to improve the interlaminar mechanical properties of carbon fiber reinforced plastic (CFRP) laminates. With the incorporation of graphene oxide reinforced epoxy interleaf into the interface of CFRP laminates, the Mode-I fracture toughness and resistance were greatly increased. The experimental results of double cantilever beam (DCB) tests demonstrated that, with 2 g/m2 addition of GO, the Mode-I fracture toughness and resistance of the specimen increase by 170.8% and 108.0%, respectively, compared to those of the plain specimen. The improvement mechanisms were investigated by the observation of fracture surface with scanning electron microscopies. Moreover, finite element analyses were performed based on the cohesive zone model to verify the experimental fracture toughness and to predict the interfacial tensile strength of CFRP laminates.