Genetic associations at 53 loci highlight cell types and biological pathways relevant for kidney function.

Reduced glomerular filtration rate defines chronic kidney disease and is associated with cardiovascular and all-cause mortality. We conducted a meta-analysis of genome-wide association studies for estimated glomerular filtration rate (eGFR), combining data across 133,413 individuals with replication in up to 42,166 individuals. We identify 24 new and confirm 29 previously identified loci. Of these 53 loci, 19 associate with eGFR among individuals with diabetes. Using bioinformatics, we show that identified genes at eGFR loci are enriched for expression in kidney tissues and in pathways relevant for kidney development and transmembrane transporter activity, kidney structure, and regulation of glucose metabolism. Chromatin state mapping and DNase I hypersensitivity analyses across adult tissues demonstrate preferential mapping of associated variants to regulatory regions in kidney but not extra-renal tissues. These findings suggest that genetic determinants of eGFR are mediated largely through direct effects within the kidney and highlight important cell types and biological pathways.

Genome-wide Association Studies Identify Genetic Loci Associated With Albuminuria in Diabetes.

Elevated concentrations of albumin in the urine, albuminuria, are a hallmark of diabetic kidney disease and are associated with an increased risk for end-stage renal disease and cardiovascular events. To gain insight into the pathophysiological mechanisms underlying albuminuria, we conducted meta-analyses of genome-wide association studies and independent replication in up to 5,825 individuals of European ancestry with diabetes and up to 46,061 without diabetes, followed by functional studies. Known associations of variants in CUBN, encoding cubilin, with the urinary albumin-to-creatinine ratio (UACR) were confirmed in the overall sample (P = 2.4 × 10(-10)). Gene-by-diabetes interactions were detected and confirmed for variants in HS6ST1 and near RAB38/CTSC. Single nucleotide polymorphisms at these loci demonstrated a genetic effect on UACR in individuals with but not without diabetes. The change in the average UACR per minor allele was 21% for HS6ST1 (P = 6.3 × 10(-7)) and 13% for RAB38/CTSC (P = 5.8 × 10(-7)). Experiments using streptozotocin-induced diabetic Rab38 knockout and control rats showed higher urinary albumin concentrations and reduced amounts of megalin and cubilin at the proximal tubule cell surface in Rab38 knockout versus control rats. Relative expression of RAB38 was higher in tubuli of patients with diabetic kidney disease compared with control subjects. The loci identified here confirm known pathways and highlight novel pathways influencing albuminuria.

Sistema com atmosfera controlada para a caracterização de sensores a gases

This paper describes a sample holder for the electrical measurement of oxides or conducting polymers in the form of pellets or films which are used as gas sensors. The system makes it possible to control the sample temperature, the gas pressure and composition. The temperature in the sample can be changed from 25ºC to 450ºC, and the gas pressure in the chamber is controlled between 5 ¥ 10-4 and 1000 mbar. The performance of the system in resistance measurements of doped tin oxide pellets and polyaniline films deposited on platinum electrodes for methane is analyzed.

Síntese e caracterização de cloro[ácido 2-(difenilfosfino)benzóico]-ouro(I) e alguns de seus derivados

In this contribution a few new gold(I)phosphine complexes, [2-(PPh2)C6H4CO 2H]AuX (where X = Cl, SCN, Br3) and a similar gold(III) derivative [{2-(PPh2)C6H4CO 2H}AuIII Cl (C6H4CH2NMe2 )]Cl have been synthesised and characterised. The phosphine, 2-(diphenylphosphino)benzoic acid, has been employed for the first time in gold chemistry. This ligand is potentially bidentate through bonding of the phosphine and carboxylate groups. The X-ray structure of the complex chloro[2-(diphenylphosphino) benzoic acid]gold(I) has been elucidated and the bond lengths encountered show great similarity to those of chloro(triphenylphosphine)gold(I). [2-(PPh2)C6H4CO 2H]AuCl crystallises in the space group P2(1)/c with a = 9.113(2) Å, b = 10.925(2) Å, c = 23.069(4) Å, beta = 99.95º(3), V = 2299 ų, Z = 4 and R = 0.091. Biological tests for anti-fungal and anti-bacterial activity demostrate that [2-(PPh2)C6H4CO 2H]AuCl exhibits broad spectrum activity against a range of organisms.

Sistema automático para análise direta de ligas metálicas por eletrodissolução anódica e espectrometria de absorção atômica

An automatic system for the direct determination of lead and tin by atomic absorption spectrometry is described. The on-line treatment of the metallic samples was obtained by anodic electrodissolution in a flow injection system. Lead was determined by flame atomic absorption spectrometry (FAAS) and tin by graphite furnace atomic absorption spectrometry (GFAAS). A computer program managed the current source and the solenoid valves that direct the fluids. Good linear correlations between absorbance and current intensity for lead and tin were observed. Results were in agreement with the certified values. Precision was always better than 5%. The recommended procedure allows the direct determination of 60 or 30 elements/h using FAAS or GFAAS, respectively.

Síntese e caracterização de compostos organometálicos de estanho (IV)

Organotin(IV) derivatives containing bulky R groups have been synthesized and characterized. It is discussed how their syntheses depend on the reaction conditions, such as stoichiometry of starting materials, bulkiness of the organo group attached to the Sn centre as well as temperature in which the reaction is carried out. Finally the molecular structure of Sn2Ph6, determined by X-ray diffraction is reviewed.

Dióxido de titânio sol-gel: propriedades e comportamento eletrocrômico

Titanium dioxide was prepared by hydrolysis and polycondensation of titanium tetraisopropoxide. TiO2 films were obtained by spin coating of the precursor solution on ITO substractes (glass covered with indium doped tin oxide). Films were prepared using different temperatures and hydrochloric acid contents. The effect of the drying temperature of the films (100 or 400ºC) was also investigated. TiO2 films were characterized by cyclic voltammetry, chronoamperometry, ultraviolete-visible spectroscopy, scanning electron microscopy and X-ray diffractrometry.

Derivados organometálicos de estanho(II) - Parte 1. Compostos ciclopentadienílicos

This paper provides a brief review of the chemistry of cyclopentadienyl Sn(II) derivatives which includes the preparation, the molecular structure and reactivity associated with such bis-sandwich tin(II) species. It is compared structural and spectroscopic results and it is also discussed how the nature of the cyclopentadienyl ring bonded to the Sn centre plays an important role in the structural and stability features of the derivatives. Bulk rings such as C5HPr i4- , C5Bz5-, C5Me4SiMe2Bu t- and C5Ph5- render air-stable and parallel ring-bonded compounds.

A química do estanho no século 18, ou como uma consulta se transformou num projeto de pesquisa

An ominous suspicion arose in France in the second half of the 18th century, that household tin objects might be contaminated with arsenic. Charged with the task of studying and deciding the question, the chemists Pierre Bayen and Louis Charlard set up a comprehensive research project, which resulted in a book describing the whole enterprise. It is very gratifying to analyse this work today, for the many lights it sheds on the way chemistry was practised and reasoned at the time, and for the whiff of modernity we are presented with.

Dióxido de estanho nanoestruturado: síntese e crescimento de nanocristais e nanofitas

The objectives of this work are to supply a basic background on nanostructured materials and also to report about the obtaining of nanoparticles, mainly, tin dioxide nanocrystalline particles (obtained by using the polymeric precursor method) presenting a high stability against particle growth due to the usage of a metastable solid solution. The synthesis and growth of SnO2 nanoribbons by a carbothermal reduction process are also discussed.

Obtenção de filmes espessos de seleneto de cobre sobre carbono vítreo, ouro, titânio e cobre

Copper selenide (berzelianite) films were prepared on the title substrates using the chemical bath deposition technique (CBD). Film composition was determined by energy dispersion of x-rays. The kinetics of film growth is parabolic and film adherence limits the film thickness. On titanium, copper selenide forms islands that do not completely cover the surface, unless the substrate is prepared with a tin oxide layer; film composition also depends on the titanium oxide layer. On vitreous carbon, CBD and mechanical immobilization techniques lead to films with similar resistances for the electron transfer across the film/substrate interface. On gold, composition studies revealed that film composition is always the same if the pH is in the range from 8 to 12, in contrast to films prepared by an ion-ion combination route. On copper, a new procedure for obtaining copper selenide films as thick as 5 µm has been developed.

Efecto de la naturaleza del precursor sobre las caracteristicas de las nanoparticulas de SnO2 sintetizadas

Tin oxide (SnO2) is widely used in industry as raw material for electronic devices, plating of different types of materials, for dyes and pigments, for electroplating, heterogeneous catalysis, etc. In this work SnO2 was obtained by a controlled precipitation method with special attention to the effects the tin precursor has on the microstructure of the final product. The most appropriate pH for obtaining SnO2 with the rutile structure as the main phase is 6.25 for SnCl2 and 6.40 for SnSO4. After heat treatment at 600 °C, particles of nanometric order (~10 - 30 nm approx) were obtained. The characterization of the solid phase was made by X-ray diffraction (XRD), thermal analysis (DTA/TG), transmission electron microscopy (TEM) and Fourier transformed infrared spectroscopy (FTIR).

Distribuição espacial de compostos orgânicos de estanho em sedimentos costeiros e em Phallusia nigra da Baía de Todos os Santos e litoral norte da Bahia - Brasil

Organic tin compounds were investigated in the sediment of twenty-four stations located in the Todos os Santos Bay and the north coast of Bahia - Brazil. The concentration of these organic tin was also determined in a ascidium species of Phallusia nigra. The speciation and quantification was performed by GC-MS/MS. The highest concentrations were: tributyltin (TBT) 438 ng g-1, dibutyltin (DBT) 207 ng g-1, monobutyltin (MBT) 423 ng g-1, diphenyltin (DPT) 25.8 ng g-1 and monophenyltin (MPT) 55.0 ng g-1. DBT and MBT were found in Phallusia nigra, with highest concentrations of 294.1 and 148.5 ng g-1, respectively.

Utilization of Sn/Nb2O5 composite for the removal of methylene blue

In this work, the oxidation of methylene blue textile dye in the presence of hydrogen peroxide, using niobium oxide impregnated with different proportions of tin (1, 5 and 10% in mass) as catalyst was studied. The materials were characterized by TPR, XPS, XRD and FTIR. The oxidation tests monitored by ESI-MS showed that the composite containing the higher amount of tin was the most efficient in the removal of the dye. The XRD, XPS, and TPR data presented evidence of the formation of the tin-niobium oxide composite containing Sn0 and supported SnO2.

Reator de UV-Ozônio com lâmpada a vapor de mercúrio a alta pressão modificada para tratamento superficial de óxidos transparentes condutivos utilizados em dispositivos poliméricos eletroluminescentes

An UV-Ozone reactor was developed with an ignition tube extracted into HID mercury lamp used to irradiation on zinc oxide (ZnO) and fluorinated tin oxide (FTO) films for PLEDs devices. Different exposures times were used. In contact angle measurements revealed better results for ZnO and FTO by 15 and 5 min, respectively. In Diffuse Reflectance Infra-red Fourier Transformed (DRIFT) spectroscopy allowed the observation of water, hydrocarbon and carbon dioxide adsorbed on the untreated TCO surfaces. After the UV-Ozone treatment the contaminants were significantly reduced or eliminated and the PLEDs devices decreased threshold voltages in comparison with respectively untreated TCOs.