Potential for ORC application in the Portuguese manufacturing industry

Dissertação para obtenção do Grau de Mestre em Engenharia do Ambiente, perfil Gestão e Sistemas Ambientais

Precast concrete wall-foundation connection. Development of a seismic dissipative connection

Seismic events are a major factor to consider in structural design of buildings in many countries. With the purpose of saving lives, most of the design codes lead to structural solutions that withstand large seismic actions without collapsing, but without taking into account a possible usage of the structures after the earthquake. As a result, it is necessary to consider the time needed to repair/retrofit the damaged structures (i.e. the downtime) since this period of inactivity may result in huge financial implications for the occupants of the buildings. In order to minimise the damages and simplify repair operations, structural solutions with rocking systems and negligible residual displacements have been developed during the last two decades. Systems with precast concrete rocking walls were studied with the aim of investigat- ing suitable and convenient structural alternatives to minimise the damage in case of an earthquake. Experimental, numerical and analytical analyses on post-tensioned solutions, with and without energy dissipation devices, were carried out in this research. The energy dissipation devices were made from steel angles that were further developed during the research. Different solutions for these devices were experimentally tested under cyclic loading and the results are presented. Numerical and analytical work on steel angles was also carried out. Regarding the concrete rocking wall systems, two concrete rocking wall systems were studied: post-tensioned walls and post-tensioned walls with energy dissipation devices. In the latter, the solution was to fix them externally to the wall, allowing their easy replacement after an earthquake. It is shown that the dissipaters are a viable solution for use in precast concrete rocking wall systems. A building case study is presented. The comparison between a traditional monolithic system and a hybrid solution was carried out, allowing the evaluation of the efficiency of the solution that was developed.

Earnings overseas and cash holdings

I investigate the impact of foreign pre-tax income on the total amount of cash held by companies and on the amount of cash that is held in companies’ foreign subsidiaries. I also investigate the impact of the existence and amount of cash held on companies’ foreign subsidiaries in the composition of cash holdings in terms of risk and liquidity. Using a sample of 100 largest U.S. non-financial and non-utilities companies I find that companies with higher earnings overseas present higher cash reserves and invest a higher fraction of their cash in risky assets. My evidence suggests that companies have a different optimization strategy for cash overseas, in which precautionary motives are not the main driver for holding cash.

Comportamentos das famílias portuguesas em épocas de calor e durante a onda de calor de Agosto de 2003

RESUMO - Este estudo teve como principal objectivo a caracterização das atitudes e da adopção de medidas de protecção em períodos de calor e em particular conhecer aquelas que efectivamente foram adoptadas durante a onda de calor de Agosto de 2003 (29 de Julho a 15 de Agosto). Foi realizado um inquérito por via postal, aplicando um questionário aos indivíduos de 18 e mais anos das unidades de alojamento (UA), que constituem a amostra ECOS (Em Casa Observamos Saúde) do Observatório Nacional de Saúde. Estudaram-se 769 indivíduos, o que correspondeu a 25,6% da totalidade dos indivíduos elegíveis nas UA. Uma vez que a amostra ECOS não é autoponderada, foram ponderados os resultados das unidades de alojamento pela variável do Instituto Nacional de Estatística (INE) «número de famílias clássicas» por região e pela «população residente segundo o nível de instrução» obtidas pelos censos de 2001. Os comportamentos referidos como adoptados em épocas de calor que apresentaram maiores percentagens foram «tomar duches ou banhos» (84,6%), «ingestão de líquidos» (79,6%), «uso de roupa leve, larga e clara» (73,2%) e «tomar refeições leves» (53,7%). Durante a onda de calor de 2003, a maior parte da população (92,5%) leu, ouviu ou viu informação sobre os cuidados a ter durante a onda de calor, tendo sido a televisão (95,2%), a rádio (56,3%) e os jornais (49,3%) os meios de comunicação social mais referidos. Cerca de metade da população (51,4%) informou alguém, fundamentalmente a família, sobre os cuidados a ter. Com efeito, durante esta onda de calor verificou-se um maior cuidado em relação a comportamentos mais prejudiciais em épocas de maior calor. Por um lado, a população portuguesa andou menos ao sol (49,4%), fez menos viagens de carro/transportes à hora do calor (39,8%), realizou menos actividades que exigiriam esforço físico (32,5%) e também houve alguma preocupação em beber menos bebidas alcoólicas (26,5%). Por outro lado, aumentaram os comportamentos que já são mais habituais durante o período de Verão, tais como abrir as janelas durante a noite (40,8%), tomar refeições leves (46,7%), tomar mais duches ou banhos (58,5%), o uso de roupas leves largas e claras (42,5%) e o uso de ventoinhas (37,8%). A alteração do comportamento andar ou estar ao sol sem restrições aumenta com o número de meios de comunicação onde se obteve informação. Abrir as janelas de casa durante a noite e tomar duches ou banhos apresentou uma associação com o número de meios de comunicação onde se obteve informação e com o número de pessoas que prestaram informação. Ingerir líquidos e usar roupa leve, larga e clara mostrou também uma dependência do número de meios de comunicação onde se obteve informação.

Processo especial de revitalização

The following report aims to present the internship developed under the Master in Legal Sciences Business in the Legal Affairs management of Caixa Geral de Depósitos S.A. Activities were developed in the field of Banking Law, focusing on the Special Revitalization Process. The aim of these activities was to promote the construction of a study that, apart from its doctrinal and jurisprudential research, also excels in the practical adequacy of the regime lectured. The revitalizing effectiveness of the Special Revitalization Process is erected in the Article 17-E, nº 1, which establishes a series of procedural – stand still effects - which aim to allow the debtor "breathing space", ie, a period during which creditors are prevented from setting up "actions for debt collection" against him, suspending the pending actions with identical purposes. Therefore, this report essentially studies these effects, considering "actions in debt collection" executive actions that are intended to recover a debt of any kind, including anticipatory precautionary procedures of an action of this nature. In addition, it is necessary to set boundaries temporally and subjectively to the standstill period, understanding that this period should be extended beyond the legally established period, in order to preserve the ratio of the process, concretely, until the recovery plan effects. In turn, we understand that the standstill effects only apply to the established material in connection with the debtor, remaining the rights of creditors unaffected over the ones of the guarantors and debtors.

Harvest control rule vs optimal harvesting of an age-structured population: The case of the Ibero-Atlantic Sardine Fishery

Research Masters

Qualitative risk assessment during polymer mortar test specimens preparation - methods comparison

Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.

Melhoria da eficiência energética em edifícios dos anos 70: implementação de soluções sustentáveis low-tech e low-cost

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Rockburst laboratory tests database - Application of data mining techniques

Rockburst is characterized by a violent explosion of a block causing a sudden rupture in the rock and is quite common in deep tunnels. It is critical to understand the phenomenon of rockburst, focusing on the patterns of occurrence so these events can be avoided and/or managed saving costs and possibly lives. The failure mechanism of rockburst needs to be better understood. Laboratory experiments are undergoing at the Laboratory for Geomechanics and Deep Underground Engineering (SKLGDUE) of Beijing and the system is described. A large number of rockburst tests were performed and their information collected, stored in a database and analyzed. Data Mining (DM) techniques were applied to the database in order to develop predictive models for the rockburst maximum stress (σRB) and rockburst risk index (IRB) that need the results of such tests to be determined. With the developed models it is possible to predict these parameters with high accuracy levels using data from the rock mass and specific project.

Reflexão crítica sobre a redução das pensões no âmbito da convergência dos regimes da Caixa Geral de Aposentações e da Segurança Social

Dissertação de mestrado em Direito Tributário e Fiscal

Da prova: na atuação policial e no âmbito da infração tributária

Relatório de atividade profissional de mestrado em Direito Judiciário

Benefits from energy related building renovation beyond costs, energy and emissions

The relevance of the building sector in the global energy use as well as in the global carbon emissions, both in the developed and developing countries, makes the improvement of the overall energy performance of existing buildings an important part of the actions to mitigate climate changes. Regardless of this potential for energy and emissions saving, large scale building renovation has been found hard to trigger, mainly because present standards are mainly focused on new buildings, not responding effectively to the numerous technical, functional and economic constraints of the existing ones. One of the common problems in the assessment of building renovation scenarios is that only energy savings and costs are normally considered, despite the fact that it has been long recognized that investment on energy efficiency and low carbon technologies yield several benefits beyond the value of saved energy which can be as important as the energy cost savings process. Based on the analysis of significant literature and several case studies, the relevance of co-benefits achieved in the renovation process is highlighted. These benefits can be felt at the building level by the owner or user (like increased user comfort, fewer problems with building physics, improved aesthetics) and should therefore be considered in the definition of the renovation measures, but also at the level of the society as a whole (like health effects, job creation, energy security, impact on climate change), and from this perspective, policy makers must be aware of the possible crossed impacts among different areas of the society for the development of public policies.

Aplicação de princípios e ferramentas Lean numa empresa de produção de cablagens

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Criação de um sistema de apoio para o suporte avançado de vida

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)

Incorporation of hybrid phase change materials in plastering mortars for increased energy efficiency in buildings

Tese de Doutoramento em Engenharia Civil.