Cost effectiveness of OptiMal® rapid diagnostic test for malaria in remote areas of the Amazon Region, Brazil

Abstract Background In areas with limited structure in place for microscopy diagnosis, rapid diagnostic tests (RDT) have been demonstrated to be effective. Method The cost-effectiveness of the Optimal® and thick smear microscopy was estimated and compared. Data were collected on remote areas of 12 municipalities in the Brazilian Amazon. Data sources included the National Malaria Control Programme of the Ministry of Health, the National Healthcare System reimbursement table, hospitalization records, primary data collected from the municipalities, and scientific literature. The perspective was that of the Brazilian public health system, the analytical horizon was from the start of fever until the diagnostic results provided to patient and the temporal reference was that of year 2006. The results were expressed in costs per adequately diagnosed cases in 2006 U.S. dollars. Sensitivity analysis was performed considering key model parameters. Results In the case base scenario, considering 92% and 95% sensitivity for thick smear microscopy to Plasmodium falciparum and Plasmodium vivax, respectively, and 100% specificity for both species, thick smear microscopy is more costly and more effective, with an incremental cost estimated at US$549.9 per adequately diagnosed case. In sensitivity analysis, when sensitivity and specificity of microscopy for P. vivax were 0.90 and 0.98, respectively, and when its sensitivity for P. falciparum was 0.83, the RDT was more cost-effective than microscopy. Conclusion Microscopy is more cost-effective than OptiMal® in these remote areas if high accuracy of microscopy is maintained in the field. Decision regarding use of rapid tests for diagnosis of malaria in these areas depends on current microscopy accuracy in the field.

Steel fibre reinforced concrete pipes. Part 2: numerical model to simulate the crushing test

This paper is part of an extensive work about the technological development, experimental analysis and numerical modeling of steel fibre reinforced concrete pipes. The first part ("Steel fibre reinforced concrete pipes. Part 1: technological analysis of the mechanical behavior") dealt with the technological development of the experimental campaign, the test procedure and the discussion of the structural behavior obtained for each of the dosages of fibre used. This second part deals with the aspects of numerical modeling. In this respect, a numerical model called MAP, which simulates the behavior of fibre reinforced concrete pipes with medium-low range diameters, is introduced. The bases of the numerical model are also mentioned. Subsequently, the experimental results are contrasted with those produced by the numerical model, obtaining excellent correlations. It was possible to conclude that the numerical model is a useful tool for the design of this type of pipes, which represents an important step forward to establish the structural fibres as reinforcement for concrete pipes. Finally, the design for the optimal amount of fibres for a pipe with a diameter of 400 mm is presented as an illustrating example with strategic interest.

An adaptive solar radiation numerical model

[EN]A numerical model for the evaluation of solar radiation in different locations is presented. The solar radiation model is implemented taking into account the terrain surface using two-dimensional adaptive meshes of triangles that are constructed using a refinement/derefinement procedure in accordance with the variations of terrain surface and albedo. The selected methodology defines the terrain characteristics with a minimum number of points so that the computational cost is reduced for a given accuracy. The model can be used in atmospheric sciences as well as in other fields such as electrical engineering, since it allows the user to find the optimal location for maximum power generation in photovoltaic or solar thermal power plants...

An optimal estimator for the correlation of CMB anisotropies with Large Scale Structures and its application to WMAP-7year and NVSS

In the thesis we present the implementation of the quadratic maximum likelihood (QML) method, ideal to estimate the angular power spectrum of the cross-correlation between cosmic microwave background (CMB) and large scale structure (LSS) maps as well as their individual auto-spectra. Such a tool is an optimal method (unbiased and with minimum variance) in pixel space and goes beyond all the previous harmonic analysis present in the literature. We describe the implementation of the QML method in the {\it BolISW} code and demonstrate its accuracy on simulated maps throughout a Monte Carlo. We apply this optimal estimator to WMAP 7-year and NRAO VLA Sky Survey (NVSS) data and explore the robustness of the angular power spectrum estimates obtained by the QML method. Taking into account the shot noise and one of the systematics (declination correction) in NVSS, we can safely use most of the information contained in this survey. On the contrary we neglect the noise in temperature since WMAP is already cosmic variance dominated on the large scales. Because of a discrepancy in the galaxy auto spectrum between the estimates and the theoretical model, we use two different galaxy distributions: the first one with a constant bias $b$ and the second one with a redshift dependent bias $b(z)$. Finally, we make use of the angular power spectrum estimates obtained by the QML method to derive constraints on the dark energy critical density in a flat $\Lambda$CDM model by different likelihood prescriptions. When using just the cross-correlation between WMAP7 and NVSS maps with 1.8° resolution, we show that $\Omega_\Lambda$ is about the 70\% of the total energy density, disfavouring an Einstein-de Sitter Universe at more than 2 $\sigma$ CL (confidence level).

Essays On CEO Compensation: New Evidence On The Managerial-Power Vs. Optimal Contracting Debate

This dissertation analyzes the effect of market analysts’ expectations of share prices (price targets) on executive compensation. It examines how well the estimated effects of price targets on compensation fit with two competing views on determining executive compensation: the arm’s length bargaining model, which assumes that a board seeks to maximize shareholders’ interests, and the managerial power model, which assumes that a board seeks to maximize managers’ compensation (Bebchuk et al. 2005). The first chapter documents the pattern of CEO pay from fiscal year 1996 to 2010. The second chapter analyzes the Institutional Broker Estimate System Detail History Price Target data file, which that reports analysts’ price targets for firms. I show that the number of price target announcements is positively associated with company share price’s volatility, that price targets are predictive of changes in the value of stocks, and that when analysts announce positive (negative) expectations of future stock price, share prices change in the same direction in the short run. The third chapter analyzes the effect of price targets on executive compensation. I find that analysts' price targets alter the composition of executive pay between cash-based compensation and stock-based compensation. When analysts forecast a rise (fall) in the share price for a firm, the compensation package tilts toward stock-based (cash-based) compensation. The substitution effect is stronger in companies that have weaker corporate governance. The fourth chapter explores the effect of the introduction of the Sarbanes-Oxley Act (SOX) in 2002 and its reinforcement in 2006 on the options granting process. I show that the introduction of SOX and its reinforcement eliminated the practice of backdating options but increased “spring-loading” of option grants around price targets announcements. Overall, the dissertation shows that price targets provide insights into the determinants of executive pay in favor of the managerial power model.

Model predictive control in thermal management of multiprocessor systems-on-chip

MultiProcessor Systems-on-Chip (MPSoC) are the core of nowadays and next generation computing platforms. Their relevance in the global market continuously increase, occupying an important role both in everydaylife products (e.g. smartphones, tablets, laptops, cars) and in strategical market sectors as aviation, defense, robotics, medicine. Despite of the incredible performance improvements in the recent years processors manufacturers have had to deal with issues, commonly called “Walls”, that have hindered the processors development. After the famous “Power Wall”, that limited the maximum frequency of a single core and marked the birth of the modern multiprocessors system-on-chip, the “Thermal Wall” and the “Utilization Wall” are the actual key limiter for performance improvements. The former concerns the damaging effects of the high temperature on the chip caused by the large power densities dissipation, whereas the second refers to the impossibility of fully exploiting the computing power of the processor due to the limitations on power and temperature budgets. In this thesis we faced these challenges by developing efficient and reliable solutions able to maximize performance while limiting the maximum temperature below a fixed critical threshold and saving energy. This has been possible by exploiting the Model Predictive Controller (MPC) paradigm that solves an optimization problem subject to constraints in order to find the optimal control decisions for the future interval. A fully-distributedMPC-based thermal controller with a far lower complexity respect to a centralized one has been developed. The control feasibility and interesting properties for the simplification of the control design has been proved by studying a partial differential equation thermal model. Finally, the controller has been efficiently included in more complex control schemes able to minimize energy consumption and deal with mixed-criticalities tasks

Optimal Supervisory Control of Hybrid Vehicles

Hybrid vehicles (HV), comprising a conventional ICE-based powertrain and a secondary energy source, to be converted into mechanical power as well, represent a well-established alternative to substantially reduce both fuel consumption and tailpipe emissions of passenger cars. Several HV architectures are either being studied or already available on market, e.g. Mechanical, Electric, Hydraulic and Pneumatic Hybrid Vehicles. Among the others, Electric (HEV) and Mechanical (HSF-HV) parallel Hybrid configurations are examined throughout this Thesis. To fully exploit the HVs potential, an optimal choice of the hybrid components to be installed must be properly designed, while an effective Supervisory Control must be adopted to coordinate the way the different power sources are managed and how they interact. Real-time controllers can be derived starting from the obtained optimal benchmark results. However, the application of these powerful instruments require a simplified and yet reliable and accurate model of the hybrid vehicle system. This can be a complex task, especially when the complexity of the system grows, i.e. a HSF-HV system assessed in this Thesis. The first task of the following dissertation is to establish the optimal modeling approach for an innovative and promising mechanical hybrid vehicle architecture. It will be shown how the chosen modeling paradigm can affect the goodness and the amount of computational effort of the solution, using an optimization technique based on Dynamic Programming. The second goal concerns the control of pollutant emissions in a parallel Diesel-HEV. The emissions level obtained under real world driving conditions is substantially higher than the usual result obtained in a homologation cycle. For this reason, an on-line control strategy capable of guaranteeing the respect of the desired emissions level, while minimizing fuel consumption and avoiding excessive battery depletion is the target of the corresponding section of the Thesis.

Tailoring molecular weight of the conjugated model polymer MEH-PPV and its structure-property relations

In der vorliegenden Arbeit wurden Struktur-Eigenschaftsbeziehungen des konjugierten Modell-Polymers MEH-PPV untersucht. Dazu wurde Fällungs-fraktionierung eingesetzt, um MEH-PPV mit unterschiedlichem Molekulargewicht (Mw) zu erhalten, insbesondere MEH-PPV mit niedrigem Mw, da dieses für optische Wellenleiterbauelemente optimal geeignet ist Wir konnten feststellen, dass die Präparation einer ausreichenden Menge von MEH-PPV mit niedrigem Mw und geringer Mw-Verteilung wesentlich von der geeigneten Wahl des Lösungsmittels und der Temperatur während der Zugabe des Fällungsmittels abhängt. Alternativ dazu wurden UV-induzierte Kettenspaltungseffekte untersucht. Wir folgern aus dem Vergleich beider Vorgehensweisen, dass die Fällungsfraktionierung verglichen mit der UV-Behandlung besser geeignet ist zur Herstellung von MEH-PPV mit spezifischem Mw, da das UV-Licht Kettendefekte längs des Polymerrückgrats erzeugt. 1H NMR and FTIR Spektroskopie wurden zur Untersuchung dieser Kettendefekte herangezogen. Wir konnten außerdem beobachten, dass die Wellenlängen der Absorptionsmaxima der MEH-PPV Fraktionen mit der Kettenlänge zunehmen bis die Zahl der Wiederholeinheiten n  110 erreicht ist. Dieser Wert ist signifikant größer als früher berichtet. rnOptische Eigenschaften von MEH-PPV Wellenleitern wurden untersucht und es konnte gezeigt werden, dass sich die optischen Konstanten ausgezeichnet reproduzieren lassen. Wir haben die Einflüsse der Lösungsmittel und Temperatur beim Spincoaten auf Schichtdicke, Oberflächenrauigkeit, Brechungsindex, Doppelbrechung und Wellenleiter-Dämpfungsverlust untersucht. Wir fanden, dass mit der Erhöhung der Siedetemperatur der Lösungsmittel die Schichtdicke und die Rauigkeit kleiner werden, während Brechungsindex, Doppelbrechung sowie Wellenleiter-Dämpfungsverluste zunahmen. Wir schließen daraus, dass hohe Siedetemperaturen der Lösungsmittel niedrige Verdampfungsraten erzeugen, was die Aggregatbildung während des Spincoatings begünstigt. Hingegen bewirkt eine erhöhte Temperatur während der Schichtpräparation eine Erhöhung von Schichtdicke und Rauhigkeit. Jedoch nehmen Brechungsindex und der Doppelbrechung dabei ab.rn Für die Schichtpräparation auf Glassubstraten und Quarzglas-Fasern kam das Dip-Coating Verfahren zum Einsatz. Die Schichtdicke der Filme hängt ab von Konzentration der Lösung, Transfergeschwindigkeit und Immersionszeit. Mit Tauchbeschichtung haben wir Schichten von MEH-PPV auf Flaschen-Mikroresonatoren aufgebracht zur Untersuchung von rein-optischen Schaltprozessen. Dieses Verfahren erweist sich insbesondere für MEH-PPV mit niedrigem Mw als vielversprechend für die rein-optische Signalverarbeitung mit großer Bandbreite.rn Zusätzlich wurde auch die Morphologie dünner Schichten aus anderen PPV-Derivaten mit Hilfe von FTIR Spektroskopie untersucht. Wir konnten herausfinden, dass der Alkyl-Substitutionsgrad einen starken Einfluss auf die mittlere Orientierung der Polymerrückgrate in dünnen Filmen hat.rn

Leben mit Phenprocoumon — optimal versorgt? : Untersuchung der Qualität und Effektivität der Phenprocoumon-Therapie im ambulanten Sektor

In Deutschland wird zur oralen Vitamin-K-Antagonistentherapie überwiegend der Wirkstoff Phenprocoumon (PPC) eingesetzt und die meisten Patienten werden durch ihren Hausarzt betreut. In einer deskriptiven, nicht-interventionellen Studie wurde die Ist-Situation der Versorgung von PPC-Patienten im ambulanten Sektor untersucht. Ziel war es, die Qualität und Effektivität der bisherigen Standardtherapie zu evaluieren. In Anbetracht der Einführung der neuen oralen Antikoagulantien (NOAC) ist die Untersuchung der PPC-Therapie von besonderem Interesse. Dem „Throughput-Modell“ folgend sollten „Input“- und „Outcome“-Parameter analysiert werden. rnIn einer klinischen Studie wurden 50 ambulant behandelte Patienten mit PPC-Therapie jeweils über einen Zeitraum von 3 Jahren retrospektiv beobachtet. In 5 niedergelassenen Arztpraxen in Rheinland-Pfalz wurden dazu 10 Patienten pro Praxis rekrutiert. Anhand der Patientenakte wurde eine Dokumentenanalyse durchgeführt. Die Selbstmedikation wurde mit einem eigens erstellten Fragebogen erfasst. rnIm Studienkollektiv wurden im Median 3 Comorbiditäten ermittelt. Die mediane Wochendosis betrug 4,0 Tabletten à 3 mg PPC. Die Patienten wurden im Median mit weiteren 15 verschiedenen Wirkstoffen therapiert, einer davon wurde in Selbstmedikation eingenommen. Im gesamten Beobachtungszeitraum fanden pro Patient im Median 57 Arztbesuche statt, die durch die Phenprocoumon-Therapie bedingt waren. INR (International normalized ratio)-Messungen (Median 47) waren der häufigste Grund für die Arztbesuche, so dass ein 3-Wochen-Rhythmus vom Gesamtkollektiv zu 97% erreicht wurde. Die „stabile“ INR-Einstellung wurde im Median nach 94 Tagen erreicht. Die prozentuale Rate (INR (%)) für die Einhaltung des INR-Zielbereiches (ZSB) erreichte internationale Benchmark-Werte, was auf eine gute Versorgungsqualität hindeutete. Die genauere Analyse ergab jedoch große interindividuelle Schwankungen. Während der „stabilen“ INR-Einstellung wurden bessere Ergebnisse als im Gesamtbeobachtungszeitraum erzielt. Drei Patienten (6%) erreichten die „stabile“ INR-Einstellung innerhalb von 3 Jahren nie. Die Auswertung für den erweiterten ZSB (ZSB ± 0,2) ergab bessere INR (%)-Ergebnisse als für den ZSB. Die Zeit im INR-ZSB (TTR (%)) erreichte mit 75% höhere Werte als INR (%) im ZSB mit 70%. Tendenziell war das Patientenkollektiv eher unter- als übertherapiert (Median „Under-INR“ 18% bzw. „Over-INR“ 8%). Erkrankungen und Impfungen stellten die wichtigsten der zahlreichen Einflussfaktoren für INR-Shifts hin zu Werten außerhalb des ZSB dar. Patienten, die Comedikation mit hohem Interaktionspotential einnahmen, erreichten in den INR-Qualitätsindikatoren schlechtere Ergebnisse als Patienten ohne potentiell interagierende Comedikation (Mann-Whitney-U-Test; p-Wert=0,003 für TTR (%), p=0,008 für INR (%)). In Zeitintervallen der „stabilen“ INR-Einstellung war der Unterschied nur für TTR (%) auffällig (Mann-Whitney-U-Test; p=0,015). Für den erweiterten ZSB waren die Unterschiede bezüglich beider INR-Qualitätsindikatoren nicht auffällig. Insgesamt wurden 41 unerwünschte Ereignisse (UAW) beobachtet, davon 24 (59%) in der Phase der „stabilen“ INR-Einstellung (21 leichte Blutungen, 1 schwere Blutung, 2 thromboembolische Ereignisse (TE)). Je 4 leichte Blutungen (19%) wurden in einen möglichen bzw. sicheren kausalen Zusammenhang mit der VKA-Therapie gebracht, wenn ein Zeitintervall von 3 Tagen zwischen der INR-Messung und Auftreten der UAW geprüft wurde. Ein TE wurde als sicher kausal gewertet. Von insgesamt 5 Krankenhausaufenthalten waren 3 bzw. 2 durch Blutungen bzw. TE veranlasst. Des Weiteren wurde im 3-Tage-Zeitintervall für 4 INR-Shifts hin zu Werten außerhalb des ZSB eine Interaktion mit verordneter CM als in sicherem oder möglichem kausalen Zusammenhang bewertet. Bei 49% der beobachteten Grippeimpfungen wurde ein INR-Shift festgestellt, der in ca. 60% der Fälle zu einem subtherapeutischen INR-Wert führte. Insgesamt war das klinische Ergebnis nicht optimal. rnDas „Outcome“ in Form der gesundheitsbezogenen Lebensqualität (LQ) wurde retrospektiv-prospektiv mittels SF-36-Fragebogen ermittelt. Die Patienten zeigten gegenüber der Normalbevölkerung einen Verlust an LQ auf körperlicher Ebene bzw. einen Gewinn auf psychischer Ebene. Das humanistische Ergebnis erfüllte bzw. übertraf damit die Erwartungen. rnInsgesamt wiesen die Ergebnisse darauf hin, dass Qualität und Effektivität der Antikoagulationstherapie mit PPC im ambulanten Sektor weiterer Optimierung bedürfen. Mit intensivierten Betreuungsmodellen lässt sich ein besseres Outcome erzielen. rn

Management control systems : subcomponents, optimal design and the role of time as a contingency

Management Control System (MCS) research is undergoing turbulent times. For a long time related to cybernetic instruments of management accounting only, MCS are increasingly seen as complex systems comprising not only formal accounting-driven instruments, but also informal mechanisms of control based on organizational culture. But not only have the means of MCS changed; researchers increasingly ap-ply MCS to organizational goals other than strategy implementation.rnrnTaking the question of "How do I design a well-performing MCS?" as a starting point, this dissertation aims at providing a comprehensive and integrated overview of the "current-state" of MCS research. Opting for a definition of MCS, broad in terms of means (all formal as well as informal MCS instruments), but focused in terms of objectives (behavioral control only), the dissertation contributes to MCS theory by, a) developing an integrated (contingency) model of MCS, describing its contingencies, as well as its subcomponents, b) refining the equifinality model of Gresov/Drazin (1997), c) synthesizing research findings from contingency and configuration research concerning MCS, taking into account case studies on research topics such as ambi-dexterity, equifinality and time as a contingency.

Analysis and numerical solution of the Peterlin viscoelastic model

Liquids and gasses form a vital part of nature. Many of these are complex fluids with non-Newtonian behaviour. We introduce a mathematical model describing the unsteady motion of an incompressible polymeric fluid. Each polymer molecule is treated as two beads connected by a spring. For the nonlinear spring force it is not possible to obtain a closed system of equations, unless we approximate the force law. The Peterlin approximation replaces the length of the spring by the length of the average spring. Consequently, the macroscopic dumbbell-based model for dilute polymer solutions is obtained. The model consists of the conservation of mass and momentum and time evolution of the symmetric positive definite conformation tensor, where the diffusive effects are taken into account. In two space dimensions we prove global in time existence of weak solutions. Assuming more regular data we show higher regularity and consequently uniqueness of the weak solution. For the Oseen-type Peterlin model we propose a linear pressure-stabilized characteristics finite element scheme. We derive the corresponding error estimates and we prove, for linear finite elements, the optimal first order accuracy. Theoretical error of the pressure-stabilized characteristic finite element scheme is confirmed by a series of numerical experiments.

Efficiency limits for silicon/perovskite tandem solar cells: a theoretical model

The primary goal of this work is related to the extension of an analytic electro-optical model. It will be used to describe single-junction crystalline silicon solar cells and a silicon/perovskite tandem solar cell in the presence of light-trapping in order to calculate efficiency limits for such a device. In particular, our tandem system is composed by crystalline silicon and a perovskite structure material: metilammoniumleadtriiodide (MALI). Perovskite are among the most convenient materials for photovoltaics thanks to their reduced cost and increasing efficiencies. Solar cell efficiencies of devices using these materials increased from 3.8% in 2009 to a certified 20.1% in 2014 making this the fastest-advancing solar technology to date. Moreover, texturization increases the amount of light which can be absorbed through an active layer. Using Green’s formalism it is possible to calculate the photogeneration rate of a single-layer structure with Lambertian light trapping analytically. In this work we go further: we study the optical coupling between the two cells in our tandem system in order to calculate the photogeneration rate of the whole structure. We also model the electronic part of such a device by considering the perovskite top cell as an ideal diode and solving the drift-diffusion equation with appropriate boundary conditions for the silicon bottom cell. We have a four terminal structure, so our tandem system is totally unconstrained. Then we calculate the efficiency limits of our tandem including several recombination mechanisms such as Auger, SRH and surface recombination. We focus also on the dependence of the results on the band gap of the perovskite and we calculare an optimal band gap to optimize the tandem efficiency. The whole work has been continuously supported by a numerical validation of out analytic model against Silvaco ATLAS which solves drift-diffusion equations using a finite elements method. Our goal is to develop a simpler and cheaper, but accurate model to study such devices.

Global Reuse and Optimal Waste Policy

Electronic waste generated from the consumption of durable goods in developed countries is often exported to underdeveloped countries for reuse, recycling and disposal with unfortunate environmental consequences. The lack of efficient disposal policies within developing nations coupled with global free trade agreements make it difficult for consumers to internalize these costs. This paper develops a two-country model, one economically developed and the other underdeveloped, to solve for optimal tax policies necessary to achieve the efficient allocation of economic resources in an economy with a durable good available for global reuse without policy measures in the underdeveloped country. A tax in the developed country on purchases of the new durable good combined with a waste tax set below the domestic external cost of disposal is sufficient for global efficiency. The implication of allowing free global trade in electronic waste is also examined, where optimal policy resembles a global deposit-refund system.

The SURTAVI model: proposal for a pragmatic risk stratification for patients with severe aortic stenosis

Transcatheter aortic valve implantation (TAVI) is a less invasive alternative to surgical aortic valve replacement (SAVR) for patients with symptomatic severe aortic stenosis (AS) and a high operative risk. Risk stratification plays a decisive role in the optimal selection of therapeutic strategies for AS patients. The accuracy of contemporary surgical risk algorithms for AS patients has spurred considerable debate especially in the higher risk patient population. Future trials will explore TAVI in patients at intermediate operative risk. During the design of the SURgical replacement and Transcatheter Aortic Valve Implantation (SURTAVI) trial, a novel concept of risk stratification was proposed based upon age in combination with a fixed number of predefined risk factors, which are relatively prevalent, easy to capture and with a reasonable impact on operative mortality. Retrospective application of this algorithm to a contemporary academic practice dealing with clinically significant AS patients allocates about one-fourth of these patients as being at intermediate operative risk. Further testing is required for validation of this new paradigm in risk stratification. Finally, the Heart Team, consisting of at least an interventional cardiologist and cardiothoracic surgeon, should have the decisive role in determining whether a patient could be treated with TAVI or SAVR.

The Choice of Expedient Regulatory Controls on Housing Market Using Short-Term Equilibria Model

Khutoretsky dealt with the problem of maximising a linear utility function (MUF) over the set of short-term equilibria in a housing market by reducing it to a linear programming problem, and suggested a combinatorial algorithm for this problem. Two approaches to the market adjustment were considered: the funding of housing construction and the granting of housing allowances. In both cases, locally optimal regulatory measures can be developed using the corresponding dual prices. The optimal effects (with the regulation expenditures restricted by an amount K) can be found using specialised models based on MUF: a model M1 for choice of the optimum structure of investment in housing construction, and a model M2 for optimum distribution of housing allowances. The linear integer optimisation problems corresponding to these models are initially difficult but can be solved after slight modifications of the parameters. In particular, the necessary modification of K does not exceed the maximum construction cost of one dwelling (for M1) or the maximum size of one housing allowance (for M2). The result is particularly useful since slight modification of K is not essential in practice.