Relação solo-paisagem-material de origem e gênese de alguns solos no domínio do "Mar de Morros", Minas Gerais

Pouco se conhece sobre os solos desenvolvidos ou influenciados por materiais máficos na Zona da Mata de Minas Gerais, embora muitos estudos tenham sido efetuados nos domínios cristalinos gnáissicos, notadamente com Latossolos e Podzólicos de terraço. Para preencher esta lacuna, foram amostrados os horizontes A e B ou A e C de solos em duas topolitosseqüências. A primeira, localizada na Serra de Guiricema, com drenagem orientada para a bacia do Rio Paraíba do Sul, compreendeu um Latossolo Vermelho-Amarelo (LVA) no topo da serra, um Chernossolo Argilúvico (MT), um Vertissolo (V) e um Nitossolo Vermelho (NV) no terço médio. Da segunda topolitosseqüência, localizada na Depressão de Ponte Nova, com drenagem para a bacia do Rio Doce, fizeram parte um Latossolo Vermelho-Amarelo, dois Nitossolos Vermelhos, um Chernossolo Argilúvico, um Argissolo Vermelho-Amarelo (PVA), um Gleissolo (GX) e um Neossolo Flúvico (RU). Adicionalmente, foi coletado, no Planalto de Viçosa, o horizonte B de um Latossolo Vermelho-Amarelo sobre intrusão de anfibolito, fora das duas topolitosseqüências já citadas, para efeito de comparação. Os solos desenvolvidos a partir dos anfibolitos/diabásio (NV, MT e V) tenderam a ser eutróficos e cauliníticos, com a participação de argilominerais 2:1 (ilita e esmectita, possivelmente como interestratificados), quando menos intemperizados. A baixa relação Feo/Fed nos Latossolos estudados indica o predomínio de formas de ferro de maior grau de cristalinidade, sendo mais elevada no caso dos Nitossolos, em consonância com o menor grau de evolução destes. O Latossolo coletado sobre dique de material máfico apresentou características químicas similares às dos Latossolos desenvolvidos de gnaisse da região, indicando tratar-se de solo proveniente desta rocha, cobrindo o dique como material retrabalhado. A biotita e o anfibólio presentes no gnaisse são os minerais que contribuem para os teores de Fe2O3 acima de 11 dag kg-1, nos Latossolos da região estudada. Os solos com argila de atividade alta (V e MT) têm a gênese e a estabilidade da esmectita e, possivelmente, do interestratificado ilita-esmectita, explicadas pela riqueza do material de origem em minerais ferromagnesianos, pelo relevo que propicia ambiente concentrador e, em certos casos, pela exposição norte do perfil, favorecendo maior evapotranspiração. No caso do Gleissolo, tanto o ambiente concentrador como a drenagem deficiente parecem ser as causas principais da ocorrência de argilominerais 2:1 expansivos. O Argissolo Vermelho-Amarelo, ainda que também ocorra em ambiente concentrador de terraço, não apresentou argilominerais 2:1, destacando-se, entretanto, os altos teores de Fe2O3 destes solos, o que confirma os resultados obtidos por outros autores para solos semelhantes na região de Viçosa.

Estudo de toposseqüência da Baixada Litorânea Fluminense: efeitos do material de origem e posição topográfica

A influência dos materiais de origem, rochas do Pré-Cambriano e sedimentos coluviais e aluvionares delas derivados, e da posição topográfica na gênese de solos foi estudada em uma toposseqüência representativa das feições geomorfológicas da Baixada Litorânea Fluminense (RJ), no campus da Universidade Federal Rural do Rio de Janeiro (UFRRJ). Foram analisados seis perfis de solo, localizados no terço superior (P1 e P2), médio (P3) e inferior da encosta (P4 e P5), e na baixada (P6). Os processos pedogenéticos e as características dos solos foram relacionados com as unidades geomorfológicas e litoestratigráficas descritas na região. Os perfis P1 e P2, formados 'in situ' a partir do regolito do gnaisse, têm elevada saturação por bases, textura média/argilosa e minerais primários facilmente intemperizáveis na fração areia (micas e feldspatos). O P3, relacionado com uma rampa de colúvio, difere dos anteriores pela elevada saturação por alumínio e ausência de minerais primários facilmente intemperizáveis. P4 e P5, também formados de colúvio, diferem do P3 pela textura superficial arenosa e presença de horizonte E sobrejacente a fragipã. O P6, originado de sedimentos colúvio-aluvionais, tem cores cinzentas, estrutura maciça, textura argilosa e baixa saturação por bases. Os perfis foram classificados como Argissolo (P1, P2 e P3), Planossolo (P4 e P5) e Gleissolo (P6).

Mobilidade de íons em solo ácido com aplicação de calcário, ácido orgânico e material vegetal em superfície

Há controvérsias quanto à eficiência da correção da acidez da camada subsuperficial pela aplicação de calcário na presença de materiais vegetais de plantas de cobertura e faltam informações sobre os mecanismos envolvidos no processo. O objetivo deste estudo foi quantificar a contribuição dos materiais vegetais de plantas de cobertura, com ênfase nos seus conteúdos de ácidos orgânicos de baixa massa molar e nutrientes solúveis, sobre a mobilização, no perfil do solo, dos produtos da dissolução do calcário aplicado em superfície. Foram desenvolvidos dois experimentos em laboratório, usando colunas de PVC de 30 cm de altura com amostras deformadas de um Latossolo Vermelho textura muito argilosa. Os tratamentos constituíram-se da aplicação isolada ou conjunta de calcário para atingir 80 % de saturação por bases (6,1 t ha-1) e de materiais vegetais (20 t ha-1) de nabo forrageiro e aveia-preta, bem como de soluções de ácidos orgânicos e sais neutros aproximadamente equivalentes ao conteúdo dessas espécies. A calagem isolada ou em associação com os materiais vegetais promoveu a redução da acidez somente na camada superficial (0-8 cm). A baixa taxa de recuperação dos ácidos orgânicos adicionados (< 7,2 %) indica que essas substâncias presentes na massa seca do nabo forrageiro foram rapidamente degradadas por microrganismos ou adsorvidas aos colóides do solo, tendo pouca influência na mobilização de cátions. Parte substancial do efeito sobre a mobilização de íons pela aplicação de material vegetal de nabo forrageiro se deveu à composição química do material, em vista da alta solubilidade em água dos cátions (65 a 71 %) e ânions (84 %). Além disso, a solução de sais foi o tratamento mais eficiente para deslocar o Al do solo para as soluções percoladas. A adição de materiais vegetais teve pouca influência na mobilização no perfil do solo dos produtos da dissolução do calcário aplicado em superfície.

Plantillas para la creación de material docente accesible con herramientas ofimáticas y LaTex

Existen distintos tipos de dificultades de accesibilidad entre los alumnos que cursan sus estudios en nuestras facultades. Podemos encontrar por ejemplo algunos alumnos ciegos o con diferentes grados de baja visión, incluyendo los problemas debidos a la edad (presbicia o vista cansada), también alumnos con trastornos de aprendizaje como dislexia o TDAH o alumnos que sufren dificultades de acceso derivadas de los dispositivos que usan para la conexión (con pantallas muy pequeñas). La accesibilidad, como disciplina, pretende mejorar las condiciones de acceso a la información de todos ellos.El proyecto “Recursos docentes accesibles” (2010-2012), en el marco del Programa de Mejora e Innovación Docente de la Universidad de Barcelona, se centra en la baja visión y en la dislexia. El objetivo principal es crear y poner a disposición de todo el profesorado y de los responsables académicos de las titulaciones de la Universidad de Barcelona un conjunto de plantillas y modelos de documentos docentes accesibles en origen y fácilmente transformables a versiones ampliadas o mejoradas. El proyecto se desarrolla en la Facultad de Biblioteconomía y Documentación y la Facultad de Matemáticas y ha contado con la colaboración de numerosos docentes. La previsión es extender este proyecto a otras universidades con la esperanza que, entre todos, podamos mejorar los problemas de accesibilidad de los documentos docentes.

Modelo digital de elevação na caracterização de solos desenvolvidos de basalto e material arenítico

Os levantamentos de solos são na maioria antigos e pouco detalhados, geralmente nos níveis exploratório e de reconhecimento. Isso pode ser explicado pelo fato de que o método tradicional de levantamento de solos é lento e caro, requerendo grande número de observações de campo. Assim, o presente trabalho teve como objetivo caracterizar unidades de mapeamento de solos das regiões de Ibaté e São Carlos, SP, desenvolvidos de materiais basálticos e areníticos em função da declividade e altitudes correspondentes, com base em modelo digital de elevação (MDE). Primeiramente, foi feito um mapa de solos semidetalhado pelo método tradicional. Posteriormente, utilizando-se curvas de nível da região, foi elaborado o MDE, do qual foram extraídos mapas com diferentes classes de declividade e elevação. Por meio da tabulação cruzada, foi determinada a incidência de cada solo nas respectivas classes de declives e altitudes. Cada solo apresentou comportamento diferenciado em relação às classes de declive. Contudo, nas faixas limítrofes de declividade pode ocorrer sobreposição de dois ou mais solos. Na referida região, o Latossolo Amarelo encontra-se predominantemente nas regiões mais altas e de relevo plano; entretanto, solos pouco intemperizados, como os Neossolos Litólicos, aparecem em diferentes faixas de declividade. Conclui-se que o conhecimento da distribuição dos solos no relevo é de grande importância, pois facilita a execução do levantamento de solos. O modelo de elevação apresenta semelhanças com o mapa de solos, podendo auxiliar na sua determinação. As variações de solo, no entanto, são mais complexas, não dispensando as observações de campo.

Organic material decomposition and nutrient dynamics in a mulch system enriched with leguminous trees in the Amazon

The new techniques proposed for agriculture in the Amazon region include rotational fallow systems enriched with leguminous trees and the replacement of biomass burning by mulching. Decomposition and nutrient release from mulch were studied using fine-mesh litterbags with five different leguminous species and the natural fallow vegetation as control. Samples from each treatment were analyzed for total C, N, P, K, Ca, Mg, lignin, cellulose content and soluble polyphenol at different sampling times over the course of one year. The decomposition rate constant varied with species and time. Weight loss from the decomposed litter bag material after 96 days was 30.1 % for Acacia angustissima, 32.7 % for Sclerolobium paniculatum, 33.9 % for Iinga edulis and the Fallow vegetation, 45.2 % for Acacia mangium and 63.6 % for Clitoria racemosa. Immobilization of N and P was observed in all studied treatments. Nitrogen mineralization was negatively correlated with phenol, C-to-N ratio, lignin + phenol/N ratio, and phenol/phosphorus ratios and with N content in the litterbag material. After 362 days of field incubation, an average (of all treatments), 3.3 % K, 32.2 % Ca and 22.4 % Mg remained in the mulch. Results confirm that low quality and high amount of organic C as mulch application are limiting for the quantity of energy available for microorganisms and increase the nutrient immobilization for biomass decomposition, which results in competition for nutrients with the crop plants.

Force volume and stiffness tomography investigation on the dynamics of stiff material under bacterial membranes.

The determination of the characteristics of micro-organisms in clinical specimens is essential for the rapid diagnosis and treatment of infections. A thorough investigation of the nanoscale properties of bacteria can prove to be a fundamental tool. Indeed, in the latest years, the importance of high resolution analysis of the properties of microbial cell surfaces has been increasingly recognized. Among the techniques available to observe at high resolution specific properties of microscopic samples, the Atomic Force Microscope (AFM) is the most widely used instrument capable to perform morphological and mechanical characterizations of living biological systems. Indeed, AFM can routinely study single cells in physiological conditions and can determine their mechanical properties with a nanometric resolution. Such analyses, coupled with high resolution investigation of their morphological properties, are increasingly used to characterize the state of single cells. In this work, we exploit the capabilities and peculiarities of AFM to analyze the mechanical properties of Escherichia coli in order to evidence with a high spatial resolution the mechanical properties of its structure. In particular, we will show that the bacterial membrane is not mechanically uniform, but contains stiffer areas. The force volume investigations presented in this work evidence for the first time the presence and dynamics of such structures. Such information is also coupled with a novel stiffness tomography technique, suggesting the presence of stiffer structures present underneath the membrane layer that could be associated with bacterial nucleoids.

Documentary material relating to the history of Iowa - Volume 1, 1895.

Benjamin F. Shambaugh edited and compiled documents and publications for this book on the history of Iowa. This volume 1 includes documentary material from the Louisiana Purchase, the Territories of the Northwest, Wisconsin and Iowa; the Convention of 1857;the Iowa Constitution of 1846 and the Ratification of Constitutional Amendments.

Documentary material relating to the history of Iowa - Volume 2, 1896.

Benjamin F. Shambaugh edited and compiled documents and publications for this book on the history of Iowa. This volume 2 is concerned with the history of local political organizations and documents illustrative of the development of local government in the Territory of the Northwest from 1787 to 1800, in the Territory of Indiana from 1800 to 1805 and in the Territory of Michigan from 1805 to September 6, 1834.

Documentary material relating to the history of Iowa - Volume 3, 1896.

Benjamin F. Shambaugh edited and compiled documents and publications for this book on the history of Iowa. This volume 3 is a continuation of volume 2 which is concerned with the history of local political organization from 1787 to 1834. Documents are illustrative of the development of local government in Iowa from the establishment of the Territory of Wisconsin in 1836 to the revision of the statutes of Iowa in 1842-43. It includes documentary material from the Louisiana Purchase, the Territories of the Northwest, Wisconsin and Iowa; the Convention of 1857; the Iowa Constitution of 1846 and the Ratification of Constitutional Amendments.

Assessment of the occurrence of nanoparticles in Swiss industry and evaluation of the appropriatenesss of the measurement devices to determine the workforce exposure

Abstract : The occupational health risk involved with handling nanoparticles is the probability that a worker will experience an adverse health effect: this is calculated as a function of the worker's exposure relative to the potential biological hazard of the material. Addressing the risks of nanoparticles requires therefore knowledge on occupational exposure and the release of nanoparticles into the environment as well as toxicological data. However, information on exposure is currently not systematically collected; therefore this risk assessment lacks quantitative data. This thesis aimed at, first creating the fundamental data necessary for a quantitative assessment and, second, evaluating methods to measure the occupational nanoparticle exposure. The first goal was to determine what is being used where in Swiss industries. This was followed by an evaluation of the adequacy of existing measurement methods to assess workplace nanopaiticle exposure to complex size distributions and concentration gradients. The study was conceived as a series of methodological evaluations aimed at better understanding nanoparticle measurement devices and methods. lt focused on inhalation exposure to airborne particles, as respiration is considered to be the most important entrance pathway for nanoparticles in the body in terms of risk. The targeted survey (pilot study) was conducted as a feasibility study for a later nationwide survey on the handling of nanoparticles and the applications of specific protection means in industry. The study consisted of targeted phone interviews with health and safety officers of Swiss companies that were believed to use or produce nanoparticles. This was followed by a representative survey on the level of nanoparticle usage in Switzerland. lt was designed based on the results of the pilot study. The study was conducted among a representative selection of clients of the Swiss National Accident Insurance Fund (SUVA), covering about 85% of Swiss production companies. The third part of this thesis focused on the methods to measure nanoparticles. Several pre- studies were conducted studying the limits of commonly used measurement devices in the presence of nanoparticle agglomerates, This focus was chosen, because several discussions with users and producers of the measurement devices raised questions about their accuracy measuring nanoparticle agglomerates and because, at the same time, the two survey studies revealed that such powders are frequently used in industry. The first preparatory experiment focused on the accuracy of the scanning mobility particle sizer (SMPS), which showed an improbable size distribution when measuring powders of nanoparticle agglomerates. Furthermore, the thesis includes a series of smaller experiments that took a closer look at problems encountered with other measurement devices in the presence of nanoparticle agglomerates: condensation particle counters (CPC), portable aerosol spectrometer (PAS) a device to estimate the aerodynamic diameter, as well as diffusion size classifiers. Some initial feasibility tests for the efficiency of filter based sampling and subsequent counting of carbon nanotubes (CNT) were conducted last. The pilot study provided a detailed picture of the types and amounts of nanoparticles used and the knowledge of the health and safety experts in the companies. Considerable maximal quantities (> l'000 kg/year per company) of Ag, Al-Ox, Fe-Ox, SiO2, TiO2, and ZnO (mainly first generation particles) were declared by the contacted Swiss companies, The median quantity of handled nanoparticles, however, was 100 kg/year. The representative survey was conducted by contacting by post mail a representative selection of l '626 SUVA-clients (Swiss Accident Insurance Fund). It allowed estimation of the number of companies and workers dealing with nanoparticles in Switzerland. The extrapolation from the surveyed companies to all companies of the Swiss production sector suggested that l'309 workers (95%-confidence interval l'073 to l'545) of the Swiss production sector are potentially exposed to nanoparticles in 586 companies (145 to l'027). These numbers correspond to 0.08% (0.06% to 0.09%) of all workers and to 0.6% (0.2% to 1.1%) of companies in the Swiss production sector. To measure airborne concentrations of sub micrometre-sized particles, a few well known methods exist. However, it was unclear how well the different instruments perform in the presence of the often quite large agglomerates of nanostructured materials. The evaluation of devices and methods focused on nanoparticle agglomerate powders. lt allowed the identification of the following potential sources of inaccurate measurements at workplaces with considerable high concentrations of airborne agglomerates: - A standard SMPS showed bi-modal particle size distributions when measuring large nanoparticle agglomerates. - Differences in the range of a factor of a thousand were shown between diffusion size classifiers and CPC/SMPS. - The comparison between CPC/SMPS and portable aerosol Spectrometer (PAS) was much better, but depending on the concentration, size or type of the powders measured, the differences were still of a high order of magnitude - Specific difficulties and uncertainties in the assessment of workplaces were identified: the background particles can interact with particles created by a process, which make the handling of background concentration difficult. - Electric motors produce high numbers of nanoparticles and confound the measurement of the process-related exposure. Conclusion: The surveys showed that nanoparticles applications exist in many industrial sectors in Switzerland and that some companies already use high quantities of them. The representative survey demonstrated a low prevalence of nanoparticle usage in most branches of the Swiss industry and led to the conclusion that the introduction of applications using nanoparticles (especially outside industrial chemistry) is only beginning. Even though the number of potentially exposed workers was reportedly rather small, it nevertheless underscores the need for exposure assessments. Understanding exposure and how to measure it correctly is very important because the potential health effects of nanornaterials are not yet fully understood. The evaluation showed that many devices and methods of measuring nanoparticles need to be validated for nanoparticles agglomerates before large exposure assessment studies can begin. Zusammenfassung : Das Gesundheitsrisiko von Nanopartikel am Arbeitsplatz ist die Wahrscheinlichkeit dass ein Arbeitnehmer einen möglichen Gesundheitsschaden erleidet wenn er diesem Stoff ausgesetzt ist: sie wird gewöhnlich als Produkt von Schaden mal Exposition gerechnet. Für eine gründliche Abklärung möglicher Risiken von Nanomaterialien müssen also auf der einen Seite Informationen über die Freisetzung von solchen Materialien in die Umwelt vorhanden sein und auf der anderen Seite solche über die Exposition von Arbeitnehmenden. Viele dieser Informationen werden heute noch nicht systematisch gesarnmelt und felilen daher für Risikoanalysen, Die Doktorarbeit hatte als Ziel, die Grundlagen zu schaffen für eine quantitative Schatzung der Exposition gegenüber Nanopartikel am Arbeitsplatz und die Methoden zu evaluieren die zur Messung einer solchen Exposition nötig sind. Die Studie sollte untersuchen, in welchem Ausmass Nanopartikel bereits in der Schweizer Industrie eingesetzt werden, wie viele Arbeitnehrner damit potentiel] in Kontakt komrrien ob die Messtechnologie für die nötigen Arbeitsplatzbelastungsmessungen bereits genügt, Die Studie folcussierte dabei auf Exposition gegenüber luftgetragenen Partikel, weil die Atmung als Haupteintrittspforte iïlr Partikel in den Körper angesehen wird. Die Doktorarbeit besteht baut auf drei Phasen auf eine qualitative Umfrage (Pilotstudie), eine repräsentative, schweizerische Umfrage und mehrere technische Stndien welche dem spezitischen Verständnis der Mëglichkeiten und Grenzen einzelner Messgeräte und - teclmikeri dienen. Die qualitative Telephonumfrage wurde durchgeführt als Vorstudie zu einer nationalen und repräsentativen Umfrage in der Schweizer Industrie. Sie zielte auf Informationen ab zum Vorkommen von Nanopartikeln, und den angewendeten Schutzmassnahmen. Die Studie bestand aus gezielten Telefoninterviews mit Arbeit- und Gesundheitsfachpersonen von Schweizer Unternehmen. Die Untemehmen wurden aufgrund von offentlich zugànglichen lnformationen ausgewählt die darauf hinwiesen, dass sie mit Nanopartikeln umgehen. Der zweite Teil der Dolctorarbeit war die repräsentative Studie zur Evalniernng der Verbreitnng von Nanopaitikelanwendungen in der Schweizer lndustrie. Die Studie baute auf lnformationen der Pilotstudie auf und wurde mit einer repräsentativen Selektion von Firmen der Schweizerischen Unfall Versicherungsanstalt (SUVA) durchgeüihxt. Die Mehrheit der Schweizerischen Unternehmen im lndustrieselctor wurde damit abgedeckt. Der dritte Teil der Doktorarbeit fokussierte auf die Methodik zur Messung von Nanopartikeln. Mehrere Vorstudien wurden dnrchgefîihrt, um die Grenzen von oft eingesetzten Nanopartikelmessgeräten auszuloten, wenn sie grösseren Mengen von Nanopartikel Agglomeraten ausgesetzt messen sollen. Dieser F okns wurde ans zwei Gründen gewählt: weil mehrere Dislcussionen rnit Anwendem und auch dem Produzent der Messgeràte dort eine Schwachstelle vermuten liessen, welche Zweifel an der Genauigkeit der Messgeräte aufkommen liessen und weil in den zwei Umfragestudien ein häufiges Vorkommen von solchen Nanopartikel-Agglomeraten aufgezeigt wurde. i Als erstes widmete sich eine Vorstndie der Genauigkeit des Scanning Mobility Particle Sizer (SMPS). Dieses Messgerät zeigte in Präsenz von Nanopartikel Agglorneraten unsinnige bimodale Partikelgrössenverteilung an. Eine Serie von kurzen Experimenten folgte, welche sich auf andere Messgeräte und deren Probleme beim Messen von Nanopartikel-Agglomeraten konzentrierten. Der Condensation Particle Counter (CPC), der portable aerosol spectrometer (PAS), ein Gerät zur Schàtzung des aerodynamischen Durchniessers von Teilchen, sowie der Diffusion Size Classifier wurden getestet. Einige erste Machbarkeitstests zur Ermittlnng der Effizienz von tilterbasierter Messung von luftgetragenen Carbon Nanotubes (CNT) wnrden als letztes durchgeiührt. Die Pilotstudie hat ein detailliiertes Bild der Typen und Mengen von genutzten Nanopartikel in Schweizer Unternehmen geliefert, und hat den Stand des Wissens der interviewten Gesundheitsschntz und Sicherheitsfachleute aufgezeigt. Folgende Typen von Nanopaitikeln wurden von den kontaktierten Firmen als Maximalmengen angegeben (> 1'000 kg pro Jahr / Unternehrnen): Ag, Al-Ox, Fe-Ox, SiO2, TiO2, und ZnO (hauptsächlich Nanopartikel der ersten Generation). Die Quantitäten von eingesetzten Nanopartikeln waren stark verschieden mit einem ein Median von 100 kg pro Jahr. ln der quantitativen Fragebogenstudie wurden l'626 Unternehmen brieflich kontaktiert; allesamt Klienten der Schweizerischen Unfallversicherringsanstalt (SUVA). Die Resultate der Umfrage erlaubten eine Abschätzung der Anzahl von Unternehmen und Arbeiter, welche Nanopartikel in der Schweiz anwenden. Die Hochrechnung auf den Schweizer lndnstriesektor hat folgendes Bild ergeben: ln 586 Unternehmen (95% Vertrauensintervallz 145 bis 1'027 Unternehmen) sind 1'309 Arbeiter potentiell gegenüber Nanopartikel exponiert (95%-Vl: l'073 bis l'545). Diese Zahlen stehen für 0.6% der Schweizer Unternehmen (95%-Vl: 0.2% bis 1.1%) und 0.08% der Arbeiternehmerschaft (95%-V1: 0.06% bis 0.09%). Es gibt einige gut etablierte Technologien um die Luftkonzentration von Submikrometerpartikel zu messen. Es besteht jedoch Zweifel daran, inwiefern sich diese Technologien auch für die Messurrg von künstlich hergestellten Nanopartikeln verwenden lassen. Aus diesem Grund folcussierten die vorbereitenden Studien für die Arbeitsplatzbeurteilnngen auf die Messung von Pulverri, welche Nan0partike1-Agg10merate enthalten. Sie erlaubten die ldentifikation folgender rnöglicher Quellen von fehlerhaften Messungen an Arbeitsplätzen mit erhöhter Luft-K0nzentrati0n von Nanopartikel Agglomeratenz - Ein Standard SMPS zeigte eine unglaubwürdige bimodale Partikelgrössenverteilung wenn er grössere Nan0par'til<e1Agg10merate gemessen hat. - Grosse Unterschiede im Bereich von Faktor tausend wurden festgestellt zwischen einem Diffusion Size Classiîier und einigen CPC (beziehungsweise dem SMPS). - Die Unterschiede zwischen CPC/SMPS und dem PAS waren geringer, aber abhängig von Grosse oder Typ des gemessenen Pulvers waren sie dennoch in der Grössenordnung von einer guten Grössenordnung. - Spezifische Schwierigkeiten und Unsicherheiten im Bereich von Arbeitsplatzmessungen wurden identitiziert: Hintergrundpartikel können mit Partikeln interagieren die während einem Arbeitsprozess freigesetzt werden. Solche Interaktionen erschweren eine korrekte Einbettung der Hintergrunds-Partikel-Konzentration in die Messdaten. - Elektromotoren produzieren grosse Mengen von Nanopartikeln und können so die Messung der prozessbezogenen Exposition stören. Fazit: Die Umfragen zeigten, dass Nanopartikel bereits Realitàt sind in der Schweizer Industrie und dass einige Unternehmen bereits grosse Mengen davon einsetzen. Die repräsentative Umfrage hat diese explosive Nachricht jedoch etwas moderiert, indem sie aufgezeigt hat, dass die Zahl der Unternehmen in der gesamtschweizerischen Industrie relativ gering ist. In den meisten Branchen (vor allem ausserhalb der Chemischen Industrie) wurden wenig oder keine Anwendungen gefunden, was schliessen last, dass die Einführung dieser neuen Technologie erst am Anfang einer Entwicklung steht. Auch wenn die Zahl der potentiell exponierten Arbeiter immer noch relativ gering ist, so unterstreicht die Studie dennoch die Notwendigkeit von Expositionsmessungen an diesen Arbeitsplätzen. Kenntnisse um die Exposition und das Wissen, wie solche Exposition korrekt zu messen, sind sehr wichtig, vor allem weil die möglichen Auswirkungen auf die Gesundheit noch nicht völlig verstanden sind. Die Evaluation einiger Geräte und Methoden zeigte jedoch, dass hier noch Nachholbedarf herrscht. Bevor grössere Mess-Studien durgefîihrt werden können, müssen die Geräte und Methodem für den Einsatz mit Nanopartikel-Agglomeraten validiert werden.

Use of steel slag to neutralize acid mine drainage (AMD) in sulfidic material from a uranium mine

Acid Mine Drainage (AMD) is one of the main environmental impacts caused by mining. Thus, innovative mitigation strategies should be exploited, to neutralize acidity and prevent mobilization of trace elements in AMD. The use of industrial byproducts has been considered an economically and environmentally effective alternative to remediate acid mine drainage. Therefore, the objective of this study was to evaluate the use of steel slag to mitigate acid mine drainage in a sulfidic material from a uranium mine, as an alternative to the use of limestone. Thus, increasing doses of two neutralizing agents were applied to a sulfidic material from the uranium mine Osamu Utsumi in Caldas, Minas Gerais State. A steel slag from the company ArcelorMittal Tubarão and a commercial limestone were used as neutralizing agents. The experiment was conducted in leaching columns, arranged in a completely randomized, [(2 x 3) + 1] factorial design, consisting of two neutralizing agents, three doses and one control, in three replications, totaling 21 experimental units. Electrical conductivity (EC), pH and the concentrations of Al, As, Ca, Cd, Cu, Fe, Mn, Ni, S, Se, and Zn were evaluated in the leached solutions. The trace element concentration was evaluated by ICP-OES. Furthermore, the CO2 emission was measured at the top of the leaching columns by capturing in NaOH solution and titration with HCl, in the presence of BaCl2. An increase in the pH of the leachate was observed for both neutralizing agents, with slightly higher values for steel slag. The EC was lower at the higher lime dose at an early stage of the experiment, and CO2 emission was greater with the use of limestone compared to steel slag. A decrease in trace element mobilization in the presence of both neutralizing agents was also observed. Therefore, the results showed that the use of steel slag is a suitable alternative to mitigate AMD, with the advantage of reducing CO2 emissions to the atmosphere compared to limestone.