Studies on the fracture behaviour of polymer blends with special reference to PP/HDPE and PS/HIPS blends

Investigations on the fracture behaviour of polymer blends is the topic of this thesis. The blends selected are PP/HDPE and PS/HIPS. PP/HDPE blend is chosen due to its commercial importance and PS/HIPS blend is selected to study the transition from brittle fracture to ductile fracture.PP/HDPE blends were prepared at different compositions by melt blending at 180°C and fracture failure process was investigated by conducting notch sensitivity test and tensile test at different strain rates. The effects of two types of modifiers (particulate and elastomer) on the fracture behaviour and notch sensitivity of PP/HDPE blends were studied. The modifiers used are calcium carbonate, a hard particulate filler commonly used in plastics and Ethylene Propylene Diene Monomer (EPDM). They were added in 2%, 4% and 6% by weight of the blends.The study shows that the mechanical properties of PP/HDPE blends can be optimized by selecting proper blend compositions. The selected modifiers are found to alter and improve the fracture behaviour and notch sensitivity of the blends. Particulate fillers like calcium carbonate can be used for making the mechanical behaviour more stable at the various blend compositions. The resistance to notch sensitivity of the blends is found to be marginally lower in the presence of calcium carbonate. The elastomeric modifier EPDM produces a better stability of the mechanical behaviour. A low concentration of EPDM is sufficient to effect such a change. EPDM significantly improves the resistance to notch sensitivity of the blends. The study shows that judicious selection of modifiers can improve the fracture behaviour and notch sensitivity of PP/HDPE blends and help these materials to be used for critical applications.For investigating the transition in fracture behaviour and failure modes, PS/HIPS blends were selected. The blends were prepared by melt mixing followed by injection moulding to prepare the specimens for conducting tensile, impact and flexure tests. These tests were used to simulate the various conditions which promote failure.The tensile behaviour of unnotched and notched PS/HIPS blend samples were evaluated at slow speeds. Tensile strengths and moduli were found to increase at the higher testing speed for all the blend combinations whereas maximum strain at break was found to decrease. For a particular speed of testing, the tensile strength and modulus show only a very slight decrease as HIPS content is increased up to about 40%. However, there is a drastic decrease on increasing the HIPS content thereafter.The maximum strain at break shows only a very slight change up to about 40% HIPS content and thereafter shows a remarkable increase. The notched specimens also follow a comparable trend even though the notch sensitivity is seen high for PS rich blends containing up to 40% HIPS. The notch sensitivity marginally decreases with increase in HIPS content. At the same time, it is found to increase with the increase in strain rate. It is observed that blends containing more than 40% HIPS fail in ductile mode.The impact characteristics of PSIHIPS blends studied were impact strength, the energy absorbed by the test specimen and impact toughness. Remarkable increase in impact strength is observed as HIPS content in the blend exceeds 40%. The energy absorbed by the test specimens and the impact toughness also show a comparable trend.Flexural testing which helps to characterize the load bearing capacity was conducted on PS/HIPS blend samples at the two different testing speeds of 5mmlmin and 10 mm/min. The flexural strength increases with increase in testing speed for all the blend compositions. At both the speeds, remarkable reduction in flexural strength is observed as HIPS content in the blend exceeds 40%. The flexural strain and flexural energy absorbed by the specimens are found to increase with increase in HIPS content. At both the testing speeds, brittle fracture is observed for PS rich blends whereas HIPS rich blends show ductile mode of failure.Photoelastic investigations were conducted on PS/HIPS blend samples to analyze their failure modes. A plane polariscope with a broad source of light was utilized for the study. The coloured isochromatic fringes formed indicate the presence of residual stress concentration in the blend samples. The coverage made by the fringes on the test specimens varies with the blend composition and it shows a reducing trend with the increase in HIPS content. This indicates that the presence of residual stress is a contributing factor leading to brittle fracture in PS rich blends and this tendency gradually falls with increase in HIPS content and leads to their ductile mode of failure.

Optimisation of the Mechanical Properties of HDPE/PP Blends and Their Recyclable Composites

This study was undertaken in order to upgrade blends of HDPE and PP, two of the most widely used standard plastics so as to widen their application spectrum. Dicumyl peroxide was used as the modifier for the upgradation. Optimum concentration of dicumyl peroxide required for modification was detennined by measurement of mechanical, rheological, thermal and morphological properties. Selected blends were used to prepare recyclable composites with nylon clothes by compression moulding. The composites were characterized by measurement of mechanical and thermal properties. The composites were recycled and the mechanical propertics of the recycled material were determined.

Modification of Phenol Formaldehyde Resin for Improved Mechanical Properties

Phenolic resins suffer from the presence of microvoids on curing. This often leads to less than satisfactory properties in the cured resin. This disadvantage has limited the use of phenolic resins to some extent. This study is an attempt to improve the mechanical properties of the phenolic resol resins by chemical modification aimed at reducing the microvoid population. With this end in view various themoset resins synthesised under predetennined conditions have been employed for modifying phenolic resols. Such resins include unsaturated polyester, epoxy and epoxy novolac prepolymers. The results establish the effectiveness of these resins for improving the mechanical properties of phenolics. Experimental and analytical techniques used include FTIR, DMA, TGA, SEM and mechanical property evaluation. While most of the modifier resins employed give positive results the effect of adding UP is found to be surprising as well as impressive.

Modification of Polypropylene/High Density Polyethylene Blend Using Nanokaolinite Clay and E-Glass Fibre: Preparation, Characterization and Micromechanical Modelling

Upgrading two widely used standard plastics, polypropylene (PP) and high density polyethylene (HDPE), and generating a variety of useful engineering materials based on these blends have been the main objective of this study. Upgradation was effected by using nanomodifiers and/or fibrous modifiers. PP and HDPE were selected for modification due to their attractive inherent properties and wide spectrum of use. Blending is the engineered method of producing new materials with tailor made properties. It has the advantages of both the materials. PP has high tensile and flexural strength and the HDPE acts as an impact modifier in the resultant blend. Hence an optimized blend of PP and HDPE was selected as the matrix material for upgradation. Nanokaolinite clay and E-glass fibre were chosen for modifying PP/HDPE blend. As the first stage of the work, the mechanical, thermal, morphological, rheological, dynamic mechanical and crystallization characteristics of the polymer nanocomposites prepared with PP/HDPE blend and different surface modified nanokaolinite clay were analyzed. As the second stage of the work, the effect of simultaneous inclusion of nanokaolinite clay (both N100A and N100) and short glass fibres are investigated. The presence of nanofiller has increased the properties of hybrid composites to a greater extent than micro composites. As the last stage, micromechanical modeling of both nano and hybrid A composite is carried out to analyze the behavior of the composite under load bearing conditions. These theoretical analyses indicate that the polymer-nanoclay interfacial characteristics partially converge to a state of perfect interfacial bonding (Takayanagi model) with an iso-stress (Reuss IROM) response. In the case of hybrid composites the experimental data follows the trend of Halpin-Tsai model. This implies that matrix and filler experience varying amount of strain and interfacial adhesion between filler and matrix and also between the two fillers which play a vital role in determining the modulus of the hybrid composites.A significant observation from this study is that the requirement of higher fibre loading for efficient reinforcement of polymers can be substantially reduced by the presence of nanofiller together with much lower fibre content in the composite. Hybrid composites with both nanokaolinite clay and micron sized E-glass fibre as reinforcements in PP/HDPE matrix will generate a novel class of high performance, cost effective engineering material.

Le Retour du récit historique à l'ecole primaire: politiques educatives et pratiques courantes

Comment faire évoluer sa pratique professionnelle? Notre proposition s'intéresse à l'activité des professeurs des écoles confrontés à la volonté de l’institution (IO 2008) de renforcer la place du récit dans l'enseignement de l'histoire à l’école aux dépens de la pédagogie du « tout document » (IO 2002). De plus, excepté le lapidaire « par l’usage du récit », aucune précision supplémentaire n'est apportée quant aux modalités. Aussi modifier sa pratique professionnelle est-il problématique lorsque les textes officiels sont aussi peu explicites quant au fond et à la forme

Uso del test de cuantificación sensitiva para el estudio de la neuropatía de fibra pequeña

Introducción La mutación genética Val30Met de la proteína transtiretina (TTR) es causante de la polineuropatía amiloidótica familiar, comprometiendo en fases iniciales las fibras nerviosas pequeñas (mielinizadas Aδ y amielínicas tipo C), involucradas en funciones autonómicas, nocicepción, percepción térmica y sudoración. Los métodos neurofisiológicos convencionales, no logran detectar dichas anormalidades, retardando el inicio de tratamientos específicos para la enfermedad. Metodología El objetivo principal fue evaluar el test de cuantificación sensitiva (QST) como método de detección temprana de anormalidades de fibra pequeña, en individuos Val30Met, seguidos en el Hospital Universitario Santa María, Lisboa. Se clasificaron los pacientes en 3 grupos, según sintomatología y examen neurológico. Se analizaron los umbrales para percepción de frío, dolor con el calor y vibración en los grupos, en correlación con controles sanos. Resultados 18 registros de controles sanos y 33 de individuos con la mutación, divididos en asintomáticos (24,2%), sintomáticos con examen neurológico normal (42,4%) y sintomáticos con examen neurológico anormal (33,3%). No se encontraron diferencias entre los pacientes asintomáticos y los controles. Los umbrales para frío (p=0,042) y en el dolor intermedio con el calor (HP 5) (p=0,007) se encuentran elevados en individuos Val30Met sintomáticos con examen normal. En los pacientes sintomáticos con alteraciones al examen, también se presentaron alteraciones en el intervalo entre el inicio y el dolor intermedio con el calor (HP 5-0,5) (p=0,009). Discusión Los umbrales de frío y de percepción de dolor con el calor, permiten detectar anormalidades en personas con la mutación TTR Val30Met, sintomáticos, incluyendo aquellos sin cambios objetivos al examen neurológico.

Eficacia del diagnóstico prenatal no invasivo por células fetales libres en sangre materna 1990-2014. Revisión sistemática

ANTECEDENTES: El aislamiento de células fetales libres o ADN fetal en sangre materna abre una ventana de posibilidades diagnósticas no invasivas para patologías monogénicas y cromosómicas, además de permitir la identificación del sexo y del RH fetal. Actualmente existen múltiples estudios que evalúan la eficacia de estos métodos, mostrando resultados costo-efectivos y de menor riesgo que el estándar de oro. Este trabajo describe la evidencia encontrada acerca del diagnóstico prenatal no invasivo luego de realizar una revisión sistemática de la literatura. OBJETIVOS: El objetivo de este estudio fue reunir la evidencia que cumpla con los criterios de búsqueda, en el tema del diagnóstico fetal no invasivo por células fetales libres en sangre materna para determinar su utilidad diagnóstica.  MÉTODOS: Se realizó una revisión sistemática de la literatura con el fin de determinar si el diagnóstico prenatal no invasivo por células fetales libres en sangre materna es efectivo como método de diagnóstico.  RESULTADOS: Se encontraron 5,893 artículos que cumplían con los criterios de búsqueda; 67 cumplieron los criterios de inclusión: 49.3% (33/67) correspondieron a estudios de corte transversal, 38,8% (26/67) a estudios de cohortes y el 11.9% (8/67) a estudios casos y controles. Se obtuvieron resultados de sensibilidad, especificidad y tipo de prueba. CONCLUSIÓN: En la presente revisión sistemática, se evidencia como el diagnóstico prenatal no invasivo es una técnica feasible, reproducible y sensible para el diagnóstico fetal, evitando el riesgo de un diagnóstico invasivo.

Uveítis pediática no infecciosa, una experiencia de una cohorte colombiana

Resumen: •Antecedentes: La uveítis pediátrica no infecciosa tiene el potencial de desencadenar severas complicaciones visuales y su manejo farmacológico convencional está asociado a importantes efectos secundarios. 1 Infliximab (INF) y Adalimumab (ADA), son dos medicamentos biológicos disponibles para el manejo de la uveítis pediátrica refractaria. Se unen específicamente al TNFα y previenen la unión del mismo con los receptores celulares; interacción directamente implicada en el proceso inflamatorio y el subsecuente daño tisular. 2,3 •Métodos: Se realizó estudio de tipo cohorte retrospectiva mediante revisión de historias clínicas de 35 pacientes pediátricos diagnosticados con uveítis durante los años 2009-2015. Se comparó control de la inflamación ocular, tiempo de respuesta y eventos adversos en pacientes tratados con ADA o INF con dosis bajas de Metotrexate vs. Metotrexate (MTX) como única terapia. •Resultados: El 45.7% de la población estudiada correspondía al sexo femenino, cuya edad promedio de inicio de síntomas y de diagnósticos fue de 9 años. El 80% de los casos fueron uveítis idiopáticas, seguido por Vogt-Koyanagi-Harada (8,5%) y AIJ (5,7%). El 91,4% presentó compromiso ocular bilateral y se documentaron 2 casos de ambliopía. El 12,9% de los pacientes que recibieron MTX como tratamiento de primera línea requirieron escalonamiento terapéutico por presentar eventos adversos (Elevación de enzimas hepáticas e intolerancia gastrointestinal (GI)). El tiempo promedio para alcanzar control de la inflamación con MTX fue 9 semanas, y para Adalimumab fue de 8,75 semanas (P: 0,90). Se comparó la capacidad de controlar la inflamación del MTX vs Anti-TNF, y no se observaron diferencias significativas (P: 0.88).

Efectividad del tratamiento inmunomodulador con leucocitos alogénicos, en aborto involuntario recurrente. Revisión sistemática y metaanálisis

Dentro del marco del aborto involuntario recurrente (AIR), se han propuesto causas autoinmunes y alogénicas, e implementación de terapias como la inmunización activa con leucocitos alogénicos de la pareja o de donantes. La evidencia disponible en cuanto a la efectividad de estos tratamientos es contradictoria, por lo que se desea realizar una revisión sistemática para evaluar la efectividad de la inmunización activa con leucocitos alogénicos de la pareja o de donantes para esta condición. Se realizó un estudio tipo revisión sistemática de la literatura, usando las siguientes bases de datos: Medline, Embase, Cochrane Library y Scielo. Se realizó una búsqueda a través del registro de ensayos clínicos del Instituto Nacional de Salud de los Estados Unidos (www.clinicaltrials.gov) y, una búsqueda manual a través de las referencias de los estudios seleccionados siguiendo la estrategia de bola de nieve. Se seleccionaron ensayos clínicos y estudios de cohorte analítica, en idioma inglés y español. Se realizó un análisis cuantitativo de la información por medio de un metaanálisis. El tratamiento inmunomodulador con linfocitos puede considerarse como una terapia efectiva para mantener la gestación y lograr recién nacido vivo según resultados estadísticos; sin embargo la calidad de los estudios incluidos es baja, por lo que no se aconseja para la práctica rutinaria. Se sugiere la realización de estudios con metodologías robustas y que apoyen los resultados presentados en esta investigación.

El fenómeno de los refugiados ambientales en Haití y su repercusión en la seguridad regional (2010-2015)

Esta monografía busca analizar cómo el fenómeno de los refugiados ambientales que se generó a partir del terremoto en Haití de 2010, ha influido sobre el complejo de seguridad en la región de el Caribe, desde el 2010 hasta el 2015, teniendo en cuenta la crisis social provocada por el desastre ambiental, ya que en razón de la carencia de estatus legal y de amenazas interdependientes y multidimensionales obligó a los Estados del área a modificar sus políticas de seguridad, mediante la interacción de los países, puesto que se presentaron diferentes cambios en las relaciones del complejo de seguridad, lo cual determino nuevas transformaciones en la securitización de la región. Esta monografía recurrirá a la teoría de Complejos de Seguridad Regional de autores como: Barry Buzan, Ole Waever, Derrick Frazier y Robert Stewart.

Evidence for complex multigenic inheritance of radiation AML susceptibility in mice revealed using a surrogate phenotypic assay

The mapping of genes which affect individual cancer risk is an important but complex challenge. A surrogate assay of susceptibility to radiation-induced acute myeloid leukaemia (AML) in the mouse based on chromosomal radiosensitivity has been developed and validated. This assay was applied to the mapping of radiation-induced AML risk modifier loci by association with microsatellite markers. A region on chromosome (chr) 18 with strong association is identified and confirmed by backcross analysis. Additional loci on chrs 8 and 13 show significant association. A key candidate gene Rbbp8 on chr18 is identified. Rbbp8 is shown to be upregulated in response to X-irradiation in the AML sensitive CBA strain but not AML resistant C57BL/6 strain. This study demonstrates the strength of utilizing surrogate endpoints of cancer susceptibility in the mapping of mouse loci and identifies additional loci that may affect radiation cancer risk.

Unexpectedly superior enantioselectivity for trans-stilbene cis-dihydroxylation over anchored triosmium carbonyl species in confined Al-MCM-41 channels

Superior enantioselectivity in the dihydroxylation of trans-stilbene catalysed by anchored triosmium carbonyl species without using a chiral modifier is observed inside sterically congested MCM-41 channels; this effect is more pronounced through the introduction of surface Al sites into the silicate.

Interaction of 6,6′′-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-2,2′:6′,2′′-terpyridine (CyMe4-BTTP) with some trivalent ions such as lanthanide(iii) ions and americium(iii)

The new ligand 6,6 ''-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)2,2':6 ',2 ''-terpyridine (CyMe4-BTTP) has been synthesized in 4 steps from 2,2':6',2 ''-terpyridine. Detailed NMR and mass spectrometry studies indicate that the ligand forms 1 : 2 complexes with lanthanide(III) perchlorates where the aliphatic rings are conformationally constrained whereas 1 : 1 complexes are formed with lanthanide(III) nitrates where the rings are conformationally mobile. An optimized structure of the 1 : 2 solution complex with Yb(III) was obtained from the relative magnitude of the induced paramagnetic shifts. X-Ray crystallographic structures of the ligand and of its 1 : 1 complex with Y(III) were also obtained. The NMR and mass spectra of [Pd(CyMe4-BTTP)](n)(2n+) are consistent with a dinuclear double helical structure (n = 2). In the absence of a phase-modifier, CyMe4-BTTP in n-octanol showed a maximum distribution coefficient of Am(III) of 0.039 (+/-20%) and a maximum separation factor of Am(III) over Eu(III) of 12.0 from nitric acid. The metal(III) cations are extracted as the 1 : 1 complex from nitric acid. The generally low distribution coefficients observed compared with the BTBPs arise because the 1 : 1 complex of CyMe4-BTTP is considerably less hydrophobic than the 1 : 2 complexes formed by the BTBPs. In M(BTTP)(3+) complexes, there is a competition between the nitrate ions and the ligand for the complexation of the metal.

Molecular targets underlying SUMO-mediated neuroprotection in brain ischemia

SUMOylation (small ubiquitin-like modifier conjugation) is an important post-translational modification which is becoming increasingly implicated in the altered protein dynamics associated with brain ischemia. The function of SUMOylation in cells undergoing ischemic stress and the identity of small ubiquitin-like modifier (SUMO) targets remain in most cases unknown. However, the emerging consensus is that SUMOylation of certain proteins might be part of an endogenous neuroprotective response. This review brings together the current understanding of the underlying mechanisms and downstream effects of SUMOylation in brain ischemia, including processes such as autophagy, mitophagy and oxidative stress. We focus on recent advances and controversies regarding key central nervous system proteins, including those associated with the nucleus, cytoplasm and plasma membrane, such as glucose transporters (GLUT1, GLUT4), excitatory amino acid transporter 2 glutamate transporters, K+ channels (K2P1, Kv1.5, Kv2.1), GluK2 kainate receptors, mGluR8 glutamate receptors and CB1 cannabinoid receptors, which are reported to be SUMO-modified. A discussion of the roles of these molecular targets for SUMOylation could play following an ischemic event, particularly with respect to their potential neuroprotective impact in brain ischemia, is proposed.

Surface chemistry of alanine on Cu{111}: Adsorption geometry and temperature dependence

Adsorption of l-alanine on the Cu{111} single crystal surface was investigated as a model system for interactions between small chiral modifier molecules and close-packed metal surfaces. Synchrotron-based X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy are used to determine the chemical state, bond coordination and out-of-plane orientation of the molecule on the surface. Alanine adsorbs in its anionic form at room temperature, whilst at low temperature the overlayer consists of anionic and zwitterionic molecules. NEXAFS spectra exhibit a strong angular dependence of the π ⁎ resonance associated with the carboxylate group, which allows determining the tilt angle of this group with respect to the surface plane (48° ± 2°) at room temperature. Low-energy electron diffraction (LEED) shows a p(2√13x2√13)R13° superstructure with only one domain, which breaks the mirror symmetry of the substrate and, thus, induces global chirality to the surface. Temperature-programmed XPS (TP-XPS) and temperature-programmed desorption (TPD) experiments indicate that the zwitterionic form converts into the anionic species (alaninate) at 293 K. The latter desorbs/decomposes between 435 K and 445 K.