Postharvest physiology and volatile production by flowers of Ptilotus nobilis

Ptilotus nobilis (Lindl.) F. Muell. has potential in the floriculture industries as a cut flower crop. Ethylene production and respiration rates, fresh weight changes and volatile scent production from cut inflorescences of P. nobilis cultivars Passion (dark pink flowers) and Purity (white-green flowers) were measured during vase life. Inflorescence weight loss was significant (P<0.001) during vase life with wilting and colour loss being the primary reasons for loss of vase life. Inflorescences ready for the cut market stored and at 22 degrees C had vase lives of >12 d. Ethylene production by inflorescences was low to negligible. Treatment with silverthiosulphate (STS) and ethylene had no effects on vase life. Evidently, ethylene did not play a role in determining the postharvest longevity of cut P. nobilis flowers. Respiration rates of inflorescences were high at harvest (>700 mg CO2 kg(-1) FW h(-1)) and declined gradually there-after during vase life. Total volatile emissions followed a similar pattern. For Passion, respiration rates of immature florets were significantly greater (P=0.02) than florets from other developmental stages while the calyx produced the most CO2. For Purity, respiration rates of florets of different maturities did not differ and the reproductive tissue produced the most CO2. Only fully opened mature florets with their stigma and anthers revealed, emitted significant quantities of volatiles (P<0.001) and primarily from the calyx tissue for both cultivars. The individual volatiles differed somewhat for the two cultivars. However, both produced significant quantities of benzaldehyde, 3,5-dimethoxytoluene and benzyl alcohol. These. compounds have previously been associated with desirable floral scent. (C) 2013 Elsevier B.V. All rights reserved.

Uusmaalaisten viljelijöiden arviot uudesta ympäristötuesta

The agro-environmental subsidy scheme is the most important agricultural environmental policy instrument used in Finland. The principal aim of the agro-environmental subsidy is to reimburse farmer the costs of using environmentally sounder farming practices and the measures that aim for preserving the environment. It also serves as an economic incentive for ensuring the large enough participation. The agro-environmental subsidy scheme is to be reformed in 2007. The main question answered in thesis was that whether farmers in Uusimaa region are ready to participate in the environmental subsidy scheme on the basis of the economical reasons or not. The focus is on farmers' opinions about how difficult it is to carry out measures of new environmental subsidy and do these measures change their ways of farming. The analysis is based on an empirical study of the farmers attitudes towards the new environmental subsidy scheme. The theoretical framework of this thesis is based on principal-agent theory and on the theory of the firm. In principal-agent theory environmental subsidy is interpreted as a deal in which farmers function as agents and government as a principal. Theory of the firm provides a theoretical framework for the analysis, through which we aim to analyse how rationally behaving farmer makes decisions by economical reasons to participate in the environment subsidy scheme. The thesis points out that presumably the participation percentage will stay high during the period of the new environmental subsidy scheme.

Thermal stresses around circular holes in spherical shells

The thermal stress problem of a circular hole in a spherical shell of uniform thickness is solved by using a continuum approach. The influence of the hole is assumed to be confined to a small region around the opening. The thermal stress problem is converted as usual to an equivalent boundary value problem with forces specified around the cutout. The stresses and displacement are obtained for a linear variation of temperature across the thickness of the shell and presented in graphical form for ready use.

How your shopping choices will help Coles and Woolworths take on the banks

The days when Coles and Woolworths only sold groceries are long gone. Both are now established players in a broad range of consumer markets, with interests in liquor and hotels, fuel and convenience, general merchandise and mobile phones. With a network of over 1,600 supermarkets, 1,100 service stations, 2,200 liquor stores and nearly 400 hotels, the supermarket duo are now getting ready for a war with Australia’s big four banks.

Determination of integral fringe order in photoelasticity

The paper describes a method to determine the integral fringe order associated with a fractional fringe value that is measured using Tardy or other similar compensators. The method makes use of two different wavelengths of light to determine the fractional fringe values. Further, it does not assume the independence of the material fringe constant on the wavelength of light used. From these measured fractional fringe values, the associated integral fringe order is determined. A method to construct a ready-reckoner table is also described which helps to identify the integral fringe order from any two measured fractional fringe values.

Plantation crops

Plantation horticulture is an important part of the economic landscape of many tropical countries. Plantations were developed in association with colonial expansion and the original models were based on the production of monocrops which had a ready export market, using cheap or slave labour. Plantations in the twenty first Century are less likely environments for exploitation of human and environmental capital. They are however, linked to crop production on a large scale for produce to be sold, at profit, for export to distant markets rather than local sale. A range of crops can be broadly categorized into plantation crops. Plantations continue to be effective models for efficient agricultural production and will evolve in response to the continued demand for food, fruit, fibre, oil crops and timber from a growing population

Postharvest physiology and volatile production by flowers of Ptilotus nobilis

Ptilotus nobilis (Lindl.) F. Muell. has potential in the floriculture industries as a cut flower crop. Ethylene production and respiration rates, fresh weight changes and volatile scent production from cut inflorescences of P. nobilis cultivars Passion (dark pink flowers) and Purity (white-green flowers) were measured during vase life. Inflorescence weight loss was significant (P < 0.001) during vase life with wilting and colour loss being the primary reasons for loss of vase life. Inflorescences ready for the cut market stored and at 22 °C had vase lives of >12 d. Ethylene production by inflorescences was low to negligible. Treatment with silverthiosulphate (STS) and ethylene had no effects on vase life. Evidently, ethylene did not play a role in determining the postharvest longevity of cut P. nobilis flowers. Respiration rates of inflorescences were high at harvest (>700 mg CO2 kg−1 FW h−1) and declined gradually thereafter during vase life. Total volatile emissions followed a similar pattern. For Passion, respiration rates of immature florets were significantly greater (P = 0.02) than florets from other developmental stages while the calyx produced the most CO2. For Purity, respiration rates of florets of different maturities did not differ and the reproductive tissue produced the most CO2. Only fully opened mature florets with their stigma and anthers revealed, emitted significant quantities of volatiles (P < 0.001) and primarily from the calyx tissue for both cultivars. The individual volatiles differed somewhat for the two cultivars. However, both produced significant quantities of benzaldehyde, 3,5-dimethoxytoluene and benzyl alcohol. These compounds have previously been associated with desirable floral scent.

Postharvest physiology and volatile production by flowers of Ptilotus nobilis

Ptilotus nobilis (Lindl.) F. Muell. has potential in the floriculture industries as a cut flower crop. Ethylene production and respiration rates, fresh weight changes and volatile scent production from cut inflorescences of P. nobilis cultivars Passion (dark pink flowers) and Purity (white-green flowers) were measured during vase life. Inflorescence weight loss was significant (P < 0.001) during vase life with wilting and colour loss being the primary reasons for loss of vase life. Inflorescences ready for the cut market stored and at 22 °C had vase lives of >12 d. Ethylene production by inflorescences was low to negligible. Treatment with silverthiosulphate (STS) and ethylene had no effects on vase life. Evidently, ethylene did not play a role in determining the postharvest longevity of cut P. nobilis flowers. Respiration rates of inflorescences were high at harvest (>700 mg CO2 kg−1 FW h−1) and declined gradually thereafter during vase life. Total volatile emissions followed a similar pattern. For Passion, respiration rates of immature florets were significantly greater (P = 0.02) than florets from other developmental stages while the calyx produced the most CO2. For Purity, respiration rates of florets of different maturities did not differ and the reproductive tissue produced the most CO2. Only fully opened mature florets with their stigma and anthers revealed, emitted significant quantities of volatiles (P < 0.001) and primarily from the calyx tissue for both cultivars. The individual volatiles differed somewhat for the two cultivars. However, both produced significant quantities of benzaldehyde, 3,5-dimethoxytoluene and benzyl alcohol. These compounds have previously been associated with desirable floral scent.

Characteristics of Proportional Weirs

A theorem termed the Geometrical Continuity Theorem is enunciated and proven. This theorem throws light on the aspects of the continuity of the proportional portion with the base weir portion. These two portions constitute the profile of a proportional weir. A weir of this type with circular bottom is designed. The theorem is used to establish the continuity at the junction of the proportional and the base weir portions of this weir. The coordinates of the weir profile are obtained by numerical methods and are furnished in tabular form for ready use by designers. The discharge passing through the weir is a linear function of the head. The verification of the assumed linear discharge-head relation is furnished for one of the three weirs with which experiments were conducted. The coefficient of discharge for this typical weir is found to be a constant with a value of 0.59.

Naiset ja naisten puheet kirkolliskokouksen naispappeuskeskusteluissa vuosina 1974-1987

Women and women s words in discussions about the ordination of women in the General Synod between 1974 and 1987. In 1986, the General Synod of the Evangelical Lutheran Church in Finland approved the ordination of women. Prior to that decision, a considerable amount of discussion and debate took place about this renewal in both the Synod and the general public. The different points of view had divided the church and the people, and had placed the church under pressure to resolve the issue as soon as possible. At the same time, the changing climate in people s attitudes toward the church and the changing position of women in society clearly weighed in on this matter. The research material consists of the speeches about the ordination of women given by the women representatives in the General Synod of the Evangelical Lutheran Church in Finland between the years 1974 and 1987. The aim is to determine why these representatives wanted to ordain women as pastors, what kind of women pastors they wanted to have in the congregations, and what they wanted to change in the church through this renewal. The basic methods of the analysis include discourse analysis as well as the new rhetorics and some concepts used by Pierre Bourdieu. A framework, which I named rhetoric patterning, was developed to interpret the results. This framework has facilitated the identification of three effective discourses in the studied argumentation: the folk church discourse, the pastor image discourse and the church image discourse. According to the opinions of the women representatives, the concept of change turned out to be a very decisive factor as the church sought a way to reach its members. To maintain a good and modern image seemed very important for the church to be able to perform its task in the modern era. The women representatives presented the situation of the church in terms of contextual theology and took seriously the membership of all those baptized into the church. They were therefore ready to take into account the opinion of all church members. The problem was that even though the ordination of women was established, the fixed mental schemes of the people and the strong power structures of the church remained untouched. Women were allowed into a new area of church life, but with certain publicly pronounced and unconsciously recognized conditions. Did this change really mean greater equality between women and men, as was intended? Key words: ordination of women, General Synod, contextualization, discourse analysis.

The Systems Theory Framework of career development: Applications to career counselling and career assessment

Since its inception, the Systems Theory Framework of career development has afforded ready translation into practice, especially into career counselling and qualitative career assessment. Through its clearly articulated constructs and the clarity of its diagrammatic representation, the Systems Theory Framework has facilitated the development of qualitative career assessment instruments as well as a quantitative measure. This article briefly overviews these practical applications of the Systems Theory Framework as well as its application in career counselling through a story telling approach. The article concludes by offering a synthesis of and considering future directions for the Systems Theory Framework’s practical applications.

The present attitude of African youth towards entrepreneurship

It is widely known that entrepreneurship plays a crucial role within the economy. As the African economy needs rapid development and growth, this paper investigates the present attitude of African youth towards new business creation and entrepreneurship. Both quantitative and qualitative research methods were used, and 204 people participated in the study. The participants were accessed via social media such as Facebook (pages and groups), LinkedIn (groups), Twitter, and WhatsApp. The results reveal that African youth have positive attitudes and that they are entrepreneurially active and ready to take risks, provided that they can be self-dependent. Similarly, the results show that entrepreneurship education is much needed to improve innovative start-ups in Africa.

System integration design in MEMS - A case study of micromachined load cell

One of the critical issues in large scale commercial exploitation of MEMS technology is its system integration. In MEMS, a system design approach requires integration of varied and disparate subsystems with one of a kind interface. The physical scales as well as the magnitude of signals of various subsystems vary widely. Known and proven integration techniques often lead to considerable loss in advantages the tiny MEMS sensors have to offer. Therefore, it becomes imperative to think of the entire system at the outset, at least in terms of the concept design. Such design entails various aspects of the system ranging from selection of material, transduction mechanism, structural configuration, interface electronics, and packaging. One way of handling this problem is the system-in-package approach that uses optimized technology for each function using the concurrent hybrid engineering approach. The main strength of this design approach is the fast time to prototype development. In the present work, we pursue this approach for a MEMS load cell to complete the process of system integration for high capacity load sensing. The system includes; a micromachined sensing gauge, interface electronics and a packaging module representing a system-in-package ready for end characterization. The various subsystems are presented in a modular stacked form using hybrid technologies. The micromachined sensing subsystem works on principles of piezo-resistive sensing and is fabricated using CMOS compatible processes. The structural configuration of the sensing layer is designed to reduce the offset, temperature drift, and residual stress effects of the piezo-resistive sensor. ANSYS simulations are carried out to study the effect of substrate coupling on sensor structure and its sensitivity. The load cell system has built-in electronics for signal conditioning, processing, and communication, taking into consideration the issues associated with resolution of minimum detectable signal. The packaged system represents a compact and low cost solution for high capacity load sensing in the category of compressive type load sensor.

Biotechnology in the development of improved phytases

Phytase enzyme supplements are now ubiquitous in the commercial production of a range of livestock, particularly chickens and pigs. Significant effort has been directed over the last two decades towards producing improved enzymes with higher activity, increased stability and at economic levels in industrial fermentations. As such, there are excellent products on the market, but there is a continuing demand for further improvements to drive down costs and for enzyme manufacturers to increase market share. The rapid development of DNA sequencing and gene synthesis technologies has provided ready access to a large number of new and uncharacterised potential phytases. Challenges remain however in identifying and developing those with improved properties.

γ-Y2Si2O7, a machinable silicate ceramic: Mechanical properties and machinability

In this paper, the mechanical properties of bulk single-phase γ-Y2Si2O7 ceramic are reported. γ-Y2Si2O7 exhibits low shear modulus, excellent damage tolerance, and thus has a good machinability ready for metal working tools. To understand the underlying mechanism of machinability, drilling test, Hertzian contact test, and density functional theory (DFT) calculation are employed. Hertzian contact test demonstrates that γ-Y2Si2O7 is a "quasi-plastic" ceramic and the intrinsically weak interfaces contribute to its machinability. Crystal structure characteristics and DFT calculations of γ-Y2Si2O7 suggest that some weakly bonded planes, which involve Y-O bonds that can be easily broken, are the sources of the low shear deformation resistance and good machinability.