Bringing engineering education to life – an empirical approach to learning and teaching

Learning and teaching approaches to engineering are generally perceived to be difficult and academically challenging. Such challenges are reflected in high levels of student attrition and failure. In addressing this issue, a unique approach to engineering education has been developed by the paper authors. This approach, which is suitable for undergraduate and postgraduate levels, brings together pedagogic and engineering epistemologies in an empirically grounded framework. It is underpinned by three distinctive concepts: Relationships, Variety & Synergy. Based upon research, the R + V + S approach to Engineering Education provides a learning and teaching strategy, which in enhancing the student experience, increases retention and positively impacts student success [S2]. Based on the study findings, this paper shows how, by designing engineering education around the concepts of Relationships, Variety and Synergy, the student learning experience becomes one that is academically challenging yet beneficial to both students and engineering educators. The challenge is to widen and test the approach in other areas of engineering education, before going on to investigate the value of the approach in other disciplines.

The influence of study and travel abroad on the personal and professional development of students in architecture design programs

International travel has significant implications on the study of architecture. This study analyzed ways in which undergraduate and graduate students benefited from the experience of international travel and study abroad. Taken from the perspective of 15 individuals who were currently or had been architecture students at the University of Miami and Florida International University or who were alumni of the University of Florida and Syracuse University, the research explored how international travel and study abroad enhanced their awareness and understanding of architecture, and how it complemented their architecture curricula. This study also addressed a more personal aspect of international travel in order to learn how the experience and exposure to foreign cultures had positively influenced the personal and professional development of the participants.^ Participants’ individual and two-person semi-structured interviews about study abroad experiences were electronically recorded and transcribed for analysis. A second interview was conducted with five of the participants to obtain feedback concerning the accuracy of the transcripts and the interpretation of the data. Sketch journals and design projects were also analyzed from five participants and used as data for the purposes of better understanding what these individuals learned and experienced as part of their study abroad.^ Findings indicated that study abroad experiences helped to broaden student understanding about architecture and urban development. These experiences also opened the possibilities of creative and professional expression. For many, this was the most important aspect of their education as architects because it heightened their interest in architecture. These individuals talked about how they had the opportunity to experience contemporary and ancient buildings that they had learned about in their history and design classes on their home campuses. In terms of personal and professional development, many of the participants remarked that they became more independent and self-reliant because of their study abroad experiences. They also displayed a sense of global awareness and were interested in the cultures of their host nations. The study abroad experiences also had a lasting influence on their professional development.^

Nanoindentation Relaxation Study and Micromechanics of Cement-Based Materials

Ce travail évalue le comportement mécanique des matériaux cimentaires à différentes échelles de distance. Premièrement, les propriétés mécaniques du béton produit avec un bioplastifiant à base de microorganismes efficaces (EM) sont etudiées par nanoindentation statistique, et comparées aux propriétés mécaniques du béton produit avec un superplastifiant ordinaire (SP). Il est trouvé que l’ajout de bioplastifiant à base de produit EM améliore la résistance des C–S–H en augmentant la cohésion et la friction des nanograins solides. L’analyse statistique des résultats d’indentation suggère que le bioplastifiant à base de produit EM inhibe la précipitation des C–S–H avec une plus grande fraction volumique solide. Deuxièmement, un modèle multi-échelles à base micromécanique est dérivé pour le comportement poroélastique de la pâte de ciment au jeune age. L’approche proposée permet d’obtenir les propriétés poroélastiques requises pour la modélisation du comportoment mécanique partiellement saturé des pâtes de ciment viellissantes. Il est montré que ce modèle prédit le seuil de percolation et le module de Young non drainé de façon conforme aux données expérimentales. Un metamodèle stochastique est construit sur la base du chaos polynomial pour propager l’incertitude des paramètres du modèle à travers plusieurs échelles de distance. Une analyse de sensibilité est conduite par post-traitement du metamodèle pour des pâtes de ciment avec ratios d’eau sur ciment entre 0.35 et 0.70. Il est trouvé que l’incertitude sous-jacente des propriétés poroélastiques équivalentes est principalement due à l’énergie d’activation des aluminates de calcium au jeune age et, plus tard, au module élastique des silicates de calcium hydratés de basse densité.

The Use of a Computer-Based Simulation Game (CSG) for Learning and Teaching

Introduction A computer-based simulation game (CSG) was used for the first time in a final-year undergraduate module. A change management simulation game was used in the seminar classes as a formative exercise that was linked to parts of the students’ summative assessment. The module evaluation suggests that most students learned from using the CSG.

Competencies Required in Education Research and Teaching Systematization according to Students from the Preschool, Primary and Secondary Education Programs of the University of Costa Rica

The purpose of this paper is to present the results of two online forums carried out with the participation of 42 students of the Licenciaturas  in Preschool Education, Primary Education and Secondary Education of the University of Costa Rica. The main purpose of the forums was to determine the insights of the participant students about the competencies they have achieved in the field of education research, and which have been the essential tools for them to systematize their own teaching practices. The discussion forums were part of the course FD5091 Métodos de Investigación Educativa [Education Research Methods] of the School of Teacher Education, delivered from March-April 2010.  Of the sample, 60 percent were students of the Preschool teaching program, 35 percent were from the Primary Education teaching program and 5 percent were from the Secondary Education teaching program in the fields of Science, Mathematics and Social Studies. According to the insights and beliefs showed by the participants –both, the future teachers and the profession practitioners–, there are no opportunities for research or systematization of their own teaching mediation, in the current work situation.(1) Translator’s Note: In Costa Rica, the “Licenciatura” is a one-year post-Bachelor study program, usually including thesis. “Primary Education” refers to students from the 1st to 6th grades, and “Secondary Education” refers to students from the 7th to 11th grades.

Practical assessment on the run – iPads as an effective mobile and paperless tool in physical education and teaching

This paper investigates the use of iPads in the assessment of predominantly second year Bachelor of Education (Primary/Early Childhood) pre-service teachers undertaking a physical education and health unit. Within this unit, practical assessment tasks are graded by tutors in a variety of indoor and outdoor settings. The main barriers for the lecturer or tutor for effective assessment in these contexts include limited time to assess and the provision of explicit feedback for large numbers of students, complex assessment procedures, overwhelming record-keeping and assessing students without distracting from the performance being presented. The purpose of this pilot study was to investigate whether incorporating mobile technologies such as iPads to access online rubrics within the Blackboard environment would enhance and simplify the assessment process. Results from the findings indicate that using iPads to access online rubrics was successful in streamlining the assessment process because it provided pre-service teachers with immediate and explicit feedback. In addition, tutors experienced a reduction in the amount of time required for the same workload by allowing quicker forms of feedback via the iPad dictation function. These outcomes have future implications and potential for mobile paperless assessment in other disciplines such as health, environmental science and engineering.

Problems in physics and mathematics contexts with middle and high school classes: vertical and horizontal comparison

My thesis falls within the framework of physics education and teaching of mathematics. The objective of this report was made possible by using geometrical (in mathematics) and qualitative (in physics) problems. We have prepared four (resp. three) open answer exercises for mathematics (resp. physics). The test batch has been selected across two different school phases: end of the middle school (third year, 8\textsuperscript{th} grade) and beginning of high school (second and third year, 10\textsuperscript{th} and 11\textsuperscript{th} grades respectively). High school students achieved the best results in almost every problem, but 10\textsuperscript{th} grade students got the best overall results. Moreover, a clear tendency to not even try qualitative problems resolution has emerged from the first collection of graphs, regardless of subject and grade. In order to improve students' problem-solving skills, it is worth to invest on vertical learning and spiral curricula. It would make sense to establish a stronger and clearer connection between physics and mathematical knowledge through an interdisciplinary approach.

3-Nitrophenol-4,4 '-bipyridyl N,N '-dioxide (2/1): a DFT study and CSD analysis of DPNO molecular complexes

The title 2:1 complex of 3-nitrophenol (MNP) and 4,4'-bipyridyl N, N'-dioxide (DPNO), 2C(6)H(5)NO(3)center dot C(10)H(8)N(2)O(2) or 2MNP center dot DPNO, crystallizes as a centrosymmetric three-component adduct with a dihedral angle of 59.40 (8)degrees between the planes of the benzene rings of MNP and DPNO (the DPNO moiety lies across a crystallographic inversion centre located at the mid-point of the C-C bond linking its aromatic rings). The complex owes its formation to O-H center dot center dot center dot O hydrogen bonds [O center dot center dot center dot O = 2.605 (3) angstrom]. Molecules are linked by intermolecular C-H center dot center dot center dot O and C-H center dot center dot center dot N interactions forming R(2)(1) (6) and R(2)(2) (10) rings, and R(6)(6) (34) and R(4)(4) (26) macro-rings, all of which are aligned along the [(1) over bar 01] direction, and R(2)(2) (10) and R(2)(1) (7) rings aligned along the [010] direction. The combination of chains of rings along the [(1) over bar 01] and [010] directions generates the three-dimensional structure. A total of 27 systems containing the DNPO molecule and forming molecular complexes of an organic nature were analysed and compared with the structural characteristics of the dioxide reported here. The N-O distance [1.325 (2) angstrom] depends not only on the interactions involving the O atom at the N-O group, but also on the structural ordering and additional three-dimensional interactions in the crystal structure. A density functional theory (DFT) optimized structure at the B3LYP/6-311G(d,p) level is compared with the molecular structure in the solid state.

Treatment of Aqueous Effluents Containing Phenol by the O(3), O(3)-UV, and O(3)-H(2)O(2) Processes: Experimental Study and Neural Network Modeling

In this work, the oxidation of the model pollutant phenol has been studied by means of the O(3), O(3)-UV, and O(3)-H(2)O(2) processes. Experiments were carried out in a fed-batch system to investigate the effects of initial dissolved organic carbon concentration, initial, ozone concentration in the gas phase, the presence or absence of UVC radiation, and initial hydrogen peroxide concentration. Experimental results were used in the modeling of the degradation processes by neural networks in order to simulate DOC-time profiles and evaluate the relative importance of process variables.

Assessing cost-effectiveness - Mental health: introduction to the study and methods

Objective: The Assessing Cost-Effectiveness - Mental Health (ACE-MH) study aims to assess from a health sector perspective, whether there are options for change that could improve the effectiveness and efficiency of Australia's current mental health services by directing available resources toward 'best practice' cost-effective services. Method: The use of standardized evaluation methods addresses the reservations expressed by many economists about the simplistic use of League Tables based on economic studies confounded by differences in methods, context and setting. The cost-effectiveness ratio for each intervention is calculated using economic and epidemiological data. This includes systematic reviews and randomised controlled trials for efficacy, the Australian Surveys of Mental Health and Wellbeing for current practice and a combination of trials and longitudinal studies for adherence. The cost-effectiveness ratios are presented as cost (A$) per disability-adjusted life year (DALY) saved with a 95% uncertainty interval based on Monte Carlo simulation modelling. An assessment of interventions on 'second filter' criteria ('equity', 'strength of evidence', 'feasibility' and 'acceptability to stakeholders') allows broader concepts of 'benefit' to be taken into account, as well as factors that might influence policy judgements in addition to cost-effectiveness ratios. Conclusions: The main limitation of the study is in the translation of the effect size from trials into a change in the DALY disability weight, which required the use of newly developed methods. While comparisons within disorders are valid, comparisons across disorders should be made with caution. A series of articles is planned to present the results.