Morfologia das fibras musculares esqueléticas de frangos de corte de diferentes linhagens criados em sistemas de confinamento e semiconfinamento

Avaliou-se o efeito da linhagem, do sistema de criação e do sexo sobre o peso vivo, o rendimento de carcaça e de pernas e os aspectos morfológicos das fibras musculares esqueléticas do músculo flexor longo do hálux de frangos de corte. O delineamento experimental foi inteiramente casualizado, em esquema fatorial 4 x 2 x 2, ou seja, quatro linhagens (Ross-308, Pescoço Pelado Label Rouge, Caipirinha e Paraíso Pedrês), dois sistemas de criação (confinamento e semiconfinamento) e dois sexos, com duas repetições por tratamento, sendo que cada ave retirada ao acaso aos 56 dias de idade foi considerada uma unidade experimental, totalizando 64 aves. A linhagem Ross apresentou maior peso vivo e maiores pesos de carcaça, de pernas, de carne de penas e do músculo flexor longo do hálux e maiores rendimentos de carcaça e de carnes de pernas que as outras linhagens. A maior massa muscular das aves selecionadas para alta taxa de crescimento está relacionada ao aumento na área dos três tipos de fibras musculares (SO, FOG e FG). Machos apresentaram maior massa muscular e musculatura mais glicolítica que fêmeas. O sistema de semiconfinamento alterou a composição de fibras musculares esqueléticas dos machos, tornando-a mais oxidativa, porém, esse efeito não foi observado nas fêmeas.

Avaliação do desempenho e de parâmetros gastrintestinais de frangos de corte alimentados com dietas formuladas com sorgo alto tanino e baixo tanino

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização físico-química da mucilagem de inhame liofilizada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Carne de avestruz: rendimento de carcaça e aspectos físicos e químicos

O objetivo deste estudo foi avaliar o rendimento de carcaça e os aspectos físicos e químicos da carne de avestruzes abatidos comercialmente no Brasil. E para isso acompanhou-se o processo de abate e desossa de um abatedouro comercial de avestruzes. Utilizou-se 12 machos e 12 fêmeas, com idade entre 13 e 15 meses, da subespécie African Black. No momento da desossa foram avaliados: o pH, a temperatura e a coloração dos músculos. A composição química e mineral foi determinada segundo metodologias propostas pela AOAC. O pH apresenta diferença significativa em relação aos diferentes músculos. Ao avaliar a coloração dos músculos em relação ao sexo, observou-se que a luminosidade foi maior para os machos, contribuindo significativamente para que a carne fosse mais brilhante que a das fêmeas. Houve diferença significativa em relação ao sexo sobre os teores de proteína bruta e lipídios. O teor de minerais não apresentou diferença significativa em relação ao sexo. Porém, observa-se diferença significativa entre os diferentes músculos avaliados. Conclui-se então que, a rentabilidade das carcaças de avestruzes tem sido comparável à média mundial, demonstrando o empenho entre os criadores em produzir carne de avestruz de maneira competitiva, além da mesma apresentar características organolépticas e nutricionais que agradam ao consumidor.

Características qualitativas de produtos elaborados com carne de frango pálida e normal

Foram elaborados hambúrgueres e filés empanados com peitos de frango pálidos e normais e foram realizadas as seguintes análises de qualidade: cor, Perda de Peso por Cozimento (PPC), cisalhamento, Encolhimento por Fritura (EF), TBA, avaliação microbiológica e sensorial para os hambúrgueres, e TBA, análise microbiológica e análise sensorial para os filés empanados. As amostras de hambúrgueres elaboradas não diferiram significativamente (p > 0,05) nos parâmetros de coloração, EF, PPC e análise microbiológica e sensorial. Para análise de força de cisalhamento, houve diferença significativa (p < 0,05) entre os hambúrgueres no período de 7, 60 e 120 dias, sendo que os hambúrgueres elaborados com carne pálida (1,92; 1,31 e 1,46, respectivamente) apresentaram as menores médias quando comparados com os de carne normal (2,34; 1,85 e 1,73, respectivamente). Na análise de TBA, as amostras elaboradas com carne pálida também tiveram os maiores resultados com 90 a 180 dias de estocagem (5,28; 7,78; 8,89; 5,02) quando comparadas às de carne normal (2,62; 7,05; 8,08; 3,89). Para os filés empanados, não foram encontradas diferenças significativas (p > 0,05) entre a elaboração com carne de coloração normal e pálida para os parâmetros avaliados. Estes resultados demonstram que a carne pálida pode ser utilizada para a elaboração de produtos industrializados sem causar prejuízos em sua qualidade.

Sealability of MTA and calcium hydroxide-containing sealers

Objectives: The aim of this study was to evaluate the apical sealability of Fillapex (R), Endo-CPM-Sealer (R) and Sealapex (R). Material and Methods: Ninety-four freshly extracted single-rooted teeth were selected and decoronated. All teeth were radiographed to confirm the existence of a single and straight root canal, which was prepared using Protaper Universal and 2.5% sodium hypochlorite. The teeth were randomly divided in groups of 10 specimens each according to the sealer, and the canals were filled using the single cone technique and one of the sealers. Four additional teeth were used as controls. The teeth were submitted to dye leakage with Rhodamine B for 24 h but using vacuum on the initial 15 min. Thereafter, they were cut longitudinally and the leakage was measured in a linear fashion from apex to crown. Data were analyzed by ANOVA and Tukey's tests at 5% significance level. Results: Fillapex (R) and Sealapex (R) showed significantly less dye leakage than Endo-CPM-Sealer (R) (p<0.05). Conclusions: It was concluded that Fillapex (R) and Sealapex (R) were able to prevent apical dye leakage differently from Endo-CPM-Sealer (R).

A Mineral Trioxide Aggregate Sealer Stimulated Mineralization

The aim of this study was to evaluate the rat subcutaneous tissue response to implanted polyethylene tubes filled with Endo-CPM-Sealer (Portland Cement Modified Sealer) (EGEO S.R.L., Buenos Aires, Argentina) compared with Sealapex (SybronEndo, Glendora, CA) and Angelus MTA (Angelus, Londrina, Brazil). These materials were placed in polyethylene and dentin tubes and implanted into dorsal connective tissue of Wistar rats for 7, 15, 30, 60, and 90 days. The specimens were prepared to be stained with hematoxylin and eosin or Von Kossa or not stained for polarized light. Qualitative and quantitative evaluations of the reaction were performed. Both materials caused mild to moderate reactions at 7 days that decreased with time. The response was similar to the control on the 30th day with Endo-CPM-Sealer and Angelus MTA and on the 60th day with Sealapex. Mineralization and granulations birefringent to the polarized light were observed with all materials. it was possible to conclude that Endo-CPM-Sealer was biocompatible and stimulated mineralization. (J Endod 2009;35:256-260)

Endodontic Chelators Induce Nitric Oxide Expression by Murine-cultured Macrophages

Introduction: Endodontic chelators may extrude to apical tissues during instrumentation activating cellular events on periapical tissues. This study assessed in vitro the expression of nitric oxide (NO) concentrations by murine peritoneal macrophages after contact with MTAD (Dentsply/Tulsa, Tulsa, OK), Tetraclean (Ogna Laboratori Farmaceutici, Muggio, Italy), Smear Clear (Sybron Endo, Orange, CA), and EDTA (Biodinamica, Ibipora, PR, Brazil). Methods: Macrophage cells were obtained from Swiss mice after peritoneal lavage. Chelators were diluted in distilled water obtaining 12 concentrations, and MTT assay identified the concentrations, per group, displaying the highest cell viability (analysis of variance, p < 0.01). Selected concentrations were tested for NO expression using Griess reaction. Culture medium and lipopolysaccharide (LPS) were used as controls. Results: Analysis of variance and Tukey tests showed that all chelators displayed elevated NO concentrations compared with the negative control (p < 0.01). MTAD induced the lowest NO expression, followed by Tetraclean, EDTA, and Smear Clear. No difference was observed between MTAD and Tetraclean (p > 0.01), Tetraclean and EDTA (p > 0.01), and EDTA and Smear Clear (p > 0.01). LPS ranked similar to both EDTA and Smear Clear (p > 0.01). Conclusion: The tested endodontic chelators displayed severe proinflammatory effects on murine-cultured macrophages. Citric acid-based solutions induce lower No release than EDTA-based irrigants. (J Endod 2009;35:824-828)

Bacterial leakage in root canals filled with conventional and MTA-based sealers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ability of Gutta-Percha and Resilon to Fill Simulated Lateral Canals by Using the Obtura II System

Introduction: The aim of this study was to evaluate the ability of Resilon (Resilon Research, LLC, North Branford, CT) and 2 types of gutta-percha to fill simulated lateral canals when using the Obtura II system (Model 823-700; Obtura Spartan, Fenton, MO). Methods: Forty-five human single-rooted teeth were selected and subjected to root canal preparation. After that, simulated lateral canals were made at 2, 5, and 8 mm from the working length (WL). The specimens were divided into 3 groups (n = 15) according to the filling material used: Obtura Flow 150 gutta-percha (Obtura flow), Odous Endo Flow gutta-percha (Odous; Odous de Deus Ind e Corn. Ltda Belo Horizonte, MG, Brazil), and Resilon pellets (Resilon). Root canals were filled using the Obtura II system with the tip inserted to 3 mm from the WL. No sealer was used for root canal obturation. Specimens were subjected to a tooth decalcification and clearing method, and filling of the lateral canals was analyzed by digital radiography and photographs. The measurement of lateral canal filling was done using Image Tool software (UTHSCSA Image Tool for Windows version 3.0, San Antonio, TX). Data were statistically analyzed with the Kruskal-Wallis test at 5% significance. Results: All materials showed an ability to penetrate into the simulated lateral canals, with a minimum percentage of 73% in all thirds of the root canal. Conclusions: It was concluded that gutta-percha and Resilon are solid core materials with a lateral canal filling ability when used with the Obtura II system. (J Endod 2012;38:676-679)

Evaluation of pH and Calcium Ion Release of Root-end Filling Materials Containing Calcium Hydroxide or Mineral Trioxide Aggregate

Introduction: To evaluate calcium ion release and pH of Sealer 26 (S26) (Dentsply, Rio de Janeiro, RJ, Brazil), white mineral trioxide aggregate (MTA), Endo CPM Sealer (CPM1) (EGEO SRL Bajo licencia MTM Argentina SA, Buenos Aires, Argentina), Endo CPM Sealer in a thicker consistency (CPM 2), and zinc oxide and eugenol cement (ZOE). Methods: Material samples (n = 10) were placed in polyethylene tubes and immersed in 10 mL of distilled water. After 3, 6,12,24, and 48 hours and 7,14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. An empty tube was used as the control group. Results: The control group presented a pH value of 6.9 at all studied periods and did not show the presence of calcium ion. S26 presented greater hydroxyl ion release up to 12 hours (p < 0.05). From 24 hours until 28 days, S26, MTA, CPM1, and CPM2 had similar results. in ail periods, ZOE presented the lowest hydroxyl ion release. CPM1, followed by CPM2, released the most calcium ions until 24 hours (p < 0.05). Between 48 hours and 7 days, CPM1 and CPM2 had the highest release. A greater calcium ion release was observed for CPM2, followed by CPM1 at 14 days and for S26, CPM1, and CPM2 at 28 days. ZOE released the least calcium ions in all periods. Conclusion: Sealer 26, MTA, and Endo CPM sealer at normal or thicker consistency release hydroxyl and calcium ions. Endo CPM sealer may be an alternative as root-end filling material. (J Endod 2009;35:1418-1421)

Evaluation of the thermoplasticity of gutta-percha and Resilon (R) using the Obtura II System at different temperature settings

Aim To analyse the thermoplasticity of several endodontic filling materials using the Obtura II System at different temperature settings.Methodology The following materials based on gutta-percha: Regular Obtura (OBT), Obtura Flow 150 (OBT F), Endo Flow (EDF), Odous (ODO) and the synthetic thermoplastic polymer material Resilon (RE) were heated using the Obtura II System at three temperature settings (140, 170 and 200 degrees C). Samples of the heated materials were placed on the sensor of a digital thermometer (THR-140; Instrutherm, São Paulo, Brazil) to determine their real temperature (RT) when the system was set at 140 degrees C (from 64.5 to 69 degrees C), 170 degrees C (from 73.8 to 77.5 degrees C) and 200 degrees C (from 83.6 degrees C for EDF and 100 degrees C for RE). Specimens (n = 30) were made by placing samples of each material in metallic ring moulds and compressing them between two glass slabs. After 24 h, specimens (n = 10) were heated at the different settings (RT) and submitted to compression under a 5-kg load. Plasticization was assessed by calculating the differences between the post-compression and initial diameters of each specimen. Data were submitted to ANOVA and Tukey's test at 5% significance.Results At 140 degrees C, Obtura Flow presented the highest thermoplasticity values and Regular Obtura, the lowest. At 170 degrees C, Obtura Flow and Resilon demonstrated greater plasticization. Resilon had the highest mean thermoplasticity values at 200 degrees C.Conclusions Thermoplasticity values were influenced both by the temperature settings on the Obtura II System and by the type of material analysed. Obtura Flow and Resilon had the highest mean thermoplasticity values.

Histological and histomorphometrical evaluation of furcation perforations filled with MTA, CPM and ZOE

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

On the Apterous Line of the Termite Velocitermes heteropterus (Isoptera: Termitidae): Developmental Pathways and Cellulose Digestion

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Purification and characterization of the exopolygalacturonase produced by Aspergillus giganteus in submerged cultures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)