Factorial Design of Modelling Mix Proportion Parameters of Underwater Composite Cement Grouts

There is an increasing need to identify the rheological properties of cement grout using a simple test to determine the fluidity, and other properties of underwater applications such as washout resistance and compressive strength. This paper reviews statistical models developed using a factorial design that was carried out to model the influence of key parameters on properties affecting the performance of underwater cement grout. Such responses of fluidity included minislump and flow time measured by Marsh cone, washout resistance, unit weight, and compressive strength. The models are valid for mixes with 0.35–0.55 water-to-binder ratio (W/B), 0.053–0.141% of antiwashout admixture (AWA), by mass of water, and 0.4–1.8% (dry extract) of superplasticizer (SP), by mass of binder. Two types of underwater grout were tested: the first one made with cement and the second one made with 20% of pulverised fuel ash (PFA) replacement, by mass of binder. Also presented are the derived models that enable the identification of underlying primary factors and their interactions that influence the modelled responses of underwater cement grout. Such parameters can be useful to reduce the test protocol needed for proportioning of underwater cement grout. This paper attempts also to demonstrate the usefulness of the models to better understand trade-offs between parameters and compare the responses obtained from the various test methods that are highlighted.

A statistical framework for the design of microarray experiments and effective detection of differential gene expression

Motivation: Microarray experiments generate a high data volume. However, often due to financial or experimental considerations, e.g. lack of sample, there is little or no replication of the experiments or hybridizations. These factors combined with the intrinsic variability associated with the measurement of gene expression can result in an unsatisfactory detection rate of differential gene expression (DGE). Our motivation was to provide an easy to use measure of the success rate of DGE detection that could find routine use in the design of microarray experiments or in post-experiment assessment.

Factors influencing eating a varied diet in old age

OBJECTIVE:
To investigate the influences of resources and food-related goals on the variety of food choice among older people.
DESIGN:
A questionnaire-based survey in eight European countries: Poland, Portugal, United Kingdom, Germany, Sweden, Denmark, Italy and Spain.
SUBJECTS:
Participants (n 3200) were above 65 years of age and living in their own homes. The samples were quota samples, eight groups of fifty in each country, based on gender, age and living circumstances, reflecting the diversity of each of the national populations based on education, income and urbanization of living environment.
RESULTS:
Hierarchical multiple regression analysis showed that income, health status, access to a car and living arrangement affected the level of dietary variety. The perceived level of different food-related resources impacted the consumption of a varied diet over and above actual resource levels. Food-related goals contributed to variety of food intake that was not accounted for by the amount of material resources possessed or the social and other resources perceived to be possessed.
CONCLUSIONS:
Older people's variety of food intake depended on material resources (e.g. monthly income, access to a car, living arrangement, physical and mental health). However, in addition to these variables, the way older people perceived other resources, such as their level of appetite, their food knowledge, their perception of the distance to the shops, access to high-quality products, having better kitchen facilities, access to good service providers and support from friends and neighbours, all contributed to how varied a diet they ate.

Agitating for a design and regeneration agenda in a postconflict city: the case of Belfast

Introduction

Belfast has been a focus of academic attention for the last forty years with most interest centred on various aspects of ‘the Troubles’. Where there has been interest in the built environment, it has largely been about how the ‘security situation’ impacted directly on architecture and on the design and layout of social housing. This paper seeks to go beyond this to explore how the political- administrative culture of ‘the Troubles’ interacted with ‘normal’ market forces to shape the central area of the city, and to consider the responses of a recently formed activist group, known as the Forum for Alternative Belfast (hereafter referred to as the Forum). The paper is written by three of the directors of the Forum.1 Moreover, the empirical research presented here was undertaken by the Forum as part of a campaign to address issues relating to the design, layout and quality of Belfast’s built environment. In the longstanding tradition of participant observation working within an action-research paradigm, the participants have attempted to offer an account that is evidentially and purposefully selfcritical and reflective. It is of course recognised that while this approach offers many positive attributes, such as phenomenological access through immersion in the project, it also has the potential to bring compromise on research detachment and objectivity.2 To address the latter, the authors have attempted
to avoid polemical argument, and to support claims with primary or secondary research evidence. The authors also acknowledge that action-research has a chequered history; however, they would argue
that their approach is faithful to a concept that sees ‘research’ defined as understanding and ‘action’ defined as seeking change. The Forum’s very purpose is to seek change, but to do this requires evidence, collaboration and demonstration. And in this sense, it is a learning process for all participants, including the research activists, government officials, community organisations and students. The authors also recognise the complexity of factors that affect urban management and change, particularly in a city such as Belfast, which has had to cope with political violence for over thirty years. And they appreciate that in the context of conflict, governance is skewed to cope with political realities. Hamdi reminds us, however, that in practice there is an ‘important dialectic between top-down planning, with its formal and designed laws and structures, and bottom-up selforganizing collectivism—those “quantum and emergent systems” which Jane Jacobs argued long ago give cities their life and order.’3

Factors influencing patients with stage 5 chronic kidney disease to opt for conservative management: a practitioner research study

Aims and objectives. This study explored decision-making experiences of patients with stage 5 chronic kidney disease when opting for conservative management of their renal failure.

Background. Dialysis is an invasive treatment, and for some older patients, there is an associated treatment burden of dialysis-related symptoms. An alternative choice is conservative management, but little is known about those who make this decision and how they are supported through the process.

Design. Qualitative practitioner research study.

Method. Data were generated from nine patients' naturally occurring clinic consultations with a renal clinical nurse specialist between May 2010 - July 2010. Interviews were transcribed verbatim and findings fed back at three multi-disciplinary meetings to check for relevance and resonance. Common themes were identified and codes applied.

Results. Patients reported age and having to travel three times a week to hospital for dialysis as reasons not to opt for treatment. Others felt well without dialysis not wanting to upset the 'status quo' or to burden loved ones. Most felt equipped to make the decision following explanation and discussion with the clinical nurse specialist in the renal clinic.

Conclusions. Patients opting for conservative management give numerous reasons for this including old age, travel limitations, feeling well without dialysis and not wanting to be a burden, but appear content with their decision. One-to-one discussions with the clinical nurse specialist appear helpful during the decision-making process presenting an opportunity for advancing nursing roles in the chronic kidney disease service.

Relevance to clinical practice. Understanding patients' reasons for refusing dialysis assists in supporting until death. There is an opportunity for developing nursing practice to meet the multi-faceted needs of this group.

Contribution of process variables to the entrapment efficiency of propranolol hydrochloride within ethylcellulose microspheres prepared by the solvent evaporation method as evaluated using a factorial design

The effects of the process variables, pH of aqueous phase, rate of addition of organic, polymeric, drug-containing phase to aqueous phase, organic:aqueous phase volume ratio and aqueous phase temperature on the entrapment of propranolol hydrochloride in ethylcellulose (N4) microspheres prepared by the solvent evaporation method were examined using a factorial design. The observed range of drug entrapment was 1.43 +/- 0.02%w/w (pH 6, 25 degrees C, phase volume ratio 1:10, fast rate of addition) to 16.63 +/- 0.92%w/w (pH 9, 33 degrees C, phase volume ratio 1:10, slow rate of addition) which corresponded to mean entrapment efficiencies of 2.86 and 33.26, respectively. Increased pH, increased temperature and decreased rate of addition significantly enhanced entrapment efficiency. However, organic:aqueous phase volume ratio did not significantly affect drug entrapment. Statistical interactions were observed between pH and rate of addition, pH and temperature, and temperature and rate of addition. The observed interactions involving pH are suggested to be due to the abilities of increased temperature and slow rate of addition to sufficiently enhance the solubility of dichloromethane in the aqueous phase, which at pH 9, but not pH 6, allows partial polymer precipitation prior to drug partitioning into the aqueous phase. The interaction between temperature and rate of addition is due to the relative lack of effect of increased temperature on drug entrapment following slow rate of addition of the organic phase. In comparison to the effects of pH on drug entrapment, the contributions of the other physical factors examined were limited.

Environmental, lifestyle, and familial/ethnic factors associated with myeloproliferative neoplasms

Myeloproliferative neoplasms (MPNs) are characterized by overproduction of mature functional blood cells and are often associated with an acquired genetic mutation of Janus Kinase 2V617F. The etiology of MPNs remains unknown. The aim of this article was to review and collate all known published data investigating environmental and lifestyle factors associated with MPNs. Medline, Embase, PubMed, Cochrane, and Web of Science were systematically searched using terms for MPNs and observational study designs to identify studies investigating the risk factors for MPNs published before March 2010. Of 9,156 articles identified, 19 met the selection criteria. Although the studies exhibited heterogeneity, in case definitions, study design, and risk factors investigated, several themes emerged. A strong association was found with Jewish descent, and with a family history of MPNs. Autoimmune conditions, specifically Crohn's disease, were more common in patients with MPNs. Certain occupational groups were significantly associated with MPNs including occupations with potential exposure to benzene and/or petroleum. Blood donation was associated with an increased risk of polycythemia vera specifically. The vast heterogeneity in studies identified as part of this review suggests that large scale systematic assessment of etiological factors associated with MPNs is warranted. (C) 2011 Wiley-Liss, Inc.

FACTORIAL EXPERIMENTAL-DESIGN FOR CONCRETE DURABILITY RESEARCH

It is widely accepted that concrete designed to perform satisfactorily in adverse environmental conditions must have a high cement content and a low water-cement ratio. In addition, in order to enhance its durability, many types of additive and admixture such as super-plasticizers, fly ash, silica fume, ggbfs, etc., have been used in the past. However, a close study of the published literature indicates that the effect of mix variables on the durability and the interaction between the various ingredients are not fully understood. Some of these apparent contradictions are due to the limitations in the design of the experimental programme. For instance, it is evident that relatively higher concentrations of aggregates increase the tortuosity of the flow path and hence reduce the permeability, which results in an improvement in the durability. Therefore, an increase in cement content without a proportional decrease in water-cement ratio may reduce the durability. In such cases, the interactive effects of factors can be established by resorting to a properly designed experimental programme, such as the factorial experimental design.

Confined site construction: An empirical analysis of factors impacting health and safety management

Purpose – The purpose of this paper is to identify, clarify and tabulate the various managerial issues encountered, to aid in the management of the complex health and safety concerns which occur within a confined construction site environment.

Design/methodology/approach – This is achieved through conducting extensive qualitative and qualitative research in the form of case studies, interviews and questionnaire survey.

Findings – The leading managerial issues in the management of health and safety on a confined construction site are found to be: “Difficulty to move materials around site safely”; “Lack of adequate room for the effective handling of materials”; “Difficulty in ensuring site is tidy and all plant and materials are stored safely”; “Close proximity of individuals to operation of large plant and machinery”; and joint fifth “Difficulty in ensuring proper arrangement and collection of waste materials on-site” along with “Difficulty in controlling hazardous materials and equipment on site”.

Practical implications – The resulting implication for practice of these results can be summarised by identifying that with sustained development of urban centres on a global scale, coupled with the increasing complexity of architectural designs, the majority of on-site project management professionals are faced with the onerous task of completing often intricate designs within a limited spatial environment, under strict health and safety parameters.

Originality/value – The subsequent value of the findings are such that just as on-site management professionals successfully identify the various managerial issues highlighted, the successful management of health and safety on a confined construction site is attainable.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - Part II: Parametric study and proposed design equations

A parametric study of cold-formed steel sections with web openings subjected to web crippling was undertaken using finite element analysis, to investigate the effects of web holes and cross-section sizes on the web crippling strengths of channel sections subjected to web crippling under both interior-two-flange (ITF) and end-two-flange (ETF) loading conditions. In both loading conditions, the hole was centred beneath the bearing plate. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the flat depth of the web, and the ratio of the length of bearing plates to the flat depth of the web. In this paper, design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

International Projects and Cross-Cultural Adjustment of British Expatriates in Middle East: A Qualitative Investigation of Influencing Factors

Increased globalisation within the British AEC (Architectural, Engineering and Construction) sector has increased the need for companies to transfer staff to manage their overseas operations. To be able to perform abroad, expatriates must harmonise themselves to the conditions prevailing in the host country. These include getting accustomed to living, working and interacting with the host country nationals. The process is commonly referred to as 'cross-cultural adjustment'. Various factors influence the process of adjustment. In order to identify these issues, a qualitative study was undertaken, which mainly comprised of comprehensive literature review, individual interviews and focus group discussion with British expatriates working on international AEC assignments in Middle Eastern countries. Through interpretative approach, the current study aims to understand the concept of cross-cultural adjustment of British Expatriates based in Middle East and their influencing factors.

The findings suggest that success of expatriation does not entirely rest on an expatriate's ability but also on organisational support and assistance that expatriates receive prior to and during the assignment. Organisational factors such as selection mechanisms, job design, training, logistical and social support, mentoring, etc., influence various facets of expatriate adjustment. Striking cultural contrasts between British and Arab culture both in work and non work situations also dictate the level of support required by the expatriate, suggesting that relocation to less developed, remote or politically unstable regions, demands additional support and consideration by the parent company. This study is relevant to the AEC companies employing British expatriates, who need to be cognisant of the issues highlighted above to make rational and informed decisions when handling international assignments in the Middle East.

Integrating textual analysis and evidential reasoning for decision making in Engineering design

Decision making is an important element throughout the life-cycle of large-scale projects. Decisions are critical as they have a direct impact upon the success/outcome of a project and are affected by many factors including the certainty and precision of information. In this paper we present an evidential reasoning framework which applies Dempster-Shafer Theory and its variant Dezert-Smarandache Theory to aid decision makers in making decisions where the knowledge available may be imprecise, conflicting and uncertain. This conceptual framework is novel as natural language based information extraction techniques are utilized in the extraction and estimation of beliefs from diverse textual information sources, rather than assuming these estimations as already given. Furthermore we describe an algorithm to define a set of maximal consistent subsets before fusion occurs in the reasoning framework. This is important as inconsistencies between subsets may produce results which are incorrect/adverse in the decision making process. The proposed framework can be applied to problems involving material selection and a Use Case based in the Engineering domain is presented to illustrate the approach. © 2013 Elsevier B.V. All rights reserved.

The United Kingdom Glaucoma Treatment Study:a multicenter, randomized, placebo-controlled clinical trial: design and methodology

Elevated intraocular pressure (IOP) is a major risk factor for the deterioration of open-angle glaucoma (OAG); medical IOP reduction is the standard treatment, yet no randomized placebo-controlled study of medical IOP reduction has been undertaken previously. The United Kingdom Glaucoma Treatment Study (UKGTS) tests the hypothesis that treatment with a topical prostaglandin analog, compared with placebo, reduces the frequency of visual field (VF) deterioration events in OAG patients by 50% over a 2-year period.

Assessment of factors that influence physician decision making regarding medication use in patients with dementia at the end of life

Objective
This study aimed to evaluate the extent to which patient-related factors and physicians' country of practice (Northern Ireland [NI] and the Republic of Ireland [RoI]) influenced decision making regarding medication use in patients with end-stage dementia.

Methods
The study utilised a factorial survey design comprising four vignettes to evaluate initiating/withholding or continuing/discontinuing specific medications in patients with dementia nearing death. Questionnaires and vignettes were mailed to all hospital physicians in geriatric medicine and to all general practitioners (GPs) in NI (November 2010) and RoI (December 2010), with a second copy provided 3 weeks after the first mailing. Logistic regression models were constructed to examine the impact of patient-related factors and physicians' country of practice on decision making. Significance was set a priori at p ≤ 0.05. Free text responses to open questions were analysed qualitatively using content analysis.

Results
The response rate was 20.6% (N = 662) [21.1% (N = 245) for GPs and 52.1% (N = 38) for hospital physicians in NI, 18.3% (N = 348) for GPs and 36.0% (N = 31) for hospital physicians in RoI]. There was considerable variability in decision making about initiating/withholding antibiotics and continuing/discontinuing the acetylcholinesterase inhibitor and memantine hydrochloride, and less variability in decision making regarding statins and antipsychotics. Patient place of residence and physician's country of practice had the strongest and most consistent effects on decision making although effect sizes were small.

Conclusions
Further research is required into other factors that may impact upon physicians' prescribing decisions for these vulnerable patients and to clarify how the factors examined in this study influence prescribing decisions.

Transmit and receive filter design for OFDM based WLAN systems

We analyze the effect of different pulse shaping filters on the orthogonal frequency division multiplexing (OFDM) based wireless local area network (LAN) systems in this paper. In particular, the performances of the square root raised cosine (RRC) pulses with different rolloff factors are evaluated and compared. This work provides some guidances on how to choose RRC pulses in practical WLAN systems, e.g., the selection of rolloff factor, truncation length, oversampling rate, quantization levels, etc.