Poka-yoke for mass customization

Producing high quality products and services is one of the key concerns in order to keep up with the competition in the global markets. Companies are putting a great effort on preventing customers having faulty products and services by any means. However, the total elimination of mistakes in manufacturing processes has always been a great challenge for quality management. In this thesis the applicability of poka-yoke methodology in reducing the number of quality failures in the case company has been studied. Poka-yoke stands for the mistake-proofing and is mainly developed for the purpose of eliminating human errors in manufacturing processes. Inspection techniques; judgment, informative and source inspection are in the core of this methodology. Mass customization and large configurability of products leads to situation where the root causes of quality problems may vary a lot. To study the effects of these factors extensive analysis of quality failures was conducted. Recommendations and proposals for further actions regarding problem solving processes and utilization of mistake-proofing methods were provided on the basis of the analysis.

Estudi de la comprensió i de les estratègies per resoldre problemes de suma i resta

Aquest treball de recerca estudia i analitza la comprensió i les estratègies utilitzades per alumnes de 2n de primària a l’hora de resoldre problemes aritmètics de suma i resta. Per aconseguir aquest propòsit, s’ha portat a terme el disseny i l’aplicació d’una prova individual de resolució de problemes, passada abans i després d’una intervenció educativa enfocada a millorar les dificultats detectades a l’hora de resoldre problemes. A partir de l’anàlisi de les dades obtingudes es verificarà si després de treballar el procés de resolució i d’incidir en les estratègies per resoldre problemes additius amb els alumnes millora la comprensió i les estratègies aparegudes s’adeqüen al tipus d’operació aritmètica que es demana.

International journal of engineering education

This work presents an analysis of the assessment tools used by professors at the Universitat Politécnica de Catalunya to assess the generic competencies introduced in the Bachelor’s Degrees in Engineering. In order to conduct this study, a survey was designed and administered anonymously to a sample of the professors most receptive to educational innovation at their own university. All total, 80 professors responded to this survey, of whom 26% turned out to be members of the university’s own evaluation innovation group (https://www.upc.edu/rima/grups/grapa), GRAPA. This percentage represents 47% of the total GRAPA membership, meaning that nearly half of the professors most concerned about evaluation at the university chose to participate. The analysis of the variables carried out using the statistical program SPSS v19 shows that for practically 49% of those surveyed, rubrics are the tools most commonly used to assess generic competencies integrated in more specific ones. Of those surveyed, 60% use them either frequently or always. The most frequently evaluated generic competencies were teamwork (28%), problem solving (26%), effective oral and written communication (24%) and autonomous learning (13%), all of which constitute commonly recognized competencies in the engineering profession. A two-dimensional crosstabs analysis with SPSS v19 shows a significant correlation (Asymp. Sig. 0.001) between the type of tool used and the competencies assessed. However, no significant correlation was found between the type of assessment tool used and the type of subject, type of evaluation (formative or summative), frequency of feedback given to the students or the degree of student satisfaction, and thus none of these variables can be considered to have an influence on the kind of assessment tool used. In addition, the results also indicate that there are no significant differences between the instructors belonging to GRAPA and the rest of those surveyed

Model-based objects recognition in man-made environments

We describe a model-based objects recognition system which is part of an image interpretation system intended to assist autonomous vehicles navigation. The system is intended to operate in man-made environments. Behavior-based navigation of autonomous vehicles involves the recognition of navigable areas and the potential obstacles. The recognition system integrates color, shape and texture information together with the location of the vanishing point. The recognition process starts from some prior scene knowledge, that is, a generic model of the expected scene and the potential objects. The recognition system constitutes an approach where different low-level vision techniques extract a multitude of image descriptors which are then analyzed using a rule-based reasoning system to interpret the image content. This system has been implemented using CEES, the C++ embedded expert system shell developed in the Systems Engineering and Automatic Control Laboratory (University of Girona) as a specific rule-based problem solving tool. It has been especially conceived for supporting cooperative expert systems, and uses the object oriented programming paradigm

The use of mini-projects in an undergraduate laboratory course in chemistry

This paper reports the results of a three-year study of the effectiveness of mini-projects in a first year laboratory course in chemistry at a Scottish university. A mini-project is a short, practical problem which requires for its solution the application of the knowledge and skills developed in previously completed set experiments. A number of recommendations have been made about the most appropriate ways of introducing mini-projects into undergraduate laboratory course. The main hypothesis of this survey was concerned with the value of mini-projects in laboratory courses formulated within the context of Information Processing Theory.

Individual differences in control of language interference in late bilinguals are mainly related to general executive abilities

Background: Recent research based on comparisons between bilinguals and monolinguals postulates that bilingualism enhances cognitive control functions, because the parallel activation of languages necessitates control of interference. In a novel approach we investigated two groups of bilinguals, distinguished by their susceptibility to cross-language interference, asking whether bilinguals with strong language control abilities ('non-switchers") have an advantage in executive functions (inhibition of irrelevant information, problem solving, planning efficiency, generative fluency and self-monitoring) compared to those bilinguals showing weaker language control abilities ('switchers"). Methods: 29 late bilinguals (21 women) were evaluated using various cognitive control neuropsychological tests [e.g., Tower of Hanoi, Ruff Figural Fluency Task, Divided Attention, Go/noGo] tapping executive functions as well as four subtests of the Wechsler Adult Intelligence Scale. The analysis involved t-tests (two independent samples). Non-switchers (n = 16) were distinguished from switchers (n = 13) by their performance observed in a bilingual picture-naming task. Results: The non-switcher group demonstrated a better performance on the Tower of Hanoi and Ruff Figural Fluency task, faster reaction time in a Go/noGo and Divided Attention task, and produced significantly fewer errors in the Tower of Hanoi, Go/noGo, and Divided Attention tasks when compared to the switchers. Non-switchers performed significantly better on two verbal subtests of the Wechsler Adult Intelligence Scale (Information and Similarity), but not on the Performance subtests (Picture Completion, Block Design). Conclusions: The present results suggest that bilinguals with stronger language control have indeed a cognitive advantage in the administered tests involving executive functions, in particular inhibition, self-monitoring, problem solving, and generative fluency, and in two of the intelligence tests. What remains unclear is the direction of the relationship between executive functions and language control abilities.

Liiketoimintaprosessien analysointi ja kehityskohteiden tunnistaminen

Organisaatiot ovat viime vuosikymmeninä havainneet perinteisen, funktionaalisen, organisaatiorakenteen riittämättömäksi vastaamaan alati muuttuvan toimintaympäristön tuomiin haasteisiin. Ratkaisuna organisaatiot ovat alkaneet ajatella toimintaansa prosessikeskeisesti, jolloin toiminnot nähdään organisaation osastojen läpileikkaavina prosesseina. Tulevaisuuden menestyksen turvaamiseksi organisaatioiden tulee parantaa prosessien suorituskykyä jatkuvasti. Työn tutkimuskohteena on yksi case-yrityksen liiketoimintaprosesseista. Työn tavoitteena on analysoida valittua prosessia, tunnistaa mahdolliset kehityskohteet ja antaa tunnistetuille kohteille toimenpidesuositukset. Prosessianalyysia varten valittu liiketoimintaprosessi mallinnettiin. Tehtyjen prosessikuvausten, haastattelujen ja keskustelujen perusteella tunnistettiin prosessin kriittinen vaihe ja sen nykytilassa ilmenevät ongelmat. Tehdyn analyysin perusteella tunnistettiin prosessin ydinongelma sekä muita pienempiä kehityskohteita. Kaikille kehityskohteille annettiin lopuksi toimenpidesuositukset.

Epäpuhtauksien optinen laskenta sulpusta

Työn tarkoituksena oli hakea mittausjärjestelmän raja-arvoja optiselle kamerapohjaiselle roskalaskentajärjestelmälle sekä testata roskalaskentajärjestelmän toimivuus käytännössä. Tavoitteena oli tuotteistaa kamerapohjainen roskalaskenta-analyysi palvelutuotteeksi, jota voitaisiin hyödyntää sihtien kuntokartoituksessa ja ongelmanratkaisuvälineenä. Teoriaosa koostui kahdesta kokonaisuudesta: sulpun epäpuhtauksista, roskalaskennan teoriasta ja epäpuhtauksien mittausmenetelmistä sekä markkinoinnista, tuotteistamis- ja lanseerausprosessista palvelutuotteen näkökulmasta. Kokeellisessa osassa selvitettiin kamerapohjaiseen roskalaskentaanalyysiin vaikuttavia tekijöitä: kameran tarkennus, kuvan terävyys, analysoitavan arkin väri, neliömassa ja roskapitoisuus, impregnointi, valonlähde, kuvan muokkaus, tiedostomuoto ja pikselimäärä. Kamerapohjaisen roskalaskenta-analyysin soveltuvuus käytäntöön testattiin tehdasesimerkin avulla. Havaittiin, että kamerapohjaista roskalaskenta-analyysiä voitaisiin käyttää lähes kaikille massatyypeille. Työssä määriteltiin kalibrointimenetelmä kameran tarkentamiseksi arkin tasoon sekä suljinnopeusanalyysi massatyypistä riippuvan suljinnopeuden selvitykseen. Kamerapohjaisessa roskalaskenta-analyysissä määritettiin käytettäväksi arkin neliömassana 60 g/m2, suljinaukkoa F5 ja terävyysasetusta 5. Tulokseksi saatiin, että analysoitavia arkkeja ei tarvitse impregnoida tai jälkikäsitellä. Korrelaatiota Somerville-erotustehokkuuteen ei löytynyt. Esimerkkitehtaasta selvitettiin primääriportaan roskapitoisuudet ja erotustehokkuudet. Tehdasesimerkin tulosten perusteella havaittiin happivaiheen ja D0-vaiheen olleen tehokkaimpia epäpuhtauksien poistajia.

Harjoitustöiden vertaisarviointi opetusvälineenä

Harjoitustöiden vertaisarvioinnissa opiskelijat tarkastavat toistensa töitä ja antavat niistä palautteen annettujen ohjeiden mukaan. Yleensä opiskelijoille annetaan tätä tehtävää tukemaan tietty joukko arviointikriteereitä, joiden osalta työtä ainakin on kommentoitava. Vertaisarviointi voi antaa opiskelijoille monipuolisempaa palautetta kuin ilman sitä olisi mahdollista, mahdollisuuden tehtävien vaihtoehtoisiin ratkaisuihin tutustumiseen sekä kokemusta ongelmanratkaisun analyyttisestä ja kriittisestä tarkastelusta. Lisäksi vertaisarviointi voi tukea opettajien työtä helpottamalla riittävän palautteen antamista opiskelijoille ja antamalla jonkinlaista kuvaa opiskelijoiden näkemyksistä tehtävän aihealueeseen liittyen. Tämän työn tavoitteena on selvittää, mitä mainituista vertaisarviointiin liitetyistä hyödyistä voidaan todellisuudessa saavuttaa ohjelmointipainotteisilla kursseilla. Ohjelmointikurssin opiskelijat arvioivat kurssiin kuuluvien harjoitustöiden yhteydessä toistensa ratkaisuja yhteen tehtävistä. Opiskelijoille suunnatulla kyselyllä pyritään kartoittamaan, kuinka hyvin vertaisarvioinnille asetetut tavoitteet toteutuvat. Kokemuksia opettajan näkökulmasta selvitetään haastattelujen avulla. Testauksen toteutuksessa käytetään verkkosovellusta, johon opiskelijat tallentavat omat työnsä, josta he lataavat itselleen määrätyt työt arvioitavaksi, johon he tallentavat arvionsa ja jonka kautta he lopulta saavat palautteen omasta työstään.

GPRS/EDGE Session Tracing and Analysis in Abis and AGPRS Interfaces

Efficient problem solving in cellular networks is important when enhancing the network performance and liability. Analysis of calls and packet switched sessions in protocol level between the network elements is an important part of this process. They can provide very detailed information about error situations which otherwise would be difficult to recognise. In this thesis we seek solutions for monitoring GPRS/EDGE sessions in two specific interfaces simultaneously in such manner that all information important to the users will be provided in easily understandable form. This thesis focuses on Abis and AGPRS interfaces of GSM radio network and introduces a solution for managing the correlation between these interfaces by using signalling messages and common parameters as linking elements. ~: Finally this thesis presents an implementation of GPRS/EDGE session monitoring application for Abis and AGPRS interfaces and evaluates its benefits to the end users. Application is implemented as a part of Windows based 3G/GSM network analyser.

Design and manufacture of a microdistillation column

Aim of this thesis was to design and manufacture a microdistillation column. The literature review part of this thesis covers stainless steels, material processing and basics about engineering design and distillation. The main focus, however, is on the experimental part. Experimental part is divided into five distinct sections: First part is where the device is introduced and separated into three parts. Secondly the device is designed part by part. It consists mostly of detail problem solving, since the first drawings had already been drawn and the critical dimensions decided. Third part is the manufacture, which was not fully completed since the final assembly was left out of this thesis. Fourth part is the test welding for the device, and its analysis. Finally some ideas for further studies are presented. The main goal of this thesis was accomplished. The device only lacks some final assembly but otherwise it is complete. One thing that became clear during the process was how difficult it is to produce small and precise steel parts with conventional manufacturing methods. Internal stresses within steel plates and thermal distortions can easily ruin small steel structures. Designing appropriate welding jigs is an important task for even simple devices. Laser material processing is a promising tool for this kind of steel processing because of the flexibility, good cutting quality and also precise and low heat input when welding. Next step in this project is the final assembly and the actual distillation tests. The tests will be carried out at Helsinki University of Technology.

Engendering Group Support Based Foresight for Capital Intensive Manufacturing Industries - Case Paper and Steel Industry Scenarios by 2018

In recent times of global turmoil, the need for uncertainty management has become ever momentous. The need for enhanced foresight especially concerns capital-intensive industries, which need to commit their resources and assets with long-term planning horizons. Scenario planning has been acknowledged to have many virtues - and limitations - concerning the mapping of the future and illustrating the alternative development paths. The present study has been initiated to address both the need of improved foresight in two capital-intensive industries, i.e. the paper and steel industries and the imperfections in the current scenario practice. The research problem has been approached by engendering a problem-solving vehicle, which combines, e.g. elements of generic scenario process, face-to-face group support methods, deductive scenario reasoning and causal mapping into a fully integrated scenario process. The process, called the SAGES scenario framework, has been empirically tested by creating alternative futures for two capital-intensive industries, i.e. the paper and steel industries. Three scenarios for each industry have been engendered together with the identification of the key megatrends, the most important foreign investment determinants, key future drivers and leading indicators for the materialisation of the scenarios. The empirical results revealed a two-fold outlook for the paper industry, while the steel industry future was seen as much more positive. The research found support for utilising group support systems in scenario and strategic planning context with some limitations. Key perceived benefits include high time-efficiency, productivity and lower resource-intensiveness. Group support also seems to enhance participant satisfaction, encourage innovative thinking and provide the users with personalised qualitative scenarios.

Aineettoman pääoman ja organisaatio-osaamisen hyödyntäminen

Tutkimuksen tarkoitus: Tutkimuksen tavoitteena on selvittää miten Tuomi Yhtiöt Oy:n aineetonpääoma ja organisaatio-osaaminen vaikuttavat yrityksen menestymiseen taantuman aikana 2008- 2009. Tutkimus ajoittuu maailman talouden kulminaatiopisteeseen, jossa voidaan tarkastella sekä mikro- että makrotalouden tunnuksilla miten yritys on menestynyt ja toiminut ajanjakson aikana. Tutkimuksen teoria on liiketaloustieteiden tutkimusmenetelmien mukaista, ja perustoiminnoiltaan normatiivista sekä empiiristä ongelmanratkaisua. Työssä käytettään laaja-alaisesti yrityksen faktatietoja, sekä aineettoman pääoman mittaamiseen tehtyä mittaristoa joka on rakennettu tutkimusta varten. Tuloksina saadaan yrityksen kannalta keskeiset organisaatio- ja aineettoman pääoman tunnusluvut, joita vertaillaan johtamisjärjestelmän tunnuslukuihin. Tutkimuksen yhteydessä on löydetty uusi asiakashallintamalli jolle ei ole saatavilla valmista sovellutusta. Yhteenvetona voidaan osoittaa yrityksen heikkoudet sekä menestyminentarkasteluajanjaksolla ja todistaa näiden yhteys kokonaisuuteen

Proceso de transformación de las concepciones del profesorado sobre la resolución de problemas matemáticos

The aim of this study is to analyze the transformation of Primary School teachers’ conceptions about mathematical problem solving. We performed a study with 18 teachers from three public schools: in each class (from 1º to 6º) there were two interventions, and we were interviewed teachers before and after them. The results have show identified changes in: 1) teacher’s expectations about students’ abilities; classroom management; perception of diversity; mathematical strategies used by students; communication in the classroom; causes of the problems encountered; and relevance process of problem solving in mathematics teaching. The transformation of teachers’ conceptions is due to the following factors: a) awareness of the practice; b) systematic reflection; c) the contrast between different ways to work solving problems in math class