Attachment of Combination Rails to Concrete Parapets Utilizing Epoxy Adhesive Anchors, RPFP-IOWA-1, 2015

The Iowa Department of Transportation (IaDOT) was interested in investigating the use of epoxy adhesive anchorages for the attachment of posts used in the BR27C combination bridge rail system. Alternative anchorage concepts were developed using a modified version of the ACI 318-11 procedures for embedded anchor design. Four design concepts were developed for review by IaDOT, including: (1) a four-bolt square anchorage, (2) a four-bolt spread anchorage, (3) a twobolt centered anchorage, and (4) a two-bolt offset anchorage. IaDOT representatives selected the four-bolt spread anchorage and the two-bolt offset anchorage as the preferred designs for evaluation. In addition to these two proposed configurations, IaDOT also requested that the researchers evaluate a third option that had been previously installed on the US-20 bridge near Hardin, IA. The proposed alternative anchorages and the original cast-in-place anchorage for the BR27C combination bridge rail were evaluated through dynamic component testing. The test of the original cast-in-place anchorage was used a baseline for comparison with the alternative designs. Test no. IBP-1 of the original cast-in-place anchorage developed a peak load of 22.9 kips (101.9 kN) at a deflection of 1.5 in. (38 mm). All three of the tested alternative anchorages provided greater load capacity than the original cast-in-place design and were deemed acceptable surrogates. Of the three alternative designs, the two-bolt offset design was deemed the best option.

In-Street Yield to Pedestrian Sign Application in Cedar Rapids, Iowa, 2003

Vehicle-pedestrian crashes are a major concern for highway safety analysts. Research reported by Hunter in 1996 indicated that one-third of the 5,000 vehicle-pedestrian crashes investigated occurred at intersections, and 40 percent of those were at non-controlled intersections (Hunter et al. 1996). Numerous strategies have been implemented in an effort to reduce these accidents, including overhead signs, flashing warning beacons, wider and brighter markings on the street, and advanced crossing signs. More recently, pedestrian-activated, in-street flashing lights at the crosswalk and pedestrian crossing signs in the traffic lane have been investigated. Not all of these strategies are recognized as accepted practices and included in the Manual on Uniform Traffic Control Devices (MUTCD), but the Federal Highway Administration (FHWA) is supportive of experimental applications that may lead to effective technology that helps reduce crashes.

VVER-640 -reaktorityypin passiiviset turvallisuusominaisuudet

Turvallisuussuunnittelu muodostaa merkittävän osan ydinvoimalaitoksen suunnit-telutyöstä. Uusissa laitoskonsepteissa turvallisuutta on pyritty parantamaan lisää-mällä perinteisten aktiivisten hätäjärjestelmien rinnalle passiivisia eli toiminnal-taan puhtaasti luonnonlakeihin perustuvia hätäjärjestelmiä. Sähköteholtaan 640 MW oleva VVER-640 -laitostyyppi edustaa tässä suhteessa viimeisintä kehi-tysaskelta venäläisten VVER kevytvesireaktorien sarjassa. Suunnittelun lähtökoh-tana on ollut turvallisuuden parantaminen verrattuna aikaisempiin VVER-malleihin. Tähän on pyritty hätäjärjestelmien passiivisella toteutuksella. Passiivis-ten järjestelmien mitoitusperusteena on ollut laitoksen selviäminen itsenäisesti 24 tunnin ajan mahdollisissa onnettomuustilanteissa ilman suojarakennuksen tiiviy-den menetystä. Relap5-ohjelmalla tehtyjen simulointien perusteella laitoksen pas-siiviset järjestelmät näyttäisivät pystyvän huolehtimaan laitoksen turvallisuudesta sekä jäähdytteen- että sähkönmenetysonnettomuuksissa ilman aktiivisten järjes-telmien apua vaaditut 24 tuntia.

Modelling of hydrogen stratification and gas mixing in containment using the APROS code

Hydrogen stratification and atmosphere mixing is a very important phenomenon in nuclear reactor containments when severe accidents are studied and simulated. Hydrogen generation, distribution and accumulation in certain parts of containment may pose a great risk to pressure increase induced by hydrogen combustion, and thus, challenge the integrity of NPP containment. The accurate prediction of hydrogen distribution is important with respect to the safety design of a NPP. Modelling methods typically used for containment analyses include both lumped parameter and field codes. The lumped parameter method is universally used in the containment codes, because its versatility, flexibility and simplicity. The lumped parameter method allows fast, full-scale simulations, where different containment geometries with relevant engineering safety features can be modelled. Lumped parameter gas stratification and mixing modelling methods are presented and discussed in this master’s thesis. Experimental research is widely used in containment analyses. The HM-2 experiment related to hydrogen stratification and mixing conducted at the THAI facility in Germany is calculated with the APROS lump parameter containment package and the APROS 6-equation thermal hydraulic model. The main purpose was to study, whether the convection term included in the momentum conservation equation of the 6-equation modelling gives some remarkable advantages compared to the simplified lumped parameter approach. Finally, a simple containment test case (high steam release to a narrow steam generator room inside a large dry containment) was calculated with both APROS models. In this case, the aim was to determine the extreme containment conditions, where the effect of convection term was supposed to be possibly high. Calculation results showed that both the APROS containment and the 6-equation model could model the hydrogen stratification in the THAI test well, if the vertical nodalisation was dense enough. However, in more complicated cases, the numerical diffusion may distort the results. Calculation of light gas stratification could be probably improved by applying the second order discretisation scheme for the modelling of gas flows. If the gas flows are relatively high, the convection term of the momentum equation is necessary to model the pressure differences between the adjacent nodes reasonably.

User-intimate requirements hierarchy resolution framework (UI-REF)

Abstract. This paper presents the User-Intimate Requirements Hierarchy Resolution Framework (UI-REF) based on earlier work (Badii 1997-2008) to optimise the requirements engineering process particularly to support userintimate interactive systems co-design. The stages of the UI- EF framework for requirements resolution-and-prioritisation are described. UI-REF has been established to ensure that the most-deeply-valued needs of the majority of stakeholders are elicited and ranked, and the root rationale for requirements evolution is trace-able and contextualised so as to help resolve stakeholder conflicts. UI-REF supports the dynamically evolving requirements of the users in the context of digital economy as under-pinned by online service provisioning. Requirements prioritisation in UI-REF is fully resolved while a promotion path for lower priority requirements is delineated so as to ensure that as the requirements evolve so will their resolution and prioritisation.

Situational and Driver Characteristics Associated With Deervehicle Collisions in Southeastern Michigan

Deer-vehicle collisions (DVCs) create societal impacts throughout the range of white-tailed deer (Odocoileus virginanus). In Michigan reported DVCs increased by nearly 60% between 1992-2003, with current estimates at more than 65,000 DVCs per year and a mean of $2,300 vehicle damage. To better understand where to direct education and information programs, we used Office of Highway Safety Planning (OHSP) data, 2001-2003, to profile driver characteristics and accident situations of DVCs in Washtenaw, Oakland, and Monroe Counties in Michigan. Each county varies in intensity of land use, human and deer densities, and available deer habitat. Deer density in Washtenaw, Oakland, and Monroe Counties was 49.5, 21.9 and 8.9 per mi2, respectively, and the annual rate of DVCs in these counties was 5.3, 2.6 and 1.8 per 1,000 licensed drivers. Drivers are at particular risk of being involved in DVCs between 6pm- 6am, which includes dawn and dusk commuting hours, and night. Single lane roads and roads with higher posted speed limits provided greater risk to drivers of involvement in a DVC. Middle-aged drivers, particularly males, were at increased risk deer-related collisions. Results from this study will be combined with survey research to determine how best to educate drivers about risk factors that make occurrence of a DVC more likely.

La strategia BIM a supporto del progetto della sicurezza nel cantiere edile: il caso dell'ospedale di primo soccorso a Lampedusa.

Throughout this research, the whole life cycle of a building will be analyzed, with a special focus on the most common issues that affect the construction sector nowadays, such as safety. In fact, the goal is to enhance the management of the entire construction process in order to reduce the risk of accidents. The contemporary trend is that of researching new tools capable of reducing, or even eliminating, the most common mistakes that usually lead to safety risks. That is one of the main reasons why new technologies and tools have been introduced in the field. The one we will focus on is the so-called BIM: Building Information Modeling. With the term BIM we refer to wider and more complex analysis tool than a simple 3D modeling software. Through BIM technologies we are able to generate a multi-dimension 3D model which contains all the information about the project. This innovative approach aims at a better understanding and control of the project by taking into consideration the entire life cycle and resulting in a faster and more sustainable way of management. Furthermore, BIM software allows for the sharing of all the information among the different aspects of the project and among the different participants involved thus improving the cooperation and communication. In addition, BIM software utilizes smart tools that simulate and visualize the process in advance, thus preventing issues that might not have been taking into consideration during the design process. This leads to higher chances of avoiding risks, delays and cost increases. Using a hospital case study, we will apply this approach for the completion of a safety plan, with a special focus onto the construction phase.

Regret theory-based scenario building using an interacttive process

This paper is an introduction of the regret theory-based scenario building approach combining with a modified Delphi method that uses an interactive process to design and assess four different TDM measures (i.e., cordon toll, parking charge, increased bus frequency and decreased bus fare). The case study of Madrid is used to present the analysis and provide policy recommendations. The new scenario building approach incorporates expert judgement and transport models in an interactive process. It consists of a two-round modified Delphi survey, which was answeared by a group of Spanish transport experts who were the participants of the Transport Engineering Congress (CIT 2012), and an integrated land-use and transport model (LUTI) for Madrid that is called MARS (Metropolitan Activity Relocation Simulator).

A statistical evaluation of the effectiveness of FMVSS 301: Fuel System Integrity. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Develop and test messages to deter drinking and driving.

National Highway Traffic Safety Administration, Washington, D.C.

The Surface Transportation Assistance Act of 1982: comparative economic effects on the trucking industry. Comptroller General's report to the Committee on Finance, United States Senate.

Mode of access: Internet.

Impact of motorcycle helmet usage in Colorado : final report /

September 1978.

Injury scaling research. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

An examination of the effects of the lowered maximum speed limit and fuel shortages in North Carolina. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Vehicle handling and stability.

Mode of access: Internet.