Supramolecular order and dynamics of discotic materials studied by solid-state NMR recoupling methods

The topic of this thesis is the investigation of structure,order and dynamics in discotic mesogens by advancedsolid-state NMR spectroscopy. Most of the discotic mesogensunder investigation are hexa-peri-hexabenzocoronene (HBC)derivatives which are of particular interest for potentialdevice applications due to their high one-dimensional chargecarrier mobilities. The supramolecular stacking arrangement of the discoticcores was investigated by 2D 1H-1H double-quantum (DQ)methods, which were modified by incorporating the WATERGATEsuppression technique into the experiments in order toovercome severe phase problems arising from the strongsignal of the long alkyl sidechains. Molecular dynamics and sample orientation was probed throughthe generation of sideband patterns by reconversion rotorencoding in 2D recoupling experiments. These experimentswere extended by new recoupling schemes to enable thedistinction of motion and orientation effects. The solid-state NMR studies presented in this work aim tothe understanding of structure-property relationships in theinvestigated discotic materials, while the experimentsapplied to these materials include new recoupling schemeswhich make the desired information on molecular orientationand dynamics accessible without isotope labelling.

Statistical methods for analysis and processing of medical ultrasound: applications to segmentation and restoration

In this thesis two major topics inherent with medical ultrasound images are addressed: deconvolution and segmentation. In the first case a deconvolution algorithm is described allowing statistically consistent maximum a posteriori estimates of the tissue reflectivity to be restored. These estimates are proven to provide a reliable source of information for achieving an accurate characterization of biological tissues through the ultrasound echo. The second topic involves the definition of a semi automatic algorithm for myocardium segmentation in 2D echocardiographic images. The results show that the proposed method can reduce inter- and intra observer variability in myocardial contours delineation and is feasible and accurate even on clinical data.

Untersuchung der Pigment- und Proteinzusammensetzung der peripheren Lichtsammelantenne des Photosystem I

Die Lichtsammelantenne des PSI (LHCI) ist hinsichtlich ihrer Protein- und Pigmentzusammensetzung weniger gut untersucht als die des PSII. Im Rahmen dieser Arbeit wurde deshalb zunächst die Isolation von nativen LHCI-Subkomplexen optimiert und deren Pigmentzusammensetzung untersucht. Zusätzlich wurde die Pigmentbindung analysiert sowie das Pigment/Protein-Verhältnis bestimmt. Die Analyse der Proteinzusammensetzung des LHCI erfolgte mittels einer Kombination aus ein- oder zweidimensionaler Gelelektrophorese mit Westernblotanalysen mit Lhca-Protein-spezifischen Antikörpern und massenspektrometrischen Untersuchungen. Dabei stellte sich heraus, dass der LHCI mehr Proteine bzw. Proteinisoformen enthält als bisher vermutet. So gelang durch die massenspektrometrischen Untersuchungen die Identifizierung zweier bisher noch nicht nachgewiesener Lhca-Proteine. Bei diesen handelt es sich um eine Isoform des Lhca4 und ein zusätzliches Lhca-Protein, das Tomaten-Homolog des Lhca5 von Arabidopsis thaliana. Außerdem wurden in 1D-Gelen Isoformen von Lhca-Proteinen mit unterschiedlichem elektrophoretischen Verhalten beobachtet. In 2D-Gelen trat zusätzlich eine große Anzahl an Isoformen mit unterschiedlichen isoelektrischen Punkten auf. Es ist zu vermuten, dass zumindest ein Teil dieser Isoformen physiologischen Ursprungs ist, und z.B. durch differentielle Prozessierung oder posttranslationale Modifikationen verursacht wird, wenn auch die Spotvielfalt in 2D-Gelen wohl eher auf die Probenaufbereitung zurückzuführen ist. Mittels in vitro-Rekonstitution mit anschließenden biochemischen Untersuchungen und Fluoreszenzmessungen wurde nachgewiesen, dass Lhca5 ein funktioneller LHC mit spezifischen Pigmentbindungseigenschaften ist. Außerdem zeigten in vitro-Dimerisierungsexperimente eine Interaktion zwischen Lhca1 und Lhca5, wodurch dessen Zugehörigkeit zur Antenne des PSI gestützt wird. In vitro-Dimerisierungsexperimente mit Lhca2 und Lhca3 führten dagegen nicht zur Bildung von Dimeren. Dies zeigt, dass die Interaktion in potentiellen Homo- oder Heterodimeren aus Lhca2 und/oder Lhca3 schwächer ist als die zwischen Lhca1 und Lhca4 oder Lhca5. Die beobachtete Proteinheterogenität deutet daraufhin, dass die Antenne des PSI eine komplexere Zusammensetzung hat als bisher angenommen. Für die Integration „neuer“ LHC in den PSI-LHCI-Holokomplex werden zwei Modelle vorgeschlagen: geht man von einer festen Anzahl von LHCI-Monomeren aus, so kann sie durch den Austausch einzelner LHC-Monomere erreicht werden. Als zweites Szenario ist die Bindung zusätzlicher LHC vorstellbar, die entweder indirekt über bereits vorhandene LHC oder direkt über PSI-Kernuntereinheiten mit dem PSI interagieren. In Hinblick auf die Pigmentbindung der nativen LHCI-Subfraktionen konnte gezeigt werden, dass sie Pigmente in einer spezifischen Stöchiometrie und Anzahl binden, und sich vom LHCIIb vor allem durch eine verstärkte Bindung von Chlorophyll a, eine geringere Anzahl von Carotinoiden und die Bindung von ß-Carotin an Stelle von Neoxanthin unterscheiden. Der Vergleich von nativem LHCI mit rekonstituierten Lhca-Proteinen ergab, dass Lhca-Proteine Pigmente in einer spezifischen Stöchiometrie binden, und dass sie Carotinoidbindungsstellen mit flexiblen Bindungseigenschaften besitzen. Auch über die Umwandlung des an die einzelnen Lhca-Proteine gebundenen Violaxanthins (Vio) im Xanthophyllzyklus war nur wenig bekannt. Deshalb wurden mit Hilfe eines in vitro-Deepoxidationssystems sowohl native als auch rekonstituierte LHCI hinsichtlich ihrer Deepoxidationseigenschaften untersucht und der Deepoxidationsgrad von in vivo deepoxidierten Pigment-Protein-Komplexen bestimmt. Aus den Deepoxidationsexperimenten konnte abgeleitet werden, dass in den verschiedenen Lhca-Proteinen unterschiedliche Carotinoidbindungsstellen besetzt sind. Außerdem bestätigten diese Experimente, dass der Xanthophyllzyklus auch im LHCI auftritt, wobei jedoch ein niedrigerer Deepoxidationsgrad erreicht wird als bei LHCII. Dies konnte durch in vitro-Deepoxidationsversuchen auf eine geringere Deepoxidierbarkeit des von Lhca1 und Lhca2 gebundenen Vio zurückgeführt werden. Damit scheint Vio in diesen Lhca-Proteinen eher eine strukturelle Rolle zu übernehmen. Eine photoprotektive Funktion von Zeaxanthin im PSI wäre folglich auf Lhca3 und Lhca4 beschränkt. Damit enthält jede LHCI-Subfraktion ein LHC-Monomer mit langwelliger Fluoreszenz, das möglicherweise am Lichtschutz beteiligt ist. Insgesamt zeigten die Untersuchungen der Pigmentbindung, der Deepoxidierung und der Fluoreszenzeigenschaften, dass sich die verschiedenen Lhca-Proteine in einem oder mehreren dieser Parameter unterscheiden. Dies lässt vermuten, dass schon durch leichte Veränderungen in der Proteinzusammensetzung des LHCI eine Anpassung an unterschiedliche Licht-verhältnisse erreicht werden kann.

Numerical models of trench migration for lateral heterogeneous subducting plates

The aim of this Thesis is to investigate the effect of heterogeneities within the subducting plate on the dynamics of subduction. In particular, I study the motion of the trench for oceanic and continental subduction, first, separately, and, then, together in the same system to understand how they interact. The understanding of these features is fundamental to reconstruct the evolution of complex subduction zones, such as the Central Mediterranean. For this purpose, I developed 2D and 3D numerical models of oceanic and continental subduction where the rheological, geometrical and compositional properties of the plates are varied. In these models, the trench and the overriding plate move self-consistently as a function of the dynamics of the system. The effect of continental subduction on trench migration is largely investigated. Results from a parametric study showed that despite different rheological properties of the plates, all models with a uniform continental crust share the same kinematic behaviour: the trench starts to advance once the continent arrives at the subduction zone. Hence, the advancing mode in continental collision scenarios is at least partly driven by an intrinsic feature of the system. Moreover, the presence of a weak lower crust within the continental plate can lead to the occurrence of delamination. Indeed, by changing the viscosity of the lower crust, both delamination and slab detachment can occur. Delamination is favoured by a low viscosity value of the lower crust, because this makes the mechanical decoupling easier between crust and lithospheric mantle. These features are observed both in 2D and 3D models, but the numerical results of the 3D models also showed that the rheology of the continental crust has a very strong effect on the dynamics of the whole system, since it influences not only the continental part of plate but also the oceanic sides.

Convertitori di potenza multi-sorgente per applicazioni di energy harvesting

L’obiettivo di questa tesi è stato lo svilippo di un convertitore di potenza per applicazioni di energy harvesting in grado di convogliare l’energia estratta da diversi tipi di trasduttori di grandezze ambientali in un unico dispositivo di storage, ad es. un condensatore, utilizzabile per alimentare circuiti a basso consumo. L’idea di base è stata quella di ottimizzare il trasferimento di energia, attraverso una rete logica in grado di gestire le priorità di conversione dalle diverse tipologie di sorgenti e grazie ad una implementazione di un algoritmo di Maximum Power Point Tracking. In base alle specifiche di progetto, in una prima fase è stata sviluppata la rete a livello funzionale, poi sono stati scelti i componenti più opportuni ed infine si è verificato il funzionamento attraverso simulazioni circuitali.

Design, synthesis and application of ultrastable rylene dyes for fluorescent labeling of biomolecules

Studies of organic fluorescent dyes are experiencing a renaissance related to the increasing demands posed by new microscopy techniques for high resolution and high sensitivity. While in the last decade single molecule equipment and methodology has significantly advanced and in some cases reached theoretical limits (e.g. detectors approaching unity quantum yields) unstable emission from chromophores and photobleaching become more and more the bottleneck of the advancement and spreading of single-molecule fluorescence studies. The main goal of this work was the synthesis of fluorophores that are water-soluble, highly fluorescent in an aqueous environment, have a reactive group for attachment to a biomolecule and posses exceptional photostability. An approach towards highly fluorescent, water-soluble and monofunctional perylene-3,4,9,10-tetracarboxdiimide and terrylene-3,4:11,12-tetra carboxidiimide chromophores was presented. A new synthetic strategy for the desymmetrization of perylenetetracarboximides was elaborated; water-solubility was accomplished by introducing sulfonyl substituents in the phenoxy ring. Two strategies have been followed relying on either non-specific or site specific labeling. For this purpose a series of new water-soluble monofunctional perylene and terrylene dyes, bearing amine or carboxy group were prepared. The reactivity and photophysical properties of these new chromophores were studied in aqueous medium. The most suitable chromophores were further derivatized with amine or thiol reactive groups, suitable for chemical modification of proteins. The performance of the new fluorescent probes was assessed by single molecule enzyme tracking, in this case phospholipase acting on phospholipid supported layers. Phospholipase-1 (PLA-1) was labeled with N-hydroxysuccinimide ester functionalized perylene and terrylene derivatives. The purification of the conjugates was accomplished by novel convenient procedure for the removal of unreacted dye from labeled enzymes, which involves capturing excess dye with a solid support. This novel strategy for purification of bioconjugates allows convenient and fast separation of labeled proteins without the need for performing time consuming chromatographic or electrophoretic purification steps. The outstanding photostability of the dyes and, associated therewith, the extended survival times under strong illumination conditions allow a complete characterization of enzyme action on its natural substrates and even connecting enzyme mobility to catalytic activity. For site-specific attachment of the rylene dyes to proteins the chromophores were functionalized with thioesters or nitrilotriacetic acid groups. This allowed attachment of the emitters to the N-terminus of proteins by native chemical ligation or complexation with His-tagged polypeptides at the N- or C-termini, respectively. The synthesis of a water-soluble perylenebis (dicarboximide) functionalized with a thioester group was presented. This chromophore exhibits an exceptional photostability and a functional unit for site-specific labeling of proteins. The suitability of the fluorophore as a covalent label was demonstrated via native chemical ligation with protein containing N-terminal cystein residue. We exploited also oligohisitidine sequences as recognition elements for site-selective labeling. The synthesis of a new water-soluble perylene chromophore, containing a nitrilotriacetic acid functional group was demonstrated, using solution-phase and solid-phase approaches. This chromophore combines the exceptional photophysical properties of the rylene dyes and a recognition unit for site-specific labeling of proteins. An important feature of the label is the unchanged emission of the dye upon complexation with nickel ions.

Effect of mixing, particle interaction, and spatial dimension on the glass transition

In this thesis, the influence of composition changes on the glass transition behavior of binary liquids in two and three spatial dimensions (2D/3D) is studied in the framework of mode-coupling theory (MCT).The well-established MCT equations are generalized to isotropic and homogeneous multicomponent liquids in arbitrary spatial dimensions. Furthermore, a new method is introduced which allows a fast and precise determination of special properties of glass transition lines. The new equations are then applied to the following model systems: binary mixtures of hard disks/spheres in 2D/3D, binary mixtures of dipolar point particles in 2D, and binary mixtures of dipolar hard disks in 2D. Some general features of the glass transition lines are also discussed. The direct comparison of the binary hard disk/sphere models in 2D/3D shows similar qualitative behavior. Particularly, for binary mixtures of hard disks in 2D the same four so-called mixing effects are identified as have been found before by Götze and Voigtmann for binary hard spheres in 3D [Phys. Rev. E 67, 021502 (2003)]. For instance, depending on the size disparity, adding a second component to a one-component liquid may lead to a stabilization of either the liquid or the glassy state. The MCT results for the 2D system are on a qualitative level in agreement with available computer simulation data. Furthermore, the glass transition diagram found for binary hard disks in 2D strongly resembles the corresponding random close packing diagram. Concerning dipolar systems, it is demonstrated that the experimental system of König et al. [Eur. Phys. J. E 18, 287 (2005)] is well described by binary point dipoles in 2D through a comparison between the experimental partial structure factors and those from computer simulations. For such mixtures of point particles it is demonstrated that MCT predicts always a plasticization effect, i.e. a stabilization of the liquid state due to mixing, in contrast to binary hard disks in 2D or binary hard spheres in 3D. It is demonstrated that the predicted plasticization effect is in qualitative agreement with experimental results. Finally, a glass transition diagram for binary mixtures of dipolar hard disks in 2D is calculated. These results demonstrate that at higher packing fractions there is a competition between the mixing effects occurring for binary hard disks in 2D and those for binary point dipoles in 2D.

La valutazione della sicurezza delle strade esistenti: Il contributo del mobile eye detector.

L’incidente stradale è la conseguenza di uno o più errori all'interno di un sistema complesso, in cui l'uomo rappresenta la principale causa d’incidentalità. Spesso ciò che può apparire a una prima analisi un errore dell’utente, in realtà può essere collegato a problemi di progettazione e gestione dell’infrastruttura. Per massimizzare i risultati nel campo della sicurezza stradale, occorre valutare il “sistema strada” in ogni suo elemento. Per raggiungere questi obiettivi le analisi di sicurezza giocano un ruolo fondamentale. Il Road Safety Review consente di individuare nel tracciato la presenza di situazioni di rischio, in modo tale da eliminarli o attenuarli prima che diano luogo ad incidenti. Il Ministero delle Infrastrutture e dei Trasporti ha emanato le "Linee guida per la gestione della sicurezza delle infrastrutture stradali". Secondo queste Linee Guida l'uomo detiene un ruolo centrale nel sistema. L'uomo deve adattare il suo comportamento, in funzione del veicolo condotto e delle condizioni ambientali. Diventa indispensabile integrare le analisi di sicurezza con il fattore uomo. Obiettivo della tesi è analizzare la sicurezza di un’infrastruttura viaria esistente integrando i risultati ottenuti dal Road Safety Review con metodologie innovative che tengano conto del comportamento degli utenti durante la guida. È stata realizzata una sperimentazione in sito che ha coinvolto un campione formato da 6 soggetti. Ognuno di essi ha percorso il tronco stradale, della SP26 "Valle del Lavino", in provincia di Bologna. La strada, richiede interventi di adeguamento e messa in sicurezza poiché risulta la terza tratta stradale a maggior costo sociale di tutta la rete provinciale. La sperimentazione ha previsto due fasi: la prima, in cui è stato condotto il Road Safety Review . La seconda, in cui ogni soggetto ha guidato lungo il tronco stradale, indossando il Mobile Eye-XG, un'innovativa strumentazione eye tracking in grado di tracciare l’occhio umano e i suoi movimenti.

Web-Usability aus linguistischer und formaler Sicht : am Beispiel von universitären Websites

Ein Tag ohne Internet ist für viele kaum vorstellbar. Das Spektrum der Internetnutzer ist breiter geworden und damit sind die Ansprüche an die Websites massiv angestiegen. Die Entscheidung auf einer Website zu bleiben oder auf einer anderen zu suchen fällt innerhalb von wenigen Sekunden. Diese Entscheidung ist sowohl vom Website-Design als auch von dem dargestellten Inhalt abhängig. Die Auswertung, wie schnell der Benutzer Online-Informationen finden und wie einfach er sie verstehen kann, ist die Aufgabe von Web-Usability-Testing. Für das Finden und Verstehen von Informationen sind die computertechnischen zusammen mit den linguistischen Aspekten zuständig. In der Usability-Forschung liegt jedoch der Fokus bislang weitgehend auf der Bewertung der computer¬linguistischen und ästhetischen Aspekte der Websites. In den Hintergrund gedrängt wurden dabei die linguistischen Aspekte. Im Vergleich sind diese weniger systematisch erforscht und in Usability-Richtlinien kaum zu finden. Stattdessen stößt man überwiegend auf allgemeine Empfehlungen. Motiviert davon hat die vorliegende Arbeit das Ziel, Die Web-Usability systematisch sowohl aus linguistischer als auch aus formaler Sicht zu erforschen. Auf linguistischer Ebene wurde in Anlehnung an die Zeichentheorie von Morris die Web-Usability analysiert und der Begriff Linguistische Web-Usability eingeführt. Auf Basis dieser Analyse sowie einer literaturstudie ‘literature review’ mehrerer Usability-Richtlinien wurde ein Kriterienkatalog entwickelt. Bei der Umsetzung dieses Kriterienkatalogs im Rahmen einer Usability-Studie wurde die Website der Universität Johannes Gutenberg-Universität Mainz (JGU) im Usability-Labor unter Anwendung der Methode Eye-Tracking zusammen mit der Think-Aloud-Methode und der Retrospective-Think-Aloud-Methode getestet. Die empirischen Ergebnisse zeigen, dass die linguistischen Usability-Probleme genau wie die formalen die Benutzer hindern, die gesuchten Informationen zu finden, oder zumindest ihre Suche verlangsamen. Dementsprechend sollten die linguistischen Perspektiven in die Usability-Richtlinien miteinbezogen werden.

Enhanced Sensitivity by Nonuniform Sampling Enables Multidimensional MAS NMR Spectroscopy of Protein Assemblies

We report dramatic sensitivity enhancements in multidimensional MAS NMR spectra by the use of nonuniform sampling (NUS) and introduce maximum entropy interpolation (MINT) processing that assures the linearity between the time and frequency domains of the NUS acquired data sets. A systematic analysis of sensitivity and resolution in 2D and 3D NUS spectra reveals that with NUS, at least 1.5- to 2-fold sensitivity enhancement can be attained in each indirect dimension without compromising the spectral resolution. These enhancements are similar to or higher than those attained by the newest-generation commercial cryogenic probes. We explore the benefits of this NUS/MaxEnt approach in proteins and protein assemblies using 1-73-(U-C-13,N-15)/74-108-(U-N-15) Escherichia coil thioredoxin reassembly. We demonstrate that in thioredoxin reassembly, NUS permits acquisition of high-quality 3D-NCACX spectra, which are inaccessible with conventional sampling due to prohibitively long experiment times. Of critical importance, issues that hinder NUS-based SNR enhancement in 3D-NMR of liquids are mitigated in the study of solid samples in which theoretical enhancements on the order of 3-4 fold are accessible by compounding the NUS-based SNR enhancement of each indirect dimension. NUS/MINT is anticipated to be widely applicable and advantageous for multidimensional heteronuclear MAS NMR spectroscopy of proteins, protein assemblies, and other biological systems.

The Modified Direct Analysis Method: an Extension of the Direct Analysis Method

The purpose of this research project is to study an innovative method for the stability assessment of structural steel systems, namely the Modified Direct Analysis Method (MDM). This method is intended to simplify an existing design method, the Direct Analysis Method (DM), by assuming a sophisticated second-order elastic structural analysis will be employed that can account for member and system instability, and thereby allow the design process to be reduced to confirming the capacity of member cross-sections. This last check can be easily completed by substituting an effective length of KL = 0 into existing member design equations. This simplification will be particularly useful for structural systems in which it is not clear how to define the member slenderness L/r when the laterally unbraced length L is not apparent, such as arches and the compression chord of an unbraced truss. To study the feasibility and accuracy of this new method, a set of 12 benchmark steel structural systems previously designed and analyzed by former Bucknell graduate student Jose Martinez-Garcia and a single column were modeled and analyzed using the nonlinear structural analysis software MASTAN2. A series of Matlab-based programs were prepared by the author to provide the code checking requirements for investigating the MDM. By comparing MDM and DM results against the more advanced distributed plasticity analysis results, it is concluded that the stability of structural systems can be adequately assessed in most cases using MDM, and that MDM often appears to be a more accurate but less conservative method in assessing stability.

Efficiency of arthroscopic lysis and lavage for internal derangement of the temporomandibular joint correlated with Wilkes classification

OBJECTIVES: To compare the outcome of arthroscopic lysis and lavage of TMJ with internal derangement of Wilkes stages II, III, IV, and V. STUDY DESIGN: Arthroscopic lysis and lavage was performed in 45 TMJ of 39 patients with internal derangement. The cases were divided into 4 groups corresponding to Wilkes stages II, III, IV, and V. Two parameters were compared pre- and postoperatively: pain and mouth opening. Statistical significance was determined using the chi(2) test. RESULTS: Overall success rate was 86.7% (Wilkes stage II 90.9%, Wilkes stage III 92.3%, Wilkes stage IV 84.6%, Wilkes stage V 75%). There were no statistically significant differences between the success rates for Wilkes stages II, III, IV, and V. CONCLUSION: Arthroscopic lysis and lavage should be performed as a standard operation for internal derangement of the TMJ after failure of conservative treatment in all Wilkes stages.

Use of a 3D perfusion bioreactor with osteoblasts and osteoblast/endothelial cell co-cultures to improve tissue-engineered bone

The delivery of oxygen, nutrients, and the removal of waste are essential for cellular survival. Culture systems for 3D bone tissue engineering have addressed this issue by utilizing perfusion flow bioreactors that stimulate osteogenic activity through the delivery of oxygen and nutrients by low-shear fluid flow. It is also well established that bone responds to mechanical stimulation, but may desensitize under continuous loading. While perfusion flow and mechanical stimulation are used to increase cellular survival in vitro, 3D tissue-engineered constructs face additional limitations upon in vivo implantation. As it requires significant amounts of time for vascular infiltration by the host, implants are subject to an increased risk of necrosis. One solution is to introduce tissue-engineered bone that has been pre-vascularized through the co-culture of osteoblasts and endothelial cells on 3D constructs. It is unclear from previous studies: 1) how 3D bone tissue constructs will respond to partitioned mechanical stimulation, 2) how gene expression compares in 2D and in 3D, 3) how co-cultures will affect osteoblast activity, and 4) how perfusion flow will affect co-cultures of osteoblasts and endothelial cells. We have used an integrated approach to address these questions by utilizing mechanical stimulation, perfusion flow, and a co-culture technique to increase the success of 3D bone tissue engineering. We measured gene expression of several osteogenic and angiogenic genes in both 2D and 3D (static culture and mechanical stimulation), as well as in 3D cultures subjected to perfusion flow, mechanical stimulation and partitioned mechanical stimulation. Finally, we co-cultured osteoblasts and endothelial cells on 3D scaffolds and subjected them to long-term incubation in either static culture or under perfusion flow to determine changes in gene expression as well as histological measures of osteogenic and angiogenic activity. We discovered that 2D and 3D osteoblast cultures react differently to shear stress, and that partitioning mechanical stimulation does not affect gene expression in our model. Furthermore, our results suggest that perfusion flow may rescue 3D tissue-engineered constructs from hypoxic-like conditions by reducing hypoxia-specific gene expression and increasing histological indices of both osteogenic and angiogenic activity. Future research to elucidate the mechanisms behind these results may contribute to a more mature bone-like structure that integrates more quickly into host tissue, increasing the potential of bone tissue engineering.

Remote sensing of volcanic plumes using the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER).

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) has been used to quantify SO2 emissions from passively degassing volcanoes. This dissertation explores ASTER’s capability to detect SO2 with satellite validation, enhancement techniques and extensive processing of images at a variety of volcanoes. ASTER is compared to the Mini UV Spectrometer (MUSe), a ground based instrument, to determine if reasonable SO2 fluxes can be quantified from a plume emitted from Lascar, Chile. The two sensors were in good agreement with ASTER proving to be a reliable detector of SO2. ASTER illustrated the advantages of imaging a plume in 2D, with better temporal resolution than the MUSe. SO2 plumes in ASTER imagery are not always discernible in the raw TIR data. Principal Component Analysis (PCA) and Decorrelation Stretch (DCS) enhancement techniques were compared to determine how well they highlight a variety of volcanic plumes. DCS produced a consistent output and the composition of the plumes was easy to identify from explosive eruptions. As the plumes became smaller and lower in altitude they became harder to distinguish using DCS. PCA proved to be better at identifying smaller low altitude plumes. ASTER was used to investigate SO2 emissions at Lascar, Chile. Activity at Lascar has been characterized by cyclic behavior and persistent degassing (Matthews et al. 1997). Previous studies at Lascar have primarily focused on changes in thermal infrared anomalies, neglecting gas emissions. Using the SO2 data along with changes in thermal anomalies and visual observations it is evident that Lascar is at the end an eruptive cycle that began in 1993. Declining gas emissions and crater temperatures suggest that the conduit is sealing. ASTER and the Ozone Monitoring Instrument (OMI) were used to determine the annual contribution of SO2 to the troposphere from the Central and South American volcanic arcs between 2000 and 2011. Fluxes of 3.4 Tg/a for Central America and 3.7 Tg/a for South America were calculated. The detection limits of ASTER were explored. The results a proved to be interesting, with plumes from many of the high emitting volcanoes, such as Villarrica, Chile, not being detected by ASTER.

NHERF1 – New Modifier of Colorectal Cancer Progression

Colorectal cancer (CRC) develops from multiple progressive modifications of normal intestinal epithelium into adenocarcinoma. Loss of cell polarity has been implicated as an early event in this process, but the molecular players involved are not well known. NHERF1 (Na+/H+ Exchanger Regulatory Factor 1) is an adaptor protein with apical membrane localization in polarized epithelia. In this study, we tested our hypothesis that NHERF1 plays a role in CRC. We examined surgical CRC resection specimens for changes in NHERF1 expression, and modeled these changes in two- and three-dimensional (2D and 3D) Caco-2 CRC cell systems. NHERF1 had significant alterations from normal to adenoma and carcinoma transitions (2=38.5, d.f.=4, P<0.001), displaying apical membrane localization in normal tissue but loss of expression in adenoma and ectopic overexpression in carcinoma. In Caco-2 cell models, NHERF1 depletion induced epithelial-mesenchymal-transition in 2D cell monolayers and disruption of apical-basal polarity in 3D cyst system. The mesenchymal phenotype of NHERF1-depleted cells was fully restored by re-expression of NHERF1 at the apical membrane. Cytoplasmic and nuclear NHERF1 re-expression not only failed to restore the epithelial phenotype but led to more aggressive phenotypes. Our findings suggest that membrane NHERF1 is an important regulator of epithelial morphogenesis, and that changes in NHERF1 expression correlate with CRC progression. NHERF1 loss and ectopic expression that induce massive disruption of epithelial cell polarity may, thereby, mark important steps in CRC development.