Fault Tolerant Error Coding and Detection using Reversible Gates

In recent years, reversible logic has emerged as one of the most important approaches for power optimization with its application in low power CMOS, quantum computing and nanotechnology. Low power circuits implemented using reversible logic that provides single error correction – double error detection (SEC-DED) is proposed in this paper. The design is done using a new 4 x 4 reversible gate called ‘HCG’ for implementing hamming error coding and detection circuits. A parity preserving HCG (PPHCG) that preserves the input parity at the output bits is used for achieving fault tolerance for the hamming error coding and detection circuits.

Refractive error, cognitive demand and nearwork-induced transient myopia

Purpose. Whereas many previous studies have identified the association between sustained near work and myopia, few have assessed the influence of concomitant levels of cognitive effort. This study investigates the effect of cognitive effort on near-work induced transient myopia (NITM). Methods. Subjects comprised of six early onset myopes (EOM; mean age 23.7 yrs; mean onset 10.8 yrs), six late-onset myopes (LOM; mean age 23.2 yrs; mean onset 20.0 yrs) and six emmetropes (EMM; mean age 23.8 yrs). Dynamic, monocular, ocular accommodation was measured with the Shin-Nippon SRW-5000 autorefractor. Subjects engaged passively or actively in a 5 minute arithmetic sum checking task presented monocularly on an LCD monitor via a Badal optical system. In all conditions the task was initially located at near (4.50 D) and immediately following the task instantaneously changed to far (0.00 D) for a further 5 minutes. The combinations of active (A) and passive (P) cognition were randomly allocated as P:P; A:P; A:A; P:A. Results. For the initial near task, LOMs were shown to have a significantly less accurate accommodative response than either EOMs or EMMs (p < 0.001). For the far task, post hoc analyses for refraction identified EOMs as demonstrating significant NITM compared to LOMs (p < 0.05), who in turn showed greater NITM than EMMs (p < 0.001). The data show that for EOMs the level of cognitive activity operating during the near and far tasks determines the persistence of NITM; persistence being maximal when active cognition at near is followed by passive cognition at far. Conclusions. Compared with EMMs, EOMs and LOMs are particularly susceptible to NITM such that sustained near vision reduces subsequent accommodative accuracy for far vision. It is speculated that the marked NITM found in EOM may be a consequence of the crystalline lens thinning shown to be a developmental feature of EOM. Whereas the role of small amounts of retinal defocus in myopigenesis remains equivocal, the results show that account needs to be taken of cognitive demand in assessing phenomena such as NITM.

Micro-Fabricated Surface Trap and Cavity Integration for Trapped Ion Quantum Computing

Atomic ions trapped in micro-fabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable qualities of such a device, including high fidelity state preparation and readout, universal logic gates, long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas of their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small micro-cavities formed from laser ablated fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photonic entanglement rate up to 10 kHz, the qubit measurement time down to 1 microsecond, and the measurement error rates down to the 10e-5 range. The final part of this thesis details a performance simulator for exploring the physical resource requirements and performance demands to scale such a quantum computer to sizes capable of performing quantum algorithms beyond the limits of classical computation.

Phase correction for passive radar using targets of opportunity

This paper presents a novel phase correction technique for Passive Radar which uses targets of opportunity present in the target area as references. The proposed methodology is quite simple and enables the use of low cost hardware with independent oscillators for the reference and surveillance channels which can be geographically distributed. © 2014 IEEE.

Enhanced radar precipitation estimates using a combined clutter and beam blockage correction technique

Weather radar observations are currently the most reliable method for remote sensing of precipitation. However, a number of factors affect the quality of radar observations and may limit seriously automated quantitative applications of radar precipitation estimates such as those required in Numerical Weather Prediction (NWP) data assimilation or in hydrological models. In this paper, a technique to correct two different problems typically present in radar data is presented and evaluated. The aspects dealt with are non-precipitating echoes - caused either by permanent ground clutter or by anomalous propagation of the radar beam (anaprop echoes) - and also topographical beam blockage. The correction technique is based in the computation of realistic beam propagation trajectories based upon recent radiosonde observations instead of assuming standard radio propagation conditions. The correction consists of three different steps: 1) calculation of a Dynamic Elevation Map which provides the minimum clutter-free antenna elevation for each pixel within the radar coverage; 2) correction for residual anaprop, checking the vertical reflectivity gradients within the radar volume; and 3) topographical beam blockage estimation and correction using a geometric optics approach. The technique is evaluated with four case studies in the region of the Po Valley (N Italy) using a C-band Doppler radar and a network of raingauges providing hourly precipitation measurements. The case studies cover different seasons, different radio propagation conditions and also stratiform and convective precipitation type events. After applying the proposed correction, a comparison of the radar precipitation estimates with raingauges indicates a general reduction in both the root mean squared error and the fractional error variance indicating the efficiency and robustness of the procedure. Moreover, the technique presented is not computationally expensive so it seems well suited to be implemented in an operational environment.

Market Index Biases and Minimum Risk Indices

Markets, in the real world, are not efficient zero-sum games where hypotheses of the CAPM are fulfilled. Then, it is easy to conclude the market portfolio is not located on Markowitz"s efficient frontier, and passive investments (and indexing) are not optimal but biased. In this paper, we define and analyze biases suffered by passive investors: the sample, construction, efficiency and active biases and tracking error are presented. We propose Minimum Risk Indices (MRI) as an alternative to deal with to market index biases, and to provide investors with portfolios closer to the efficient frontier, that is, more optimal investment possibilities. MRI (using a Parametric Value-at-Risk Minimization approach) are calculated for three stock markets achieving interesting results. Our indices are less risky and more profitable than current Market Indices in the Argentinean and Spanish markets, facing that way the Efficient Market Hypothesis. Two innovations must be outlined: an error dimension has been included in the backtesting and the Sharpe"s Ratio has been used to select the"best" MRI

Market Index Biases and Minimum Risk Indices

Markets, in the real world, are not efficient zero-sum games where hypotheses of the CAPM are fulfilled. Then, it is easy to conclude the market portfolio is not located on Markowitz"s efficient frontier, and passive investments (and indexing) are not optimal but biased. In this paper, we define and analyze biases suffered by passive investors: the sample, construction, efficiency and active biases and tracking error are presented. We propose Minimum Risk Indices (MRI) as an alternative to deal with to market index biases, and to provide investors with portfolios closer to the efficient frontier, that is, more optimal investment possibilities. MRI (using a Parametric Value-at-Risk Minimization approach) are calculated for three stock markets achieving interesting results. Our indices are less risky and more profitable than current Market Indices in the Argentinean and Spanish markets, facing that way the Efficient Market Hypothesis. Two innovations must be outlined: an error dimension has been included in the backtesting and the Sharpe"s Ratio has been used to select the"best" MRI

Probing quantum gravity using photons from a flare of the active galactic nucleus Markarian 501 observed by the MAGIC telescope

We analyze the timing of photons observed by the MAGIC telescope during a flare of the active galactic nucleus Mkn 501 for a possible correlation with energy, as suggested by some models of quantum gravity (QG), which predict a vacuum refractive index similar or equal to 1 + (E/M-QGn)(n), n = 1, 2. Parametrizing the delay between gamma-rays of different energies as Delta t = +/-tau E-1 or Delta t = +/-tau E-q(2), we find tau(1) = (0.030 +/- 0.012) s/GeV at the 2.5-sigma level, and tau(q) = (3.71 +/- 2.57) x 10(-6) s/GeV2, respectively. We use these results to establish lower limits M-QG1 > 0.21 X 10(18) GeV and M-QG2 > 0.26 x 10(11) GeV at the 95% C.L. Monte Carlo studies confirm the MAGIC sensitivity to propagation effects at these levels. Thermal plasma effects in the source are negligible, but we cannot exclude the importance of some other source effect.

Quand l’action surpasse la perception : rôle de la vision et de la proprioception dans la perception et le contrôle en temps réel de l’orientation spatiale de la main

Cette recherche a pour but d’évaluer le rôle de la vision et de la proprioception pour la perception et le contrôle de l’orientation spatiale de la main chez l’humain. L’orientation spatiale de la main est une composante importante des mouvements d’atteinte et de saisie. Toutefois, peu d’attention a été portée à l’étude de l’orientation spatiale de la main dans la littérature. À notre connaissance, cette étude est la première à évaluer spécifiquement l’influence des informations sensorielles et de l’expérience visuelle pour la perception et le contrôle en temps réel de l'orientation spatiale de la main pendant le mouvement d’atteinte naturel vers une cible stationnaire. Le premier objectif était d’étudier la contribution de la vision et de la proprioception dans des tâches de perception et de mouvement d’orientation de la main. Dans la tâche de perception (orientation-matching task), les sujets devaient passivement ou activement aligner une poignée de forme rectangulaire avec une cible fixée dans différentes orientations. Les rotations de l’avant-bras et du poignet étaient soit imposées par l’expérimentateur, soit effectuées par les sujets. Dans la tâche de mouvement d’orientation et d’atteinte simultanées (letter posting task 1), les sujets ont réalisé des mouvements d’atteinte et de rotation simultanées de la main afin d’insérer la poignée rectangulaire dans une fente fixée dans les mêmes orientations. Les tâches ont été réalisées dans différentes conditions sensorielles où l’information visuelle de la cible et de la main était manipulée. Dans la tâche perceptive, une augmentation des erreurs d’orientation de la main a été observée avec le retrait des informations visuelles concernant la cible et/ou ou la main. Lorsque la vision de la main n’était pas permise, il a généralement été observé que les erreurs d’orientation de la main augmentaient avec le degré de rotation nécessaire pour aligner la main et la cible. Dans la tâche de mouvement d’orientation et d’atteinte simultanées, les erreurs ont également augmenté avec le retrait des informations visuelles. Toutefois, les patrons d’erreurs étaient différents de ceux observés dans la tâche de perception, et les erreurs d’orientation n’ont pas augmenté avec le degré de rotation nécessaire pour insérer la poignée dans la fente. En absence de vision de la main, il a été observé que les erreurs d’orientation étaient plus petites dans la tâche de mouvement que de perception, suggérant l’implication de la proprioception pour le contrôle de l’orientation spatiale de la main lors des mouvements d’orientation et d’atteinte simultanées. Le deuxième objectif de cette recherche était d’étudier l’influence de la vision et de la proprioception dans le contrôle en temps réel de l’orientation spatiale de la main. Dans une tâche d’orientation de la main suivie d’une atteinte manuelle (letter posting task 2), les sujets devaient d’abord aligner l’orientation de la même poignée avec la fente fixée dans les mêmes orientations, puis réaliser un mouvement d’atteinte sans modifier l’orientation initiale de la main. Une augmentation des erreurs initiales et finales a été observée avec le retrait des informations visuelles. Malgré la consigne de ne pas changer l’orientation initiale de la main, une diminution des erreurs d’orientation a généralement été observée suite au mouvement d’atteinte, dans toutes les conditions sensorielles testées. Cette tendance n’a pas été observée lorsqu’aucune cible explicite n’était présentée et que les sujets devaient conserver l’orientation de départ de la main pendant le mouvement d’atteinte (mouvement intransitif; letter-posting task 3). La diminution des erreurs pendant l’atteinte manuelle transitive vers une cible explicite (letter-posting task 2), malgré la consigne de ne pas changer l’orientation de la main pendant le mouvement, suggère un mécanisme de corrections automatiques pour le contrôle en temps réel de l’orientation spatiale de la main pendant le mouvement d’atteinte naturel vers une cible stationnaire. Le troisième objectif de cette recherche était d’évaluer la contribution de l’expérience visuelle pour la perception et le contrôle de l’orientation spatiale de la main. Des sujets aveugles ont été testés dans les mêmes tâches de perception et de mouvement. De manière générale, les sujets aveugles ont présenté les mêmes tendances que les sujets voyants testés dans la condition proprioceptive (sans vision), suggérant que l’expérience visuelle n’est pas nécessaire pour le développement d’un mécanisme de correction en temps réel de l’orientation spatiale de la main basé sur la proprioception.

Optimizing Robust Quantum Gates in Open Quantum Systems

We are currently at the cusp of a revolution in quantum technology that relies not just on the passive use of quantum effects, but on their active control. At the forefront of this revolution is the implementation of a quantum computer. Encoding information in quantum states as “qubits” allows to use entanglement and quantum superposition to perform calculations that are infeasible on classical computers. The fundamental challenge in the realization of quantum computers is to avoid decoherence – the loss of quantum properties – due to unwanted interaction with the environment. This thesis addresses the problem of implementing entangling two-qubit quantum gates that are robust with respect to both decoherence and classical noise. It covers three aspects: the use of efficient numerical tools for the simulation and optimal control of open and closed quantum systems, the role of advanced optimization functionals in facilitating robustness, and the application of these techniques to two of the leading implementations of quantum computation, trapped atoms and superconducting circuits. After a review of the theoretical and numerical foundations, the central part of the thesis starts with the idea of using ensemble optimization to achieve robustness with respect to both classical fluctuations in the system parameters, and decoherence. For the example of a controlled phasegate implemented with trapped Rydberg atoms, this approach is demonstrated to yield a gate that is at least one order of magnitude more robust than the best known analytic scheme. Moreover this robustness is maintained even for gate durations significantly shorter than those obtained in the analytic scheme. Superconducting circuits are a particularly promising architecture for the implementation of a quantum computer. Their flexibility is demonstrated by performing optimizations for both diagonal and non-diagonal quantum gates. In order to achieve robustness with respect to decoherence, it is essential to implement quantum gates in the shortest possible amount of time. This may be facilitated by using an optimization functional that targets an arbitrary perfect entangler, based on a geometric theory of two-qubit gates. For the example of superconducting qubits, it is shown that this approach leads to significantly shorter gate durations, higher fidelities, and faster convergence than the optimization towards specific two-qubit gates. Performing optimization in Liouville space in order to properly take into account decoherence poses significant numerical challenges, as the dimension scales quadratically compared to Hilbert space. However, it can be shown that for a unitary target, the optimization only requires propagation of at most three states, instead of a full basis of Liouville space. Both for the example of trapped Rydberg atoms, and for superconducting qubits, the successful optimization of quantum gates is demonstrated, at a significantly reduced numerical cost than was previously thought possible. Together, the results of this thesis point towards a comprehensive framework for the optimization of robust quantum gates, paving the way for the future realization of quantum computers.

A trading strategy based on the lead–lag relationship between the spot index and futures contract for the FTSE 100

This paper examines the lead–lag relationship between the FTSE 100 index and index futures price employing a number of time series models. Using 10-min observations from June 1996–1997, it is found that lagged changes in the futures price can help to predict changes in the spot price. The best forecasting model is of the error correction type, allowing for the theoretical difference between spot and futures prices according to the cost of carry relationship. This predictive ability is in turn utilised to derive a trading strategy which is tested under real-world conditions to search for systematic profitable trading opportunities. It is revealed that although the model forecasts produce significantly higher returns than a passive benchmark, the model was unable to outperform the benchmark after allowing for transaction costs.

Reliability comparison of transmit/receive diversity and error control coding in low-power medium access control protocols

Low-power medium access control (MAC) protocols used for communication of energy constraint wireless embedded devices do not cope well with situations where transmission channels are highly erroneous. Existing MAC protocols discard corrupted messages which lead to costly retransmissions. To improve transmission performance, it is possible to include an error correction scheme and transmit/receive diversity. It is possible to add redundant information to transmitted packets in order to recover data from corrupted packets. It is also possible to make use of transmit/receive diversity via multiple antennas to improve error resiliency of transmissions. Both schemes may be used in conjunction to further improve the performance. In this study, the authors show how an error correction scheme and transmit/receive diversity can be integrated in low-power MAC protocols. Furthermore, the authors investigate the achievable performance gains of both methods. This is important as both methods have associated costs (processing requirements; additional antennas and power) and for a given communication situation it must be decided which methods should be employed. The authors’ results show that, in many practical situations, error control coding outperforms transmission diversity; however, if very high reliability is required, it is useful to employ both schemes together.

Generalization of the Y-differential autotransformer for 12- and 18-pulse converters

This work proposes a methodology to generalize the Y-connections for 12- and 18-pulse autotransformers. A single mathematical expression, obtained through simple trigonometric operations, represents all the connections. The proposed methodology allows choosing any ratio between the input and the output voltages. The converters can operate either as step-up or as step-down voltage. To simplify the design of the windings, graphics are generated to calculate the turn-ratio and the polarity of each secondary winding, with respect to the primary winding. A design example, followed by digital simulations, illustrates the presented steps. Experimental results of two prototypes (12 and 18 pulses) are presented. The results also show that high power factor is an inherent characteristic of multi-pulse converters, without any active or passive power factor pre-regulators needs. (c) 2005 Elsevier B.V. All rights reserved.

A study of neolignan compounds with biological activity against Paracoccidioides brasiliensis by using quantum chemical and chemometric methods

Métodos quimiométricos (estatísticos) são empregados para classificar um conjunto de compostos derivados de neolignanas com atividade biológica contra a Paracoccidioides brasiliensis. O método AM1 (Austin Model 1) foi utilizado para calcular um conjunto de descritores moleculares (propriedades) para os compostos em estudo. A seguir, os descritores foram analisados utilizando os seguintes métodos de reconhecimento de padrões: Análise de Componentes Principais (PCA), Análise Hierárquica de Agrupamentos (HCA) e o método de K-vizinhos mais próximos (KNN). Os métodos PCA e HCA mostraram-se bastante eficientes para classificação dos compostos estudados em dois grupos (ativos e inativos). Três descritores moleculares foram responsáveis pela separação entre os compostos ativos e inativos: energia do orbital molecular mais alto ocupado (EHOMO), ordem de ligação entre os átomos C1'-R7 (L14) e ordem de ligação entre os átomos C5'-R6 (L22). Como as variáveis responsáveis pela separação entre compostos ativos e inativos são descritores eletrônicos, conclui-se que efeitos eletrônicos podem desempenhar um importante papel na interação entre receptor biológico e compostos derivados de neolignanas com atividade contra a Paracoccidioides brasiliensis.