Fatores visuais de design e sua influência nos valores de compra do consumidor

Este artigo explora o tema das experiências dos consumidores nos ambientes físicos oferecidos pelas empresas de serviços, avaliando o impacto de fatores visuais de design sobre a percepção de valor por parte dos clientes de um ponto de venda com autosserviço. Foram identificados os valores de compra dos usuários e as características de design percebidas no âmbito do varejo de autosserviço, envolvendo leiaute, sinalização e iluminação presentes no ambiente. O valor de compra, considerado uma resposta interna do consumidor ao ambiente de varejo, incluiu dimensões utilitárias e hedônicas. O método aplicado foi o cross-sectional survey, com a aplicação de questionário a 274 estudantes universitários, os quais manifestaram sua percepção de três diferentes livrarias com autoatendimento, ilustradas por fotos. Os resultados obtidos apontaram quatro características de design com influência significativa na formação de valor de compra dos consumidores sob a perspectiva utilitária e hedônica.

Design and Crime (And other Diatribes)

Revista de Filosofia da Unidade de Investigação em Ciência, Tecnologia e Sociedade da Universidade Lusófona

Design Digital: Do traço ao pixel

Neste artigo pretende-se compreender a aversão que designers (e arquitectos, inclusive) sentem verdadeiramente em relação “ao computador”. Se de um modo ele é um excelente parceiro aceite por todos, simultaneamente, é com muita apreensão que se programam currículos de disciplinas universitárias para que os alunos aprendam as características projectuais do design, desenvolvam capacidade criativa (inteligência no uso de recursos para a produção de conceitos ou objectos) usando o computador sistematicamente, ou seja, não apenas como uma ferramenta de desenho, mas também de projecto (design). Os automatismos continuam a ser os monstros de hoje, porém, como aqui defendemos, os computadores sempre projectaram sombra humana, são “apenas” máquinas hipermédias que recorrem a existentes tecnologias para, supostamente, criarem novas mais transparentes na relação homem-máquina.

O design do manual escolar

O manual escolar, pelas suas características, é um produto de design gráfico, disciplina que tardou a desenvolver-se em Portugal. Após o 25 de Abril, as editoras escolares expandiram-se, e a globalização do ensino teve como consequência o aumento do número de manuais escolares. O desenvolvimento do design gráfico está intimamente ligado ao desenvolvimento da tecnologia informática, contribuindo fortemente para a alteração das características do manual escolar, sendo a mais notória a importância dada à imagem como portadora de informação. Sem investigação que suporte o seu actual formato, nem formação dos professores que permita explorar as suas novas potencialidades, interrogamo-nos sobre a sua eficácia. O campo da teoria da imagem é vasto e a sua aplicação, quer na realização, quer na exploração pedagógica do manual escolar, exige alguma sistematização que procuramos apresentar.

Design of improved rail-to-rail low-distortion and low-stress switches in advanced CMOS technologies

This paper describes the efficient design of an improved and dedicated switched-capacitor (SC) circuit capable of linearizing CMOS switches to allow SC circuits to reach low distortion levels. The described circuit (SC linearization control circuit, SLC) has the advantage over conventional clock-bootstrapping circuits of exhibiting low-stress, since large gate voltages are avoided. This paper presents exhaustive corner simulation results of a SC sample-and-hold (S/H) circuit which employs the proposed and optimized circuits, together with the experimental evaluation of a complete 10-bit ADC utilizing the referred S/H circuit. These results show that the SLC circuits can reduce distortion and increase dynamic linearity above 12 bits for wide input signal bandwidths.

Optimal design of piezolaminated structures using B-spline strip finite element models

A package of B-spline finite strip models is developed for the linear analysis of piezolaminated plates and shells. This package is associated to a global optimization technique in order to enhance the performance of these types of structures, subjected to various types of objective functions and/or constraints, with discrete and continuous design variables. The models considered are based on a higher-order displacement field and one can apply them to the static, free vibration and buckling analyses of laminated adaptive structures with arbitrary lay-ups, loading and boundary conditions. Genetic algorithms, with either binary or floating point encoding of design variables, were considered to find optimal locations of piezoelectric actuators as well as to determine the best voltages applied to them in order to obtain a desired structure shape. These models provide an overall economy of computing effort for static and vibration problems.

Smoking, consumption of alcohol and sedentary life style in population grouping and their relationships with lipemic disorders

The study, part of the project "Atherosclerotic cardiovascular diseases, lipemic disorders, hypertension, obesity and diabetis mellitus in a population of the metropolitan area of the southeastern region of Brazil", had the following objectives: a) the characterization and distribution among typical human socio-economic groupings, of the prevalence of some particular habits which constitute aspects of life-style-the use of tobacco, the use of alcohol and sedentary activity; b) the establishment of the interrelation between the above-mentioned habits and some lipemic disorders. The prevalence of the habits cited behaved in the following manner: the use of tobacco predominated among men, distributed uniformly throughout the social strata; among the women the average percentage of smokers was 18,9%, a significant difference occurring among the highest socio-economic class, where the average was of 40.2%. The sedentary style of life presented high prevalence, among both men and women with exception of the women of the highest socio-economic level and of the skilled working class. The use of alcohol, as one would expect, is a habit basically practised by the men, without any statistically significant differences between classes. For the purpose of establishing associations between these risk fictors and lipemic conditions four situations were chosen, of the following characteristics: 1- total cholesterol > or = 220 mg/dl and triglycerides > or = 150 mg/dl; 2- HDL cholesterol <35 mg/dl for men and <45 mg/dl for women and triglycerides levels > or = 150 mg/dl; 3- HDL cholesterol <35 mg/dl for men and <45 mg/dl for women and triglycerides levels <150 mg/dl; 4- total cholesterol 220 mg/dl with triglycerides levels <150 mg/dl. Six models of multiple (backward) regression were established, with seven independent variables- age, sex, use of tobacco, consumption of alcohol, light physical activity, hypertension and obesity. Significant associations (P<0,05) were revealed with hypercholesterolemia, accompanied by triglyceride levels > or = 150 mg/dl, and the following independent variables: age, use of tobacco and the interactions between obesity and smoking, age and sedentary lifestyle, sex and obesity (R2=22%); the standardized B coefficient showed that the variables with the greatest weight in the forecasting of the variation in the levels of cholesterol were smoking and the interaction between obesity and smoking. The hypercholesterolemia accompanied by triglycerides levels <150 mg/dl showed a positive association between total cholesterol and sex and the interactions obesity/smoking and sex/obesity. As regards HDL cholesterol accompanied by triglyceride/ levels > or = 150 mg/dl was inversely associated with obesity and the interaction smoking/ age and directly with age (R=31%). The standardized B coeffients, indicated that the variables obesity and the interactions smoking/age possessed a weight three times greater than age alone in accounting for the variation in the serum levels of HDL cholesterol. When accompanied by triglycerides <150 mg/dl there was no association between and the independent variables and the set of them presented R equal to 22%. The sum of top, in the population stutied in this project, the component habits of life-style (smoking, alcohol consumption and sedentary activity) which constitute risk factors which determine morbidity from atherosclerotic cardiovascular diseases are be found distributed through all the typical social groupings of this particular form of social organization. On the other hand, the seven independent variables used in the multiple regression models for the explanation of the lipemic conditions considered presented multiple determination coefficients which varied, approximately, between 20% and 30%. Thus it is important that in the genetic epidemiology the study of the morbidities in question be emphasized.

Design of a sea-level tsunami detection network for the Gulf of Cadiz

The devastating impact of the Sumatra tsunami of 26 December 2004, raised the question for scientists of how to forecast a tsunami threat. In 2005, the IOC-UNESCO XXIII assembly decided to implement a global tsunami warning system to cover the regions that were not yet protected, namely the Indian Ocean, the Caribbean and the North East Atlantic, the Mediterranean and connected seas (the NEAM region). Within NEAM, the Gulf of Cadiz is the more sensitive area, with an important record of devastating historical events. The objective of this paper is to present a preliminary design for a reliable tsunami detection network for the Gulf of Cadiz, based on a network of sea-level observatories. The tsunamigenic potential of this region has been revised in order to define the active tectonic structures. Tsunami hydrodynamic modeling and GIS technology have been used to identify the appropriate locations for the minimum number of sea-level stations. Results show that 3 tsunameters are required as the minimum number of stations necessary to assure an acceptable protection to the large coastal population in the Gulf of Cadiz. In addition, 29 tide gauge stations could be necessary to fully assess the effects of a tsunami along the affected coasts of Portugal, Spain and Morocco.

MDAI: Model based Design in Automobile Industry

It is proposed a new approach based on a methodology, assisted by a tool, to create new products in the automobile industry based on previous defined processes and experiences inspired on a set of best practices or principles: it is based on high-level models or specifications; it is component-based architecture centric; it is based on generative programming techniques. This approach follows in essence the MDA (Model Driven Architecture) philosophy with some specific characteristics. We propose a repository that keeps related information, such as models, applications, design information, generated artifacts and even information concerning the development process itself (e.g., generation steps, tests and integration milestones). Generically, this methodology receives the users' requirements to a new product (e.g., functional, non-functional, product specification) as its main inputs and produces a set of artifacts (e.g., design parts, process validation output) as its main output, that will be integrated in the engineer design tool (e.g. CAD system) facilitating the work.

New Steel Alloys for the Design of Heat Recovery Steam Generator Components of Combined Cycle Gas Plants

Demand for power is growing every day, mainly due to emerging economies in countries such as China, Russia, India, and Brazil. During the last 50 years steam pressure and temperature in power plants have been continuously raised to improve thermal efficiency. Recent efforts to improve efficiency leads to the development of a new generation of heat recovery steam generator, where the Benson once-through technology is applied to improve the thermal efficiency. The main purpose of this paper is to analyze the mechanical behavior of a high pressure superheater manifold by applying finite element modeling and a finite element analysis with the objective of analyzing stress propagation, leading to the study of damage mechanism, e.g., uniaxial fatigue, uniaxial creep for life prediction. The objective of this paper is also to analyze the mechanical properties of the new high temperature resistant materials in the market such as 2Cr Bainitic steels (T/P23 and T/P24) and also the 9-12Cr Martensitic steels (T/P91, T/P92, E911, and P/T122). For this study the design rules for construction of power boilers to define the geometry of the HPSH manifold were applied.

Child-care attendance and common morbidity: evidence of association in the literature and questions of design

Papers on child-care attendance as a risk factor for acute respiratory infections and diarrhea were reviewed. There was great variety among the studies with regard to the design, definition of exposure and definition of outcomes. All the traditional epidemiological study designs have been used. The studies varied in terms of how child-care attendance in general was defined, and for different settings. These definitions differed especially in relation to the minimum time of attendance required. The outcomes were also defined and measured in several different ways. The analyses performed were not always appropriate, leading to sets of results of uneven quality, and composed of different measures of association relating different exposures and outcomes, that made summarizing difficult. Despite that, the results reported were remarkably consistent. Only two of the papers reviewed failed to show some association between child-care attendance and increased acute respiratory infections, or diarrhea. On the other hand, the magnitude of the associations reported varied widely, especially for lower respiratory infections. Taken together, the studies so far published provide evidence that children attending child-care centers, especially those under three years of age, are at a higher risk of upper respiratory infections, lower respiratory infections, and diarrhea. The studies were not consistent, however, in relation to attendance at child-care homes. Children in such settings were sometimes similar to those in child-care centers, sometimes similar to those cared for at home, and sometimes presented an intermediate risk.