667 resultados para CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA: PATOLOGIA ORAL


Relevância:

100.00% 100.00%

Publicador:

Resumo:

As maloclusões estão sempre presente em nossa pratica clínica, por isso é importante a prevenção das causas dessas maloclusões. Os transtornos dos hábitos podem aparecer nas diferentes maloclusões de Angle, Esses transtornos de hábitos podem ser causadores de maloclusões e evidenciar o tipo do padrão facial. O objetivo dessa pesquisa foi de analisar se a relação nos transtorna dos hábitos com as maloclusões de Angle e o tipo facial. A amostra foi composta por 398 pacientes com média de idade de 13 anos e 3 meses. De acordo com os resultados encontrados pode-se concluir que: Não houve associação estatisticamente significante entre o tipo de maloclusão e o tipo de amamentação; Não houve associação estatisticamente significante entre o tipo de maloclusão e a sucção de dedo ou de chupeta; Não houve associação estatisticamente significante entre o tipo facial e tipo de amamentação; Não houve associação estatisticamente significante entre tipo facial e o hábito de sucção de chupeta; Na associação de entre o tempo do hábito de sucção e tipo facial,houve maior freqüência deste hábito no tipo dolicofacial;Não houve associação estatisticamente entre o tempo dos hábitos e maloclusão; O tempo de sucção de chupeta foi maoir em braquifacial em relação dolicofacial.(AU)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este estudo avaliou os efeitos do laser de baixa intensidade na velocidade de movimentação ortodôntica dos caninos durante a fase de retratação e na ancoragem dos molares por meio de tomografia computadorizada de feixe cônico. Foram selecionados 21 pacientes que necessitavam de extração de primeiros pré-molares sendo que 15 apresentavam maloclusão de classe I de Angle e 6 classe II de Angle. Foram avaliados 72 caninos e 72 molares , sendo 72 molares, sendo 42 caninos e 42 molares superiores, e 30 caninos e 30 molares inferiores. A retratação inicial dos caninos foi realizada com arco segmentado 0,014, por mio de mola de níquel titâneo com uma força de 150 g. Um dos caninos foi irradiado com laser de diodo, com o protocolo de aplicação de 0nm/40mW/10J/cm2/04,J por ponto, sendo cinco pontos por vestibular e cinco pontos por lingual na região radicular , totalizando Et=4J. Esta aplicação foi realizada no dia em que foi ativada a mola de retratação, sendo que no canino contralateral foi realizada uma simulação (placebo). Decorridos trinta dias em média, houve nova ativação da mola e aplicação do laser no mesmo canino já irradiado.(AU)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este trabalho teve como finalidade avaliar a fase de crescimento em uma amostra de 49 pacientes, com idades variando de 9 a 15 anos, observando as vértebras cervicais em radiografias laterais, tomadas na posição natural de cabeça (PNC) e com erros de posicionamento, com inclinações de cabeça de 15o para cima (PNC-Alta) e de 15 o para baixo (PNC-Baixa), visando definir o quão importante isto é na precisão da avaliação da fase de crescimento. O teste kappa ponderado mostrou um grau de concordância substancial entre PNC e PNC-Alta e entre PNC e PNC-Baixa. Já o teste não paramétrico de wilcoxon (p<0,05) mostrou diferença estatisticamente significante entre essas comparações. Desta forma, a PNC demonstrou ser mais confiável na avaliação do Índice de Maturação das Vértebras Cervicais (IMVC), porém as telerradiografias com erro de posicionamento avaliadas não tiveram um grau de discordância que indicasse sua não utilização na clínica para predição de crescimento.(AU)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo deste estudo retrospectivo foi comparar a eficiência oclusal do tratamento ortopédico com os aparelhos funcionais Regulador de Função Fränkel-2 e Bionator de Balters em um estágio de desenvolvimento dental diferente e comparar com um grupo controle. A amostra constituiu-se de 45 registros de documentações, pertencentes ao arquivo do programa de pós-graduação em Odontologia, área de concentração Ortodontia, da Universidade Metodista de São Paulo, com má oclusão inicial de Classe II bilateral, divisão 1, sendo 15 pacientes provenientes do grupo tratados com Bionator (grupo 1) com média de idade incial de 8,56 anos e com 80% dos casos em um estágio de desenvolvimento dental-2 (DS 2), 15 pacientes tratados com RF-2 (grupo 2) com média de idade inicial de 10,71 anos e com 80% dos casos em um estágio de desenvolvimento dental-3 (DS 3), e 15 pacientes controle (grupo 3) com media de idade incial de 10,03 anos e com estágio de desenvolvimento dental compatível com os grupos 1 e 2. Os grupos foram divididos em duas fases, de acordo com o período de avaliação: T1:início de tratamento e T2: final de tratamento, totalizando 90 pares de modelos. As avaliações oclusais foram realizadas em modelos de gesso, utilizando o Índice PAR com auxílio da régua PAR e de um paquímetro digital devidamente calibrado. Para comparação entre os três grupos foi utilizado Análise de Variância a um critério e em seguida o Teste de Tukey. A severidade da má oclusão (PAR Inicial) foi semelhante em ambos os grupos, porém, o PAR final apresentou uma diferença estatisticamente significante onde o percentual de redução do índice PAR para o grupo 1 foi de 20,72%, para o grupo 2 foi de 60,06% e no grupo 3 não houve alteração significante do valor do Índice PAR. O presente estudo conclui que o tratamento da má oclusão de Classe II, 1a divisão é mais eficiente quando iniciado no estágio de desenvolvimento dental 3 (DS 3) do que no estágio de desenvolvimento dental 2 (DS2). Além disso, ressalta-se a importância do uso mais prolongado do aparelho ortopédico, já que os pacientes do grupo 2 apresentaram melhores resultados oclusais.(AU)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A terradiografia cetalométrica póstero-anterior digital está substituindo a telerradiografia convencional, porém permanece a dúvida se os erros de reprodutibilidade encontrados nas telerradiografias cefalométricas póstero-anteriores, também ocorreriam nas radiográfias digitais e se o formato de arquivo da imagem poderá influenciar na reprodutibilidade dos pontos cefalométricos. O objetivo deste estudo foi avaliar a reprodutibilidade da marcação de alguns pontos cefalométricas da análise cefalométrica de RICKETTS, em telerradiografias cefalométricas póstero-anteriores digitais, nos formatos DICOM, TIFF e JPEG. A amostra consistiu de 150 imagens digitais de terradiografias cefalométricas póstero-anteriores, obtidas a partir de 30 indivíduos, no formato DICOM; que foram convertidas para os formatos TIFF e JPEG nos fatores de qualidade 100, 80 e 60. Após o cegamento e randomização da amostra, três ortodontistas marcaram os pontos cefalométricos utilizando o sistema de coordenadas cartesianas, eixos x e y, no Programa Radiocef (Radio Memory) Para a análise estatística foram utilizados a Correlação Intraclasse, Fórmula de Dalhberg, Análise de Variância (ANOVA) e Análise de Comparações Multiplas de Bonferroni.(AU)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A proporção anterior do tamanho dental de Bolton deve ser considerada no planejamento do caso quando se almeja uma oclusão ótima na finalização do tratamento ortodôntico. Este estudo teve por objetivo verificar se há relação entre as seguintes variáveis e a proporção anterior de Bolton: espessura vestíbulo-lingual dos incisivos superiores, relação entre a angulação dental dos incisivos superiores e o espaço mesiodistal por eles ocupado, sobressaliência e sobremordida, e se há dimorfismo sexual. Foram avaliados 35 pares de modelos em gesso com oclusão normal natural, provenientes de 27 indivíduos do sexo feminino e 8 do masculino, leucodermas, com idade entre 13 anos e 17 anos e 4 meses (idade média: 15 anos e 8 meses). Utilizou-se um paquímetro digital e um fragmento de régua para a obtenção das medidas. A proporção anterior encontrada foi de 77,48% (DP±2,22), estatisticamente semelhante ao valor proposto por Bolton, 77,20% (DP±1,65). De acordo com o teste de Pearson, somente a sobremordida mostrou relação estatisticamente significante com a proporção dental anterior. Não foi observado dimorfismo sexual.(AU)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O objetivo deste estudo foi avaliar a topografia de superfície dos fios estéticos, antes e após teste de deflexão. A amostra foi composta por 70 corpos de prova de fios 0,014 redondos, sendo 10 de cada uma das marcas comerciais avaliadas: Orthocosmetic Elastinol (Masel), Flexy Super Elastic Esthetic (Orthometric), InVu (TP Orthodontics) e ProForm Nitanium (Ortho Organizers) fios de NiTi revestidos por Teflon®; Optis (TP Orthodontics) fio de resina reforçado por fibra de vidro ou FRP; Niticosmetic (Tecnident) fio de NiTi revestido por resina epoxídica; e Nitinol SE (3M Unitek) fio de NiTi superelástico, usado para controle. A topografia de superfície de cada fio foi avaliada por rugosímetro e por microscópio óptico, antes e após ser submetido a ensaio de deflexão, no lado em que a força foi aplicada e no lado oposto a este. Cada fio foi defletido em 3,1mm, a uma velocidade de 1mm/min, com célula de carga de 5N a 36⁰C + 1⁰C. A análise de variância a três critérios (p<0,05) mostrou diferença significante entre os fios e o teste de Tukey mostrou que o fio Optis (TP Orthodontics) apresentou aumento nos parâmetros de rugosidade Ra, Rt e Rz, após a deflexão. O fio Niticosmetic (Tecnident) apresentou aumento na rugosidade média (Ra). O fio InVu (TP Orthodontics) foi o único que mostrou aumento na rugosidade no lado em que a força foi aplicada. A análise visual por meio de microscopia óptica revelou alterações na superfície em todos os fios estéticos após o teste de deflexão, desde delaminações do revestimento, observadas nos fios Orthocosmetic Elastinol e InVu, riscos permanentes na superfície, como visto nos fios Flexy Super Elastic Esthetic, Niticosmetic e ProForm Nitanium, e até mesmo fratura incompleta, no fio Optis. Concluiu-se que o fio Niticosmetic apresentou topografia de superfície similar ao fio metálico, e os demais fios estéticos apresentaram maior rugosidade e alterações visuaisna superfície.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The chronic state of hyperglycemia due to diabetes mellitus affects multiples organs impairing life quality. In bone, diabetes alters strength and mineral density and also suppresses the osteoblast activity, leading to an unbalanced bone healing process. Hyperbaric oxygen therapy (HBO) is suggested as an adjuvant treatment to accelerate bone repair. This study evaluated the effects of HBO in the number of mast cells and in new bone formation at the initial stage of bone repair in normoglycemic and diabetic rats. It was hypothesized that HBO treatment may improve bone repair in diabetic bone. The rats were equally divided in four groups: Control (C); Control + HBO (CH); Diabetes (D) and Diabetes + HBO (DH). Diabetes was induced by streptozotocin (65mg/kg) and femoral bone defects were created thirty days after diabetes induction in all groups. HBO initiated immediately after surgery procedure and was performed daily, for 7 days, in the CH e DH groups. Seven days after surgery, all animals were euthanized. The femur diaphyses were removed, fixated, decalcified and processed for paraffin embedding. The semi-serial histological sections obtained were stained with Hematoxylin-Eosin (HE), Mallory Trichrome and Toluidine Blue. The qualitative analysis was conducted in the histology slides stained with HE, where it was evaluated the morphological aspects of bone repair in the lesion area, observing the presence of clot, inflammatory cells, granulation tissue, type of bone tissue, morphology of bone cells, and thickness and organization of bone trabeculae. In the slides stained with Mallory Trichrome and Toluidine Blue were evaluated the percentage of new bone formation and number of mast cells, respectively. The qualitative analysis showed that the CH group presented a more advanced stage of bone repair compared to the C group, showing thicker trabeculae and greater bone filling of the lesion area. In D and DH group, the lesion area was partially filled with new bone formation tissue and presented thinner trabeculae and fewer areas associated to osteoclasts compared to control group. The histomorphometric analysis showed a significant improvement in new bone formation (p<0.001) comparing CH (38.08 ± 4.05) and C (32.05 ± 5.51); C and D (24.62 ± 2.28 and CH and DH (27.14 ± 4.21) groups. In the normoglycemic rats there was a significant increasing in the number of mast cells (p<0.05) comparing C (8.06 ± 5.15) and CH (21.06 ± 4.91) groups. In conclusion, this study showed that diabetes impaired bone repair and HBO was only able to increase new bone formation and the number of mast cells in the normoglycemic animals.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

CHAPTER 1 - This study histologically evaluated two implant designs: a classic thread design versus another specifically designed for healing chamber formation placed with two drilling protocols. Forty dental implants (4.1 mm diameter) with two different macrogeometries were inserted in the tibia of 10 Beagle dogs, and maximum insertion torque was recorded. Drilling techniques were: until 3.75 mm (regular-group); and until 4.0 mm diameter (overdrillinggroup) for both implant designs. At 2 and 4 weeks, samples were retrieved and processed for histomorphometric analysis. For torque and BIC (bone-to-implant contact) and BAFO (bone area fraction occupied), a general-linear model was employed including instrumentation technique and time in vivo as independent. The insertion torque recorded for each implant design and drilling group significantly decreased as a function of increasing drilling diameter for both implant designs (p<0.001). No significant differences were detected between implant designs for each drilling technique (p>0.18). A significant increase in BIC was observed from 2 to 4 weeks for both implants placed with the overdrilling technique (p<0.03) only, but not for those placed in the 3.75 mm drilling sites (p>0.32). Despite the differences between implant designs and drilling technique an intramembranous-like healing mode with newly formed woven bone prevailed. CHAPTER 2 - The objective of this preliminary histologic study was to determine whether the alteration of drilling protocols (oversized, intermediate, undersized drilling) present different biologic responses at early healing periods of 2 weeks in vivo in a beagle dog model. Ten beagle dogs were acquired and subjected to surgeries in the tibia 2 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.5 mm, 3.75 mm, and 4.0 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical significance was set to 95% level of confidence and the number of dogs was considered as the statistical unit for all comparisons. For the torque and BIC and BAFO, a general linear model was employed including instrumentation technique and time in vivo as independent. Overall, the insertion torque increased as a function of drilling diameter from 4.0 mm, to 3.75 mm, to 3.5 mm, with a significant difference in torque levels between all groups (p<0.001). Statistical assessment of BIC and BAFO showed significantly higher values for the 3.75 mm (recommended) drilling group was observed relative to the other two groups (p<0.001). Different drilling dimensions resulted in variations in insertion torque values (primary stability) and different pattern of healing and interfacial remodeling was observed for the different groups. CHAPTER 3 - The present study evaluated the effect of different drilling dimensions (undersized, regular, and oversized) in the insertion and removal torques of dental implants in a beagle dog model. Six beagle dogs were acquired and subjected to bilateral surgeries in the radii 1 and 3 weeks before euthanasia. During surgery, 3 implants, 4 mm in diameter by 10 mm in length, were placed in bone sites drilled to 3.2 mm, 3.5 mm, and 3.8 mm in final diameter. The insertion and removal torque was recorded for all samples. Statistical analysis was performed by paired t tests for repeated measures and by t tests assuming unequal variances (all at the 95% level of significance). Overall, the insertion torque and removal torque levels obtained were inversely proportional to the drilling dimension, with a significant difference detected between the 3.2 mm and 3.5 mm relative to the 3.8 mm groups (P < 0.03). Although insertion torque–removal torque paired observations was statis- tically maintained for the 3.5 mm and 3.8 mm groups, a significant decrease in removal torque values relative to insertion torque levels was observed for the 3.2 mm group. A different pattern of healing and interfacial remodeling was observed for the different groups. Different drilling dimensions resulted in variations in insertion torque values (primary stability) and stability maintenance over the first weeks of bone healing.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The past few decades have brought many changes to the dental practice and the technology has become ready available. The result of a satisfactory rehabilitation treatment basically depends on the balance between biological and mechanical factors. The marginal adaptation of crowns and prosthetic structures is vital factor for long-term success. The development of CAD / CAM technology in the manufacture of dental prostheses revolutionized dentistry, this technology is capable of generating a virtual model from the direct digital scanning from the mouth, casts or impressions. It allows the planning and design of the structure in a computered software. The virtual projects are obtained with high precision and a significant reduction in clinical and laboratory time. Thus, the present study (Chapters 1, 2 and 3) computed microtomography was used to evaluate, different materials, different CAD/CAM systems, different ways of obtaining virtual model (with direct or indirect scanning), and in addition, also aims to evaluate the influence of cementing agent in the final adaptation of crowns and copings obtained by CAD / CAM. Furthermore, this study (Chapter 4, 5 and 6) also aims to evaluate significant differences in vertical and horizontal misfits in abutment-free frameworks on external hexagon implants (HE) using full castable UCLAs, castable UCLAs with cobalt-chromium pre-machined bases and obtained by CAD / CAM with CoCr or Zirconia by different scanning and milling systems. For this, the scanning electron microscopy and interferometry were used. It was concluded that the CAD / CAM technology is capable to produce restorations, copings and screw-retained implant-supported frameworks in different materials and systems offering satisfactory results of marginal accuracy, with significative reduction in clinical and laboratory time.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The purpose of this systematic review was to compare the effectiveness of topical treatments to minimize post-radiotherapy xerostomia. PubMed, Cochrane Library (CENTRAL) and LILACS databases were searched without restriction on date or language until the 6thAugust, 2015. Key-wordsused for searching were radiotherapy, xerostomia and saliva. Two independent reviewers screened titles and abstracts, carried out data extraction and assessed risk of bias. The first search identified 429 articles. From these, 117 studies were selected for full-text reading, from which 18 were included in the qualitative synthesis. From the eighteen articles included, seven were non- controlled clinical trial, one article was controlled clinical trial and ten studies were randomized clinical trials (three clinical trials were placebo controlled and seven were crossover). By the assessment of the quality of the studies included, ten showed high risk of bias, four showed moderate risk of bias and four presented low risk of bias. All interventions were considered effective in treating xerostomia (mucin, polysaccharides, aloe vera, rape oil, linseed oil, carboxymethylcellulose, polyethylene oxide, pilocarpine and systems of care for xerostomia - gel, paste and mouthwash). Meta-analysis could not be performed due to heterogeneity between thestudiesand interventions. This systematic review showed that a single and general protocol for topical treatment of xerostomia post-radiotherapy does not exist and that follow-up visits should be performed to validate the individualized treatment plan.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The aim of this cross-sectional study was to investigate the association of early childhood caries (ECC) with the Apgar score (AS) and other variables related to the child (conditions at birth and medical history) and related to the child and parents and / or guardians and family (demographic, socioeconomic and behavioral). One hundred and twenty healthy children aged between 3-5 years-old treated by Pediatric Dentistry Area of Dentistry College of the Federal University of Uberlandia during 2015 were selected. To obtain qualitative and quantitative variables a questionnaire was applied as an interview to the parents and/or guardians. The 5-minute AS (interest exposure) was obtained through the record in the Child Health Handbook. To assess the prevalence of caries (clinical dependent variable), a single calibrated researcher conducted the clinical examination, according to the criteria of the World Health Organization. Caries experience was measured using the indexes dmft and dmfs. The children were classified into three groups, according to age and dmfs index: no caries (NC), with ECC and with severe early childhood caries (S-ECC). Data were tabulated and submitted to statistical analysis using the SPSS software (IBM, Inc, Chicago, Illinois, USA) 17th version. Three logistics models were carried out having the following classifications: NC and ECC, NC and S-ECC, ECC and S-ECC (p<0.05). The overall ECC prevalence, considering children with ECC and S-ECC, was 55,8% (n= 67). The AS was not a statistically significant variable. The child’s age, weaning age and recent hospitalization were variables associated with the ECC prevalence. The age of brush start and the educational level of the mother were variables associated with the S-ECC prevalence. Considering the ECC and the S-ECC groups, the child's age and the beginning of the use of fluoride toothpaste, recent hospitalization, the educational level of the mother and the father's income were associated with the S-ECC prevalence. Considering the methodology employed and the analysis of results, it was concluded that there was no association between the ECC with the AS in healthy children. However, an association was found of ECC and S-ECC with some variables related to birth and to medical history of the child (recent hospitalization), demographic (child’s age), socioeconomic (educational level of the mother and father's income) and behavioral (age of brush start, weaning age and use of fluoride toothpaste) related to children and to the parents and/or guardians.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The general aim of this study was to evaluate the conical interface of pilar/implant. The specific aims were to evaluate the influence of hexagonal internal index in the microleakage and mechanical strength of Morse taper implants; the effect of axial loading on the deformation in cervical region of Morse taper implants of different diameters through strain gauge; the effect of axial loading in cervical deformation and sliding of abutment into the implant by tridimensional measurements; the integrity of conical interface before and after dynamic loading by microscopy and microleakage; and the stress distribution in tridimensional finite element models of Morse taper implants assembled with 2 pieces abutment. According to the obtained results, could be concluded that the diameter had influence in the cervical deformation of Morse taper implants; the presence of internal hexagonal index in the end of internal cone of implant didn´t influenced the bacterial microleakage under static loading neither reduced the mechanical strength of implants; one million cycles of vertical and off-center load had no negative influence in Morse taper implant integrity.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Background: Several theories, such as the biological width formation, the inflammatory reactions due to the implant-abutment microgap contamination, and the periimplant stress/strain concentration causing bone microdamage accumulation, have been suggested to explain early periimplant bone loss. However, it is yet not well understood to which extent the implant-abutment connection type may influence the remodeling process around dental implants. Aim: to evaluate clinical, bacteriological, and biomechanical parameters related to periimplant bone loss at the crestal region, comparing external hexagon (EH) and Morse-taper (MT) connections. Materials and methods: Twelve patients with totally edentulous mandibles received four custom made Ø 3.8 x 13 mm implants in the interforaminal region of the mandible, with the same design, but different prosthetic connections (two of them EH or MT, randomly placed based on a split-mouth design), and a immediate implant- supported prosthesis. Clinical parameters (periimplant probing pocket depth, modified gingival index and mucosal thickness) were evaluated at 6 sites around the implants, at a 12 month follow-up. The distance from the top of the implant to the first bone-to-implant contact – IT-FBIC was evaluated on standardized digital peri-apical radiographs acquired at 1, 3, 6 and 12 months follow-up. Samples of the subgingival microbiota were collected 1, 3 and 6 months after implant loading. DNA were extracted and used for the quantification of Tanerella forsythia, Porphyromonas gingivalis, Aggragatibacter actinomycetemcomitans, Prevotella intermedia and Fusobacterium nucleatum. Comparison among multiple periods of observation were performed using repeated-measures Analysis of Variance (ANOVA), followed by a Tukey post-hoc test, while two-period based comparisons were made using paired t- test. Further, 36 computer-tomographic based finite element (FE) models were accomplished, simulating each patient in 3 loading conditions. The results for the peak EQV strain in periimplant bone were interpreted by means of a general linear model (ANOVA). Results: The variation in periimplant bone loss assessed by means of radiographs was significantly different between the connection types (P<0.001). Mean IT-FBIC was 1.17±0.44 mm for EH, and 0.17±0.54 mm for MT, considering all evaluated time periods. All clinical parameters presented not significant differences. No significant microbiological differences could be observed between both connection types. Most of the collected samples had very few pathogens, meaning that these regions were healthy from a microbiological point of view. In FE analysis, a significantly higher peak of EQV strain (P=0.005) was found for EH (mean 3438.65 µ∑) compared to MT (mean 840.98 µ∑) connection. Conclusions: Varying implant-abutment connection type will result in diverse periimplant bone remodeling, regardless of clinical and microbiological conditions. This fact is more likely attributed to the singular loading transmission through different implant-abutment connections to the periimplant bone. The present findings suggest that Morse-taper connection is more efficient to prevent periimplant bone loss, compared to an external hexagon connection.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

BMPs are components superfamily ligands transformation growth fator-β (TGF-β) secreted into the extracellular environment, with mechanisms of intercellular communication through specific ligands and receptors in various target cells, being recognized for its influence in osteogenic induction, also play an important role in tissue homeostasis, cell proliferation, differentiation control , in addition to being present in the development of various malignancies. The aim of this study was to compare the immunohistochemical expression of BMP-2, BMP-4 and its receptors BMPRIA and BMPRII in cases of ameloblastoma and adenomatoid odontogenic tumor. The sample consisted of 20 cases of solid ameloblastoma (SA), 10 cases of ameloblastoma unicystic (UA) and 16 cases of adenomatoid odontogenic tumor (AOT). The expression of BMPs and their receptors was evaluated in the parenchyma and stroma of lesions, establishing the percentage of immunopositive cells (0 - negative; 1-1 % to 10 % of cells positive; 2 - 11% to 25% of positive cells; 3 - 26% to 50% of cells positive; 4 - 51% to 75 % of positive cells; 5 - more than 75% positive cells). Analysis of the expression of BMP-2 revealed no statistically significant differences in parenchymal (p = 0.925) and stromal component (p = 0.345) between the groups, as well as BMP-4 (p = 0.873 / p = 0.131). In the epithelial component, SA and AOT had a higher frequency of score 5. In turn, all cases of UA were classified as score 5. The analysis of the stromal component showed no statistically significant difference between groups with respect to median scores BMPRIA positivity (p = 0.768) and BMPRII (p = 0.779). In the epithelial component of SA and UA, no statistically significant correlations between imunoexpression proteins analyzed were observed. In turn, the group of AOT, statistically significant positive correlations between the scores of expression of all studied proteins were found. In the stromal component, statistically significant positive correlations were found only in the SA group in BMP -4 and BMPRII (r = 0.476; p = .034), in the UA in BMP-4 and BMPRIA (r = 0.709; p = 0.022). The results of this study suggest that the BMPs and their receptors are involved in the development process odontogenic tumors. BMP-4, in turn, besides being present in odontogenic tumors have the capacity to form mineralized material.