644 resultados para locational disadvantage
Resumo:
This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers. The waterless technology is compared to conventional offset with the difference that the plate is based on a sort of laminatetechnology. Like conventional plates this plate has a base made of aluminium. Lightsensitive photopolymer isunited as a layer or coat on top of the aluminium and a 2µm thin oleophobic siliconlayer is applied on top of the photopolymer. Considering the print, the waterless method has a higher qualitygrade than conventional offset. No water is emulsifiedin the ink, and therefore the printed dot gets a higher density. The loss of dampening solution and higher tack of the ink gives sharper dots. This makes the colourspace bigger why a greater range of colours can be printed. The loss of dampening solution gives a more stable dotgain, which contributes to that a higher screen can be used. The disadvantage is that the plate can't do as many rotations as the conventional plate. A waterless plate makes around 100 000-500 000 rotations before it needs to be removed owing to type- and manufacturer of the plate. The plate is also slightly more sensitive and expensive than conventional plates, around 1,4 - 1,7 × aluminium printing plates. A waterless system can be installed in a conventional printing press by degrees and when large editions are being printed a cooler needs to be installed in the oscillationrollers of the press, since an increase in temperature can make the oleophobic parts of the plate oleophilic. The Cortina is however equipped with a temperature controlsystem at the beginning. To avoid picking, caused by the tacky ink, a blanket with a high “quick release” should be used.
Resumo:
An international standard, ISO/DP 9459-4 has been proposed to establish a uniform standard of quality for small, factory-made solar heating systerns. In this proposal, system components are tested separatelyand total system performance is calculated using system simulations based on component model parameter values validated using the results from the component tests. Another approach is to test the whole system in operation under representative conditions, where the results can be used as a measure of the general system performance. The advantage of system testing of this form is that it is not dependent on simulations and the possible inaccuracies of the models. Its disadvantage is that it is restricted to the boundary conditions for the test. Component testing and system simulation is flexible, but requires an accurate and reliable simulation model.The heat store is a key component conceming system performance. Thus, this work focuses on the storage system consisting store, electrical auxiliary heater, heat exchangers and tempering valve. Four different storage system configurations with a volume of 750 litre were tested in an indoor system test using a six -day test sequence. A store component test and system simulation was carried out on one of the four configurations, applying the proposed standard for stores, ISO/DP 9459-4A. Three newly developed test sequences for intemalload side heat exchangers, not in the proposed ISO standard, were also carried out. The MULTIPORT store model was used for this work. This paper discusses the results of the indoor system test, the store component test, the validation of the store model parameter values and the system simulations.
Resumo:
The starting point for this work was a discussion between my supervisor and myself during my teaching training. The discussion concerned the appropriateness of allowing students make films with sexual content. Film gives young people the opportunity to express their feelings and broaden their views. If the film then disseminates to unknown people via in-ternet, which it most likely will do, maybe it is no longer so positive. The aim of this study is to shed light on various aspects of identity and ethics that are important to keep in mind when young people in school make films. These aspects are to avoid making young people vulnerable to abuse and improper influence. One aim is also to highlight the advantages of making films in school. The study is inspired by hermeneutic interpretive and based on qualitative interviews. The informants are four students at the age of 18-19 at two different schools in one municipality in Sweden.The results of the study show that it is important for the informants that the films are pro-duced in an aesthetically good way so that it appeals to the audience. Two of the infor-mants have a specific audience and make more conscious choices, so that the audience will understand what is said. The study shows that the more a filmmaker considers the audi-ence, the more consciously he or she uses film as communication. To get positive feedback is important, but it is mostly friends of the filmmakers that actually comment. To get nega-tive comments is regarded as a disadvantage when placing material on the internet. Howev-er, none of the informants in the study have received negative comments on what has been posted. The opinions about what the informants believe is inappropriate to post on inter-net or to make films about regards sexuality and violations. Earlier studies show that mate-rial can, because it is interesting to other people, become widespread. For this reason it is important for teachers to have conversations with students about their preferences and opinions on various issues. Adults need to interfere in the young people's world, while be-ing open to their opinions. Then the young people's value system will be built up and give them a safe tool that helps them to avoid improper influence.
Resumo:
This dissertation is focused on theoretical and experimental studies of optical properties of materials and multilayer structures composing liquid crystal displays (LCDs) and electrochromic (EC) devices. By applying spectroscopic ellipsometry, we have determined the optical constants of thin films of electrochromic tungsten oxide (WOx) and nickel oxide (NiOy), the films’ thickness and roughness. These films, which were obtained at spattering conditions possess high transmittance that is important for achieving good visibility and high contrast in an EC device. Another application of the general spectroscopic ellipsometry relates to the study of a photo-alignment layer of a mixture of azo-dyes SD-1 and SDA-2. We have found the optical constants of this mixture before and after illuminating it by polarized UV light. The results obtained confirm the diffusion model to explain the formation of the photo-induced order in azo-dye films. We have developed new techniques for fast characterization of twisted nematic LC cells in transmissive and reflective modes. Our techniques are based on the characteristics functions that we have introduced for determination of parameters of non-uniform birefringent media. These characteristic functions are found by simple procedures and can be utilised for simultaneous determination of retardation, its wavelength dispersion, and twist angle, as well as for solving associated optimization problems. Cholesteric LCD that possesses some unique properties, such as bistability and good selective scattering, however, has a disadvantage – relatively high driving voltage (tens of volts). The way we propose to reduce the driving voltage consists of applying a stack of thin (~1µm) LC layers. We have studied the ability of a layer of a surface stabilized ferroelectric liquid crystal coupled with several retardation plates for birefringent color generation. We have demonstrated that in order to accomplish good color characteristics and high brightness of the display, one or two retardation plates are sufficient.
Resumo:
Transportation is seen as one of the major sources of CO2 pollutants nowadays. The impact of increased transport in retailing should not be underestimated. Most previous studies have focused on transportation and underlying trips, in general, while very few studies have addressed the specific affects that, for instance, intra-city shopping trips generate. Furthermore, most of the existing methods used to estimate emission are based on macro-data designed to generate national or regional inventory projections. There is a lack of studies using micro-data based methods that are able to distinguish between driver behaviour and the locational effects induced by shopping trips, which is an important precondition for energy efficient urban planning. The aim of this study is to implement a micro-data method to estimate and compare CO2 emission induced by intra-urban car travelling to a retail destination of durable goods (DG), and non-durable goods (NDG). We estimate the emissions from aspects of travel behaviour and store location. The study is conducted by means of a case study in the city of Borlänge, where GPS tracking data on intra-urban car travel is collected from 250 households. We find that a behavioural change during a trip towards a CO2 optimal travelling by car has the potential to decrease emission to 36% (DG), and to 25% (NDG) of the emissions induced by car-travelling shopping trips today. There is also a potential of reducing CO2 emissions induced by intra-urban shopping trips due to poor location by 54%, and if the consumer selected the closest of 8 existing stores, the CO2 emissions would be reduced by 37% of the current emission induced by NDG shopping trips.
Resumo:
In order to explicate Murakami's version of the official culture, I have analyzed the novel with the works of several different theorists. Primarily, I drew my own understanding of the official culture from Raymond Williams's examination of culture in Marxism and Literature. His terminology became helpful in writing about the operation of the System and the Town, though it did not define that operation precisely. Williams's work also introduced me to the theory behind the official culture's manipulation and exclusion of historical aspects in order to create their "official" version of history, from which the official culture draws its identity. For further analysis of the treatment of history, I turned to Friedrich Nietzsche's On the Advantage and Disadvantage of History for Life. Though it examines the official culture's manipulation of history in a much more in-depth manner, it seems to have influenced Murakami's treatment of individual memories and cultural histories. For instance, the herd ofunicoms in the End of the World resembles Nietzsche's description of the ''unhistorical herd," or has the potential to resemble it. With these theories I was able to access the mechanisms of cultural control that Murakami depicts in the form of the System and the Town, and from there I was able to develop a model for how the narrator struggles to subvert that control. Both sides of that struggle are depicted and re-imagined many times throughout Hard-Boiled Wonderland and the End of the World.
Resumo:
Apesar de quase onipresente nos trabalhos de estratégia e áreas correlatas, o conceito de vantagem competitiva continua sendo um tema de debate na academia por não possuir uma definição aceita com consenso. Também o conceito de desvantagem competitiva, um correlato lógico deste primeiro, é objeto de acaloradas discussãoes. Uma manifestação disto é a discussão recente quanto aos fundamentos lógicos e filosóficos da idéia de Vantagem Competitiva levando o questionamento da própria existência deste conceito. O presente trabalho oferece uma proposta de definição constitutiva e operacional de vantagem competitiva que possibilita o desenvolvimento de uma métrica para a mesma. Esta métrica é aplicada em um trabalho empírico que mede a vantagem competitiva de 2805 empresas em 16 países com um total de 13.259 observações. O trabalho demonstra que a existência de vantagem competitiva não é um fato raro e que cerca de 10 a 12% das empresas analisadas apresentam uma vantagem competitiva estatisticamente significativa e outro tanto uma desvantagem competitiva igualmente significativa. Através desta proposta de Operacionalização do termo procuramos demonstrar a incidência e a relevância tanto da idéia de Vanatgem competitiva quanto de desvantagem competitiva.
Resumo:
Este trabalho objetiva analisar a eficiência dos comitês de investimento no modelo de investimento em private equity através de FIPs (Fundos de Investimento em Participações) que não utilizam alavancagens em suas aquisições. Tal análise é feita através de uma comparação com o modelo americano, no qual tipicamente o gestor do fundo tem o poder de decisão sobre os investimentos e as aquisições são realizadas utilizando financiamento de terceiros. A dissertação é iniciada com uma revisão bibliográfica não-exaustiva dos trabalhos da academia brasileira sobre o tema de private equity. Em seguida, levanta-se as particularidades do modelo dos FIPs, principalmente a decisão de investimento feita em conjunto pelo gestor e seus investidores através de comitês de investimento e a rara utilização de alavancagem nas aquisições, e demonstra-se como o impacto destas características altera o equilíbrio do modelo proposto por Axelson, Strömberg e Weisbach. Conclui-se que as particularidades do modelo dos FIPs que não utilizam alavancagens nas aquisições oferecem: (i) melhor proteção aos interesses dos investidores, e uma representativade similar aos conselhos de administração de companhias abertas, e (ii) permitem que o gestor aproveite os períodos nos quais as transações ocorrem a um múltiplo mais baixo, resultando num modelo mais eficiente de investimento e que evita a multiplicação dos ciclos econômicos. Tais conclusões, no entanto, estão sujeitas à observação das seguintes condições: (i) o comitê deve ter qualificação igual ou superior ao do gestor; (ii) o comitê deve ter disponibilidade de tempo e corpo suficientes para analisar os investimentos nas mesma profundidade que o gestor, (iii) a existência do comitê de investimento não deve acarretar numa desvantagem para o gestor em termos de agilidade de resposta nas negociações. Finalmente, são levantadas algumas situações de ponteciais conflitos de interesse nas quais os membros dos comitês de investimento podem se encontrar.
Resumo:
Esta dissertação tem como objetivo a identificação das vantagens e desvantagens da implementação de um sistema de remuneração por habilidades aplicada aos funcionários da área de produção do Consórcio de Alumínio do Maranhão. Os atores envolvidos na pesquisa foram os operadores da redução da Alumar, onde o sistema de remuneração por habilidades está implementado. A metodologia utilizada foi a descritiva e explicativa, descrevendo as características do sistema e com base na descrição, abordadas as vantagens e desvantagens da remuneração por habilidades. Os resultados desse estudo mostram vantagens para a implantação estruturada do sistema de remuneração por habilidades, dentre elas: o funcionário se sente mais responsável pela condução da sua carreira, a empresa passa a contar com funcionários muitifuncionais e os funcionários passam a ser mais preparados para a empresa e o mercado. Entre as desvantagens podemos citar as limitações e regras do sistema, que levam a uma lentidão do desenvolvimento da carreira dos funcionários, visto que eles estão mais preparados.
Resumo:
A presente pesquisa teve como finalidade investigar os efeitos da inequidade quando a pessoa é a vítima e a beneficiada na relação, bem como, verificar também a influência do autoconceito e da institucionalização nas reações e tipos de restaurações que são feitas nas situações inequitativas. Participaram do estudo 568 adolescentes, sendo 504 de colégios públicos e particulares e 64 da FUNABEM e FEEM. Os resultados mostraram que tanto os sujeitos na condição de vítima como na de beneficiado optam pelo tipo de restauração que busca anular a situação inequitativa. Porém, a percepção da injustiça é mais acurada para os que estão em desvantagem na relação. Na análise foram detectados, também, que os tipos de respostas que são buscadas para diminuir o desconforto advindo da inequidade parecem depender tanto das características de personalidade dos indivíduos -no caso o autoconceito -como de fatores institucionais.
Resumo:
Este trabalho se propõe a estudar a jurisdição constitucional sob a perspectiva pós-positivista com destaque para o controle de constitucionalidade concentrado. O pós-positivimo quebrou os paradigmas do direito constitucional clássico dando ao Poder Judiciário uma grande ascensão política realçando a dificuldade contramajoritária do controle de constitucionalidade concentrado. Ademais, as diversas manifestações da jurisdição constitucional que alijam o cidadão comum da Corte fazem do Supremo Tribunal Federal um tribunal isolado. As novas facetas do Poder Judiciário, especialmente do STF, têm gerado um déficit democrático na jurisdição constitucional. Este déficit democrático gera desequilíbrio entre as duas dimensões do Estado Democrático de Direito, onde a democracia se encontra em desvantagem em relação ao ideal constitucionalista. Na tentativa de diminuir o déficit democrático da jurisdição constitucional este trabalho se assenta sobre a importância de se reforçarem os instrumentos de participação social no controle de constitucionalidade concentrado: amicus curiae, audiências públicas e visitas in loco. Além de reequilibrar o Estado de Direito, o reforço desses instrumentos traz a racionalização das decisões em sede de controle concentrado, uma vez que promove uma troca de experiência entre o julgador e a realidade possibilitando a ele proferir decisões mais eficientes.
Resumo:
Compreender a variabilidade do desempenho entre as firmas e compreender o que leva a desempenhos acima da média e vantagem estão entre as principais questões no campo da estratégia empresarial. Vantagem competitiva é um construto de difícil operacionalização, por seu significado complexo, que dá margem a diferentes interpretações. Entretanto ela é apontada com freqüência como causadora de desempenho acima da média. A variabilidade do desempenho das empresas ao longo do tempo também é uma questão tratada com frequência, especialmente no que se trata dos níveis firma e setor. No entanto, a maior parte dos trabalhos empíricos no campo de estratégia dá apenas uma dimensão a essa variabilidade, estudando-a apenas em termos de média. Uma segunda dimensão, a tendência do desempenho, passa a ser considerada neste estudo, utilizado modelos multinível. Como o desempenho de uma firma evolui ao longo do tempo comporta assim, uma diferente análise, em termos de vantagem competitiva, desvantagem competitiva ou paridade. A comparação deste resultado com aqueles de desempenho médio tornou claro a importância de se analisar o desempenho em duas de suas dimensões: a média e sua tendência.
Resumo:
O estudo do fenômeno cluster, nos últimos 30 anos, sob inúmeras qualificações, tem atraído atenção crescente tanto do meio acadêmico quanto dos responsáveis pelo desenvolvimento de políticas públicas. No entanto, seu ciclo de desenvolvimento ainda é um aspecto pouco explorado. A necessidade em se investigar e compreender o ciclo de desenvolvimento dos clusters é destacada por vários autores. Do ponto de vista das políticas públicas, a importância em se identificar o ciclo de evolução dos clusters, bem como cada um de seus estágios, reside na assertividade das ações por elas proporcionada. A tese é apresentada na forma de três artigos científicos. O primeiro busca determinar a natureza e as dimensões da noção de cluster pela exploração das bases teórico-conceituais de três áreas de conhecimento em que o conceito é mais comumente empregado: a geografia econômica, a administração estratégica e a administração de operações. Além de outras descobertas, os resultados proporcionam uma classificação dos temas de pesquisa ao redor do conceito, bem como das linhas teórico-conceituais que os sustentam. O segundo lida com a questão de como os clusters são identificados. Partindo de algumas limitações das estatísticas da economia regional, em especial do Quociente Locacional (QL), o autor propõe uma abordagem de aplicação conjunta dessas estatísticas com aquelas apresentadas pela Análise Exploratória de Dados Espaciais (AEDE). Os resultados mostram a complementariedade das abordagens, pois parte das limitações da primeira consegue ser resolvida pela segunda, mas, mais importante, conseguem revelar o valor proporcionado pelas estatísticas da AEDE acerca da dinâmica regional. Por fim, o terceiro e último artigo propõe um instrumento de avaliação do ciclo de desenvolvimento dos clusters envolvendo 6 dimensões e 11 elementos de avaliação. A partir dos potenciais clusters identificados no segundo artigo, o instrumento é aplicado sobre três deles. O resultado é a obtenção de uma abordagem simples, conceitualmente coerente, prática e de baixo custo de aplicação.
Resumo:
Competitive Strategy literature predicts three different mechanisms of performance generation, thus distinguishing between firms that have competitive advantage, firms that have competitive disadvantage or firms that have neither. Nonetheless, previous works in the field have fitted a single normal distribution to model firm performance. Here, we develop a new approach that distinguishes among performance generating mechanisms and allows the identification of firms with competitive advantage or disadvantage. Theorizing on the positive feedback loops by which firms with competitive advantage have facilitated access to acquire new resources, we proposed a distribution we believe data on firm performance should follow. We illustrate our model by assessing its fit to data on firm performance, addressing its theoretical implications and comparing it to previous works.