Length of the Mitral Isthmus But Not Anatomical Location of Ablation Line Predicts Bidirectional Mitral Isthmus Block in Patients Undergoing Catheter Ablation of Persistent Atrial Fibrillation: A Randomized Controlled Trial.

INTRODUCTION: Mitral isthmus (MI) ablation is an effective option in patients undergoing ablation for persistent atrial fibrillation (AF). Achieving bidirectional conduction block across the MI is challenging, and predictors of MI ablation success remain incompletely understood. We sought to determine the impact of anatomical location of the ablation line on the efficacy of MI ablation. METHODS AND RESULTS: A total of 40 consecutive patients (87% male; 54 ± 10 years) undergoing stepwise AF ablation were included. MI ablation was performed in sinus rhythm. MI ablation was performed from the left inferior PV to either the posterior (group 1) or the anterolateral (group 2) mitral annulus depending on randomization. The length of the MI line (measured with the 3D mapping system) and the amplitude of the EGMs at 3 positions on the MI were measured in each patient. MI block was achieved in 14/19 (74%) patients in group 1 and 15/21 (71%) patients in group 2 (P = NS). Total MI radiofrequency time (18 ± 7 min vs. 17 ± 8 min; P = NS) was similar between groups. Patients with incomplete MI block had a longer MI length (34 ± 6 mm vs. 24 ± 5 mm; P < 0.001), a higher bipolar voltage along the MI (1.75 ± 0.74 mV vs. 1.05 ± 0.69 mV; P < 0.01), and a longer history of continuous AF (19 ± 17 months vs. 10 ± 10 months; P < 0.05). In multivariate analysis, decreased length of the MI was an independent predictor of successful MI block (OR 1.5; 95% CI 1.1-2.1; P < 0.05). CONCLUSIONS: Increased length but not anatomical location of the MI predicts failure to achieve bidirectional MI block during ablation of persistent AF.

Soft tissue artifact distribution on lower limbs during treadmill gait: Influence of skin markers' location on cluster design.

Segment poses and joint kinematics estimated from skin markers are highly affected by soft tissue artifact (STA) and its rigid motion component (STARM). While four marker-clusters could decrease the STA non-rigid motion during gait activity, other data, such as marker location or STARM patterns, would be crucial to compensate for STA in clinical gait analysis. The present study proposed 1) to devise a comprehensive average map illustrating the spatial distribution of STA for the lower limb during treadmill gait and 2) to analyze STARM from four marker-clusters assigned to areas extracted from spatial distribution. All experiments were realized using a stereophotogrammetric system to track the skin markers and a bi-plane fluoroscopic system to track the knee prosthesis. Computation of the spatial distribution of STA was realized on 19 subjects using 80 markers apposed on the lower limb. Three different areas were extracted from the distribution map of the thigh. The marker displacement reached a maximum of 24.9mm and 15.3mm in the proximal areas of thigh and shank, respectively. STARM was larger on thigh than the shank with RMS error in cluster orientations between 1.2° and 8.1°. The translation RMS errors were also large (3.0mm to 16.2mm). No marker-cluster correctly compensated for STARM. However, the coefficient of multiple correlations exhibited excellent scores between skin and bone kinematics, as well as for STARM between subjects. These correlations highlight dependencies between STARM and the kinematic components. This study provides new insights for modeling STARM for gait activity.

Effects of business-to-business customer orientation, satisfaction and retention on firm profitability

The objective of this master’s thesis was to examine the effect of customer orientation on customer satisfaction and how customer satisfaction and customer retention contribute to firm profitability. Beside customer orientation, also other antecedents of customer satisfaction, i.e. service quality, flexibility, trust and commitment, were investigated as control variables. Literature review revealed several research gaps concerning research of the key concepts. These research calls were also answered. The empirical study focused on one case company, a telecommunication expert. The data for the empirical part was collected with web-based questionnaire from case company’s business customers in January-February 2008. Sample (N=95) produced 59 answers, thus the response rate of the survey was 62,1%. The data was analyzed by using statistical analysis program, SPSS. As a conclusion, the results indicate that customer orientation do not affect customer satisfaction directly, but through service quality, flexibility and trust. Moreover, customer satisfaction has positive impacts on commitment and intentions to stay as a customer in the future, but not on profitability. In the present study, only past purchase behavior, measured with customer database measure, is positively related to firm profitability.

Optimizing Mobile Java Location-Based Services in Symbian OS

This thesis evaluates methods for obtaining high performance in applications running on the mobile Java platform. Based on the evaluated methods, an optimization was done to a Java extension API running on top the Symbian operating system. The API provides location-based services for mobile Java applications. As a part of this thesis, the JNI implementation in Symbian OS was also benchmarked. A benchmarking tool was implemented in the analysis phase in order to implement extensive performance test set. Based on the benchmark results, it was noted that the landmarks implementation of the API was performing very slowly with large amounts of data. The existing implementation proved to be very inconvenient for optimization because the early implementers did not take performance and design issues into consideration. A completely new architecture was implemented for the API in order to provide scalable landmark initialization and data extraction by using lazy initialization methods. Additionally, runtime memory consumption was also an important part of the optimization. The improvement proved to be very efficient based on the measurements after the optimization. Most of the common API use cases performed extremely well compared to the old implementation. Performance optimization is an important quality attribute of any piece of software especially in embedded mobile devices. Typically, projects get into trouble with performance because there are no clear performance targets and knowledge how to achieve them. Well-known guidelines and performance models help to achieve good overall performance in Java applications and programming interfaces.

Service Concept Development - An Appoach for Professional Service Firm

Specific demand for service concept creation has come about from industrial organizations’ desire to find new and innovative ways to differentiate their offering by increasing the level of customer services. Providers of professional services have also demanded new concepts and approaches for their businesses as these industries have become increasingly competitive. Firms are now seeking better ways to understand and segment their customers, to ensure the delivery of quality services and strengthen their position in aggressively competitive markets. This thesis is intended to provide management consulting companies with a new work method that enables service concept creation in a business-to-business environment. The model defines the service concept as a combination of delivered value and the target customers; the third-dimension operating model is brought to the new system in testing of the service concept creation guidelines in the target organization. For testing, service concepts for a management consulting company are created. Service concepts are designed to serve as a solid foundation for further service improvements. Recommendations and proposals for further action related to service development in the target organization are presented, and recommendations to further improve the model created are given.

Customer driven business model – connecting customer value to firm resources in ICT value networks

The objective of this thesis is to provide a business model framework that connects customer value to firm resources and explains the change logic of the business model. Strategic supply management and especially dynamic value network management as its scope, the dissertation is based on basic economic theories, transaction cost economics and the resource-based view. The main research question is how the changing customer values should be taken into account when planning business in a networked environment. The main question is divided into questions that form the basic research problems for the separate case studies presented in the five Publications. This research adopts the case study strategy, and the constructive research approach within it. The material consists of data from several Delphi panels and expert workshops, software pilot documents, company financial statements and information on investor relations on the companies’ web sites. The cases used in this study are a mobile multi-player game value network, smart phone and “Skype mobile” services, the business models of AOL, eBay, Google, Amazon and a telecom operator, a virtual city portal business system and a multi-play offering. The main contribution of this dissertation is bridging the gap between firm resources and customer value. This has been done by theorizing the business model concept and connecting it to both the resource-based view and customer value. This thesis contributes to the resource-based view, which deals with customer value and firm resources needed to deliver the value but has a gap in explaining how the customer value changes should be connected to the changes in key resources. This dissertation also provides tools and processes for analyzing the customer value preferences of ICT services, constructing and analyzing business models and business concept innovation and conducting resource analysis.

Subthalamic (STN) Deep Brain Stimulation (DBS) in Parkinson's Disease (PD): Correlation Between the Location of the Stimulated Contacts and the Clinical Effects in 14 Patients

Objectives: To correlate the chronic stimulated electrode position on postoperative MRI with the clinical response obtained in PD patients. Material and Method: We retrospectively reviewed 14 consecutive parkinsonian patients who were selected for STN-DBS surgery. Coordinates were determined on an IR T2 MRI coronal section per pendicular to AC-PC plane 3 mm posterior to midcommissural point (MCP) and 12 mm lateral to the midline the inferior aspect of subthalamic region. A CRW stereotactic frame was used for the surgical procedure. A 3D IR T2 MRI was performed postoperatively to determine the location of the stimulated contact in each patient. The clinical results were assessed independently by the neurological team. Results: All but 2 patients had monopolar stimulation. The mean coordinates of the stimulated contacts were: AP ^ ÿ4:23G1:4, Lat ^ 1:12G0:15, Vert ^ ÿ4:1 G2:7 to the MCP. With a mean follow-up of 8 months, all stimulated patients had a significant clinical improvement (preop/postop «ON» UPDRS: 25:8G7:0= 23:3 G8:6; preop/postop «OFF» UPDRS: 50:2G11:4=26:0 G7:8), 60% of them without any antiparkinsonian drug. Conclusion: According to the stereotactic atlas of Schaltenbrand and Warren and the 3D shape of the STN, our results show that our targetting is accurate and almost all the stimulated contacts are comprised in the STN volume. This indicates that MRI is a safe, precise and reproducible procedure for targetting the STN. The location of the stimulated contact within the STN volume is a good predictor of the clinical results.

A territorial approach to R&D subsidies: Empirical evidence for Catalonian firms

Using a database of 2,263 responses to R&D public calls in Catalonia, during the period 2007–2010, this paper proceeds to analyse the potential interaction of the territorial and policy dimensions with the propensity to apply for, and be awarded, a public R&D subsidy. Controlling for characteristics at the firm and project level, we estimate models using a two-step procedure. In the first step, our results suggest that large firms which export and which belong to high-tech manufactures are more likely to participate in a public R&D call. Furthermore, both urban location and past experience of such calls have a positive effect. Our territorial proxy of information spillovers shows a positive sign, but this is only significant at intra-industry level. Membership of one of the sectors prioritized by the Catalan government, perhaps surprisingly, does not have a significant impact. In the second step, our results show that cooperative projects, SMEs or old firms shows a positive effect on the probability of obtaining a public subsidy. Finally, the cluster policy does not show a clear relationship with the public R&D call, suggesting that cluster policies and R&D subsidies follow different goals. Our results are in line with previous results in the literature, but they highlight the unequal territorial distribution of the firms which apply and the fact that policymakers should interlink the decision criteria for their public call with other policies. Keywords: Evaluation, R&D policies, territorial approach, clusters JEL Classifications: L53, L25, O38

Expanding to institutionally different countries. Reasons, Firm International Experience, and Entry Mode Choice

We examine entry mode choice and its consequences when a multinational enterprise (MNE) expands into an institutionally different country. We argue that discussions of entry mode should distinguish between informal (e.g., culture) and formal (e.g., laws) institutions, and should take into account not just the home country of the MNE and its distance to the focal host country, but the MNE's overall footprint and experience across the world in general, especially in countries with an institutional structure that is similar to that of the focal host country. Specifically, we argue that firms with experience in countries with different informal institutions will be more likely to enter via acquisitions than firms without such experience, that such experience will not matter as much in the case of formal institutions, and that such firms will exit more quickly when they enter via equity alliances than through full acquisitions. We also distinguish between balanced and unbalanced alliances and argue that balanced alliances will be more enduring, but only when the host country is culturally (not legally) different from the other countries where the MNE has experience. Our arguments suggest that entry mode should be conditioned on a firm's experience in other markets, and that intercountry differences in formal versus informal institutions have distinct influences on entry mode.

Incumbent audit firm-provided tax services and the clients with low financial reporting quality

This study investigates whether incumbent audit firm-provided tax services enhance or impair the likelihood of acknowledging client companies’ low financial reporting quality. In particular, we examine the association between tax-related fees and the likelihood of timely restatements, and internal control weakness disclosures among a sample of US companies that all have misstatements in financial information. The empirical findings indicate that companies paying higher tax-related fees are less likely to disclose SOX 404 internal control weakness disclosures, implying that underlying control problems are unacknowledged when incumbent audit firm provided tax-related fees are higher. However, the findings suggest that just providing both audit and tax-related services does not have an impact on audit quality per se, but rather it is the magnitude of the tax-related fees in particular that counts. We also find some evidence suggesting that companies paying higher tax-related fees have higher likelihood of restatement lags, whereas companies paying smaller tax-related fees to their audit firm restate financial statements in a timelier manner. Overall, the findings suggest that audit scrutiny of client companies with low quality financial reporting is weaker when the magnitude of tax-related fees is higher.

Cooperation in R&D, firm size and type of partnership: Evidence for the Spanish automotive industry

This paper aims to analyse cooperation in R&D in the automobile industry in Spain. It first examines to what extent firms cooperate with external actors in the field of technological innovation, and if so, with what type of cooperation partner, paying special attention to the differentiation according to the size of the firms. Second, it aims to study how the firm’s size may affect not only the decision of cooperating but also with which type of partner, while controlling for other determinants that have been considered in the literature as main drivers of collaborative activities in R&D. We use data provided by the Technological Innovation Panel in the 2006-2008 period for firms in the automotive sector. We estimate a bivariate probit model that takes into account the two types of cooperation mostly present in the automotive industry, vertical and institutional, explicitly considering the interdependencies that may arise in the simultaneous choice of both.

Cooperation in R&D, firm size and type of partnership: Evidence for the Spanish automotive industry

This paper aims to analyse cooperation in R&D in the automobile industry in Spain. It first examines to what extent firms cooperate with external actors in the field of technological innovation, and if so, with what type of cooperation partner, paying special attention to the differentiation according to the size of the firms. Second, it aims to study how the firm’s size may affect not only the decision of cooperating but also with which type of partner, while controlling for other determinants that have been considered in the literature as main drivers of collaborative activities in R&D. We use data provided by the Technological Innovation Panel in the 2006-2008 period for firms in the automotive sector. We estimate a bivariate probit model that takes into account the two types of cooperation mostly present in the automotive industry, vertical and institutional, explicitly considering the interdependencies that may arise in the simultaneous choice of both.

Lamellarin D bioconjugates II: synthesis and cellular internalization of dendrimer and nuclear location signal derivatives

The design and synthesis of Lamellarin D conjugates with a nuclear localization signal peptide and a poly(ethylene glycol)-based dendrimer are described. Conjugates 1-4 were obtained in 8-84% overall yields from the corresponding protected Lamellarin D. Conjugates 1 and 4 are 1.4 to 3.3-fold more cytotoxic than the parent compound against three human tumor cell lines(MDA-MB-231 breast, A-549 lung, and HT-29 colon). Besides, conjugates 3, 4 showed a decrease in activity potency in BJ skin fibroblasts, a normal cell culture. Cellular internalization was analyzed and nuclear distribution pattern was observed for 4, which contains a nuclear localization signalling sequence.