Rheological characteristics of suwari and kamaboko gels made of surimi from Indian major carps

The gel strength, compressibility and folding characteristic of suwari (set) and kamaboko (set and cooked) gels prepared from rohu (Labeo rohita), catla (Catla catla) and mrigal (Cirrhinus mrigala) surimi were examined to understand the occurrence of suwari and modori phenomena in surimi from major freshwater carps. Suwari setting of gels did not take place at lower temperatures. Suwari gels showed good gel strength at 50 °C for rohu and at 60 °C for catla and mrigal after 30 min setting time. Incubation for 60 min decreased the gel strength at 60 °C for rohu and catla. Setting at 25 °C followed by cooking at 90 °C increased the gel strength. Increased setting temperature, however, decreased the gel strength of cooked gels. Gel strength and compressibility data were supported by folding characteristics.

Thermal Processing of Smoked Yellowfin Tuna (Thunnus albacares) in Flexible Pouches

This study is the first of its kind in India, where in smoked and thermal processed products have been developed using locally available wood as the source of wood smoke and flavoring and a shelf life of one year has been achieved. Retortable pouches of three layers, both imported and indigenous were found suitable to store thermal processed products. Heat penetration rate is quicker in retort pouches due to their thin profile in comparison to cans and hence the total process time is lesser. The nutritional and sensory attributes of the pouch products are better retained during processing. Hence these products are more acceptable than canned products. lndian vegetarian food products and fish curry products are available in the ready to eat form in the markets. Smoked and thermal processed products have not gained an entry to the market and hence this study will pave an opening for such products. Currently trade in tuna products from India is meager compared to the global trade. ln India proper utilization of tuna resources is yet to be achieved due to the lack of infrastructure for handling and knowledge of value addition. The raw material cost is also less due to the poor quality of the fish when landed. Hence, the availability of such products will help in the trade of tuna products, improving the quality of raw material landing and ultimately realizing a better value to the fishermen and processors.

Banana waste as substrate for a-amylase production by Bacillus subtilis (CBTK 106) under solid-state fermentation

Bacillus subtilis CBTK 106, isolated from banana wastes, produced high titres of a-amylase when banana fruit stalk was used as substrate in a solid-state fermentation system. The e¤ects of initial moisture content, particle size, cooking time and temperature, pH, incubation temperature, additional nutrients, inoculum size and incubation period on the production of a- amylase were characterised. A maximum yield of 5 345 000 U mg~1 min~1 was recorded when pretreated banana fruit stalk (autoclaved at 121 ¡C for 60 min) was used as substrate with 70% initial moisture content, 400 lm particle size, an initial pH of 7.0, a temperature of 35 ¡C, and additional nutrients (ammonium sulphate/sodium nitrate at 1.0%, beef extract/peptone at 0.5%, glucose/sucrose/starch/maltose at 0.1% and potassium chloride/sodium chloride at 1.0%) in the medium, with an inoculum-to-substrate ratio of 10% (v/w) for 24 h. The enzyme yield was 2.65-fold higher with banana fruit stalk medium compared to wheat bran

Development of ready-to-eat extruded fish based noodles in semi-rigid containers”

Fish and fishery products are having a unique place in global food market due to its unique taste and flavour; moreover, the presence of easily digestible proteins, lipids, vitamins and minerals make it a highly demanded food commodity.Fishery products constitute a major portion of international trade, which is a valuable source of foreign exchange to many developing countries.Several new technologies are emerging to produce various value added products from food; “extrusion technology” is one among them. Food extruder is a better choice for producing a wide variety of high value products at low volume because of its versatility. Extruded products are shelf-stable at ambient temperature. Extrusion cooking is used in the manufacture of food products such as ready-to-eat breakfast cereals, expanded snacks, pasta, fat-bread, soup and drink bases. The raw materialin the form of powder at ambient temperature is fed into extruder at a known feeding rate. The material first gets compacted and then softens and gelatinizes and/or melts to form a plasticized material, which flows downstream into extruder channel and the final quality of the end products depends on the characteristics of starch in the cereals and protein ingredient as affected by extrusion process. The advantages of extrusion process are the process is thermodynamically most efficient, high temperature short time enables destruction of bacteria and anti-nutritional factors, one step cooking process thereby minimizing wastage and destruction of fat hydrolyzing enzymes during extrusion process and enzymes associated with rancidity.

Nachhaltige Energie für ländliche Entwicklung in dem Sub-Sahara Afrika: interdisziplinäre Herangehensweise und organisatorische Herausforderung

Angesichts der Geschichte der Entwicklungspolitik, ist diese Arbeit darauf ausgerichtet, einige Beobachtungen in Bezug auf die so genannte Entwicklung hervorzuheben; insbesondere auf die andauernde prekäre Situation und Armut in ländlichen afrikanischen Gebieten. Armut ist nach Amartya SEN – weiter präzisiert von J.L. Dubois – die Deprivation von „Fähigkeiten“, die Individuen und lokale Gemeinschaften zu ausgeschlossenen und vergessenen Akteuren des Systems machen. Das nennt Paulo Freire, das Menschen zu „Objekten“ gemacht werden. Es rechtfertigt die starke Annahme, die in dieser Studie getroffen wird, dass vielmehr die Menschen als „Subjekte“ ihrer Veränderung und Entwicklung im Mittelpunkt stehen. Die Arbeit zeigt und erklärt in historischer Chronologie, wie die Entwicklungspolitiken und unterschiedliche Beteiligte auf allen Ebenen diese Situation verursachen. Trotz alledem bleiben die Individuen und lokalen Gemeinschaften, die in Symbiose mit ihrer natürlichen Umwelt leben, die reich an verschiedenen Ressourcen und Potentialen ist, als Reaktion darauf und gleichzeitig als Überlebensstrategie zutiefst verbunden mit dem, was sie vor Ort haben, womit sie eine tiefere und intensive Beziehung besitzen, wenn man von ihrer Geschichte, ihrer Kultur und der Handlungslogik ausgeht. Für externe Akteure, die sie über das vorhandene System dominieren und beeinflussen bleiben sie „Objekte“, aber in der Vielzahl ihrer endogenen Initiativen, zeigen sie die Fähigkeit und Substanz, die beweisen, dass sie auf ihrer Ebene das eigentliche Subjekt sind, die dynamischen Akteure. Aber isolierte Initiativen auf spezifische reale Bedürfnisse bei gleichzeitiger Dominierung durch das System mit seiner Marktlogik, führt dies langfristig nur zu dem Zirkulus Vitiosus der Armut. Daher ist eine ganzheitliche Sicht entscheidend für nachhaltige Entwicklung und für die notwendige Veränderung. Es geht nicht nur um die Veränderung des Systems und die Wahl politischer Maßnahmen, sondern genau genommen um das Verhalten der Akteure auf allen Ebenen und die Art der Beziehungen zwischen ihnen allen. Es ist eine Frage des erneuten Überdenkens des Entwicklungspfades, der andere Logik, Visionen, Interessen und Strategien aller Beteiligten, unserer so genannten Akteure einschließt. Ob dies von endogenen Initiativen oder neuen gemeinsamen Projekten ausgeht: man wird in einen Prozess kollektiven Lernens eintreten, den Paul Singer und Clarita Müller-Plantenberg erläutern und entwickeln in dem Konzept der Inkubation und Solidarischen Ökonomie, die Eigeninitiative, Selbstbestimmung und Selbstverwaltung von lokalen Gemeinschaften und die Öffnung für eine Neu-Konzeptualisierung und Institutionalisierung einschließt. So ein Prozess ist nur mit einem interdisziplinären Rahmen möglich. Dieser Rahmen soll auf einer zusätzlicher Kommunikation zwischen den Akteuren und Sozialwissenschaften beruhen und mit jenen, die auf dem Feld der Technologie arbeiten. So können dann technische „Experten“ angesichts eines technischen Projektfehlers, der aufgrund von bestimmten sozialen und kulturellen Realitäten zustande kam sagen, „es ist kein Scheitern ; es war ein Schritt innerhalb eines Lernprozesse der in die technischen Projekte und Studien einbezogen werden muss“. Wir haben das Energiethema gewählt; und insbesondere, Energie für eine nachhaltige ländliche Entwicklung in Subsahara-Afrika, um den Weg von der Theorie in die Praxis zu illustrieren und experimentell auszuprobieren, den Weg von den Beobachtungen zu der Veränderung, wobei Fragen, Annahmen, Strategien und konkrete Aktionen für den Wandel behandelt werden. Wir nennen unseren experimentellen Weg: DRIEE, das heißt auf Deutsch Ländliche Entwicklung und Inkubation von Energieunternehmen. Dabei gehen wir davon aus, dass: - Energie im Allgemeinen auf der internationalen Ebene fast gleichbedeutend mit Elektrizität ist. Heute bestehen die wichtigsten Bedürfnisse nach Energie dort wo die agro-pastorale Produktion, das Kochen, die Nahrungsmittelkonservierung und Verarbeitung …etc. stattfindet. - Diese ländliche Bevölkerung zu etwa 80% der nationalen Wirtschaft ausmacht. Dass sie gleichzeitig aber nur zu weniger als 5% der Energieproduktion Zugang hat, was oft auf Licht reduziert ist und nicht einmal ihrer Produktion zugute kommen kann. - Die Projekte für Energie und Elektrizität vor allem auf die Technologischen Fragen konzentriert sind und weniger auf die Bedürfnisse. Fast die Gesamtheit der Fonds für Energie wird in Bezug auf die Investitionen Infrastruktur der Produktion und Verteilung durch die konventionellen zentralisierten Netze geplant. Angesichts dieser Analysen gehen die in dieser Arbeit vorgenommenen Studien in Gambia und Kamerun von Bestandsaufnahmen und / oder beschreibenden regionalen Analysen aus: - von Bedürfnissen, von Praktiken und lokalen Initiativen von Fragen der Energie, für einzelne Professionen, Haushalte, Gruppen, spezifische Gruppen, wie Frauen, ländliche Gemeinden mit ihren spezifischen Charakteristika. - Von Potentialen: natürliche lokale Energieressourcen, soziokulturelle Ressourcen – so z.B. die empirisch feststellbaren menschliche Ressourcen wie endogenes Wissen und praktische organisatorische Fähigkeiten gegenüber den Problemen der Energie. Dieser experimentelle Schritt von Handlungsforschung (DRIEE) in Kamerun führte zu der Gründung einer Organisation, über die und mit der wir die Logik der Inkubation und Solidarischen Ökonomie einführen. Das ist FERDEDSI, das heißt auf Deutsch „Forum für Erneuerbare Energie – Nachhaltige Entwicklung und Internationale Solidarität“. Zunächst war dies eine Energiegenossenschaft und dann (im Prozess) wurde es zu einer institutionellen Nische von mehreren Mikro Initiativen in ländlichen Gebieten. FERDEDSI ist ein Prozess der Inkubation und ein Inkubator ist also gleichzeitig ein inkubiertes Energieunternehmen aber auch ein Inkubator für lokale Organisationen. Die ersten Aktionen finden in den Departments von Noun und Ménoua in der westlichen Provinz von Kamerun statt. Während der Forschungsperiode findet akademische Austausch statt (Nord-Süd und Süd-Süd), diese ist dabei zu formalen Partnerschaften zu werden, nicht nur zwischen Universitäten sondern genauer lokale Organisationen und Universitäten. Dieser letzte Typ von Partnerschaften, die die solidarische Ökonomie ausmachen ist auch eine Innovation des Prozesses für die afrikanischen Fälle, die dem Beispiel dessen, was in Lateinamerika geschieht, folgen. So kommt es zu gegenseitiger sinnvoller Ausbildung in den internationalen Arbeitsgruppen und Seminaren der Universität.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

Drinking water issues in Rural India: Need for stakeholders’ participation in Water resources management

Water is the very essential livelihood for mankind. The United Nations suggest that each person needs 20-50 litres of water a day to ensure basic needs of drinking, cooking and cleaning. It was also endorsed by the Indian National Water Policy 2002, with the provision that adequate safe drinking water facilities should be provided to the entire population both in urban and in rural areas. About 1.42 million rural habitations in India are affected by chemical contamination. The provision of clean drinking water has been given priority in the Constitution of India, in Article 47 conferring the duty of providing clean drinking water and improving public health standards to the State. Excessive dependence of ground water results in depletion of ground water, water contamination and water borne diseases. Thus, access to safe and reliable water supply is one of the serious concerns in rural water supply programme. Though government takes certain serious steps in addressing the drinking water issues in rural areas, still there is a huge gap between demand and supply. The Draft National Water Policy 2012 also states that Water quality and quantity are interlinked and need to be managed in an integrated manner and with Stakeholder participation. Water Resources Management aims at optimizing the available natural water flows, including surface water and groundwater, to satisfy competing needs. The World Bank also emphasizes on managing water resources, strengthening institutions, identifying and implementing measures of improving water governance and increasing the efficiency of water use. Therefore stakeholders’ participation is viewed important in managing water resources at different levels and range. This paper attempts to reflect up on portray the drinking water issues in rural India, and highlights the significance of Integrated Water Resource Management as the significant part of Millennium Development Goals, and Stakeholders’ participation in water resources management.

Meat yield and quality of Tanzania Shorthorn Zebu cattle finished on molasses/maize grain with agro-processing by-products in 90 days feedlot period

This study was conducted to evaluate the effects of feeding molasses or maize grain with agro-processing by-products on yield and quality of meat from Tanzania shorthorn zebu (TSZ) cattle. Forty five steers aged 2.5 to 3.0 years with 200 +/- 5.4 kg body weight were allocated into five dietary treatments namely hominy feed with molasses (HFMO), rice polishing with molasses (RPMO), hominy feed with maize meal (HFMM), rice polishing with maize meal (RPMM) and maize meal with molasses (MMMO). Ad libitum amount of each dietary treatment and hay were offered to nine steers for 90 days. Cooking loss (CL) and Warner Bratzler shear force (WBSF) values were determined on M. longissimus thoracis et lumborum aged for 3, 6, 9 and 12 days. Steers fed on HFMO diet had higher (P < 0.05) nutrient intake (86.39 MJ/d energy; 867 g/d CP), weight gain (919 g/d) and half carcass weight (75.8 kg) than those fed other diets. Meat of steers from all diets was tender with average WBSF values of 47.9 N cm^(−2). The CL (22.0 +/- 0.61%) and WBSF (53.4 +/- 0.70 N cm^(−2)) were highest in meat aged for 3 days followed by 6, 9 and 12 days. WBSF values for meat aged for 9 and 12 days from steers fed HFMO and RPMM diets were similar and lower than those on other dietary treatments x aging periods. Overall, molasses and hominy feed can be used to replace maize meal in feedlot finishing diets to spare its use in animal feeds.

Pizca de Azúcar

Este documento contiene el plan de emprendimiento de Pizca de Azúcar, empresa que se dedicará a prestar un servicio de entretenimiento por medio de Clases de Cocina, dando la opción a los consumidores de escoger tanto el menú como el lugar. La empresa cuenta con 4 productos que se dividen en clases a domicilio para grupos o individual y clases en la sede para grupos o individual.

¿ A qué sabe Colombia?

La identidad de un pueblo es posible reconocerla por variables como el idioma, el territorio y determinados símbolos. La cocina o la fabricación de alimentos, suele ser uno de los elementos que a primera vista identifica a una agrupación de personas y con la que estos sujetos reconocen su país o su nación. Sin embargo, en el caso colombiano la cultura culinaria y las cocinas tradicionales que se cree, representan la identidad del país, no se conocen como tal y no se reconoce el lugar que tienen como referente identitario nacional. Este documental lo invita a realizar una apasionante búsqueda culinaria donde recorrerá distintos caminos, cada uno con un sabor diferente. Expertos en alimentación, desde varios ámbitos, aportan su visión para intentar descubrir cuál es la identidad gastronómica del país. Para usted, ¿a qué sabe Colombia?

Determinantes sociales de la salud en Bogotá DC: el caso del acceso y calidad de los servicios 2003, 2007 y 2011

Bogotá D.C. es una ciudad de más de siete millones de habitantes en su mayoría de estrato medio, dividida políticamente por veinte localidades. Aquí se generan la mayoría de oportunidades de desarrollo y día a día llega la población fluctuante de otras ciudades de Colombia en busca de un mejor futuro. Las necesidades de la población en una metrópolis como ésta no se hacen esperar y la salud entendida, como un buen estado físico y mental, además de ser una necesidad humana primordial se ha convertido en uno de los temas más agobiantes para los ciudadanos y los creadores de políticas públicas en el Distrito Capital. Alcanzar un adecuado estado de salud no es solo cuestión de asegurar y dar cobertura de servicio, también se requiere que las diferentes políticas públicas que existen estén articuladas para llegar al deseado estado de salud. Estas políticas públicas son los mismos determinantes sociales de salud, por los cuales la Organización Mundial de la Salud (OMS) ha impartido la instrucción de incrementar esfuerzos con el fin de mejorar el estado de salud de la población mundial. En esta investigación se realiza un análisis del Índice de Condiciones de Vida, calculado por el DANE, en la Encuesta Calidad de Vida para Bogotá en 2003, 2007 y Encuesta Multipropósito 2011, estudiando el primer factor que hace parte de dicho índice, el Acceso y Calidad de los Servicios, el cual se compone por cuatro aspectos: i) Abastecimiento y calidad del agua, ii) Eliminación de excretas; iii) Recolección de basuras y iv) Combustible para cocinar. La revisión teórica que aborda a los determinantes sociales de la salud evidencia que estos cuatro componentes son fundamentales para garantizar el estado de salud de los bogotanos y hacen parte de los objetivos del milenio. Adicionalmente se realizan regresiones lineales para determinar el peso que ha tenido el factor acceso y calidad de los servicios, en el estado de salud de los bogotanos, definiendo el Índice de Condiciones de Vida como variable proxy al estado de salud, para cada uno de los años de estudio. Por último se presentan algunos datos de los resultados de las políticas públicas relacionadas con el acceso y calidad de los servicios de los gobiernos de la ciudad correspondientes a los años de estudio.

Sustain Cycle

En la búsqueda de preservar el medio ambiente y estandarizar la disposición final de los residuos generados, Sustain Cycle nace como un gestor de residuos de aceite vegetal usado, reforzando la carente oferta del mercado. Fortaleciendo el compromiso de los generadores de este residuo además de una reducción de costos, la creación de Sustain Cycle se desarrolla bajo la figura jurídica de Fundación, deduciendo en los contribuyentes del impuesto el valor de las donaciones efectuadas. El aporte ambiental se basa en minimizar el riesgo de una mala disposición en la red de alcantarillado y su componente social se enfoca en evitar la reutilización ilegal y perjudicial para el consumidor. Sustain Cycle se centra en la recolección, acopio, filtrado y comercialización del AVU generado por todos los establecimientos comerciales que produzcan alimentos como papas a la francesa, empanadas, buñuelos, churros, plátanos y demás productos que requieran del aceite para su cocción.

Magazine.

Se presenta una recopilación de unidades didácticas de Inglés para Educación Secundaria que reflejan las secciones de un magazine: moda (Fashion), consultorio sentimental (Agony Aunt Page), noticias (News), cocina (Cooking) y publicidad (Publicity). En cada unidad se especifican los objetivos didácticos, los contenidos, tanto conceptuales como procedimentales y actitudinales y los criterios de evaluación. Cada unidad se compone de varias lecciones y hojas de trabajo que incluyen actividades de comprensión oral y escrita.

Playing with computers, learning English. 'Jugando con ordenadores, aprendiendo inglés'.

Contiene: memoria final y 6 unidades didácticas: At the restaurant, at home, travelling, cooking is fantastic,out and about y the people i love. Premios concedidos a proyectos de innovación educativa en el curso 1996-1997. Anexo Memoria en C-Innov.45

Burnt offerings and harpies at Nasidienus’ dinner-party (Horace, Satires 2.8)

Horace's last Satire describes a disastrous dinner party hosted by the gourmet Nasidienus, which is ruined by a collapsing tapestry. The food served afterwards is presented in a dismembered state. This chapter argues that several elements of the scene recall the greedy Harpies of Apollonius' Argonautica, and that Horace's friend Virgil shows the influence of this Satire in his own Harpy-scene in Aeneid 3. It also argues that the confusion in the middle of the dinner causes the food cooking in the kitchen to be neglected and burned. This explains the state of the subsequent courses, which Nasidienus has salvaged from a separate disaster backstage.