Sensor data scheduling for linear quadratic Gaussian control with full state feedback

Networked control systems (NCSs) have attracted much attention in the past decade due to their many advantages and growing number of applications. Different than classic control systems, resources in NCSs, such as network bandwidth and communication energy, are often limited, which degrade the closed-loop system performance and may even cause the system to become unstable. Seeking a desired trade-off between the closed-loop system performance and the limited resources is thus one heated area of research. In this paper, we analyze the trade-off between the sensor-to-controller communication rate and the closed-loop system performance indexed by the conventional LQG control cost. We present and compare several sensor data schedules, and demonstrate that two event-based sensor data schedules provide better trade-off than an optimal offline schedule. Simulation examples are provided to illustrate the theories developed in the paper. © 2012 AACC American Automatic Control Council).

Magnetotransport in two-dimensional electron gas: The interplay between spin-orbit interaction and Zeeman splitting

We investigate theoretically the interplay between Zeeman splitting, Rashba spin-orbit interaction (RSOI), and Dresselhaus spin-orbit interaction (DSOI) and its influence on the magnetotransport property of two-dimensional electron gas (2DEG) at low temperature. Our theoretical results show that the nodes of the beating patterns of the magnetoresistivity rho(xx) for 2DEG with RSOI or DSOI alone depend sensitively on the total spin splitting induced by these three spin splitting mechanisms. It is interesting to find that the eigenstates in the presence of RSOI alone are connected with those in the presence of DSOI alone but with opposite Zeeman splitting by a time-reversal transformation. Consequently, the magnetoresistivities exhibit exactly the same oscillation patterns for these two cases. For strong RSOI or DSOI alone, the magneto-oscillation of rho(xx) shows two distinct periods. For 2DEG with both RSOI and DSOI, the beating patterns vanish for equal RSOI and DSOI strengths and vanishing Zeeman splitting. They will appear again, however, when Zeeman splitting or the difference between RSOI and DSOI strengths increases.

Increasingly ‘Irrational’ Party Systems: Evidence that There Are Increasingly More Than Two at the District level

Recent work has noted an increase in the number of parties at the national level in both proportional and majoritarian electoral systems. While the conventional wisdom maintains that the incentives provided by the electoral system will prevent the number of parties at the district level from exceeding two in majoritarian systems, the evidence presented here demonstrates otherwise. I argue that this has occurred because the number of cleavages articulated by parties has increased as several third parties have begun articulating cleavages that are not well represented by the two larger parties.

Automatic extruder for processing recycled polymers with ultrasound and temperature control system

Melt viscosity is one of the main factors affecting product quality in extrusion processes particularly with regard to recycled polymers. However, due to wide variability in the physical properties of recycled feedstock, it is difficult to maintain the melt viscosity during extrusion of polymer blends and obtain good quality product without generating scrap. This research investigates the application of ultrasound and temperature control in an automatic extruder controller, which has ability to maintain constant melt viscosity from variable recycled polymer feedstock during extrusion processing. An ultrasonic modulation system has been developed and fitted to the extruder prior to the die to convey ultrasonic energy from a high power ultrasonic generator to the polymer melt. Two separate control loops have been developed to run simultaneously in one controller: the first loop controls the ultrasonic energy or temperature to maintain constant die pressure, the second loop is used to control extruder screw speed to maintain constant throughput at the extruder die. Time response and energy consumption of the control methods in real-time experiments are also investigated and reported this paper.

A Reliability Assessment Approach For Integrated Transportation and Electrical Power Systems Incorporating Electric Vehicles

With the increasing utilization of electric vehicles (EVs), transportation systems and electrical power systems are becoming increasingly coupled. However, the interaction between these two kinds of systems are not well captured, especially from the perspective of transportation systems. This paper studies the reliability of integrated transportation and electrical power system (ITES). A bidirectional EV charging control strategy is first demonstrated to model the interaction between the two systems. Thereafter, a simplified transportation system model is developed, whose high efficiency makes the reliability assessment of the ITES realizable with an acceptable accuracy. Novel transportation system reliability indices are then defined from the view point of EV’s driver. Based on the charging control model and the transportation simulation method, a daily periodic quasi sequential reliability assessment method is proposed for the ITES system. Case studies based on RBTS system demonstrate that bidirectional charging controls of EVs will benefit the reliability of power systems, while decrease the reliability of EVs travelling. Also, the optimal control strategy can be obtained based on the proposed method. Finally, case studies are performed based on a large scale test system to verify the practicability of the proposed method.

On the application of optimal control techniques in lossy fieldbuses

The performance of real-time networks is under continuous improvement as a result of several trends in the digital world. However, these tendencies not only cause improvements, but also exacerbates a series of unideal aspects of real-time networks such as communication latency, jitter of the latency and packet drop rate. This Thesis focuses on the communication errors that appear on such realtime networks, from the point-of-view of automatic control. Specifically, it investigates the effects of packet drops in automatic control over fieldbuses, as well as the architectures and optimal techniques for their compensation. Firstly, a new approach to address the problems that rise in virtue of such packet drops, is proposed. This novel approach is based on the simultaneous transmission of several values in a single message. Such messages can be from sensor to controller, in which case they are comprised of several past sensor readings, or from controller to actuator in which case they are comprised of estimates of several future control values. A series of tests reveal the advantages of this approach. The above-explained approach is then expanded as to accommodate the techniques of contemporary optimal control. However, unlike the aforementioned approach, that deliberately does not send certain messages in order to make a more efficient use of network resources; in the second case, the techniques are used to reduce the effects of packet losses. After these two approaches that are based on data aggregation, it is also studied the optimal control in packet dropping fieldbuses, using generalized actuator output functions. This study ends with the development of a new optimal controller, as well as the function, among the generalized functions that dictate the actuator’s behaviour in the absence of a new control message, that leads to the optimal performance. The Thesis also presents a different line of research, related with the output oscillations that take place as a consequence of the use of classic co-design techniques of networked control. The proposed algorithm has the goal of allowing the execution of such classical co-design algorithms without causing an output oscillation that increases the value of the cost function. Such increases may, under certain circumstances, negate the advantages of the application of the classical co-design techniques. A yet another line of research, investigated algorithms, more efficient than contemporary ones, to generate task execution sequences that guarantee that at least a given number of activated jobs will be executed out of every set composed by a predetermined number of contiguous activations. This algorithm may, in the future, be applied to the generation of message transmission patterns in the above-mentioned techniques for the efficient use of network resources. The proposed task generation algorithm is better than its predecessors in the sense that it is capable of scheduling systems that cannot be scheduled by its predecessor algorithms. The Thesis also presents a mechanism that allows to perform multi-path routing in wireless sensor networks, while ensuring that no value will be counted in duplicate. Thereby, this technique improves the performance of wireless sensor networks, rendering them more suitable for control applications. As mentioned before, this Thesis is centered around techniques for the improvement of performance of distributed control systems in which several elements are connected through a fieldbus that may be subject to packet drops. The first three approaches are directly related to this topic, with the first two approaching the problem from an architectural standpoint, whereas the third one does so from more theoretical grounds. The fourth approach ensures that the approaches to this and similar problems that can be found in the literature that try to achieve goals similar to objectives of this Thesis, can do so without causing other problems that may invalidate the solutions in question. Then, the thesis presents an approach to the problem dealt with in it, which is centered in the efficient generation of the transmission patterns that are used in the aforementioned approaches.

Genetic programming and bacterial algorithm for neural networks and fuzzy systems design

In the field of control systems it is common to use techniques based on model adaptation to carry out control for plants for which mathematical analysis may be intricate. Increasing interest in biologically inspired learning algorithms for control techniques such as Artificial Neural Networks and Fuzzy Systems is in progress. In this line, this paper gives a perspective on the quality of results given by two different biologically connected learning algorithms for the design of B-spline neural networks (BNN) and fuzzy systems (FS). One approach used is the Genetic Programming (GP) for BNN design and the other is the Bacterial Evolutionary Algorithm (BEA) applied for fuzzy rule extraction. Also, the facility to incorporate a multi-objective approach to the GP algorithm is outlined, enabling the designer to obtain models more adequate for their intended use.

Stochastic short-term maintenance scheduling of GENCOs in an oligopolistic electricity market

In the proposed model, the independent system operator (ISO) provides the opportunity for maintenance outage rescheduling of generating units before each short-term (ST) time interval. Long-term (LT) scheduling for 1 or 2 years in advance is essential for the ISO and the generation companies (GENCOs) to decide their LT strategies; however, it is not possible to be exactly followed and requires slight adjustments. The Cournot-Nash equilibrium is used to characterize the decision-making procedure of an individual GENCO for ST intervals considering the effective coordination with LT plans. Random inputs, such as parameters of the demand function of loads, hourly demand during the following ST time interval and the expected generation pattern of the rivals, are included as scenarios in the stochastic mixed integer program defined to model the payoff-maximizing objective of a GENCO. Scenario reduction algorithms are used to deal with the computational burden. Two reliability test systems were chosen to illustrate the effectiveness of the proposed model for the ST decision-making process for future planned outages from the point of view of a GENCO.

Évaluation in silico des pompes d’assistance ventriculaire de type écoulement mixte

L'insuffisance cardiaque est une maladie à grande incidence dont le traitement définitif est difficile. Les pompes d'assistance ventriculaire ont été proposées comme thérapie alternative à long terme, mais la technologie est relativement jeune et selon son design, axial ou centrifuge, le dispositif favorise soit l'hémolyse, soit la stagnation de l'écoulement sanguin. Les pompes à écoulement mixte, combinant certaines propriétés des deux types, ont été proposées comme solution intermédiaire. Pour évaluer leurs performances, nous avons effectué des comparaisons numériques entre huit pompes, deux axiales, deux centrifuges, et quatre mixtes, en employant un modèle Windkessel du système cardiovasculaire avec paramètres optimisés pour l'insuffisance cardiaque résolu avec une méthode Radau IIA3, une méthode de résolution de système d'équations différentielles ordinaires L-stable appartenant à la famille des méthodes Runge-Kutta implicites. Nos résultats semblent suggérer que les pompes d'assistance mixtes ne démontrent qu'un léger avantage comparativement aux autres types en terme de performance optimale dans le cas de l'insuffisance cardiaque, mais il faudrait effectuer plus d'essais numériques avec un modèle plus complet, entre autres avec contrôles nerveux implémentés.

Immobilization of nitrifying bacterial consortia on wood particles for bioaugmenting nitrification in shrimp culture systems

Shrimp grow out systems under zero water exchange mode demand constant remediation of total ammonia nitrogen (TAN) andNO2 −–Nto protect the crop. To address this issue, aninexpensive and user-friendly technology using immobilized nitrifying bacterial consortia (NBC) as bioaugmentors has been developed and proposed for adoption in shrimp culture systems. Indigenous NBC stored at 4 °C were activated at room temperature (28 °C) and cultured in a 2 L bench top fermentor. The consortia, after enumeration by epifluorescence microscopy,were immobilized on delignifiedwood particles of a soft wood tree Ailantus altissima (300–1500 μm) having a surface area of 1.87m2 g−1. Selection of wood particle as substratumwas based on adsorption of NBC on to the particles, biofilm formation, and their subsequent nitrification potential. The immobilization could be achievedwithin 72 h with an initial cell density of 1×105 cells mL−1. On experimenting with the lowest dosage of 0.2 g (wet weight) immobilized NBC in 20 L seawater, a TAN removal rate of 2.4 mg L−1 within three days was observed. An NBC immobilization device could be developed for on site generation of the bioaugmentor preparation as per requirement. The product of immobilization never exhibited lag phase when transferred to fresh medium. The extent of nitrification in a simulated systemwas two times the rate observed in the control systems suggesting the efficacy in real life situations. The products of nitrification in all experiments were undetectable due to denitrifying potency, whichmade the NBC an ideal option for biological nitrogen removal. The immobilized NBC thus generated has been named TANOX (Total Ammonia Nitrogen Oxidizer)

Estado del arte del control en sistemas organizacionales y técnicos

La perdurabilidad empresarial es una de las preocupaciones sectoriales, regionales y nacionales estudiada desde diferentes ámbitos (económico, social y académico), convirtiéndose en uno de los objetivos multinivel que impulsa el desarrollo y crecimiento de un país. De otro lado, una de las metodologías que está orientada a garantizar el cumplimiento de los objetivos o comportamientos planificados se denomina “sistemas de control” cuya aplicación es interdisciplinaria, tiene su origen en los sistemas técnicos y se traslada a los sistemas organizacionales. Este trabajo desarrolla una revisión bibliográfica del control, desde la en los sistemas técnicos y desde la Psicología, Sociología y disciplinas sociales a los sistemas organizacionales, identificando dos corrientes. La primera corriente, denominada “clásica” en sistemas causales y la segunda, llamada “inteligente”. El trabajo describe en cada corriente la conceptualización, los propósitos, las metodologías, la estructura, la taxonomía y las críticas en los sistemas de control. El control es abordado con diferentes metodologías, dependiendo de la corriente y de la naturaleza de cada sistema, pero tiene un propósito transversal o interdisciplinario que consiste en generar comportamientos esperados o deseables en el sistema, incluyendo alcanzar objetivos establecidos. En cuanto al desarrollo y comprensión, hay un mayor avance en los sistemas técnicos enfocados básicamente hacia la autonomía del sistema, mientras que en los sistemas organizacionales se ha generado la inquietud de evolucionar o generar controles diferentes o eliminar el control, pero las organizaciones continúan aplicando los controles clásicos y generando resultados de no perdurabilidad empresarial.

Impacto de los factores interculturales en la implementación de un efectivo control de gestión en las organizaciones

Este trabajo pretende de una manera tanto teórica como práctica, estudiar la relación que pueda existir entre la interculturalidad y el Management Control System, para ello se realiza una revisión bibliográfica de los trabajos empíricos y teóricos desarrollados hasta el momento sobre el tema. Se comienza con la revisión de los diferentes conceptos que puedan hacer alusión a la interculturalidad, y los MCS (o contemple variables cercanas en relación a este), se delimita el tema y se procede a su clasificación hasta llegar a la estructuración de la definición de los constructos que integren los conceptos de interculturalidad y MCS. De igual manera, se operacionalizan las variables para poder generar un análisis practico utilizando estadística cuantitativa. Finalmente presentamos los resultados que demuestran el grado de importancia percibido por encuestados de filiales localizadas en diferentes países de Latino América de la empresa Agrocampo S.A.S, con el fin de presentar conclusiones que integren los dos temas de análisis.

Relación entre el desarrollo de sistemas de control de gestión y los recursos y capacidades caso : Teleperformance Colombia

Siguiendo un marco teórico integrado por varios autores entorno a los sistemas de control de gestión a lo largo de varias décadas, este trabajo pretende estudiar y contrastar la relación entre el desarrollo de dichos sistemas y los recursos y capacidades. Para tal fin, se desarrolló un estudio de caso en Teleperformance Colombia (TC), una empresa dedicada a prestación de servicio de tercerización de procesos o business process outsourcing. En el estudio se establecieron dos variables para evaluar el desarrollo de sistema de control de gestión: el diseño y el uso. A su vez, para cada uno de ellos, se definieron los indicadores y preguntas que permitieran realizar la observación y posterior análisis. De igual manera, se seleccionaron los recursos y capacidades más importantes para el desarrollo del negocio: innovación, aprendizaje organizacional y capital humano. Sobre estos se validó la existencia de relación con el SCG implementado en TC. La información obtenida fue analizada y contrastada a través de pruebas estadísticas ampliamente utilizadas en este tipo de estudios en las ciencias sociales. Finalmente, se analizaron seis posibles relaciones de las cuales, solamente se ratificó el relacionamiento positivo entre uso de sistema de control gestión y el recurso y capacidad capital humano. El resto de relacionamientos, refutaron los planteamientos teóricos que establecían cierta influencia de los sistemas de control de gestión sobre recursos y capacidades de innovación y aprendizaje organizacional.

New delay-dependent stability criteria for uncertain neutral systems with mixed time-varying delays and nonlinear perturbations

The problem of stability analysis for a class of neutral systems with mixed time-varying neutral, discrete and distributed delays and nonlinear parameter perturbations is addressed. By introducing a novel Lyapunov-Krasovskii functional and combining the descriptor model transformation, the Leibniz-Newton formula, some free-weighting matrices, and a suitable change of variables, new sufficient conditions are established for the stability of the considered system, which are neutral-delay-dependent, discrete-delay-range dependent, and distributeddelay-dependent. The conditions are presented in terms of linear matrix inequalities (LMIs) and can be efficiently solved using convex programming techniques. Two numerical examples are given to illustrate the efficiency of the proposed method

Control basat en lògica difusa per sistemes de fangs activats. Disseny, implementació i validació en EDAR reals

En aquesta tesi es presenten dues propostes de Sistemes de Control basats en Lògica Difusa (SCLD), des del seu disseny fins a la seva implementació i validació en dues instal·lacions: l'EDAR Granollers i l'EDAR Taradell. El capítol 1 explica els conceptes bàsics per comprendre el desenvolupament dels dos SCLD i el resum d'una revisió d'articles que relacionen la lògica difusa amb aigües residuals. A continuació, s'estableixen els objectius. En el capítol 3 es presenten els materials i mètodes. Els capítols 4 i 5 exposen el treball realitzat per arribar a la implementació dels dos SCLD. Ambdós capítols presenten la mateixa estructura: presentació, definició dels objectius del SCLD, descripció de l'EDAR on s'implementa el SCLD, desenvolupament d'índexs d'avaluació, explicació del disseny del SCLD i la seva avaluació mitjançant estudis de simulació, implementació i validació del SCLD a l'EDAR i, finalment discussió del treball realitzat. En el capítol 6 s'enumeren les conclusions obtingudes.