Dynamic properties of bright points in an active region

Context. Bright points (BPs) are small-scale, magnetic features ubiquitous across the solar surface. Previously, we have observed and noted their properties for quiet Sun regions. Here, we determine the dynamic properties of BPs using simultaneous quiet Sun and active region data.

Aims. The aim of this paper is to compare the properties of BPs in both active and quiet Sun regions and to determine any difference in the dynamics and general properties of BPs as a result of the varying magnetic activity within these two regions.

Methods. High spatial and temporal resolution G-band observations of active region AR11372 were obtained with the Rapid Oscillations in the Solar Atmosphere instrument at the Dunn Solar Telescope. Three subfields of varying polarity and magnetic flux density were selected with the aid of magnetograms obtained from the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory. Bright points within these subfields were subsequently tracked and analysed.

Results. It is found that BPs within active regions display attenuated velocity distributions with an average horizontal velocity of ~0.6 km s-1, compared to the quiet region which had an average velocity of 0.9 km s-1. Active region BPs are also ~21% larger than quiet region BPs and have longer average lifetimes (~132 s) than their quiet region counterparts (88 s). No preferential flow directions are observed within the active region subfields. The diffusion index (γ) is estimated at ~1.2 for the three regions.

Conclusions. We confirm that the dynamic properties of BPs arise predominately from convective motions. The presence of stronger field strengths within active regions is the likely reason behind the varying properties observed. We believe that larger amounts of magnetic flux will attenuate BP velocities by a combination of restricting motion within the intergranular lanes and by increasing the number of stagnation points produced by inhibited convection. Larger BPs are found in regions of higher magnetic flux density and we believe that lifetimes increase in active regions as the magnetic flux stabilises the BPs.

Distribution of terminal nerve entry points to the flexor and extensor groups of forearm muscles:An anatomical study

The motor points of the skeletal muscles, mainly of interest to anatomists and physiologists, have recently attracted much attention from researchers in the field of functional electrical stimulation. The muscle motor point has been defined as the entry point of the motor nerve branch into the epimysium of the muscle belly. Anatomists have pointed out that many muscles in the limbs have multiple motor points. Knowledge of the location of nerve branches and terminal nerve entry points facilitates the exact insertion and the suitable selection of the number of electrodes required for each muscle for functional electrical stimulation. The present work therefore aimed to describe the number, location, and distribution of motor points in the human forearm muscles to obtain optimal hand function in many clinical situations. Twenty three adult human cadaveric forearms were dissected. The numbers of primary nerves and motor points for each muscle were tabulated. The mean numbers and the standard deviation were calculated and grouped in tables. Data analyses were performed with the use of a statistical analysis package (SPSS 13.0). The proximal third of the muscle was the usual part of the muscle that received the motor points. Most of the forearm muscles were innervated from the lateral side and deep surface of the muscle. The information in this study may also be usefully applied in selective denervation procedures to balance muscles in spastic upper limbs. Copyright © 2007 Via Medica.

Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)

In this study, 39 sets of hard turning (HT) experimental trials were performed on a Mori-Seiki SL-25Y (4-axis) computer numerical controlled (CNC) lathe to study the effect of cutting parameters in influencing the machined surface roughness. In all the trials, AISI 4340 steel workpiece (hardened up to 69 HRC) was machined with a commercially available CBN insert (Warren Tooling Limited, UK) under dry conditions. The surface topography of the machined samples was examined by using a white light interferometer and a reconfirmation of measurement was done using a Form Talysurf. The machining outcome was used as an input to develop various regression models to predict the average machined surface roughness on this material. Three regression models - Multiple regression, Random Forest, and Quantile regression were applied to the experimental outcomes. To the best of the authors’ knowledge, this paper is the first to apply Random Forest or Quantile regression techniques to the machining domain. The performance of these models was compared to each other to ascertain how feed, depth of cut, and spindle speed affect surface roughness and finally to obtain a mathematical equation correlating these variables. It was concluded that the random forest regression model is a superior choice over multiple regression models for prediction of surface roughness during machining of AISI 4340 steel (69 HRC).

Parametric design optimization of hard turning of AISI 4340 steel (69 HRC)

Continuous research endeavors on hard turning (HT), both on machine tools and cutting tools, have made the previously reported daunting limits easily attainable in the modern scenario. This presents an opportunity for a systematic investigation on finding the current attainable limits of hard turning using a CNC turret lathe. Accordingly, this study aims to contribute to the existing literature by providing the latest experimental results of hard turning of AISI 4340 steel (69 HRC) using a CBN cutting tool. An orthogonal array was developed using a set of judiciously chosen cutting parameters. Subsequently, the longitudinal turning trials were carried out in accordance with a well-designed full factorial-based Taguchi matrix. The speculation indeed proved correct as a mirror finished optical quality machined surface (an average surface roughness value of 45 nm) was achieved by the conventional cutting method. Furthermore, Signal-to-noise (S/N) ratio analysis, Analysis of variance (ANOVA), and Multiple regression analysis were carried out on the experimental datasets to assert the dominance of each machining variable in dictating the machined surface roughness and to optimize the machining parameters. One of the key findings was that when feed rate during hard turning approaches very low (about 0.02mm/rev), it could alone be most significant (99.16%) parameter in influencing the machined surface roughness (Ra). This has, however also been shown that low feed rate results in high tool wear, so the selection of machining parameters for carrying out hard turning must be governed by a trade-off between the cost and quality considerations.

Turning Indium Oxide into a Superior Electrocatalyst:Deterministic Heteroatoms

The efficient electrocatalysts for many heterogeneous catalytic processes in energy conversion and storage systems must possess necessary surface active sites. Here we identify, from X-ray photoelectron spectroscopy and density functional theory calculations, that controlling charge density redistribution via the atomic-scale incorporation of heteroatoms is paramount to import surface active sites. We engineer the deterministic nitrogen atoms inserting the bulk material to preferentially expose active sites to turn the inactive material into a sufficient electrocatalyst. The excellent electrocatalytic activity of N-In2O3 nanocrystals leads to higher performance of dye-sensitized solar cells (DSCs) than the DSCs fabricated with Pt. The successful strategy provides the rational design of transforming abundant materials into high-efficient electrocatalysts. More importantly, the exciting discovery of turning the commonly used transparent conductive oxide (TCO) in DSCs into counter electrode material means that except for decreasing the cost, the device structure and processing techniques of DSCs can be simplified in future.

Challenges of managing medications for older people at transition points of care

In clinical practice, pharmacists play a very important role in identifying and correcting medication discrepancies as older patients move across transition points of care. With increasing complexity of health care needs of older people, these discrepancies are likely to increase. The major concern with identifying and correcting medication discrepancies is that medication reconciliation is considered a retrospective problem – that is, dealing with medication discrepancies after they have occurred. It is argued here that a more proactive stance should be taken where doctors, nurses and pharmacists collectively work together to prevent medication discrepancies from happening in the first place. Improved involvement of patients and family members will help to facilitate better management of medications across transition points of care. Efficient use of information technology aids, such as electronic medication reconciliation tools, should also assist with organizational systems problems associated with the working culture, heavy workloads, and staff and skill mix of health professionals.

Minimal residual disease detection in childhood acute lymphoblastic leukaemia patients at multiple time-points reveals high levels of concordance between molecular and immunophenotypic approaches

In this single centre study of childhood acute lymphoblastic leukaemia (ALL) patients treated on the Medical Research Council UKALL 97/99 protocols, it was determined that minimal residual disease (MRD) detected by real time quantitative polymerase chain reaction (RQ-PCR) and 3-colour flow cytometry (FC) displayed high levels of qualitative concordance when evaluated at multiple time-points during treatment (93.38%), and a combined use of both approaches allowed a multi time-point evaluation of MRD kinetics for 90% (53/59) of the initial cohort. At diagnosis, MRD markers with sensitivity of at least 0.01% were identified by RQ-PCR detection of fusion gene transcripts, IGH/TRG rearrangements, and FC. Using a combined RQ-PCR and FC approach, the evaluation of 367 follow-up BM samples revealed that the detection of MRD >1% at Day 15 (P = 0.04), >0.01% at the end of induction (P = 0.02), >0.01% at the end of consolidation (P = 0.01), >0.01% prior to the first delayed intensification (P = 0.01), and >0.1% prior to the second delayed intensification and continued maintenance (P = 0.001) were all associated with relapse and, based on early time-points (end of induction and consolidation) a significant log-rank trend (P = 0.0091) was noted between survival curves for patients stratified into high, intermediate and low-risk MRD groups.

POINTS OF VIEW: Multi-Roling Performance in Ireland in the 1990s, Part 1 (Layering)

This series of posts will consider the acting techniques required for this style of performance with reference to four productions from the 1990s in which two actors took on multiple roles: Frank Pig Says Hello (1992), Co-Motion’s stage adaptation of Pat McCabe’s novel; The Butcher Boy, Corca Dorca’s production of Disco Pigs (1996) by Enda Walsh; DubbleJoint’s production of Stones in his Pockets by Marie Jones (1996) and its subsequent award-winning revival which I produced at Belfast’s Lyric Theatre in 1999; and Kabosh’s production of Mojo Mickybo by Owen McCafferty (1998). The discussion will focus primarily on my own empirical exploration of the demands multi-roling places on an actor through the direction of recent revivals of Mojo Mickybo for Belfast’s Chatterbox Theatre Company (2013) and Bedlam Productions (2015).

Clinical end points for drug treatment trials in BCR-ABL1-negative classic myeloproliferative neoplasms: consensus statements from European LeukemiaNET (ELN) and Internation Working Group-Myeloproliferative Neoplasms Research and Treatment (IWG-MRT)

The discovery of somatic mutations, primarily JAK2V617F and CALR, in classic BCR-ABL1-negative myeloproliferative neoplasms (MPNs) has generated interest in the development of molecularly targeted therapies, whose accurate assessment requires a standardized framework. A working group, comprised of members from European LeukemiaNet (ELN) and International Working Group for MPN Research and Treatment (IWG-MRT), prepared consensus-based recommendations regarding trial design, patient selection and definition of relevant end points. Accordingly, a response able to capture the long-term effect of the drug should be selected as the end point of phase II trials aimed at developing new drugs for MPNs. A time-to-event, such as overall survival, or progression-free survival or both, as co-primary end points, should measure efficacy in phase III studies. New drugs should be tested for preventing disease progression in myelofibrosis patients with early disease in randomized studies, and a time to event, such as progression-free or event-free survival should be the primary end point. Phase III trials aimed at preventing vascular events in polycythemia vera and essential thrombocythemia should be based on a selection of the target population based on new prognostic factors, including JAK2 mutation. In conclusion, we recommended a format for clinical trials in MPNs that facilitates communication between academic investigators, regulatory agencies and drug companies.

POINTS OF VIEW: Multi-Roling Performance in Ireland in the 1990s, Part 2 (Characterisation)

The 1990s in Ireland saw a series of highly successful theatre productions in which actors played a multiplicity of roles. This has often been attributed to the economic exigencies of the times, but it also depended on the availability of flexible actors with the physical and psychological capacity to embody a wide range of identifiable characters within the one production.

This second of two posts considers the acting techniques required for this style of performance in relation to the differentiation of one character from another. The discussion will focus primarily on my own empirical exploration of the demands multi-roling places on an actor through the direction of recent revivals of Mojo Mickybo for Belfast’s Chatterbox Theatre Company (2013) and Bedlam Productions (2015).

Optimal control and numerical optimization applied to epidemiological models

A relação entre a epidemiologia, a modelação matemática e as ferramentas computacionais permite construir e testar teorias sobre o desenvolvimento e combate de uma doença. Esta tese tem como motivação o estudo de modelos epidemiológicos aplicados a doenças infeciosas numa perspetiva de Controlo Ótimo, dando particular relevância ao Dengue. Sendo uma doença tropical e subtropical transmitida por mosquitos, afecta cerca de 100 milhões de pessoas por ano, e é considerada pela Organização Mundial de Saúde como uma grande preocupação para a saúde pública. Os modelos matemáticos desenvolvidos e testados neste trabalho, baseiam-se em equações diferenciais ordinárias que descrevem a dinâmica subjacente à doença nomeadamente a interação entre humanos e mosquitos. É feito um estudo analítico dos mesmos relativamente aos pontos de equilíbrio, sua estabilidade e número básico de reprodução. A propagação do Dengue pode ser atenuada através de medidas de controlo do vetor transmissor, tais como o uso de inseticidas específicos e campanhas educacionais. Como o desenvolvimento de uma potencial vacina tem sido uma aposta mundial recente, são propostos modelos baseados na simulação de um hipotético processo de vacinação numa população. Tendo por base a teoria de Controlo Ótimo, são analisadas as estratégias ótimas para o uso destes controlos e respetivas repercussões na redução/erradicação da doença aquando de um surto na população, considerando uma abordagem bioeconómica. Os problemas formulados são resolvidos numericamente usando métodos diretos e indiretos. Os primeiros discretizam o problema reformulando-o num problema de optimização não linear. Os métodos indiretos usam o Princípio do Máximo de Pontryagin como condição necessária para encontrar a curva ótima para o respetivo controlo. Nestas duas estratégias utilizam-se vários pacotes de software numérico. Ao longo deste trabalho, houve sempre um compromisso entre o realismo dos modelos epidemiológicos e a sua tratabilidade em termos matemáticos.