Application of solid sampling device for direct determination of chromium and nickel in lubricating oils by graphite furnace atomic absorption spectrometry

One method using a solid sampling device for the direct determination of Cr and Ni in fresh and used lubricating oils by graphite furnace atomic absorption spectrometry are proposed. The high organic content in the samples was minimized using a digestion step at 400 degrees C in combination with an oxidant mixture 1.0% (v v(-1)) HNO3+15% (v v(-1)) H2O2+0.1% (m v(-1)) Triton X-100 for the in situ digestion. The 3-field mode Zeeman-effect allowed the spectrometer calibration up to 5 ng of Cr and Ni. The quantification limits were 0.86 mu g g(-1) for Cr and 0.82 mg g(-1) for Ni, respectively. The analysis of reference materials showed no statistically significant difference between the recommended values and those obtained by the proposed methods.

Gelatin-based protonic electrolyte for electrochromic windows

Proton-conducting gel polymer electrolytes based on gelatin plasticized with glycerol and containing acetic acid were investigated, characterized, and applied to electrochromic window. For glycerol contents varying from 7% to 48%, the conductivity of the uniform and predominantly amorphous gel electrolyte was found to follow a Vogel-Tamman-Fulcher behavior with the temperature. Typically, for the electrolyte chosen to make 7 x 2 cm(2) electrochromic smart window with the configuration: glass/fluor-doped tin oxide (FTO)/WO(3)/gelatin electrolyte/CeO(2)-TiO(2)/FTO/glass and containing 28% of glycerol, the conductivities were found to be of the order of 5 x 10(-5) S/cm at room temperature and 3.6 x 10(-4) S/cm at 80 A degrees C. The device was characterized by spectroelectrochemical techniques and was tested up to 10,000 cycles showing a fast coloring/bleaching behavior, where the coloring process was achieved in 10 s and the bleaching in 2 s. The transmission variation at the wavelength of 550 nm was about 15%. The cyclic voltammograms showed a very good reversibility of the cathodic/anodic processes, and the charge density was about 3.5 mC/cm(2). The memory tests showed that the transmittance in the colored state increased by 8% in 90 min after removing the potential.

Opening the Windows of the Church to the World: The Creation of Nostra Aetate and Its Impact on the Christian-Jewish relationship

It is important to assert that this study is not a work to inflict guilt on the Catholics or Catholicism for their silence and indifference during the Holocaust. Instead, this study is about the process of moving on from the Catholic Church's past to where the Jewish community's theological existence was finally recognized and the Jewish people were no longer seen as the Others who killed Christ. This was, achieved through a church declaration titled Nostra Aetate (In Our Time). This study records the journey traversed by this declaration, the insurmountable odds it faced in its creation until its promulgation and the impact it has on the Jewish-Christian relationship.

Adaptive, Decentralized, And Real-Time Sampling Strategies For Resource Constrained Hydraulic And Hydrologic Sensor Networks

We discuss the development and performance of a low-power sensor node (hardware, software and algorithms) that autonomously controls the sampling interval of a suite of sensors based on local state estimates and future predictions of water flow. The problem is motivated by the need to accurately reconstruct abrupt state changes in urban watersheds and stormwater systems. Presently, the detection of these events is limited by the temporal resolution of sensor data. It is often infeasible, however, to increase measurement frequency due to energy and sampling constraints. This is particularly true for real-time water quality measurements, where sampling frequency is limited by reagent availability, sensor power consumption, and, in the case of automated samplers, the number of available sample containers. These constraints pose a significant barrier to the ubiquitous and cost effective instrumentation of large hydraulic and hydrologic systems. Each of our sensor nodes is equipped with a low-power microcontroller and a wireless module to take advantage of urban cellular coverage. The node persistently updates a local, embedded model of flow conditions while IP-connectivity permits each node to continually query public weather servers for hourly precipitation forecasts. The sampling frequency is then adjusted to increase the likelihood of capturing abrupt changes in a sensor signal, such as the rise in the hydrograph – an event that is often difficult to capture through traditional sampling techniques. Our architecture forms an embedded processing chain, leveraging local computational resources to assess uncertainty by analyzing data as it is collected. A network is presently being deployed in an urban watershed in Michigan and initial results indicate that the system accurately reconstructs signals of interest while significantly reducing energy consumption and the use of sampling resources. We also expand our analysis by discussing the role of this approach for the efficient real-time measurement of stormwater systems.

Convex combinations of long memory estimates from different sampling rates

Convex combinations of long memory estimates using the same data observed at different sampling rates can decrease the standard deviation of the estimates, at the cost of inducing a slight bias. The convex combination of such estimates requires a preliminary correction for the bias observed at lower sampling rates, reported by Souza and Smith (2002). Through Monte Carlo simulations, we investigate the bias and the standard deviation of the combined estimates, as well as the root mean squared error (RMSE), which takes both into account. While comparing the results of standard methods and their combined versions, the latter achieve lower RMSE, for the two semi-parametric estimators under study (by about 30% on average for ARFIMA(0,d,0) series).

Convergence analysis of sampling-based decomposition methods for risk-averse multistage stochastic convex programs

We consider a class of sampling-based decomposition methods to solve risk-averse multistage stochastic convex programs. We prove a formula for the computation of the cuts necessary to build the outer linearizations of the recourse functions. This formula can be used to obtain an efficient implementation of Stochastic Dual Dynamic Programming applied to convex nonlinear problems. We prove the almost sure convergence of these decomposition methods when the relatively complete recourse assumption holds. We also prove the almost sure convergence of these algorithms when applied to risk-averse multistage stochastic linear programs that do not satisfy the relatively complete recourse assumption. The analysis is first done assuming the underlying stochastic process is interstage independent and discrete, with a finite set of possible realizations at each stage. We then indicate two ways of extending the methods and convergence analysis to the case when the process is interstage dependent.

Windows of opportunities and knowledge networks: implications for the catch-up in developing countries

This document represents a doctoral thesis held under the Brazilian School of Public and Business Administration of Getulio Vargas Foundation (EBAPE/FGV), developed through the elaboration of three articles. The research that resulted in the articles is within the scope of the project entitled “Windows of opportunities and knowledge networks: implications for catch-up in developing countries”, funded by Support Programme for Research and Academic Production of Faculty (ProPesquisa) of Brazilian School of Public and Business Administration (EBAPE) of Getulio Vargas Foundation.

Extraindo áudio de um CD com Windows Media Player

O professor, sentado diante de um computador, explica como os alunos devem proceder para extrair áudio de um CD para arquivos do computador utilizando o software Windows Media Player. São alternadas imagens do professor falando e da tela do computador onde ele realiza uma demonstração da atividade em questão. Após extrair uma música do CD, o professor abre o arquivo de áudio no software Audacity para visualizar a representação gráfica das ondas sonoras da música.

Auto-eficácia de alunos de administração: um estudo com concluintes do curso de graduação em Administração no Estado do Pará

The current study presents the characteristics of self-efficacy of students of Administration course, who work and do not work. The study was conducted through a field research, descriptive, addressed quantitatively using statistical procedures. Was studied a population composed of 394 students distributed in three Higher Education Institutions, in the metropolitan region of Belém, in the State of Pará. The sampling was not probabilistic by accessibility, with a sample of 254 subjects. The instrument for data collection was a questionnaire composed of a set of questions divided into three sections: the first related to sociodemographic data, the second section was built to identify the work situation of the respondent and the third section was built with issues related to General Perceived Self-Efficacy Scale proposed by Schwarzer and Jerusalem (1999). Sociodemographic data were processed using methods of descriptive statistics. This procedure allowed characterizing the subjects of the sample. To identify the work situation, the analysis of frequency and percentage was used, which allowed to classify in percentage, the respondents who worked and those that did not work, and the data related to the scale of self-efficacy were processed quantitatively by the method of multivariate statistics using the software of program Statistical Package for Social Sciences for Windows - SPSS, version 17 from the process of Exploratory Factor Analysis. This procedure allowed characterizing the students who worked and the students who did not worked. The results were discussed based on Social Cognitive Theory from the construct of self-efficacy of Albert Bandura (1977). The study results showed a young sample, composed the majority of single women with work experience, and indicated that the characteristics of self-efficacy of students who work and students who do not work are different. The self-efficacy beliefs of students who do not work are based on psychological expectations, whereas the students who work demonstrated that their efficacy beliefs are sustained by previous experiences. A student who does not work proved to be reliant in their abilities to achieve a successful performance in their activities, believing it to be easy to achieve your goals and to face difficult situations at work, simply by invest a necessary effort and trust in their abilities. One who has experience working proved to be reliant in their abilities to conduct courses of action, although know that it is not easy to achieve your goals, and in unexpected situations showed its ability to solve difficult problems