The study of biological characteristics and determination of population dynamic parameters of sawtooth barracuda (Sphyraena putnamae) in the Persian Gulf (Hormozgun Province waters)

The biological characteristics and population dynamisms of Sphyraena putnamae, were studied in the northern Persian Gulf and Oman Sea restricted to Hormuzgan province waters within 13 months period, from November 2006 up to November 2007. Biometrical and anatomical measurements were carried out, and biological surveys were conducted on 486 specimens. On the other hand, the growth and mortality parameters were estimated by using 3096 samples. These samples were collected from 3 landings, namely Bandar Abbas, Bandar Lengeh and Bandar Jask. The measurements of the minimum and maximum Fork lengths and weights were 11.7 to 8.03 cm and 135.0 to 4140.0 g, respectively. The results indicated that this species, having the Relative Length of Gut, RLG=0.34±0.002, is strongly carnivorous (often fish-eater), proven by the fact that more than 98% of its stomach contents were fish pieces. Examining the changes in the index of stomach emptiness by the percentage of CV = 0.47% indicates that this fish is Moderate feeder. The level of feeding increased in March, before spawning and decreased in June and September, simultaneously with the spawning season. There are 2 peaks of reproduction or spawning seasons during the months of April-May and September, of which the prior is assumed as the main spawning. The sex ratio (M:F) was calculated 0.5:1.0(X2 =2.11), which did not show a significant difference with expected level of 1:1 (P>0.05). The average absolute and relative reproduction rates of Sphyraena putnamae is respectively as follows: 1866827.1±255448.9 and 1097.7±94.3. The highest and the lowest diameter of matured egg are from 200 to 750 μ, and its average diameter is 402.10 ± 0.190 μ. A parameter for Saw-tooth barracuda length measurement, Lm50, based on the Fork-length, was calculated as 54.01 cm. In other words, as far as the fisheries management is concerned, the fish whose lengths are less than 54.01 cm should not be caught. The calculated level of (R2) (correlations of total length & weight), indicated strong correlations between length and weight of this fish, and the obtained formula included W =0.007100 FL 2.9295 and reinforced this assumption. The “K” Index for this fish in 3 above mentioned landings (Jask, Bandar-Abbas and Bandar-Length) were 1.24, 0.37 and 0.46 per year, respectively and the FL index for the same landings were estimated as 129, 110 and 134 cm, respectively. The growth coefficient (MONRO) for the above mentioned regions were calculated as 3.601, 3.647 and 3.917, respectively; and in the surveyed regions there were no significant differences in populations. The Total mortality coefficient (Z) was calculated 0.76, 1.12 and 1.07 per year, the Natural mortality coefficient was 0.46, 0.63 and 0.70, and the Fishing mortality coefficient (rate) (F) was found to be 0.30, 0.49 and 0.37 per year. The value of the exploitation rate (E) is equal to 0.39 per year, indicating that this species is an under-exploited resource, and there is no excessive fishing pressure on the fish supply of this species in the afore-said regions. The highest level of exploitation was found for ‘Bandar Abbas’ fishing region and the lowest level of exploitation is in ‘Bandar Lengeh’ waters.

Study on biological characteristics, sexual maturation and reproduction of Liza abu in the water of Khozestan Province

As the most of the fish resources are known and exploited, protecting their generation is of the greatest importance. Aquaculture is one of the efficient procedures in protecting and reviving fish resources and knowing about the reproductive cycle and gonads development has an important role in approaching this aim. Liza abu belongs to the family Mugilidae that according to its resistance to the environmental condition and its fast growth , can be introduced as a fish with economical value. As there is no scientific data on the reproductive biology of this species , study on the reproductive biology and gonad development is considered as the aim of this research . For this purpose , 360 samples of this species were investigated during the period from February 2007 to January 2008 in Khozestan Province . After studing morphological and histological characteristics of gonad specimen , they were prepared through histological method. Samples were prepared through usual histological method and studied under light microscope. According to the results, the maturity stages of male and female Liza abu were separated to six different successive stages. In ovaries , these stages were as follow : In stage І, the oocytes were small , this stage was observed from July to October . In stage ІІ, considerable growth was observed in the oocytes . This stage was observed from October to January . In stage III, due to vitellogenesis, the maximum growth was observed and three layers of theca, granullosa and follicle cells were visible. This stage was observed during January and February . In stage IV, migration of germinal vesicle was observed and due to hydration of the oocytes , their diameter was increased. The ovaries were yellowish and in maximum size and ovules could be easily observed with naked-eye . This stage was observed in February and March . In stage V, spawning occured. This stage was observed in April . In stage VI, ovaries consisted of immature and atretic oocytes and also empty follicles. This stage was observed in May and June. In testes , these stages were as follow : In stage I , the testes were small in size and contained the spermatogonia which were the only cellular components.This stage was observed in August and September . In stage II (maturing virgin ) , the spermatogonia and the primary spermatocytes were visible. This stage was observed in October . In stage III (developing), intensive spermatogenesis was occured and the primary and the secondary spermatocytes were the most visible cells during this stage .This stage was observed from November to January. In stage IV(developed), cells of all stages of spermatogenesis could be seen but the secondary spermatocytes and spermatids were in large number. This stage was observed from January to March. In stage V , the testes were filled with sperms. This stage was observed in March and April .In stage VI, residual spermatozoa and the spermatogonia were visible in the testes. This stage was observed from May to August. According to cyclic changes in GSI, sexual maturation in breeding begins in January and spawning occurs in April. The ova diameter ranged from 30.75 μ in stage I to 472.19 μ in stage IV. In this study , the sex ratio was 1:2.7, and male and female percentage were 27.02% and 72.98% respectively. This means that females predominate males. In this study absolute fecundity was calculated and changing between 30805.44 to 431247.3 was observed and absolute fecundity was calculated 111275.3 in average.

Study biological characteristics related with development and reproduction in Barbus capito on the southern coast of the Caspian Sea, Gilan Province

In the present research, a total of 207 pieces of fish from 25 sampling stations in Gilan Province coasts in the years 2001-2002 were biologically studied in terms of their growth and development, reproduction and feeding. The average length and weight of the fishes are increased, as they get older. The highest index of length and weight growth is observed in the years 1 to 2. As the age increases, gradient of length and weight growth diagrams decrease. In studying the relation between length and weight, it was observed that proportionate to the total length, the weight is increased progressively. The fatness coefficient index in the initial years of life and prior to maturity is higher than the post maturity period. As the age increases, the decrease of this index is observable. The fatness coefficient index rate is directly related to index of fullness. The highest Gonadosomatic Index is seen in the months of June and July, i.e. at the times of spawning; and the lowest index rate is observed in the months of November and December. The appropriate temperature for reproduction of these species is from 18 to 22 degree centigrade. The Gonadosomatic Index is higher in spring and summer seasons as compared with autumn and winter. Besides, as the fishes become aged, the amount of the said index increases in a manner that the gradient of it in the years to maturity is less than the maturity time and thereafter. Sexual maturity stages in different months are directly related to Gonadosomatic index, and increase as the age increases. The sexual ratio of male fishes to the female fishes in terms of number is plus one prior to maturity; about one at the time of maturity and minus after maturity. In general the frequency of male fishes as compared with female fishes in all group ages is approximately two times. The fecundity mean, and the diameter and the rate of eggs will substantially increase, as the Gonadosomatic index rises. The maturity age in the male fishes is 3 to 4 years and in female fishes is 4 to 5 years. The spawning of this species in rivers occurs repeatedly and in different time intervals, and do not take place once (Asyncronous). The Gastrosomatic index is directly related to index of fullness and will decrease, as the age increases. The index of fullness is relatively the months of April and May. The underlying reason is the need of the fishes to energy for reproduction. As the spawning time commences, the index of fullness moves down and the downward direction continues. After spa g mg and reduction of the volume of energy in the body, the index of fullness rises, and it will be substantially high until the beginning of fall. In fall and winter as it gets cold, the index of fullness moves downward and the body fat deposits are used. A correlation is shown between the changes in vacuity index and fullness indices. This means that as the fullness index rises, the vacuity index decreases, and vice versa. The Hepatosomatic index prior to the reproduction is at the highest amount and after spawning is at the lowest. No correlation is observed between the fullness and Hepatosomatic indices. In other words reproduction is an inherent and instinct originated matter; and its cycle goes on, alternately and in an orderly manner, upon completion of germinal cells, even when it coincides with reduction or stoppage of somatic cell growth. The rising trend of Hepatosomatic starts in August and will continue until the next July. The volume of fat around digestive tract is severely reduced in early spring and this trend will reach its apex in summer season. In the cold seasons, i.e. the fall and winter, the accumulation of fat around digestive tract increases. Consequently, a meaningful and inverse relation is observed between index of fullness, also the progress of sexual maturity stages and the volume of fat.

Marine Vertebrates and Low Frequency Sound: Technical Report for LFA EIS

Over the past 50 years, economic and technological developments have dramatically increased the human contribution to ambient noise in the ocean. The dominant frequencies of most human-made noise in the ocean is in the low-frequency range (defined as sound energy below 1000Hz), and low-frequency sound (LFS) may travel great distances in the ocean due to the unique propagation characteristics of the deep ocean (Munk et al. 1989). For example, in the Northern Hemisphere oceans low-frequency ambient noise levels have increased by as much as 10 dB during the period from 1950 to 1975 (Urick 1986; review by NRC 1994). Shipping is the overwhelmingly dominant source of low-frequency manmade noise in the ocean, but other sources of manmade LFS including sounds from oil and gas industrial development and production activities (seismic exploration, construction work, drilling, production platforms), and scientific research (e.g., acoustic tomography and thermography, underwater communication). The SURTASS LFA system is an additional source of human-produced LFS in the ocean, contributing sound energy in the 100-500 Hz band. When considering a document that addresses the potential effects of a low-frequency sound source on the marine environment, it is important to focus upon those species that are the most likely to be affected. Important criteria are: 1) the physics of sound as it relates to biological organisms; 2) the nature of the exposure (i.e. duration, frequency, and intensity); and 3) the geographic region in which the sound source will be operated (which, when considered with the distribution of the organisms will determine which species will be exposed). The goal in this section of the LFA/EIS is to examine the status, distribution, abundance, reproduction, foraging behavior, vocal behavior, and known impacts of human activity of those species may be impacted by LFA operations. To focus our efforts, we have examined species that may be physically affected and are found in the region where the LFA source will be operated. The large-scale geographic location of species in relation to the sound source can be determined from the distribution of each species. However, the physical ability for the organism to be impacted depends upon the nature of the sound source (i.e. explosive, impulsive, or non-impulsive); and the acoustic properties of the medium (i.e. seawater) and the organism. Non-impulsive sound is comprised of the movement of particles in a medium. Motion is imparted by a vibrating object (diaphragm of a speaker, vocal chords, etc.). Due to the proximity of the particles in the medium, this motion is transmitted from particle to particle in waves away from the sound source. Because the particle motion is along the same axis as the propagating wave, the waves are longitudinal. Particles move away from then back towards the vibrating source, creating areas of compression (high pressure) and areas of rarefaction (low pressure). As the motion is transferred from one particle to the next, the sound propagates away from the sound source. Wavelength is the distance from one pressure peak to the next. Frequency is the number of waves passing per unit time (Hz). Sound velocity (not to be confused with particle velocity) is the impedance is loosely equivalent to the resistance of a medium to the passage of sound waves (technically it is the ratio of acoustic pressure to particle velocity). A high impedance means that acoustic particle velocity is small for a given pressure (low impedance the opposite). When a sound strikes a boundary between media of different impedances, both reflection and refraction, and a transfer of energy can occur. The intensity of the reflection is a function of the intensity of the sound wave and the impedances of the two media. Two key factors in determining the potential for damage due to a sound source are the intensity of the sound wave and the impedance difference between the two media (impedance mis-match). The bodies of the vast majority of organisms in the ocean (particularly phytoplankton and zooplankton) have similar sound impedence values to that of seawater. As a result, the potential for sound damage is low; organisms are effectively transparent to the sound – it passes through them without transferring damage-causing energy. Due to the considerations above, we have undertaken a detailed analysis of species which met the following criteria: 1) Is the species capable of being physically affected by LFS? Are acoustic impedence mis-matches large enough to enable LFS to have a physical affect or allow the species to sense LFS? 2) Does the proposed SURTASS LFA geographical sphere of acoustic influence overlap the distribution of the species? Species that did not meet the above criteria were excluded from consideration. For example, phytoplankton and zooplankton species lack acoustic impedance mis-matches at low frequencies to expect them to be physically affected SURTASS LFA. Vertebrates are the organisms that fit these criteria and we have accordingly focused our analysis of the affected environment on these vertebrate groups in the world’s oceans: fishes, reptiles, seabirds, pinnipeds, cetaceans, pinnipeds, mustelids, sirenians (Table 1).

Relaxation and fracture characteristics in Co-based amorphous alloys

In this article a study of the fracture characteristics of Co66Fe4Mo2Si16B12 amorphous ribbon in the as-quenched state and after relaxation is presented. In the as-quenched state, the morphology of the crack surface shows a 'vein pattern' structure that corresponds to a large amount of plastic flow. After relaxation the surface morphology of the crack shows that when the temperature of the thermal annealing increases the plastic flow involved in the crack decreases. In the as-quenched state dynamic fracture characteristics (crack branching and stress wave induced crack) have been observed. These dynamic characteristics have not been observed in the relaxed samples but in the samples annealed at 250 °C for 20 min apart from the main crack, a crack along the width of the ribbon has been observed. © 2006 Elsevier B.V. All rights reserved.

Tsunami wave runup on the clustered islands using boussinesq-type model

This paper describes the implementation of the Boussinesq-type model and extends its application to the tsunami wave runup on the clustered islands (multiple adjacent conical islands), in turn, an extensively validated two-dimensional Boussinesq-type model is employed to examine the interaction between a propagating solitary wave and multiple idealised conical islands, with particular emphasis on a combination effect of two adjustable parameters for spacing interval/diameter ratio between the adjacent conical islands, S/D, and the rotating angle of the structural configuration,θ on maximum soliton runup heights. An extensive parameter study concerning the combination effect of alteringθ and S/D on the maximum soliton runup with the multi-conical islands is subsequently carried out and the distributions of the maximum runup heights on each conical island are obtained and compared for the twin-island cases. The worst case study is performed for each case in respect of the enhancement in the maximum wave runup heights by the multi-conical islands. It is found that the nonlinear wave diffraction, reflection and refraction play a significant role in varying the maximum soliton runup heights on multiconical islands. The comparatively large maximum soliton runups are generally predicted for the merged and bottom mounted clusteredislands. Furthermore, the joints of the clustered-merged islands are demonstrated to suffer the most of the tsunami wave attack. The conical islands that position in the shadow regions behind the surrounding islands are found to withstand relatively less extreme wave impact. Although, these numerical investigations are considerable simplifications of the multi conical islands, they give a critical insight into certain important hydrodynamic characteristics of the interaction between an extreme wave event and a group of clustered conical islands, and thus providing a useful engineering guidance for extreme wave mitigation and coastal development. Copyright © 2012 by the International Society of Offshore and Polar Engineers (ISOPE).

High-frequency programmable acoustic wave device realized through ferroelectric domain engineering

Surface acoustic wave devices are extensively used in contemporary wireless communication devices. We used atomic force microscopy to form periodic macroscopic ferroelectric domains in sol-gel deposited lead zirconate titanate, where each ferroelectric domain is composed of many crystallites, each of which contains many microscopic ferroelastic domains. We examined the electro-acoustic characteristics of the apparatus and found a resonator behavior similar to that of an equivalent surface or bulk acoustic wave device. We show that the operational frequency of the device can be tailored by altering the periodicity of the engineered domains and demonstrate high-frequency filter behavior (>8GHz), allowing low-cost programmable high-frequency resonators. © 2014 AIP Publishing LLC.

Daily production and photosynthetic characteristics of Nostoc flagelliforme grown under ambient and elevated CO2 conditions

Diurnal photosynthesis of Nostoc flagelliforme was investigated at varied levels of CO2 concentrations and desiccation in order to estimate the effects of enriched CO2 and watering on its daily production. Photosynthetic activity was closely correlated with the desiccated status of the algal mats, increased immediately after watering, reached a maximum at moderate water loss, and then declined with further desiccation. Increased CO2 concentration enhanced the diurnal photosynthesis and raised the daily production. Watering twice per day enhanced the daily production due to prolonged period of active photosynthesis. The values of daily net production were 1321280 mumol CO2 g (d. wt)(-1) d(-1), corresponding to about 0.6-6.1% daily increase in dry weight. High-CO2-grown mats required higher levels of photon flux density to saturate the alga's photosynthesis in air. Air-grown mats showed higher photosynthetic affinity for CO2 and higher levels of dark respiration compared with high-CO2-grown samples.

Life history characteristics of three types of females in Brachionus calyciflorus Pallas (Rotifera) fed different algae

This study describes the life history characteristics of amictic, unfertilized mictic and fertilized mictic females of the rotifer Brachionus calyciflorus cultured individually on two different algae at 0.1 mg ml(-1) food concentration and 27 degreesC. The duration of the juvenile period of amictic females was significantly shorter on Chlorella pyrenoidosa Chick than on Scenedesmus obliquus Kutz or both algae together. The duration of the juvenile period of unfertilized mictic females was significantly longer, and the number of eggs produced by amictic females was significantly larger on Chlorella pyrenoidosa than on S. obliquus. When fed the same type of alga, the duration of the juvenile period of the fertilized mictic females was the longest among the three types of females, and the durations of the reproductive period of the amictic females and the post-reproductive period of the fertilized mictic females were longer than, or equal to those of the other two types of females, respectively. The number of eggs produced by an unfertilized mictic female was the largest among the three types of females, and that of amictic females was larger than or equal to that of fertilized mictic females, depending on the type of diet.

Continuous-wave operation of GaN based multi-quantum-well laser diode at room temperature

Room-temperature operation of cw GaN based multi-quantum-well laser diodes (LDs) is demonstrated. The LD structure is grown on a sapphire (0001) substrate by metalorganic chemical vapour deposition. A 2.5 mu m x 800 mu m ridge waveguide structure is fabricated. The electrical and optical characteristics of the laser diode under direct current injection at room temperature are investigated. The threshold current and voltage of the LD under cw operation are 110mA and 10.5V, respectively. Thermal induced series resistance decrease and emission wavelength red-shift are observed as the injection current is increased. The full width at half maximum for the parallel and perpendicular far field pattern (FFP) are 12 degrees and 32 degrees, respectively.

Influence of fused interface on the optical and thermal characteristics of vertical cavity lasers

From the effective absorption coefficient of bonded interface and the relationship of interface to reflectivity at cavity mode for double bonded vertical cavity laser, it can be seen that bonded interfaces should be positioned at the null of standing wave distribution, and the thickness of interface should be less than 20 nm. Using the finite elements method, the temperature contour map of laser can be calculated. Results showed that the influence of thin interface to thermal characteristics of VCSELS is slight, while thick interface will lead to temperature increase of active region. SEM images demonstrate that hydrophobic bonding is suitable for the fabrication of the device, while hydrophilic bonding interface is unfavorable to optical and thermal properties of devices with interface thickness larger than 40 nm.

High-Temperature Continuous-Wave Single-Mode Operation of 1.3 mu m p-Doped InAs-GaAs Quantum-Dot VCSELs

In this letter, we have demonstrated continuous-wave single-mode operation of 1.3-mu m InAs-GaAs quantum-dot (QD) vertical-cavity surface-emitting lasers (VCSELs) with p-type modulation-doped QD active region from 20 degrees C to 60 degrees C. The highest output power of 0.435mW and lowest threshold current of 1.2 mA under single-mode operation are achieved. The temperature-dependent output characteristics of QD-VCSELs are investigated. Single-mode operation with a sidemode suppression ratio of 34 dB is observed at room temperature. The critical size of oxide aperture for single-mode operation is discussed.

Surface characteristics of SiO2-TiO2 strip fabricated by laser direct writing

SiO2-TiO2 sol-gel films are deposited on SiO2/Si by dip-coating technique. The SiO2-TiO2 strips are fabricated by laser direct writing using all ytterbium fiber laser and followed by chemical etching. Surface structures, morphologies and roughness of the films and strips are characterized. The experimental results demonstrate that the SiO2-TiO2 sol-gel film is loose in Structure and a shrinkage concave groove forms if the film is irradiated by laser beam. The surface roughness of both non-irradiated and laser irradiated areas increases with the chemical etching time. But the roughness of laser irradiated area increases more than that of non-irradiated area under the same etching time. After being etched for 28 s, the surface roughness value of the laser irradiated area increases from 0.3 nm to 3.1 nm.

Fabrication and modulation characteristics of 1.3 mu m p-doped InAs quantum dot vertical cavity surface emitting lasers

We present the fabrication of 1.3 mu m waveband p-doped InAs quantum dot (QD) vertical cavity surface emitting lasers (VCSELs) with an extremely simple process. The continuous-wave saturated output power of 1.1 mW with a lasing wavelength of 1280 nm is obtained at room temperature. The high-speed modulation characteristics of p-doped QD VCSELs of two different oxide aperture sizes are investigated and compared. The maximum 3 dB modulation bandwidth of 2.5 GHz can be achieved at a bias current of 7 mA for a p-doped QD VCSEL with an oxide aperture size of 10 mu m in the small signal frequency response measurements. The crucial factors for the 3 dB bandwidth limitation are discussed according to the parameters' extraction from frequency response.

Symmetry analysis and numerical simulation of mode characteristics for equilateral-polygonal optical microresonators

Mode characteristics for two-dimensional equilateral-polygonal microresonators are investigated based on symmetry analysis and finite-difference time-domain numerical simulation. The symmetries of the resonators can be described by the point group C-Nv, accordingly, the confined modes in these resonators can be classified into irreducible representations of the point group C-Nv. Compared with circular resonators, the modes in equilateral-polygonal resonators have different characteristics due to the break of symmetries, such as the split of double-degenerate modes, high field intensity in the center region, and anomalous traveling-wave modes, which should be considered in the designs of the polygonal resonator microlasers or optical add-drop filters.