Reuse of information for selection of methods and operating conditions for drying of pharmaceutical materials

Drying is a major step in the manufacturing process in pharmaceutical industries, and the selection of dryer and operating conditions are sometimes a bottleneck. In spite of difficulties, the bottlenecks are taken care of with utmost care due to good manufacturing practices (GMP) and industries' image in the global market. The purpose of this work is to research the use of existing knowledge for the selection of dryer and its operating conditions for drying of pharmaceutical materials with the help of methods like case-based reasoning and decision trees to reduce time and expenditure for research. The work consisted of two major parts as follows: Literature survey on the theories of spray dying, case-based reasoning and decision trees; working part includes data acquisition and testing of the models based on existing and upgraded data. Testing resulted in a combination of two models, case-based reasoning and decision trees, leading to more specific results when compared to conventional methods.

Image quality in CT: From physical measurements to model observers.

Evaluation of image quality (IQ) in Computed Tomography (CT) is important to ensure that diagnostic questions are correctly answered, whilst keeping radiation dose to the patient as low as is reasonably possible. The assessment of individual aspects of IQ is already a key component of routine quality control of medical x-ray devices. These values together with standard dose indicators can be used to give rise to 'figures of merit' (FOM) to characterise the dose efficiency of the CT scanners operating in certain modes. The demand for clinically relevant IQ characterisation has naturally increased with the development of CT technology (detectors efficiency, image reconstruction and processing), resulting in the adaptation and evolution of assessment methods. The purpose of this review is to present the spectrum of various methods that have been used to characterise image quality in CT: from objective measurements of physical parameters to clinically task-based approaches (i.e. model observer (MO) approach) including pure human observer approach. When combined together with a dose indicator, a generalised dose efficiency index can be explored in a framework of system and patient dose optimisation. We will focus on the IQ methodologies that are required for dealing with standard reconstruction, but also for iterative reconstruction algorithms. With this concept the previously used FOM will be presented with a proposal to update them in order to make them relevant and up to date with technological progress. The MO that objectively assesses IQ for clinically relevant tasks represents the most promising method in terms of radiologist sensitivity performance and therefore of most relevance in the clinical environment.

Les déterminants de la prolongation des séjours en SSRG et les indicateurs du devenir des patients après leur sortie : Étude rétrospective au CHRU de Strasbourg [Determinants of prolonged stays in geriatric rehabilitation department and indicators of patient outcome after discharge: A retrospective study in Strasbourg university hospital]

Objectif. Analyser les déterminants de la prolongation des séjours hospitaliers en service de soins de suite et réadaptation gériatrique (SSRG) et identifier les indicateurs du devenir des patients après leur sortie. Méthode. Étude rétrospective au CHRU de Strasbourg de l'ensemble des séjours de durée supérieure à 90 jours entre le 1 janvier 2012 et le 30 septembre 2013. L'ensemble des données sociodémographiques, descriptives des séjours et de l'état de santé des patients ont été analysées. Les patients ont été suivis 9 mois après leur sortie. Les réhospitalisations, l'admission en institution et le décès ont été informés par un contact téléphonique auprès du médecin traitant ou de la famille. Résultats. Quarante-six séjours ont été analysés. Les patients étaient à 68,0 % des femmes. La moyenne d'âge était de 82,9 ± 5,8 ans. Quatre-vingt-dix-huit pour cent d'entre eux vivaient à domicile avant l'admission en milieu hospitalier. Les raisons justifiant la prolongation étaient d'ordre médical (60,8 %), psychique (45,6 %), social (65,2 %) et liées à la difficulté de trouver une solution d'aval (58,7 %). À la fin de leur séjour, 9 patients ont pu regagner leur domicile et 37 ont été admis directement en institution. Durant la période de suivi, 17 patients ont été réhospitalisés au moins une fois et 3 jusqu'à trois fois. Au 9e mois, 9 patients étaient décédés dans un délai moyen de 75 jours après la sortie du SSRG. Les résultats des analyses unifactorielles et multivariées ont permis d'identifier des indicateurs d'évolution défavorable (décès et/ou réhospitalisation). Aucune des variables sociodémographiques ou de syndrome gériatrique n'a été identifiée. Par contre un « motif d'hospitalisation pour une maladie infectieuse », ou pour « un trouble de la marche ou une chute », une « prolongation du séjour en SSRG pour raison médicale » et un « séjour prolongé en court séjour » étaient les facteurs identifiés. Conclusion. Dans la tendance actuelle à améliorer la rentabilité de l'utilisation des ressources de santé, ces résultats rappellent qu'il est important de maintenir un juste équilibre entre utilisation raisonnée des ressources et les besoins spécifiques des patients âgés.

Towards actionable international comparisons of health system performance: expert revision of the OECD framework and quality indicators.

OBJECTIVE: To review and update the conceptual framework, indicator content and research priorities of the Organisation for Economic Cooperation and Development's (OECD) Health Care Quality Indicators (HCQI) project, after a decade of collaborative work. DESIGN: A structured assessment was carried out using a modified Delphi approach, followed by a consensus meeting, to assess the suite of HCQI for international comparisons, agree on revisions to the original framework and set priorities for research and development. SETTING: International group of countries participating to OECD projects. PARTICIPANTS: Members of the OECD HCQI expert group. RESULTS: A reference matrix, based on a revised performance framework, was used to map and assess all seventy HCQI routinely calculated by the OECD expert group. A total of 21 indicators were agreed to be excluded, due to the following concerns: (i) relevance, (ii) international comparability, particularly where heterogeneous coding practices might induce bias, (iii) feasibility, when the number of countries able to report was limited and the added value did not justify sustained effort and (iv) actionability, for indicators that were unlikely to improve on the basis of targeted policy interventions. CONCLUSIONS: The revised OECD framework for HCQI represents a new milestone of a long-standing international collaboration among a group of countries committed to building common ground for performance measurement. The expert group believes that the continuation of this work is paramount to provide decision makers with a validated toolbox to directly act on quality improvement strategies.

Adapting established instruments to build useful food sovereignty indicators

The recent context of global food emergency and ecological crisis has increased the relevance of people’s struggle for food sovereignty (FSv), which promotes the transformation of the dominant food system and claims ‘the right of peoples to healthy and culturally appropriate food produced through ecologically sound and sustainable methods, and their right to define their own food and agriculture systems’. Revisiting two Spanish and Catalan articles developing FSv indicators, this article aims at discussing the need and utility of developing FSv indicators at different territorial levels. Confronting these two territorial scales, the paper also identifies common steps that can facilitate other future processes of building FSv indicators. As a conclusion, the paper suggests that these processes of building indicators can contribute to providing political direction at different geographical scales for the implementation of the FSv proposal. At the same time, they favor the movement’s self-reflexivity in its practices while supporting the collective shaping of future actions

Receiver operating characteristic (ROC) curve for classification of18F-NaF uptake on PET/CT

Abstract Objective: To assess the cutoff values established by ROC curves to classify18F-NaF uptake as normal or malignant. Materials and Methods: PET/CT images were acquired 1 hour after administration of 185 MBq of18F-NaF. Volumes of interest (VOIs) were drawn on three regions of the skeleton as follows: proximal right humerus diaphysis (HD), proximal right femoral diaphysis (FD) and first vertebral body (VB1), in a total of 254 patients, totalling 762 VOIs. The uptake in the VOIs was classified as normal or malignant on the basis of the radiopharmaceutical distribution pattern and of the CT images. A total of 675 volumes were classified as normal and 52 were classified as malignant. Thirty-five VOIs classified as indeterminate or nonmalignant lesions were excluded from analysis. The standardized uptake value (SUV) measured on the VOIs were plotted on an ROC curve for each one of the three regions. The area under the ROC (AUC) as well as the best cutoff SUVs to classify the VOIs were calculated. The best cutoff values were established as the ones with higher result of the sum of sensitivity and specificity. Results: The AUCs were 0.933, 0.889 and 0.975 for UD, FD and VB1, respectively. The best SUV cutoffs were 9.0 (sensitivity: 73%; specificity: 99%), 8.4 (sensitivity: 79%; specificity: 94%) and 21.0 (sensitivity: 93%; specificity: 95%) for UD, FD and VB1, respectively. Conclusion: The best cutoff value varies according to bone region of analysis and it is not possible to establish one value for the whole body.

Russian Enterprise Restructuring - the Effect of Privatisation and Market Liberalisation on the Performance of Large Enterprises

The fundamental question in the transitional economies of the former Eastern Europe and Soviet Union has been whether privatisation and market liberalisation have had an effect on the performance of former state-owned enterprises. This study examines the effect of privatisation, capital market discipline, price liberalisation and international price exposure on the restructuring of large Russian enterprises. The performance indicators are sales, profitability, labour productivity and stock market valuations. The results do not show performance differences between state-owned and privatised enterprises. On the other hand, the expansion of the de novo private sector has been strong. New enterprises have significantly higher sales growth, profitability and labour productivity. However, the results indicate a diminishing effect of ownership. The international stock market listing has a significant positive effect on profitability, while the effect of domestic stock market listing is insignificant. The international price exposure has a significant positive increasing effect on profitability and labour productivity. International enterprises have higher profitability only when operating on price liberalised markets, however. The main results of the study are strong evidence on the positive effects of international linkages on the enterprise restructuring and the higher than expected role of new enterprises in the Russian economy.

Monitoimityöstökeskuksen kokonaistehokkuuden parantaminen kokonaisvaltaisella tuottavalla kunnossapidolla

Tämän diplomityön tavoitteena oli tutustua kokonaisvaltaisen tuottavan kunnossapidon teoriaan ja soveltaa sitä Abloy Oy Joensuun tehtaalla pilottikohteeksi valittuun koneeseen. Pilottikohteeksi oli valittu uusi Sveitsiläinen Hydromat-monitoimityöstökeskus, jonka kokonaistehokkuutta (OEE) pyrittiin parantamaan kokonaisvaltaisella tuottavalla kunnossapidolla (TPM). Työn kirjallisuusosuudessa tarkastellaan teoriatietoja, jotka liittyvät yleisesti kunnossapitoon ja tarkemmin TPM-toimintaan. Lisäksi käsitellään kunnossapidon mittareita ja tietojärjestelmiä. Työn empiirisessä osassa selvitetään, kuinka TPM-toiminta otettiin käyttöön Hydromat-monitoimityöstökeskuksen osalta. Eniten resursseja käytettiin koneen asetusaikojen lyhentämiseen. Lisäksi koneen käyttäjien itsenäiseen kunnossapitoon siirtyminen kuului työn sisältöön. Työssä on selvitetty myös uuden tuotannon seurantataulun käyttöönotto. Seurantataulusta nähdään useita tuotantotietoja kuten kokonaistehokkuus. Työn merkittävimmät tulokset osoittavat, että asetusajat ovat tällä hekellä hyvin pitkiä tavoitteisiin nähden. Asetusaikojen lyhentyminen halutulle tasolle vaatii koneen käyttäjien pitkän oppimisprosessin sekä optimaaliset toimintaolosuhteet. Lisäksi havaittiin, että uuden toimintamallin esitteleminen ja sen käyttöönotto valmistavassa teollisuudessa on vaativa prosessi.

Teknologiainvestointien vaikutus huonekaluja valmistavien yritysten kannattavuuteen

Tutkimuksen tavoitteena oli selvittää Etelä-Pohjanmaalla huonekaluja valmistavien yritysten kone- ja laiteinvestointien vaikutusta yritysten kannattavuuteen. Toisena tavoitteena oli selvittää, millaisia investointiprosessia tukevia asiantuntijapalveluja yritykset ovat käyttäneet teknologiainvestointien yhteydessä sekä millaisille palveluille yrityksillä on tarvetta. Kannattavuuden tarkastelu kohdistui viiden huonekalutehtaan tilinpäätöstietoihin. Tarkasteltavaan yritysryhmään valittiin yritykset, jotka ovat investoineet selkeästi EU:n keskimääräistä investointitasoa enemmän. Kannattavuusvertailun mittareiksi valittiin liikevaihdon määrä henkilöä kohden, käyttökate, liikevoitto ja sijoitetun pääoman tuotto. Palvelutarvekysely kohdistui myös viiteen yritykseen, jotka olivat osin samoja yrityksiä kuin kannattavuustarkastelussa. Haastattelun avulla kartoitettiin yritysten kone- ja laiteinvestointien suunnittelu- ja käyttöönottovaiheen asiantuntijapalveluiden käyttöä ja niistä saatuja kokemuksia sekä kysyttiin yritysten tarpeet uusille asiantuntijapalveluille. Kannattavuustutkimuksen tuloksena voidaan havaita, että keskimääräistä enemmän koneisiin ja laitteisiin investoineet huonekaluyritykset toimivat kannattavammin kuin ne yritykset, jotka eivät tee merkittäviä investointeja. Haastattelututkimuksen tuloksena voidaan todeta, että yritykset ovat käyttäneet pääasiassa oman tilitoimiston palveluja investointien kannattavuutta ja tuotantokapasiteettia arvioidessaan. Koneiden käyttöönotossa yritykset ovat käyttäneet lähinnä koneiden maahantuojien koulutus- ja asennuspalveluja. Uusina palvelutarpeina esiin nousi koneiden tekninen vertailu ja investointiavustusten ja -lainojen hakuprosessia tukevat palvelut.

Performance Indicators in Sourcing : Case: Mainospyörä Ltd

The business environment has rapidly become more global and more competitive. It sets new requirements for the company management. It is not enough to look at the financial information of the company, but one need to analyse also the internal processes as well. Sourcing exists in every company. It is no longer just a supporting function in a company chain of operations. By sourcing company can affect the profitability of the company in both direct and indirect ways The thesis overviewed the role of strategic accounting, sourcing and performance measurements in particularly, in company strategic steering. The study is qualitative, where the meaning was to describe true life. In the same time it is an explanatory case study. The aim of the study was to build up a set of sourcing performance indicators for the case company.

Treatment of oily wastewater by ultrafiltration: The effect of different operating and solution conditions

In many industries, such as petroleum production, and the petrochemical, metal, food and cosmetics industries, wastewaters containing an emulsion of oil in water are often produced. The emulsions consist of water (up to 90%), oils (mineral, animal, vegetable and synthetic), surfactants and other contaminates. In view of its toxic nature and its deleterious effects on the surrounding environment (soil, water) such wastewater needs to be treated before release into natural water ways. Membrane-based processes have successfully been applied in industrial applications and are considered as possible candidates for the treatment of oily wastewaters. Easy operation, lower cost, and in some cases, the ability to reduce contaminants below existing pollution limits are the main advantages of these systems. The main drawback of membranes is flux decline due tofouling and concentration polarisation. The complexity of oil-containing systems demands complementary studies on issues related to the mitigation of fouling and concentration polarisation in membranebased ultrafiltration. In this thesis the effect of different operating conditions (factors) on ultrafiltration of oily water is studied. Important factors are normally correlated and, therefore, their effect should be studied simultaneously. This work uses a novel approach to study different operating conditions, like pressure, flow velocity, and temperature, and solution properties, like oil concentration (cutting oil, diesel, kerosene), pH, and salt concentration (CaCl2 and NaCl)) in the ultrafiltration of oily water, simultaneously and in a systematic way using an experimental design approach. A hypothesis is developed to describe the interaction between the oil drops, salt and the membrane surface. The optimum conditions for ultrafiltration and the contribution of each factor in the ultrafiltration of oily water are evaluated. It is found that the effect on permeate flux of the various factors studied strongly depended on the type of oil, the type of membrane and the amount of salts. The thesis demonstrates that a system containing oil is very complex, and that fouling and flux decline can be observed even at very low pressures. This means that only the weak form of the critical flux exists for such systems. The cleaning of the fouled membranes and the influence of different parameters (flow velocity, temperature, time, pressure, and chemical concentration (SDS, NaOH)) were evaluated in this study. It was observed that fouling, and consequently cleaning, behaved differently for the studied membranes. Of the membranes studied, the membrane with the lowest propensity for fouling and the most easily cleaned was the regenerated cellulose membrane (C100H). In order to get more information about the interaction between the membrane and the components of the emulsion, a streaming potential study was performed on the membrane. The experiments were carried out at different pH and oil concentration. It was seen that oily water changed the surface charge of the membrane significantly. The surface charge and the streaming potential during different stages of filtration were measured and analysed being a new method for fouling of oil in this thesis. The surface charge varied in different stages of filtration. It was found that the surface charge of a cleaned membrane was not the same as initially; however, the permeability was equal to that of a virgin membrane. The effect of filtration mode was studied by performing the filtration in both cross-flow and deadend mode. The effect of salt on performance was considered in both studies. It was found that salt decreased the permeate flux even at low concentration. To test the effect of hydrophilicity change, the commercial membranes used in this thesis were modified by grafting (PNIPAAm) on their surfaces. A new technique (corona treatment) was used for this modification. The effect of modification on permeate flux and retention was evaluated. The modified membranes changed their pore size around 33oC resulting in different retention and permeability. The obtained results in this thesis can be applied to optimise the operation of a membrane plant under normal or shock conditions or to modify the process such that it becomes more efficient or effective.

Indicadores sociales y psicosociales de calidad de vida de las personas mayores en un municipio = Social and psychosocial quality of life indicators of older persons in a municipality

A research about the quality of life of the older persons of a municipality starting from the analysis of the perceptions, evaluations and expectations related to concrete spheres of their lives (familiar characteristics, housing, health, nearby environment, activities, needs and dependencies and persons helping them to satisfy needs) is presented. Answers to 1988 questionnaires obtained from two representative samples of older per - sons living in private homes in the city have been analysed: persons over 65 years old and a specific one composed by a sub-sample of the general one, with persons over 75 years living alone. Data shaping contextual indicators related to housing have been analysed. The auto - nomy to drive and the evaluation of on’s health seem to be positive indicators to take in account while sutying quality of life at these ages. Sentinel indicators of the physical and relational conditions in the family and indicators of dependency are analysed as well. The evaluations of the older persons about their own life conditions are also analysed through psychosocial indicators connected to housing, nearby environmenent, their activities andincomes. The results obtained are applicable in order to improve the decision making process in social intervention programmes developed in the field of ageing aiming to take into account their perspectives

Parallel-Operating Three-Phase Voltage Source Inverters – Circulating CurrentModeling, Analysis and Mitigation

The maximum realizable power throughput of power electronic converters may be limited or constrained by technical or economical considerations. One solution to this problemis to connect several power converter units in parallel. The parallel connection can be used to increase the current carrying capacity of the overall system beyond the ratings of individual power converter units. Thus, it is possible to use several lower-power converter units, produced in large quantities, as building blocks to construct high-power converters in a modular manner. High-power converters realized by using parallel connection are needed for example in multimegawatt wind power generation systems. Parallel connection of power converter units is also required in emerging applications such as photovoltaic and fuel cell power conversion. The parallel operation of power converter units is not, however, problem free. This is because parallel-operating units are subject to overcurrent stresses, which are caused by unequal load current sharing or currents that flow between the units. Commonly, the term ’circulatingcurrent’ is used to describe both the unequal load current sharing and the currents flowing between the units. Circulating currents, again, are caused by component tolerances and asynchronous operation of the parallel units. Parallel-operating units are also subject to stresses caused by unequal thermal stress distribution. Both of these problemscan, nevertheless, be handled with a proper circulating current control. To design an effective circulating current control system, we need information about circulating current dynamics. The dynamics of the circulating currents can be investigated by developing appropriate mathematical models. In this dissertation, circulating current models aredeveloped for two different types of parallel two-level three-phase inverter configurations. Themodels, which are developed for an arbitrary number of parallel units, provide a framework for analyzing circulating current generation mechanisms and developing circulating current control systems. In addition to developing circulating current models, modulation of parallel inverters is considered. It is illustrated that depending on the parallel inverter configuration and the modulation method applied, common-mode circulating currents may be excited as a consequence of the differential-mode circulating current control. To prevent the common-mode circulating currents that are caused by the modulation, a dual modulator method is introduced. The dual modulator basically consists of two independently operating modulators, the outputs of which eventually constitute the switching commands of the inverter. The two independently operating modulators are referred to as primary and secondary modulators. In its intended usage, the same voltage vector is fed to the primary modulators of each parallel unit, and the inputs of the secondary modulators are obtained from the circulating current controllers. To ensure that voltage commands obtained from the circulating current controllers are realizable, it must be guaranteed that the inverter is not driven into saturation by the primary modulator. The inverter saturation can be prevented by limiting the inputs of the primary and secondary modulators. Because of this, also a limitation algorithm is proposed. The operation of both the proposed dual modulator and the limitation algorithm is verified experimentally.