Modellazione numerica del comportamento di una struttura in muratura

In questi ultimi anni il tema della sicurezza sismica degli edifici storici in muratura ha assunto particolare rilievo in quanto a partire soprattutto dall’ordinanza 3274 del 2003, emanata in seguito al sisma che colpì il Molise nel 2002, la normativa ha imposto un monitoraggio ed una classificazione degli edifici storici sotto tutela per quanto riguarda la vulnerabilità sismica (nel 2008, quest’anno, scade il termine per attuare quest’opera di classificazione). Si è posto per questo in modo più urgente il problema dello studio del comportamento degli edifici storici (non solo quelli che costituiscono monumento, ma anche e soprattutto quelli minori) e della loro sicurezza. Le Linee Guida di applicazione dell’Ordinanza 3274 nascono con l’intento di fornire strumenti e metodologie semplici ed efficaci per affrontare questo studio nei tempi previsti. Il problema si pone in modo particolare per le chiese, presenti in grande quantità sul territorio italiano e di cui costituiscono gran parte del patrimonio culturale; questi edifici, composti di solito da grandi elementi murari, non presentano comportamento scatolare, mancando orizzontamenti, elementi di collegamento efficace e muri di spina interni e sono particolarmente vulnerabili ad azioni sismiche; presentano inoltre un comportamento strutturale a sollecitazioni orizzontali che non può essere colto con un approccio globale basato, ad esempio, su un’analisi modale lineare: non ci sono modi di vibrare che coinvolgano una sufficiente parte di massa della struttura; si hanno valori dei coefficienti di partecipazione dei varii modi di vibrare minori del 10% (in generale molto più bassi). Per questo motivo l’esperienza e l’osservazione di casi reali suggeriscono un approccio di studio degli edifici storici sacri in muratura attraverso l’analisi della sicurezza sismica dei cosiddetti “macroelementi” in cui si può suddividere un edificio murario, i quali sono elementi che presentano un comportamento strutturale autonomo. Questo lavoro si inserisce in uno studio più ampio iniziato con una tesi di laurea dal titolo “Analisi Limite di Strutture in Muratura. Teoria e Applicazione all'Arco Trionfale” (M. Temprati), che ha studiato il comportamento dell’arco trionfale della chiesa collegiata di Santa Maria del Borgo a San Nicandro Garganico (FG). Suddividere un edificio in muratura in più elementi è il metodo proposto nelle Linee Guida, di cui si parla nel primo capitolo del presente lavoro: la vulnerabilità delle strutture può essere studiata tramite il moltiplicatore di collasso quale parametro in grado di esprimere il livello di sicurezza sismica. Nel secondo capitolo si illustra il calcolo degli indici di vulnerabilità e delle accelerazioni di danno per la chiesa di Santa Maria del Borgo, attraverso la compilazione delle schede dette “di II livello”, secondo quanto indicato nelle Linee Guida. Nel terzo capitolo viene riportato il calcolo del moltiplicatore di collasso a ribaltamento della facciata della chiesa. Su questo elemento si è incentrata l’attenzione nel presente lavoro. A causa della complessità dello schema strutturale della facciata connessa ad altri elementi dell’edificio, si è fatto uso del codice di calcolo agli elementi finiti ABAQUS. Della modellazione del materiale e del settaggio dei parametri del software si è discusso nel quarto capitolo. Nel quinto capitolo si illustra l’analisi condotta tramite ABAQUS sullo stesso schema della facciata utilizzato per il calcolo manuale nel capitolo tre: l’utilizzo combinato dell’analisi cinematica e del metodo agli elementi finiti permette per esempi semplici di convalidare i risultati ottenibili con un’analisi non-lineare agli elementi finiti e di estenderne la validità a schemi più completi e più complessi. Nel sesto capitolo infatti si riportano i risultati delle analisi condotte con ABAQUS su schemi strutturali in cui si considerano anche gli elementi connessi alla facciata. Si riesce in questo modo ad individuare con chiarezza il meccanismo di collasso di più facile attivazione per la facciata e a trarre importanti informazioni sul comportamento strutturale delle varie parti, anche in vista di un intervento di ristrutturazione e miglioramento sismico.

La comunicazione chimica in Blattaria: contributo al miglioramento della lotta

CHEMICAL COMMUNICATION IN BLATTARIA: CONTRIBUTION TO THE IMPROVEMENT OF THE CONTROL TECNIQUES The management of cockroach infestations in urban environment has undergone some changes in recent years by moving to the predominant use of baits, thanks to the awareness of the risks connected with the use of spray insecticides. The effectiveness of a bait is determined by the collective performance of its components, including active and inert ingredients, the food attractant and any other attractive odour. This research has focused on the behavioral responses of Italian sinanthropic cockroaches to semiochemicals and food attractants, for the purpose of evaluating a possible practical application and of contributing to the improvement of control techniques. Behavioral and morphological studies have been carried out on Supella longipalpa (F.), a small cockroach that is spreading in Italy. Behavioral assays showed that the fourth and fifth tergites of females are significantly more attractive than other region of the body. Cuticular pores and ducts ending in glandular structures (observed with a S.E.M. = Scanning Electron Microscope) are present in large number on these tergites, suggesting that they could be involved in the production and the release of sexual pheromone. Cockroaches produce an aggregation pheromone that is excreted along with their frass and that consists of volatile and non-volatile compounds, mainly amines and steroidal glycosides. The effectiveness of faecal extracts obtained from excrements of Blattella germanica (L.), Blatta orientalis L., Periplaneta americana (L.) and S. longipalpa was evaluated, both at intraspecific and interspecific level, using a "Y" tube olfactometer. Bioassays showed that faecal extracts obtained with methanol have a good intraspecific attractiveness and, in some cases, they showed also interspecific behavioral responses. A gel was prepared, having physical characteristics that could give a good resistance to dehydration, as a potential basis for a new bait; the gel was then added faecal extracts, obtained with methanol from B. germanica and S. longipalpa frass. Arena-tests showed that the new gel containing faecal extracts is more attractive than some commercial gel formulations used as comparison: it was the only product that could attract 100% of insects placed in the arenas in 4-5 days. In conclusion, the substances involved in chemical communication of Blattaria may be able to effectively increase the attractiveness of products for monitoring and controlling cockroaches.

The changing politics of preference formation in international trade negotiations: the European Union in the Doha Round

This research seeks to provide an explanation for variations of “politics” of preference formation in international trade negotiations. Building on the ‘policy determines politics’ argument, I hypothesize the existence of a causal relationship between issue-characteristics and their variations with politics dynamics and their variations. More specifically, this study seeks to integrate into a single analytical framework two dimensions along which variations in the “politics of preference formation” can be organized: configurations of power relationships among the relevant actors in the structures within which they interact as well as the logic and the motivations of the actors involved in the policy making process. To do so, I first construct a four-cell typology of ‘politics of preference formation’ and, then, I proceed by specifying that the type of state-society configurations as well as the type of actors’ motivations in the “politics of preference formation” depend, respectively, on the degree to which a policy issue is perceived as politically salient and on the extent to which the distributional implications of such an issue can be calculated by the relevant stakeholders in the policy making process. The empirical yardstick against which the validity of the theoretical argument proposed is tested is drawn from evidence concerning the European Union’s negotiating strategy in four negotiating areas in the context of the so-called WTO’s Doha Development Round of multilateral trade negotiations: agriculture, competition, environment and technical assistance and capacity building.

Point defects in carbon nanostructures studied by in-situ electron microscopy

In the present work, the formation and migration of point defects induced by electron irradiation in carbon nanostructures, including carbon onions, nanotubes and graphene layers, were investigated by in-situ TEM. The mobility of carbon atoms normal to the layers in graphitic nanoparticles, the mobility of carbon interstitials inside SWCNTs, and the migration of foreign atoms in graphene layers or in layers of carbon nanotubes were studied. The diffusion of carbon atoms in carbon onions was investigated by annealing carbon onions and observing the relaxation of the compressed clusters in the temperature range of 1200 – 2000oC. An activation energy of 5.0±0.3 eV was obtained. This rather high activation energy for atom exchange between the layers not only prevents the exchange of carbon atoms between the layers at lower temperature but also explains the high morphological and mechanical stability of graphite nanostructures. The migration of carbon atoms in SWCNTs was investigated quantitatively by cutting SWCNT bundles repeatedly with a focused electron beam at different temperatures. A migration barrier of about 0.25 eV was obtained for the diffusion of carbon atoms inside SWCNTs. This is an experimental confirmation of the high mobility of interstitial atoms inside carbon nanotubes, which corroborates previously developed theoretical models of interstitial diffusivity. Individual Au and Pt atoms in one- or two-layered graphene planes and MWCNTs were monitored in real time at high temperatures by high-resolution TEM. The direct observation of the behavior of Au and Pt atoms in graphenic structures in a temperature range of 600 – 700°C allows us to determine the sites occupied by the metal atoms in the graphene layer and the diffusivities of the metal atoms. It was found that metal atoms were located in single or multiple carbon vacancies, not in off-plane positions, and diffused by site exchange with carbon atoms. Metal atoms showed a tendency to form clusters those were stable for a few seconds. An activation energy of around 2.5 eV was obtained for the in-plane migration of both Au and Pt atoms in graphene (two-dimensional diffusion). The rather high activation energy indicates covalent bonding between metal and carbon atoms. Metal atoms were also observed to diffuse along the open edge of graphene layers (one-dimensional diffusion) with a slightly lower activation energy of about 2.3 eV. It is also found that the diffusion of metal atoms in curved graphenic layers of MWCNTs is slightly faster than in planar graphene.

Water-soluble organic compounds in air particulate matter analyzed by HPLC-DAD-MS and HPLC-MS/MS: abundance, sources and transformation of carboxylic acids, nitrophenols and nitrated proteins

Wasserlösliche organische Verbindungen (WSOCs) sind Hauptbestandteile atmosphärischer Aerosole, die bis zu ~ 50% und mehr der organischen Aerosolfraktion ausmachen. Sie können die optischen Eigenschaften sowie die Hygroskopizität von Aerosolpartikeln und damit deren Auswirkungen auf das Klima beeinflussen. Darüber hinaus können sie zur Toxizität und Allergenität atmosphärischer Aerosole beitragen.In dieser Studie wurde Hochleistungsflüssigchromatographie gekoppelt mit optischen Diodenarraydetektion und Massenspektrometrie (HPLC-DAD-MS und HPLC-MS/MS) angewandt, um WSOCs zu analysieren, die für verschiedene Aerosolquellen und -prozesse charakteristisch sind. Niedermolekulare Carbonsäuren und Nitrophenole wurden als Indikatoren für die Verbrennung fossiler Brennstoffe und die Entstehung sowie Alterung sekundärer organischer Aerosole (SOA) aus biogenen Vorläufern untersucht. Protein-Makromoleküle wurden mit Blick auf den Einfluss von Luftverschmutzung und Nitrierungsreaktionen auf die Allergenität primärer biologischer Aerosolpartikel – wie Pollen und Pilzsporen – untersucht.rnFilterproben von Grob- und Feinstaubwurden über ein Jahr hinweg gesammelt und auf folgende WSOCs untersucht: die Pinen-Oxidationsprodukte Pinsäure, Pinonsäure und 3-Methyl-1,2,3-Butantricarbonsäure (3-MBTCA) sowie eine Vielzahl anderer Dicarbonsäuren und Nitrophenole. Saisonale Schwankungen und andere charakteristische Merkmale werden mit Blick auf Aerosolquellen und -senken im Vergleich zu Daten anderen Studien und Regionen diskutiert. Die Verhätlnisse von Adipinsäure und Phthalsäure zu Azelainsäure deuten darauf hin, dass die untersuchten Aerosolproben hauptsächlich durch biogene Quellen beeinflusst werden. Eine ausgeprägte Arrhenius-artige Korrelation wurde zwischen der 3-MBTCA-¬Konzentration und der inversen Temperatur beobachtet (R2 = 0.79, Ea = 126±10 kJ mol-1, Temperaturbereich 275–300 K). Modellrechnungen zeigen, dass die Temperaturabhängigkeit auf eine Steigerung der photochemischen Produktionsraten von 3-MBTCA durch erhöhte OH-Radikal-Konzentrationen bei erhöhten Temperaturen zurückgeführt werden kann. Im Vergleich zur chemischen Reaktionskinetik scheint der Einfluss von Gas-Partikel-Partitionierungseffekten nur eine untergeordnete Rolle zu spielen. Die Ergebnisse zeigen, dass die OH-initiierte Oxidation von Pinosäure der geschwindigkeitsbestimmende Schritt der Bildung von 3-MBTCA ist. 3-MBTCA erscheint somit als Indikator für die chemische Alterung von biogener sekundärer organischer Aerosole (SOA) durch OH-Radikale geeignet. Eine Arrhenius-artige Temperaturabhängigkeit wurde auch für Pinäure beobachtet und kann durch die Temperaturabhängigkeit der biogenen Pinen-Emissionen als geschwindigkeitsbestimmender Schritt der Pinsäure-Bildung erklärt werden (R2 = 0.60, Ea = 84±9 kJ mol-1).rn rnFür die Untersuchung von Proteinnitrierungreaktionen wurde nitrierte Protein¬standards durch Flüssigphasenreaktion von Rinderserumalbumin (BSA) und Ovalbumin (OVA) mit Tetranitromethan (TNM) synthetisiert.Proteinnitrierung erfolgt vorrangig an den Resten der aromatischen Aminosäure Tyrosin auf, und mittels UV-Vis-Photometrie wurde der Proteinnnitrierungsgrad (ND) bestimmt. Dieser ist definiert als Verhältnis der mittleren Anzahl von Nitrotyrosinresten zur Tyrosinrest-Gesamtzahl in den Proteinmolekülen. BSA und OVA zeigten verschiedene Relationen zwischen ND und TNM/Tyrosin-Verhältnis im Reaktionsgemisch, was vermutlich auf Unterschiede in den Löslichkeiten und den molekularen Strukturen der beiden Proteine zurück zu führen ist.rnDie Nitrierung von BSA und OVA durch Exposition mit einem Gasgemisch aus Stickstoffdioxid (NO2) und Ozon (O3) wurde mit einer neu entwickelten HPLC-DAD-¬Analysemethode untersucht. Diese einfache und robuste Methode erlaubt die Bestimmung des ND ohne Hydrolyse oder Verdau der untersuchten Proteine und ernöglicht somit eine effiziente Untersuchung der Kinetik von Protein¬nitrierungs-Reaktionen. Für eine detaillierte Produktstudien wurden die nitrierten Proteine enzymatisch verdaut, und die erhaltenen Oligopeptide wurden mittels HPLC-MS/MS und Datenbankabgleich mit hoher Sequenzübereinstimmung analysiert. Die Nitrierungsgrade individueller Nitrotyrosin-Reste (NDY) korrelierten gut mit dem Gesamt-Proteinnitrierungsgrad (ND), und unterschiedliche Verhältnisse von NDY zu ND geben Aufschluss über die Regioselektivität der Reaktion. Die Nitrierungmuster von BSA und OVA nach Beahndlung mit TNM deuten darauf hin, dass die Nachbarschaft eines negativ geladenen Aminosäurerestes die Tyrosinnitrierung fördert. Die Behandlung von BSA durch NO2 und O3 führte zu anderend Nitrierungemustern als die Behandlung mit TNM, was darauf hindeutet, dass die Regioselektivität der Nitrierung vom Nitrierungsmittel abhängt. Es zeigt sich jedoch, dass Tyrosinreste in Loop-Strukturen bevorzugt und unabhängig vom Reagens nitriert werden.Die Methoden und Ergebnisse dieser Studie bilden eine Grundlage für weitere, detaillierte Untersuchungen der Reaktionskinetik sowie der Produkte und Mechanismen von Proteinnitrierungreaktionen. Sie sollen helfen, die Zusammenhänge zwischen verkehrsbedingten Luftschadstoffen wie Stickoxiden und Ozon und der Allergenität von Luftstaub aufzuklären.rn

Fracture Mechanics Investigation of Structures with Defects

Fracture mechanics plays an important role in the material science, structure design and industrial production due to the failure of materials and structures are paid high attention in human activities. This dissertation, concentrates on some of the fractural aspects of shaft and composite which have being increasingly used in modern structures, consists four chapters within two parts. Chapters 1 to 4 are included in part 1. In the first chapter, the basic knowledge about the stress and displacement fields in the vicinity of a crack tip is introduced. A review involves the general methods of calculating stress intensity factors are presented. In Chapter 2, two simple engineering methods for a fast and close approximation of stress intensity factors of cracked or notched beams under tension, bending moment, shear force, as well as torque are presented. New formulae for calculating the stress intensity factors are proposed. One of the methods named Section Method is improved and applied to the three dimensional analysis of cracked circular section for calculating stress intensity factors. The comparisons between the present results and the solutions calculated by ABAQUS for single mode and mixed mode are studied. In chapter 3, fracture criteria for a crack subjected to mixed mode loading of two-dimension and three-dimension are reviewed. The crack extension angle for single mode and mixed mode, and the critical loading domain obtained by SEDF and MTS are compared. The effects of the crack depth and the applied force ratio on the crack propagation angle and the critical loading are investigated. Three different methods calculating the crack initiation angle for three-dimension analysis of various crack depth and crack position are compared. It should be noted that the stress intensity factors used in the criteria are calculated in section 2.1.

Properties of cosmic voids in dark energy simulations

The last decade has witnessed the establishment of a Standard Cosmological Model, which is based on two fundamental assumptions: the first one is the existence of a new non relativistic kind of particles, i. e. the Dark Matter (DM) that provides the potential wells in which structures create, while the second one is presence of the Dark Energy (DE), the simplest form of which is represented by the Cosmological Constant Λ, that sources the acceleration in the expansion of our Universe. These two features are summarized by the acronym ΛCDM, which is an abbreviation used to refer to the present Standard Cosmological Model. Although the Standard Cosmological Model shows a remarkably successful agreement with most of the available observations, it presents some longstanding unsolved problems. A possible way to solve these problems is represented by the introduction of a dynamical Dark Energy, in the form of the scalar field ϕ. In the coupled DE models, the scalar field ϕ features a direct interaction with matter in different regimes. Cosmic voids are large under-dense regions in the Universe devoided of matter. Being nearby empty of matter their dynamics is supposed to be dominated by DE, to the nature of which the properties of cosmic voids should be very sensitive. This thesis work is devoted to the statistical and geometrical analysis of cosmic voids in large N-body simulations of structure formation in the context of alternative competing cosmological models. In particular we used the ZOBOV code (see ref. Neyrinck 2008), a publicly available void finder algorithm, to identify voids in the Halos catalogues extraxted from CoDECS simulations (see ref. Baldi 2012 ). The CoDECS are the largest N-body simulations to date of interacting Dark Energy (DE) models. We identify suitable criteria to produce voids catalogues with the aim of comparing the properties of these objects in interacting DE scenarios to the standard ΛCDM model, at different redshifts. This thesis work is organized as follows: in chapter 1, the Standard Cosmological Model as well as the main properties of cosmic voids are intro- duced. In chapter 2, we will present the scalar field scenario. In chapter 3 the tools, the methods and the criteria by which a voids catalogue is created are described while in chapter 4 we discuss the statistical properties of cosmic voids included in our catalogues. In chapter 5 the geometrical properties of the catalogued cosmic voids are presented by means of their stacked profiles. In chapter 6 we summarized our results and we propose further developments of this work.

Laser shock peening treatment to control and moderate fatigue crack growth in aircraft structure based on residual stress engineering approach

Laser Shock Peening (LSP) is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses of up to several mm underneath the surface of metal components in order to improve the detrimental effects of the crack growth behavior rate in it. The aim of this thesis is to predict the crack growth behavior in metallic specimens with one or more stripes which define the compressive residual stress area induced by the Laser Shock Peening treatment. The process was applied as crack retardation stripes perpendicular to the crack propagation direction with the object of slowing down the crack when approaching the peened stripes. The finite element method has been applied to simulate the redistribution of stresses in a cracked model when it is subjected to a tension load and to a compressive residual stress field, and to evaluate the Stress Intensity Factor (SIF) in this condition. Finally, the Afgrow software is used to predict the crack growth behavior of the component following the Laser Shock Peening treatment and to detect the improvement in the fatigue life comparing it to the baseline specimen. An educational internship at the “Research & Technologies Germany – Hamburg” department of AIRBUS helped to achieve knowledge and experience to write this thesis. The main tasks of the thesis are the following: •To up to date Literature Survey related to “Laser Shock Peening in Metallic Structures” •To validate the FE model developed against experimental measurements at coupon level •To develop design of crack growth slowdown in Centered Cracked Tension specimens based on residual stress engineering approach using laser peened strip transversal to the crack path •To evaluate the Stress Intensity Factor values for Centered Cracked Tension specimens after the Laser Shock Peening treatment via Finite Element Analysis •To predict the crack growth behavior in Centered Cracked Tension specimens using as input the SIF values evaluated with the FE simulations •To validate the results by means of experimental tests

Erfolgskontrolle in der kommunalen Wirtschaftsförderung : Analyse und Modifikation einer fragwürdigen Forderung

Seit Jahren werden Diskussionen über Erfolgskontrolle in der kommunalen Wirtschaftsförderung geführt. Im Vordergrund steht dabei die Suche nach Indikatoren und Verfahren, die es den kommunalen Wirtschaftsförderungen ermöglichen sollen, Erfolge zu messen. rnDa die Wirtschaftsförderung zu den freiwilligen Leistungen einer Gemeinde zählt, erhöht sich der Druck der Rechtfertigung gegenüber der Öffentlichkeit oder der Politik, das gilt insbesondere in Zeiten knapper öffentlicher Haushalte. Firmenansiedlungen, eine positive wirtschaftliche Entwicklung oder eine geringe Arbeitslosenquote sind sowohl im öffentlichen Bewusstsein als auch in der Politik wesentliche Kriterien einer erfolgreichen Wirtschaftsförderung. Sich ständig ändernde Rahmenbedingungen im wirtschaftsstrukturellen Gefüge haben dazu geführt, dass diese klassischen Nachweise von Erfolg immer seltener als solche präsentiert werden können. Erfolge sollten dennoch gemessen werden, um Maßnahmen und Instrumente einer kommunalen Wirtschaftsförderung zu überprüfen und gegebenenfalls an die geänderten Bedingungen anzupassen. rnEs ist schon mehr als 30 Jahre her, als in den 1970er Jahren die Suche nach Methoden und Verfahren der Erfolgskontrolle in der öffentlichen Verwaltung begann. Erfolge von kommunaler Wirtschaftsförderung können nicht einfach und ausschließlich an den markantesten wirtschaftlichen Ziffern der Kommune gemessen werden, z. B. der Zahl der sozialversicherungspflichtigen Arbeitsplätze. Seit Jahren wird um einen Lösungsweg bei der Durchführung von Erfolgskontrolle in der kommunalen Wirtschaftsförderung gerungen, abschließend wurde jedoch noch kein vollends befriedigend praktikabler Weg gefunden. Zu hinterfragen ist vor dem Hintergrund, inwiefern die vier Elemente einer Erfolgskontrolle, nämlich die Zielerreichungs-, Vollzugs-, Bedingungs- und Wirkungskontrolle, tatsächlich und hinreichend zum Einsatz kommen können.rnDie vorliegenden empirischen Untersuchungen beleuchten nun das Thema aus Sicht der kommunalen Wirtschaftsförderer und liefern Ergebnisse, die zu einem veränderten Bewusstsein gegenüber der Durchführung von Erfolgskontrolle in der kommunalen Wirtschaftsförderung führen müssten. Unabhängig von der Organisationsform und der Größe einer kommunalen Wirtschaftsförderung lässt sich empirisch nachweisen, dass der Anspruch, den der Begriff der Erfolgskontrolle in seiner gängigen Beschreibung erhebt, nicht hinreichend von einer kommunalen Wirtschaftsförderung erfüllt werden kann. rnMit Hilfe des neu entwickelten Prozesses einer modifizierten Erfolgskontrolle wird in vorliegender Arbeit ein idealtypischer Ablauf für eine kommunale Wirtschaftsförderung dargestellt. Der neue Ansatz einer modifizierten Erfolgskontrolle ist eine konsequente Reduzierung der Anforderungen auf das Praktikable und führt dazu, dass Erfolge der kommunalen Wirtschaftsförderung dargestellt werden können, ohne dass das Verfahren mehr Fragen offen lässt, als es beantwortet. Durch die modifizierte Erfolgskontrolle können die spezifischen Erfolge einer kommunalen Wirtschaftsförderung dargestellt und dokumentiert werden. rnEine modifizierte Erfolgskontrolle kann zweierlei: Sie ist eine Hilfestellung für die politisch Verantwortlichen bei der Erkenntnis, dass eine Notwendigkeit nach konkreten und der Ist-Situation sowie den Randbedingungen angepassten Zielformulierungen besteht. Sie bietet aber auch eine Möglichkeit, dass die kommunalen Wirtschaftsförderungseinrichtungen dem in der öffentlichen Diskussion formulierten Anspruch nach Erfolgskontrolle mit einem hohen Grad an Praktikabilität gerecht werden können. rnBevor also viele kommunale Wirtschaftsförderungen durch die fragwürdige Forderung an eine Erfolgskontrolle aufgrund der zu hohen Anforderungen an Methodik, Zeit und Personal aufgeben, sollte ihnen die Konzentration auf das Praktikable wieder Anreiz sein, eine modifizierte Erfolgskontrolle nach dem neuen Prozessschema in Angriff zu nehmen. rnrn

Engineering in Transition. Approaches, strategies and technologies for implementing system innovation towards sustainability

With the aim to provide people with sustainable options, engineers are ethically required to hold the safety, health and welfare of the public paramount and to satisfy society's need for sustainable development. The global crisis and related sustainability challenges are calling for a fundamental change in culture, structures and practices. Sustainability Transitions (ST) have been recognized as promising frameworks for radical system innovation towards sustainability. In order to enhance the effectiveness of transformative processes, both the adoption of a transdisciplinary approach and the experimentation of practices are crucial. The evolution of approaches towards ST provides a series of inspiring cases which allow to identify advances in making sustainability transitions happen. In this framework, the thesis has emphasized the role of Transition Engineering (TE). TE adopts a transdisciplinary approach for engineering to face the sustainability challenges and address the risks of un-sustainability. With this purpose, a definition of Transition Technologies is provided as a valid instruments to contribute to ST. In the empirical section, several transition initiatives have been analysed especially at the urban level. As a consequence, the model of living-lab of sustainability has crucially emerged. Living-labs are environments in which innovative technologies and services are co-created with users active participation. In this framework, university can play a key role as learning organization. The core of the thesis has concerned the experimental application of transition approach within the School of Engineering and Architecture of University of Bologna at Terracini Campus. The final vision is to realize a living-lab of sustainability. Particularly, a Transition Team has been established and several transition experiments have been conducted. The final result is not only the improvement of sustainability and resilience of the Terracini Campus, but the demonstration that university can generate solutions and strategies that tackle the complex, dynamic factors fuelling the global crisis.

Effect of Laser Shock Peening on Fatigue Crack Propagation of Aeronautical Structures

Laser Shock Peening (LSP) is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses up to several mm underneath the surface of metal components in order to improve the detrimental effects of crack growth behavior rate in it. The aim of this thesis is to predict the crack growth behavior of thin Aluminum specimens with one or more LSP stripes defining a compressive residual stress area. The LSP treatment has been applied as crack retardation stripes perpendicular to the crack growing direction, with the objective of slowing down the crack when approaching the LSP patterns. Different finite element approaches have been implemented to predict the residual stress field left by the laser treatment, mostly by means of the commercial software Abaqus/Explicit. The Afgrow software has been used to predict the crack growth behavior of the component following the laser peening treatment and to detect the improvement in fatigue life comparing to the specimen baseline. Furthermore, an analytical model has been implemented on the Matlab software to make more accurate predictions on fatigue life of the treated components. An educational internship at the Research and Technologies Germany- Hamburg department of Airbus helped to achieve knowledge and experience to write this thesis. The main tasks of the thesis are the following: -To up to date Literature Survey related to laser shock peening in metallic structures -To validate the FE models developed against experimental measurements at coupon level -To develop design of crack growth slow down in centered and edge cracked tension specimens based on residual stress engineering approach using laser peened patterns transversal to the crack path -To predict crack growth behavior of thin aluminum panels -To validate numerical and analytical results by means of experimental tests.

Hypersonic phonon propagation in mesoscopic systems by Brillouin spectroscopy

Phononic crystals, capable to block or direct the propagation of elastic/acoustic waves, have attracted increasing interdisciplinary interest across condensed matter physics and materials science. As of today, no generalized full description of elastic wave propagation in phononic structures is available, mainly due to the large number of variables determining the band diagram. Therefore, this thesis aims for a deeper understanding of the fundamental concepts governing wave propagation in mesoscopic structures by investigation of appropriate model systems. The phononic dispersion relation at hypersonic frequencies is directly investigated by the non-destructive technique of high-resolution spontaneous Brillouin light scattering (BLS) combined with computational methods. Due to the vector nature of the elastic wave propagation, we first studied the hypersonic band structure of hybrid superlattices. These 1D phononic crystals composed of alternating layers of hard and soft materials feature large Bragg gaps. BLS spectra are sensitive probes of the moduli, photo-elastic constants and structural parameters of the constituent components. Engineering of the band structure can be realized by introduction of defects. Here, cavity layers are employed to launch additional modes that modify the dispersion of the undisturbed superlattice, with extraordinary implications to the band gap region. Density of states calculations in conjunction with the associated deformation allow for unambiguous identication of surface and cavity modes, as well as their interaction with adjacent defects. Next, the role of local resonances in phononic systems is explored in 3D structures based on colloidal particles. In turbid media BLS records the particle vibration spectrum comprising resonant modes due to the spatial confinement of elastic energy. Here, the frequency and lineshapes of the particle eigenmodes are discussed as function of increased interaction and departure from spherical symmetry. The latter is realized by uniaxial stretching of polystyrene spheres, that can be aligned in an alternating electric field. The resulting spheroidal crystals clearly exhibit anisotropic phononic properties. Establishing reliable predictions of acoustic wave propagation, necessary to advance, e.g., optomechanics and phononic devices is the ultimate aim of this thesis.

Cerium oxide nanoparticle uptake kinetics from the gas-phase into lung cells in vitro is transport limited

Nowadays, aerosol processes are widely used for the manufacture of nanoparticles (NPs), creating an increased occupational exposure risk of workers, laboratory personnel and scientists to airborne particles. There is evidence that possible adverse effects are linked with the accumulation of NPs in target cells, pointing out the importance of understanding the kinetics of particle internalization. In this context, the uptake kinetics of representative airborne NPs over 30 min and their internalization after 24 h post-exposure were investigated by the use of a recently established exposure system. This system combines the production of aerosolized cerium oxide (CeO(2)) NPs by flame spray synthesis with its simultaneous particle deposition from the gas-phase onto A549 lung cells, cultivated at the air-liquid interface. Particle uptake was quantified by mass spectrometry after several exposure times (0, 5, 10, 20 and 30 min). Over 35% of the deposited mass was found internalized after 10 min exposure, a value that increased to 60% after 30 min exposure. Following an additional 24 h post-incubation, a time span, after which adverse biological effects were observed in previous experiments, over 80% of total CeO(2) could be detected intracellularly. On the ultrastructural level, focal cerium aggregates were present on the apical surface of A549 cells and could also be localized intracellularly in vesicular structures. The uptake behaviour of aerosolized CeO(2) is in line with observations on cerium suspensions, where particle mass transport was identified as the rate-limiting factor for NP internalization.

Characterization of the first FGFRL1 mutation identified in a craniosynostosis patient

Fibroblast growth factor receptor-like 1 (FGFRL1) is a recently discovered transmembrane protein whose functions remain unclear. Since mutations in the related receptors FGFR1-3 cause skeletal malformations, DNA samples from 55 patients suffering from congenital skeletal malformations and 109 controls were searched for mutations in FGFRL1. One patient was identified harboring a frameshift mutation in the intracellular domain of this novel receptor. The patient showed craniosynostosis, radio-ulnar synostosis and genital abnormalities and had previously been diagnosed with Antley-Bixler syndrome. The effect of the FGFRL1 mutation was studied in vitro. In a reporter gene assay, the wild-type as well as the mutant receptor inhibited FGF signaling. However, the mutant protein differed from the wild-type protein in its subcellular localization. Mutant FGFRL1 was mainly found at the plasma membrane where it interacted with FGF ligands, while the wild-type protein was preferentially located in vesicular structures and the Golgi complex. Two motifs from the intracellular domain of FGFRL1 appeared to be responsible for this differential distribution, a tandem tyrosine based motif and a histidine-rich sequence. Deletion of either one led to the preferential redistribution of FGFRL1 to the plasma membrane. It is therefore likely that mutant FGFRL1 contributes to the skeletal malformations of the patient.

Theoretical estimation of optical absorption and photoluminescence in nanostructured silicon; an approach to improve efficiency in nanostructured solar cells

Renewable energy is growing in demand, and thus the the manufacture of solar cells and photovoltaic arrays has advanced dramatically in recent years. This is proved by the fact that the photovoltaic production has doubled every 2 years, increasing by an average of 48% each year since 2002. Covering the general overview of solar cell working, and its model, this thesis will start with the three generations of photovoltaic solar cell technology, and move to the motivation of dedicating research to nanostructured solar cell. For the current generation solar cells, among several factors, like photon capture, photon reflection, carrier generation by photons, carrier transport and collection, the efficiency also depends on the absorption of photons. The absorption coefficient,α, and its dependence on the wavelength, λ, is of major concern to improve the efficiency. Nano-silicon structures (quantum wells and quantum dots) have a unique advantage compared to bulk and thin film crystalline silicon that multiple direct and indirect band gaps can be realized by appropriate size control of the quantum wells. This enables multiple wavelength photons of the solar spectrum to be absorbed efficiently. There is limited research on the calculation of absorption coefficient in nano structures of silicon. We present a theoretical approach to calculate the absorption coefficient using quantum mechanical calculations on the interaction of photons with the electrons of the valence band. One model is that the oscillator strength of the direct optical transitions is enhanced by the quantumconfinement effect in Si nanocrystallites. These kinds of quantum wells can be realized in practice in porous silicon. The absorption coefficient shows a peak of 64638.2 cm-1 at = 343 nm at photon energy of ξ = 3.49 eV ( = 355.532 nm). I have shown that a large value of absorption coefficient α comparable to that of bulk silicon is possible in silicon QDs because of carrier confinement. Our results have shown that we can enhance the absorption coefficient by an order of 10, and at the same time a nearly constant absorption coefficient curve over the visible spectrum. The validity of plots is verified by the correlation with experimental photoluminescence plots. A very generic comparison for the efficiency of p-i-n junction solar cell is given for a cell incorporating QDs and sans QDs. The design and fabrication technique is discussed in brief. I have shown that by using QDs in the intrinsic region of a cell, we can improve the efficiency by a factor of 1.865 times. Thus for a solar cell of efficiency of 26% for first generation solar cell, we can improve the efficiency to nearly 48.5% on using QDs.