Investigation of organic xenobiotic transfers, partitioning and processing in air-soil-plant systems using a microcosm apparatus. Part I:Microcosm development

A microcosm system was developed to investigate transfers of organic xenobiotics in air-soil-plant systems. This was validated using ¹⁴C labelled 1,2-dichlorobenzene (DCB) as a model compound. Trapping efficiency was 106 ± 3% for volatile compounds and 93.0 ± 2.2% for carbon dioxide in a blank microcosm arrangement. Recovery of 1,2-dichlorobenzene spiked to grassed and unplanted soils was > 90% after 1 week. The predominant DCB loss process was volatilisation with no evidence for mineralisation over 1 week and 20-30% of the added spike remained in soil. Although there was no evidence for root uptake and translocation of added label, foliar uptake of soil volatilised compound was detected. The microcosm showed good potential for study of ¹⁴C labelled and unlabelled organic xenobiotic transfers in air-soil-plant systems with single plants and also intact planted cores.

Simulating reinforced concrete members. Part 2: displacement-based analyses

A companion paper described the partial-interaction localised properties that require the development of pseudo properties. If the quantification through experimental testing of these pseudo properties could be removed by the use of mechanics-based models, which is the subject of this paper, then this would: (a) substantially reduce the cost of developing new reinforced concrete products by reducing the amount of testing; (b) increase the accuracy of designing existing and novel reinforced concrete members and structures, bearing in mind that experimentally derived pseudo properties are only applicable within the range of the testing from which they were derived; and (c) reduce the cost and increase the accuracy of developing reinforced concrete design rules. This paper deals with the development of pseudo properties and behaviours directly through mechanics, as opposed to experimental testing, and their incorporation into member global simulations. It also addresses the need for a fundamental shift to displacement-based analyses as opposed to strain-based analyses.

Simulating reinforced concrete members. Part 1: partial interaction properties

Reinforced concrete members are extremely complex under loading because of localised deformations in the concrete (cracks, sliding planes) and between the reinforcement and concrete (slip). An ideal model for simulating behaviour of reinforced concrete members should incorporate both global behaviour and the localised behaviours that are seen and measured in practice; these localised behaviours directly affect the global behaviour. Most commonly used models do not directly simulate these localised behaviours that can be seen or measured in real members; instead, they overcome these limitations by using empirically or semi-empirically derived strain-based pseudo properties such as the use of effective flexural rigidities for deflection; plastic hinge lengths for strength and ductility; and energy-based approaches for both concrete softening in compression and concrete softening after tensile cracking to allow for tension stiffening. Most reinforced concrete member experimental testing is associated with deriving these pseudo properties for use in design and analysis, and this component of development is thus costly. The aim of the present research is to reduce this cost substantially. In this paper, localised material behaviours and the mechanisms they induce are described. Their incorporation into reinforced concrete member behaviour without the need for empirically derived pseudo properties is described in a companion paper.

Empathy in UK pharmacy students: assessing differences by gender, level in the degree programme, part-time employment and medical status

Background: Empathy is an important aspect of patient–healthcare professional interactions.Aims: To investigate whether gender, level in the degree programme, employment and health status affected empathy scores of undergraduate pharmacy students.Method: All undergraduate pharmacy students (n=529) at Queen’s University Belfast were invited via email to completean online validated empathy questionnaire. Empathy scores were calculated and non-parametric tests used to determine associations between factors.Results: Response rate was 60.1% (318/529) and the mean empathy score was 106.19. Scores can range from 20 to 140,with higher scores representing a greater degree of empathy. There was no significant difference between genders (p=0.211). There was a significant difference in scores across the four levels of the programme (p<0.001); scores were lowest at Level 1 and greatest at Level 4 (final year). There were no significant differences in scores for respondents who had a part-time job, a chronic condition, or took regular medication in comparison to those who did not (p=0.028,p=0.880, p=0.456, respectively).Conclusion: A reasonable level of empathy was found relative to other studies; this could be further enhanced at lower levels of the degree pathway.

POINTS OF VIEW: Multi-Roling Performance in Ireland in the 1990s, Part 1 (Layering)

This series of posts will consider the acting techniques required for this style of performance with reference to four productions from the 1990s in which two actors took on multiple roles: Frank Pig Says Hello (1992), Co-Motion’s stage adaptation of Pat McCabe’s novel; The Butcher Boy, Corca Dorca’s production of Disco Pigs (1996) by Enda Walsh; DubbleJoint’s production of Stones in his Pockets by Marie Jones (1996) and its subsequent award-winning revival which I produced at Belfast’s Lyric Theatre in 1999; and Kabosh’s production of Mojo Mickybo by Owen McCafferty (1998). The discussion will focus primarily on my own empirical exploration of the demands multi-roling places on an actor through the direction of recent revivals of Mojo Mickybo for Belfast’s Chatterbox Theatre Company (2013) and Bedlam Productions (2015).

A Computational Approach for Simulating P-type Silicon Piezoresistor Using Four Point Bending Setup

The piezoresistance effect is defined as change in resistance due to applied stress. Silicon has a relatively large piezoresistance effect which has been known since 1954. A four point bending setup is proposed and designed to analyze the piezoresistance effect in p-type silicon. This setup is used to apply uniform and uniaxial stress along the <110> crystal direction. The main aim of this work is to investigate the piezoresistive characteristic of p-type resistors as a function of doping concentrations using COMSOL Multiphysics. Simulation results are compared with experimental data.

POINTS OF VIEW: Multi-Roling Performance in Ireland in the 1990s, Part 2 (Characterisation)

The 1990s in Ireland saw a series of highly successful theatre productions in which actors played a multiplicity of roles. This has often been attributed to the economic exigencies of the times, but it also depended on the availability of flexible actors with the physical and psychological capacity to embody a wide range of identifiable characters within the one production.

This second of two posts considers the acting techniques required for this style of performance in relation to the differentiation of one character from another. The discussion will focus primarily on my own empirical exploration of the demands multi-roling places on an actor through the direction of recent revivals of Mojo Mickybo for Belfast’s Chatterbox Theatre Company (2013) and Bedlam Productions (2015).

Two-part Segmentation of Text Documents

We consider the problem of segmenting text documents that have a
two-part structure such as a problem part and a solution part. Documents
of this genre include incident reports that typically involve
description of events relating to a problem followed by those pertaining
to the solution that was tried. Segmenting such documents
into the component two parts would render them usable in knowledge
reuse frameworks such as Case-Based Reasoning. This segmentation
problem presents a hard case for traditional text segmentation
due to the lexical inter-relatedness of the segments. We develop
a two-part segmentation technique that can harness a corpus
of similar documents to model the behavior of the two segments
and their inter-relatedness using language models and translation
models respectively. In particular, we use separate language models
for the problem and solution segment types, whereas the interrelatedness
between segment types is modeled using an IBM Model
1 translation model. We model documents as being generated starting
from the problem part that comprises of words sampled from
the problem language model, followed by the solution part whose
words are sampled either from the solution language model or from
a translation model conditioned on the words already chosen in the
problem part. We show, through an extensive set of experiments on
real-world data, that our approach outperforms the state-of-the-art
text segmentation algorithms in the accuracy of segmentation, and
that such improved accuracy translates well to improved usability
in Case-based Reasoning systems. We also analyze the robustness
of our technique to varying amounts and types of noise and empirically
illustrate that our technique is quite noise tolerant, and
degrades gracefully with increasing amounts of noise

Generalized collisional radiative model for light elements. Part B: Data for the Be isonuclear sequence

A first-stage collision database is assembled which contains electron-impact excitation, ionization, and recombination rate coefficients for Be, Be+, Be2+, and Be3+. The first-stage database is constructed using the R-matrix with pseudo-states, time-dependent close-coupling, and perturbative, distorted-wave methods. A second-stage collision database is then assembled which contains generalized collisional-radiative and radiated power loss coefficients. The second-stage database is constructed by solution of collisional-radiative equations in the quasi-static equilibrium approximation using the first-stage database. Both collision database stages reside in electronic form at the ORNL Controlled Fusion Atomic Data Center and in the ADAS database, and are easily accessed over the worldwide internet. © 2007 Elsevier Inc. All rights reserved.

Bending effects on a textile microstrip antenna

This paper describes the design of a textile microstrip antenna for 2.4 GHz. Two different fabrics are used: one for the dielectric part and another one for the conductor part. The dielectric constant of the dielectric fabric is determined experimentally. The input matching is studied by electromagnetic simulation and experimentally. Since the antenna is meant to be incorporated in the user's clothe, the effect that the antenna bending has on the matching level is also investigated both theoretically and experimentally.

Analyse du chapitre de la Critique de la raison pure intitulé « Du principe de la distinction de tous les objets en général en phénomènes et noumènes »

Le but de ce mémoire est d’effectuer une analyse détaillée de ce chapitre de la Critique de la raison pure de Kant à partir de l’idée qu’il présente les « résultats » de la démarche critique menée jusque-là concernant les limites de la connaissance. Le mémoire sera divisé en deux parties. Dans la première partie, nous montrerons que ce chapitre dresse un bilan provisoire et que pour cette raison il soulève deux enjeux : 1 – montrer que les concepts purs de l'entendement – en dépit de leur caractère a priori et de leur origine dans l'entendement pur – ne sont susceptibles d'un usage objectif qu'appliqués aux données de la sensibilité (A 246/B 303 : « L'Analytique transcendantale a donc cet important résultat... ») ; 2 – montrer que, à son tour, la sensibilité est elle-même limitée par l'entendement et qu'elle ne renferme pas la totalité des objets possibles (A 251 : « Tel a été le résultat de toute l'Esthétique transcendantale... »). Dans la seconde partie, nous analyserons les différences entre les deux éditions de la Critique de la raison pure concernant ce chapitre en insistant tout particulièrement sur la distinction faite dans la deuxième édition entre noumène au sens positif et noumène au sens négatif.